IllustrationI KEEP GETTING NOTICES ABOUT THIS AIRBAG RECALL, BUT THIS VEHICLE WAS DONATED TO HUDSON HIGH SCHOOL AND BROKEN DOWN FOR PARTS. THIS VEHICLE HASN'T BEEN ON THE ROAD FOR OVER 3 YEARS. PLEASE TAKE THIS OFF THE RECALL LIST.
2003 Infiniti QX4
Owner reports · Recalls · Investigations
Similar to other model years
Owner complaints for the 2003 Infiniti QX4 do not stand out strongly from the model-year median of 29.
About this comparison →How this year compares
Owner complaints by model year
Compare all QX4 years →Counts vary with age, sales and reporting. They are not failure rates.
What owners reported most
All reported categories
Tap a category to read its complaints. One report may name several components.
When problems were reported
Mileage at the reported incident
Limited mileage data: 15 of 20 reports include usable mileage. There isn’t enough coverage to show a useful chart.
NHTSA’s mileage field refers to the reported incident, not necessarily the filing date. This shows report counts, not the likelihood of a failure.
What to inspect
Issues worth paying extra attention to based on owner reports.
- Suspension. Review the 8 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
- Structure. Review the 6 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
- Service Brakes, Hydraulic. Review the 3 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
NHTSA owner reports · September 18, 2026 snapshot.
2 crash reports0 fire reports1 injury reports
What owners actually said
20 reportsBOUGHT A USED CAR FROM A USED CAR DEALER WITH 1 PREVIOUS OWNER. IN 2011 A RECALL WAS SUPPOSEDLY DONE BY INDICATING "INSPECTED!" WHY WASN'T THE PARTS REPLACED?
2003 INFINITI QX4. CONSUMER WRITES IN REGARDS TO VEHICLE FRONT STRUT TOWER SEVERE RUSTS AND CRACKS RECALL ISSUES. *SMD *TR
THIS CONCERN IS INVOLVING THE R1109 RECALL ISSUED BY INFINITI. THE RECALL WAS PERFORMED SIX YEARS AGO, HOWEVER RUST, AND HOLES IN THE METAL ARE NOW VISIBLE. I WAS TOLD THAT BECAUSE THE RECALL WAS ALREADY PERFORMED, THERE WAS NOTHING THEY COULD DO TO ASSIST ME. THIS VEHICLE WILL SOON BE UNSAFE TO DRIVE.
THE CONTROL ARM IS COMPLETELY RUSTED AWAY AS THE PATHFINDERS THAT THEY RECALLED AND IS DOING EXACTLY AS THEY HAVE DONE...BUT THERE IS NO RECALL ON THE INFINITI I WAS WONDERING WHY THOSE AND NOT THE INFINITI AS WE LIVE IN MASSACHUSETTS AND THE SALT DOES THE SAME ON THIS CAR NOW WE HAVE THE DEATH WOMBLE ON THIS CAR
TL* THE CONTACT OWNS A 2003 INFINITI QX4. WHILE DRIVING OVER 45 MPH, THE FRONT END OF THE VEHICLE SHOOK AND VIBRATED. THE VEHICLE WAS TAKEN TO THE DEALER WHERE IT WAS DISCOVERED THAT THE ENGINE CRADLE WAS CRACKED DUE TO RUSTING AND CORROSION. THE MANUFACTURER WAS NOTIFIED OF THE FAILURE. THE FAILURE MILEAGE WAS 200,000.
