← New search

2017 Land Rover Discovery Sport

Owner reports · Recalls · Investigations

Limited comparison data

There is not enough comparable history to draw a useful model-year comparison.

About this comparison →

How this year compares

Owner complaints by model year

Other model years Selected year
Compare all Discovery Sport years →

Counts vary with age, sales and reporting. They are not failure rates.

What owners reported most

All reported categories

Tap a category to read its complaints. One report may name several components.

When problems were reported

Mileage at the reported incident

Limited mileage data: 17 of 39 reports include usable mileage. There isn’t enough coverage to show a useful chart.

NHTSA’s mileage field refers to the reported incident, not necessarily the filing date. This shows report counts, not the likelihood of a failure.

What to inspect

Issues worth paying extra attention to based on owner reports.

  • Engine. Review the 15 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
  • Electrical System. Review the 6 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
  • Service Brakes. Review the 6 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →

NHTSA owner reports · September 18, 2026 snapshot.

0 crash reports0 fire reports0 injury reports

Steering complaints

5 reports
Clear category filter
Mileage unknown · Mar 10, 2026
Steering

Total loss of power steering. Was able to avoid crash but extremely dangerous. Has to get it towed to dealer $6,800 fix for total rack replacement due to bolts sheering off from EPS. Research shows this is a known issue due to faulty aluminum bolts in areas that salt roads.

NHTSA ODI #11723191

Mileage unknown · Oct 25, 2024
Power TrainSteering

Timing chain broke while driving ~30 MPH on [XXX] [xxx]around 2:30pm pt. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

NHTSA ODI #11621958

64,271 miles · Jan 26, 2024
Steering

The contact owns a 2017 Land Rover Discovery Sport. The contact stated that while reversing from a parking spot, the steering wheel seized. There was an abnormal screeching sound detected. There were no warning lights illuminated. The vehicle was taken to an independent mechanic, and the contact was informed that the failure was…

Read full complaint

The contact owns a 2017 Land Rover Discovery Sport. The contact stated that while reversing from a parking spot, the steering wheel seized. There was an abnormal screeching sound detected. There were no warning lights illuminated. The vehicle was taken to an independent mechanic, and the contact was informed that the failure was due to the steering rack and the motor had disconnected. The local dealer was not contacted. The vehicle was not diagnosed or repaired. The manufacturer was contacted, but no assistance was provided. The failure mileage was approximately 64,271.

NHTSA ODI #11568026

Mileage unknown · Mar 20, 2022
Power TrainSteeringWheels

Went to change lanes on highway heard a clunk and lost control of steering. Limped it to off ramp and steering was completely broken. There is only 43000 miles on this and I bought it at 39000

NHTSA ODI #11457501

31,000 miles · Dec 19, 2018
Electrical SystemEngineSteering

I WAS DRIVING FROM WESTCHESTER COUNTY, NY TO LONG ISLAND VIA I-695 HEADING TOWARD THE THROGS NECK BRIDGE ON 12/12/18. I WAS IN THE LEFT LANE JUST BEFORE THE LAST EXIT BEFORE THE BRIDGE WHEN MY DASHBOARD WENT DARK, THE RED BATTERY LIGHT (BELOW THE SPEEDOMETER) CAME ON, I LOST POWER AND STEERING. LUCKILY A SMALL SHOULDER OPENED …

Read full complaint

I WAS DRIVING FROM WESTCHESTER COUNTY, NY TO LONG ISLAND VIA I-695 HEADING TOWARD THE THROGS NECK BRIDGE ON 12/12/18. I WAS IN THE LEFT LANE JUST BEFORE THE LAST EXIT BEFORE THE BRIDGE WHEN MY DASHBOARD WENT DARK, THE RED BATTERY LIGHT (BELOW THE SPEEDOMETER) CAME ON, I LOST POWER AND STEERING. LUCKILY A SMALL SHOULDER OPENED UP AND I WAS ABLE TO TUG THE WHEEL LEFT TO GET INTO THE SHOULDER BEFORE MY CAR COMPLETELY ROLLED TO A STOP. I AVOIDED A CRASH BUT IT WAS LUCK. I HAD TO BE TOWED OFF THE HIGHWAY AND BACK TO THE DEALER. CLEARLY THIS WAS NO BATTERY ISSUE (AS DRIVING RECHARGES A BATTER). THE DEALER'S SERVICE CENTER DIAGNOSED IT AS A DISCONNECTED VACUUM LINE. THE REPAIR NOTES INDICATE THAT IT WAS RECONNECTED USING A "ZIP TIE." WHEN I INQUIRED ABOUT WHETHER THAT WAS THE APPROPRIATE FIX, THE DEALER SENT ME LR'S TECHNICAL SERVICE BULLETIN DESCRIBING THE REPAIR FOR A CERTAIN RANGE OF VINS, INCLUDING MINE. THE ZIP TIE IS THE LAST STEP - THE BULLETIN ALSO SAYS THE LOCKING RING NEEDS TO BE DISCARDED AND A NEW ONE INSTALLED. THE DEALER STILL HAS NOT CONFIRMED WITH ME (2 DAYS LATER) THAT THEY DID THIS. IN ANY EVENT, THIS IS MORE THAN A TECHNICAL SERVICE ISSUE; THIS COULD BE A LIFE OR DEATH ISSUE THAT WARRANTS A RECALL FOR AFFECTED VEHICLES.

NHTSA ODI #11162489

Official recalls

2

16V942000 · Seat Belts:pretensioner

Dec 29, 2016

Jaguar Land Rover North America, LLC (Land Rover) is recalling certain model year 2017 Land Rover Discovery Sport vehicles and 2016-2017 Land Rover Range Rover and Range Rover Sport vehicles. The affected vehicles have seatbelt pretensioners that may not function properly in the event of a crash.

Consequence & remedy

Consequence: If the front seat seatbelt pretensioners do not function properly, the seat occupants may not be adequately restrained in the event of a crash, increasing the risk of injury.

Remedy: Land Rover will notify owners, and dealers will inspect the front seat belt assemblies, replacing them as necessary, free of charge. The recall began February 20, 2017. Owners may contact Land Rover customer service at 1-800-637-6837. Land Rover's number for this recall is P095.

16V889000 · Suspension:front:control Arm:lower Arm

Dec 9, 2016

Jaguar Land Rover North America, LLC (Land Rover) is recalling certain model year 2016-2017 Land Rover Discovery Sport vehicles manufactured May 30, 2016, to August 24, 2016, and 2016-2017 Range Rover Evoque vehicles manufactured June 7, 2016, to August 26, 2016. The affected vehicles have front lower control arm fasteners that may fail due to an assembly error, possibly resulting in separation of the steering knuckle.

Consequence & remedy

Consequence: If the fasteners were to fail causing the knuckle to separate, vehicle handling may be affected, increasing the risk of a crash.

Remedy: Land Rover will notify owners, and dealers will replace the hardware that connects the front lower control arm to the knuckle, free of charge. The recall began on January 27, 2017. Owners may contact Land Rover customer service at 1-800-637-6837. Land Rover's number for this recall is Q650/Q651.

Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗

NHTSA investigations

1

EA21002 · Desiccated Air Bag Inflator Rupture

Opened Sep 17, 2021 · No close date supplied

Status: open (inferred from source dates) · Air Bags:frontal:driver Side:inflator Module; Air Bags:frontal:passenger Side:inflator Module

From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.

Additional source detail variants (2)

Air Bags:frontal:driver Side:inflator Module

From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.

Air Bags:frontal:passenger Side:inflator Module

From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.