IllustrationWHILE DRIVING VEHICLE CONTINUES TO ACCELERATE WHEN APPLYING THE BRAKES, CAUSE UNKNOWN. PLEASE GIVE ANY FURTHER DETAILS. *AK
1990 Jeep Cherokee
Owner reports · Recalls · Investigations
More warning signs than most Cherokee years
Owner complaints for the 1990 Jeep Cherokee are substantially higher than the model-year median of 113.
About this comparison →How this year compares
Owner complaints by model year
Compare all Cherokee years →Counts vary with age, sales and reporting. They are not failure rates.
What owners reported most
All reported categories
Tap a category to read its complaints. One report may name several components.
When problems were reported
Mileage at the reported incident
Limited mileage data: 21 of 270 reports include usable mileage. There isn’t enough coverage to show a useful chart.
NHTSA’s mileage field refers to the reported incident, not necessarily the filing date. This shows report counts, not the likelihood of a failure.
What to inspect
Issues worth paying extra attention to based on owner reports.
- Service Brakes, Hydraulic. Review the 143 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
- Vehicle Speed Control. Review the 54 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
- Engine And Engine Cooling. Review the 28 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
NHTSA owner reports · September 18, 2026 snapshot.
15 crash reports11 fire reports7 injury reports
Vehicle Speed Control complaints
54 reportsVEHICLE EXPERIENCING BRAKE FAILURE WHICH RESULTS IN EXCESSIVE FORCE WHEN TRYING TO ACCELERATE / DECELERATE. *YC
JEEP WILL IDLE FAST UNEXPECTEDLY (2000-4000 RPM). NEEDED TO REMOVE IDLE CONTROL VALVE AND SCRUB CLEAN, AS HIGH IDLE SPEED IS DUE TO THE ROD STICKING IN THE THROTTLE BODY. WAS STOPPED AT LIGHT DURING SNOWSTORM WITH FAMILY WHEN REAR WHEELS BEGAN TO SPIN. PLACED JEEP IN NEUTRAL AND IDLE WAS OVER 3000 RPM. CAREFULLY COMPLETED TRIP H…
Read full complaint
JEEP WILL IDLE FAST UNEXPECTEDLY (2000-4000 RPM). NEEDED TO REMOVE IDLE CONTROL VALVE AND SCRUB CLEAN, AS HIGH IDLE SPEED IS DUE TO THE ROD STICKING IN THE THROTTLE BODY. WAS STOPPED AT LIGHT DURING SNOWSTORM WITH FAMILY WHEN REAR WHEELS BEGAN TO SPIN. PLACED JEEP IN NEUTRAL AND IDLE WAS OVER 3000 RPM. CAREFULLY COMPLETED TRIP HOME (LESS THAN 1 MILE) AND THOROUGHLY CLEANED IDLE CONTROL VALVE. HAS HAPPENED 3 TIMES SINCE. DESIGN FLAW IN CHRYSLER'S THROTTLE BODY. CHRYSLER SEEMS TO BLAME THIS PROBLEM ON 'WRONG PEDAL APPLICATION', BUT I HAVE SHOWN OTHERWISE, AS WHEN THE HIGH IDLE OCCURRED, I WAS STOPPED AT A LIGHT WITH MY FOOT FIRMLY ON THE BRAKE PEDAL.
10 TO 15 ESCOND CRANKING TO START, ON START UP IDLES AT 2000 TO 2500 RPM'S FOR 2 TO 4 MINUTES, DOOR LOCK ACTUATORS WONT LOCK OR UNLOCK DOOR OR REAR HATCH, LINKAGE BINDS, NO BACK UP LIGHTS, BOTH FT WIND WING WINDOWS LEAK AIR & WATER, CLUNKING WHEN STARTING & STOPPING FROM TRANSMISSION AREA, FUEL PUMP NOISY, FUEL INJECTORS LEAK R…
Read full complaint
10 TO 15 ESCOND CRANKING TO START, ON START UP IDLES AT 2000 TO 2500 RPM'S FOR 2 TO 4 MINUTES, DOOR LOCK ACTUATORS WONT LOCK OR UNLOCK DOOR OR REAR HATCH, LINKAGE BINDS, NO BACK UP LIGHTS, BOTH FT WIND WING WINDOWS LEAK AIR & WATER, CLUNKING WHEN STARTING & STOPPING FROM TRANSMISSION AREA, FUEL PUMP NOISY, FUEL INJECTORS LEAK RAW FUEL ON HOT DAYS *AK
RECALL 90V-177 000/ FUEL INJECTION: IDLE SPEED CONTROL VALVE. DEFECT REOCCURRED AT 40,0000 MILES. FUEL INJECTION MALFUNCTIONIONED PRIOR TO/AFTER RECALL REPAIRS, CAUSING INTERMITTENT HIGH ENGINE IDLE SPEED. DEALER /MANUFACTURER NOTIFIED AND INFORMED CONSUMER THAT NOTHING WOULD BE DONE UNLESS COST GOES TO CONSUMER. SEEKING HE…
Read full complaint
RECALL 90V-177 000/ FUEL INJECTION: IDLE SPEED CONTROL VALVE. DEFECT REOCCURRED AT 40,0000 MILES. FUEL INJECTION MALFUNCTIONIONED PRIOR TO/AFTER RECALL REPAIRS, CAUSING INTERMITTENT HIGH ENGINE IDLE SPEED. DEALER /MANUFACTURER NOTIFIED AND INFORMED CONSUMER THAT NOTHING WOULD BE DONE UNLESS COST GOES TO CONSUMER. SEEKING HELP FROM NHTSA IN THIS MATTER. *AK
MY VEHICLE HAD A STICKER INDICATING THAT THE TPS RECALL HAD BEEN COMPLETED PRIOR TO MY OWNERSHIP. I HAVE BEEN EXPERIENCING THE SAME PROBLEMS WITH THE TPS THAT CAUSED THE ORIGINAL RECALL ON THE PART. THE THROTTLE POSITION SENSOR HAS BEEN CAUSING INTERMITTENT HIGH ENGINE IDLE SPEEDS IMMEDIATELY AFTER STARTING THE ENGINE. THE IDLE …
Read full complaint
MY VEHICLE HAD A STICKER INDICATING THAT THE TPS RECALL HAD BEEN COMPLETED PRIOR TO MY OWNERSHIP. I HAVE BEEN EXPERIENCING THE SAME PROBLEMS WITH THE TPS THAT CAUSED THE ORIGINAL RECALL ON THE PART. THE THROTTLE POSITION SENSOR HAS BEEN CAUSING INTERMITTENT HIGH ENGINE IDLE SPEEDS IMMEDIATELY AFTER STARTING THE ENGINE. THE IDLE CANNOT BE REDUCED BY TAPPING THE GAS PEDAL. THE RPMS CONTINUE TO INCREASE UNTIL I TURN MY VEHICLE OFF. I HAVE TO RESTART THE ENGINE ANYWHERE FROM 1 TO 6 TIMES BEFORE I CAN GET A NORMAL IDLE SPEED. I HAVE HAD SEVERAL INSTANCES WHERE THE IDLE SPEED HAS INCREASED WHEN I PLACED IT IN GEAR. IT HAS BEEN SO BAD THAT EVEN WITH MY FOOT COMPLETELY PRESSED ON THE BRAKE THE CAR STILL MOVES. THIS IS COMPLETELY UNSAFE AND I FEEL THAT THIS PART SHOULD BE REPLACED WITH ONE THAT ACTUALLY WORKS RIGHT. I AM WONDERING WHETHER THE ORIGINAL PART WAS ACTUALLY REPLACED WHEN THE RECALL WAS SUPPOSEDLY COMPLETED ON THIS VEHICLE OR WHETHER THE REPLACEMENT PART IS JUST AS FAULTY AND DANGEROUS AS THE ORIGINAL. I HAVE TAKEN MY JEEP TO SEVERAL MECHANICS FOR THIS AND A NUMBER OF OTHER PROBLEMS SINCE I PURCHASED IT A YEAR AGO. SO FAR EVERYONE I'VE TAKEN IT TO INCLUDING THE CERTIFIED JEEP DEALER/ SERVICE IN CHICO, CA., COURTESY MOTORS HAS TOLD ME THAT THE TPS IS MALFUNCTIONING AND CAUSING MY CAR TO ACCELERATE AT ITS OWN WILL. I TOOK MY CAR TO THE DEALER ON AUGUST 10, 1999 FOR A COMPLETE DIAGNOSTIC CHECK AND WAS TOLD THAT, AMONG A SERIOSLY LONG LIST OF OTHER THINGS, THIS PART WAS SERIOUSLY MALFUNCTIONING AND NEEDS TO BE REPLACED. ANOTHER ASC CERTIFIED MECHANIC AT GRAND AUTO IN CHICO TOLD ME TODAY THAT THIS PART SHOULD DEFINITELY BE REPLACEABLE UNDER THE ORIGINAL RECALL: NHTSA CAMPAIGN ID NUMBER: 90V177000 FOR REPLACEMENT OF THE FUEL INJECTION IDLE SPEED CONTROL UNIT. PLEASE CALL ME AT YOUR EARLIEST CONVENIENCE AT : (530)893-0684 HOME OR (530)218-4826 WORK . THANK YOU. SINCERELY, DEBORAH DAVIS
I HAD FOUND THESE MALFUNCTIONS ON THE INTERNET UNDER THE WB56.COM ON THE RECALL SECTION. UNDER 1990 JEEP CHEROKEE
THROTTLE PEDAL IS STICKING, CAUSING UNWANTED ACCELERATION. CONSUMER HAS CONTACTED THE DEALER; DEALER REFUSED TO CORRECT THE PROBLEM . NHTSA RECALL 97I-002. *AK
VEHICLE STALLS AT ALL SPEEDS, ESPECIALLY WHEN HITTING BUMPS AND PARKED ON HILLS. SHUTS OFF AT IDLE, SHUTTING DOWN MOTOR/POWER STEERING/BRAKES, ETC. SHUTS OFF AND RESTARTS WHEN AT SPEED, CAUSING SEVERE BUCKING/JERKING.
I SENT TWO COMPLAINTS IN LETTER FORM. ONE WAS IN JANUARY TO THE DOT IN WASHINGTON DC, AND I SENT ANOTHER LETTER TO THE NHTSA OFFICE IN WHITE PLAINS, NY ON APRIL 5TH. PLEASE CONTACT ME BY PHONE OR EMAIL BECAUSE THIS HAS BEEN AN ONGOING PROBLEM WITH MY JEEP THAT IS A SAFETY HAZARD TO ALL OTHER DRIVERS AND MYSELF. CHRYSLER FAILS TO…
Read full complaint
I SENT TWO COMPLAINTS IN LETTER FORM. ONE WAS IN JANUARY TO THE DOT IN WASHINGTON DC, AND I SENT ANOTHER LETTER TO THE NHTSA OFFICE IN WHITE PLAINS, NY ON APRIL 5TH. PLEASE CONTACT ME BY PHONE OR EMAIL BECAUSE THIS HAS BEEN AN ONGOING PROBLEM WITH MY JEEP THAT IS A SAFETY HAZARD TO ALL OTHER DRIVERS AND MYSELF. CHRYSLER FAILS TO SEE THE IMPORTANCE OF THIS ISSUE, AND I HAVE GOTTEN NOWHERE WITH THEIR INADEQUATE CUSTOMER SERVICE. *AK
Official recalls
598V005000 · Service Brakes, Hydraulic:foundation Components:disc:rotor
Jan 12, 1998
VEHICLE DESCRIPTION: PASSENGER AND MULTI-PURPOSE VEHICLES ORIGINALLY SOLD OR CURRENTLY REGISTERED IN THE STATES OF CONNECTICUT, ILLINOIS, INDIANA, MAINE, MARYLAND, MASSACHUSETTS, MICHIGAN, NEW HAMPSHIRE, NEW JERSEY, NEW YORK, OHIO, PENNSYLVANIA, RHODE ISLAND, VERMONT, OR WISCONSIN, AND THE DISTRICT OF COLUMBIA. THE FRONT DISC BRAKE ROTORS CAN EXPERIENCE SEVERE CORROSION IF OPERATED FOR AN EXTENSIVE PERIOD IN THE "SALT BELT." IF THE ROTORS ARE NOT REPLACED, THE CORROSION CAN EVENTUALLY COMPROMISE THE STRUCTURAL INTEGRITY OF THE STAMPED STEEL CENTER HUB SECTION OF THE ROTOR.
Consequence & remedy
Consequence: THE REDUCED STRENGTH CAN ALLOW THE CAST IRON WEAR SURFACE TO SEPARATE FROM THE HUB, REDUCING THE BRAKE EFFECTIVENESS OF THE VEHICLE.
Remedy: DEALERS WILL REPLACE THESE ROTORS WITH ROTORS THAT ARE COATED WITH A CORROSION PROTECTION.
96V260000 · Service Brakes, Hydraulic:antilock/traction Control/electronic Limited Slip
Dec 27, 1996
VEHICLE DESCRIPTION: VEHICLES EQUIPPED WITH ANTILOCK BRAKE SYSTEM (ABS). THE ANTILOCK BRAKE SYSTEM (ABS) HYDRAULIC CONTROL UNIT CAN EXPERIENCE EXCESSIVE BRAKE ACTUATOR PISTON SEAL WEAR WHICH COULD CAUSE PUMP-MOTOR DETERIORATION.
Consequence & remedy
Consequence: IF THIS OCCURS, THE ABS FUNCTION WOULD BE LOSE AND REDUCED POWER ASSIST WOULD BE EXPERIENCED DURING VEHICLE BRAKING. THE INSTRUMENT PANEL WARNING LIGHTS WILL SIGNAL SYSTEM IMPAIRMENT AND THE BASE MANUAL BRAKES WILL REMAIN FUNCTIONAL.
Remedy: DEALERS WILL TEST THE VEHICLE'S ABS AND REPAIR AS NECESSARY. THE WARRANTY ON ALL ABS COMPONENTS WILL BE EXTENDED TO 10 YEARS OR 100,000 MILES (EXCEPT FOR THE BRAKE ACTUATOR PISTON ASSEMBLY AND THE PUMP-MOTOR ASSEMBLY WHICH WILL HAVE A LIFETIME COVERAGE). OWNERS WILL BE REIMBURSED FOR PREVIOUS ABS COMPONENT REPAIR COSTS.
91V003000 · Service Brakes, Hydraulic:foundation Components:hoses, Lines/piping, And Fittings
Oct 2, 1991
THERE MAY BE HYDRAULIC FLUID CONTAMINATION FROM CONDENSATION FORMATION THAT CAN PLUG THE ABS BRAKE BOOSTER PUMP FILTER; STRESS CORROSION OF THE MASTER CYLINDER SNAP RING HAS BEEN TRACED TO CHLORINE LEAKING FROM THE LOW PRESSURE HYDRAULIC HOSE WHICH MAY CAUSE IT TO BREAK; FRONT BRAKE HOSE TO TIRE INTERFERENCE WHICH MAY CAUSE FAILURE OF THE BRAKE HOSE.
Consequence & remedy
Consequence: CONTAMINATION OF THE HYDRAULIC FLUID CAN CAUSEMALFUNCTIONING OF THE ANTI-LOCK BRAKE SYSTEM; LOW PRESSURE HOSE LEAKAGE CAUSESLOSS OF BRAKE FLUID AND ALSO RESULTS IN CORROSION AND FAILURE OF THE MASTERCYLINDER SNAP RING, RESULTING COMPLETE BRAKE FAILURE; FAILURE OF THE FRONT BRAKEHOSE DUE TO HOSE TO TIRE INTERFERENCE WILL CAUSE FAILURE OF ONE HALF OF THEBRAKE SYSTEM RESULTING IN A LONGER STOPPING DISTANCE THAN EXPECTED.
Remedy: REPLACE ABS LOW PRESSURE HOSE; REBUILD MASTER BRAKE CYLINDER; INSPECT, SERVICE INTERFERENCE PROBLEMS, AND REPLACE FRONT BRAKE HOSE AS NECESSARY.
91V063000 · Service Brakes, Hydraulic:foundation Components:hoses, Lines/piping, And Fittings
Apr 15, 1991
IMPROPER INSERTION/CRIMPING OF THE HOSE-TO-END FITTINGS OF THE HIGH PRESSURE HOSE ON THE ANTI-LOCK BRAKE SYSTEM CAN CAUSE DETACHMENT OF THE HOSE FROM THE ABS SYSTEM, AND DISCHARGE OF HYDRAULIC FLUID.
Consequence & remedy
Consequence: DETACHMENT OF THE HOSE FROM THE ABS SYSTEM CAUSES THELOSS OF THE ABS FUNCTION AND HYDRAULIC BRAKE ASSIST, LEAVING ONLY MANUAL BRAKESAND DECREASING STOPPING ABILITY, WHICH COULD RESULT IN AN ACCIDENT. DISCHARGE OFHYDRAULIC FLUID IN THE AREA OF THE HOT EXHAUST SYSTEM COULD RESULT IN AN ENGINECOMPARTMENT FIRE.
Remedy: REPLACE THE ABS HIGH PRESSURE HOSE.
90V177000 · Vehicle Speed Control:cruise Control
Oct 2, 1990
MALFUNCTION OF FUEL INJECTION SYSTEM THROTTLE POSTITION SENSOR COULD CAUSE INTERMITTENT HIGH ENGINE IDLE SPEED IMMEDIATELY AFTER STARTING ENGINE.
Consequence & remedy
Consequence: HIGH ENGINE IDLE WHEN CAR IS FIRST PLACED IN GEAR COULDRESULT IN UNEXPECTED ACCELERATION.
Remedy: REPLACE THROTTLE POSITION SENSORS WITH SENSORS THAT WOULD SEND CORRECT SIGNALS TO THE FUEL INJECTION SYSTEM.
Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗
NHTSA investigations
6EA97001 · Brake Disc/hub Separation
Opened Jan 13, 1997 · Closed Jan 9, 1998
Status: closed (inferred from source dates) · Service Brakes, Hydraulic
CONSUMER COMPLAINTS INDICATE THAT CORROSION OF THE BRAKE ROTORS HAVE CAUSED SEPARATION OF THE BRAKE DISC FROM ITS HUB, RESULTING IN BRAKE FAILURE.
PE96053 · Brake Disc/hub Separation
Opened Sep 5, 1996 · Closed Jan 13, 1997
Status: closed (inferred from source dates) · Service Brakes, Hydraulic
consumer complaints indicate that corrosion of hte brake rotors have caused separation of the brake disc from its hub, resulting in brake failure.
PE95049 · Rear Axle Shaft Separation
Opened Aug 17, 1995 · Closed Jan 26, 1996
Status: closed (inferred from source dates) · Suspension
THIS INVESTIGATION WAS OPENED TO EXAMINE THE FAILURE MODE AND THE RISK TO MOTOR VEHICLE SAFETY POSED BY ALLEGATIONS OF REAR AXLE SEPARATIONS.THE REAR AXLE SHAFT AND HOUSING DESIGN IS TYPICAL OF THOSE IN WHICH THE WEIGHT OF THE VEHICLE IS CARRIED ON THE AXLE HOUSING.THE LEFT AND RIGHT AXLE SHAFTS, SUPPORTED BY ROLLER BEARINGS, ARE SITUATED INSIDE THE AXLE HOUSING.THE INBOARD SPLINED END OF THE AXLE SHAFT RECEIVES POWER TRANSMITTED FROM THE DIFFERENTIAL ASSEMBLY, PROVIDING TORQUE TO THE REAR WHEELS.THE ALLEGATIONS ARE THAT THE AXLE SHAFT FAILS, RESULTING IN THE SEPARATION OF A WHEEL AND AXLE HUB ASSEMBLY OR THE ENTIRE AXLE SHAFT AND WHEEL ASSEMBLY, DEPENDING ON THE LOCATION OF THE AXLE SHAFT FAILURE.AS IDENTIFIED BY CHRYSLER, THE SUBJECT REAR AXLES ARE DANA 35C AND 35CM MODELS, WHICH HAVE BEEN USED ON THE SUBJECT VEHICLES SINCE THE 1990 MODEL YEAR.A SAFETY DEFECT TREND WITH RESPECT TO THE SUBJECT AXLE SHAFTS HAS NOT BEEN IDENTIFIED.SEE HARD COPY RESUME FOR FULL TEXT OF SUMMARY.
PE93057 · Driveshaft/univ.joint Fail
Opened Jun 14, 1993 · Closed Oct 29, 1993
Status: closed (inferred from source dates) · Power Train
There is no summary currently available
PE91067 · Steering Gear Lockup
Opened Apr 16, 1991 · Closed Jun 14, 1991
Status: closed (inferred from source dates) · Steering
There is no summary currently available
EA90024 · Failed Antilock Brakes
Opened Apr 26, 1990 · Closed Jan 14, 1991
Status: closed (inferred from source dates) · Service Brakes, Hydraulic
There is no summary currently available