FUEL FILLER NECK HAS CORRODED CAUSING GAS TO LEAK ON TO TIRE AND BRAKES WHILE FILLING GAS TANK. RECALL OF PREVIOUS MODEL. *JS
RUNNING BOARDS ARE COMPLETELY RUSTED, THEY WILL EITHER FALL OFF WHILE DRIVING AND COULD CAUSE AN ACCIDENT OR AN UNSUSPECTING PERSON COULD BE RELYING ON THEM TO ENTER THE SUV AND HURT THEM SELVES. THE SUV WAS WELL TAKEN CARE OF, 1 OWNER, AND THE FRAME RAILS AND CHASSIS ARE CONSIDERABLY RUST FREE. HOW COME THESE ARE IN SUCH BAD CO…
Read full complaint
RUNNING BOARDS ARE COMPLETELY RUSTED, THEY WILL EITHER FALL OFF WHILE DRIVING AND COULD CAUSE AN ACCIDENT OR AN UNSUSPECTING PERSON COULD BE RELYING ON THEM TO ENTER THE SUV AND HURT THEM SELVES. THE SUV WAS WELL TAKEN CARE OF, 1 OWNER, AND THE FRAME RAILS AND CHASSIS ARE CONSIDERABLY RUST FREE. HOW COME THESE ARE IN SUCH BAD CONDITION? WHY DON'T INFINITI HAVE REPLACEMENTS FOR THEM ALONE AND NOT THE WHOLE RUNNING BOARD FOR OVER $1300 PER SIDE! THAT'S INSANE AND NO ONE IS GOING TO PAY THAT FOR A 11+ YEAR OLD SUV! *TR
2003 INFINITY QX4. ATTORNEY WRITES ON BEHALF OF THE CONSUMER IN REGARDS TO THE FRONT DRIVER'S SIDE STRUT TOWER HOUSING UNIT *TGW THE LAWYER STATED HIS CLIENT'S VEHICLE WAS SEIZED BY INFINITI AND THEY OFFERED TO BUY THE VEHICLE BACK. HIS CLIENT NEVER RECEIVED A RECALL LETTER AND WAS ONLY MADE AWARE OF THE PROBLEM WHEN HE TOOK TH…
Read full complaint
2003 INFINITY QX4. ATTORNEY WRITES ON BEHALF OF THE CONSUMER IN REGARDS TO THE FRONT DRIVER'S SIDE STRUT TOWER HOUSING UNIT *TGW THE LAWYER STATED HIS CLIENT'S VEHICLE WAS SEIZED BY INFINITI AND THEY OFFERED TO BUY THE VEHICLE BACK. HIS CLIENT NEVER RECEIVED A RECALL LETTER AND WAS ONLY MADE AWARE OF THE PROBLEM WHEN HE TOOK THE VEHICLE IN FOR SERVICING. RECALL# 11V244000. *JB UPDATED 08/09/12
PASSENGER SIDE STRUT TOWER COMPLETELY RUSTED OUT, THE DEALERSHIP DEEMED THE VEHICLE UNSAFE TO OPERATE. HOWEVER, THE CURRENT RECALL DOES NOT COVER THE PASSENGER SIDE, ONLY THE DRIVERS SIDE AND IT'S MY RESPONSIBILITY TO COVER THE COST OF THE REPLACEMENT. *KB
Official recalls
320V008000 · Air Bags:frontal:passenger Side:inflator Module
Jan 9, 2020
Nissan North America, Inc. (Nissan) is recalling certain 2001-2003 Maxima, 2002-2006 Sentra, 2002-2004 Pathfinder, 2007-2011 Versa Sedan and Versa Hatchback, 2001-2004 Infiniti I30 and I35, 2002-2003 Inifiniti QX4, 2003-2008 Infiniti FX35 and FX45 and 2006-2010 M35 and M45 vehicles. The vehicles are equipped with non-desiccated, frontal passenger air bag inflators containing phase stabilized ammonium nitrate (PSAN) propellant that were used as interim remedy parts for previous Takata recalls. These inflators may explode due to propellant degradation occurring after long-term exposure to high absolute humidity, high temperatures, and high temperature cycling.
Consequence & remedy
Consequence: An inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.
Remedy: Nissan will notify owners, and dealers will replace the front passenger air bag inflators with alternate desiccated inflators, free of charge. The recall began February 12, 2020. Owners may contact Nissan customer service at 888-737-9511 or Infiniti customer service at 888-810-3715.
15V287000 · Air Bags
May 15, 2015
Nissan North America, Inc. (Nissan) is recalling certain model year 2001-2003 Nissan Maxima, 2002-2004 Pathfinder, 2002-2006 Sentra, 2002-2003 Infiniti QX4 and I35, 2003 FX35 and FX45, and 2001 I30 vehicles. Upon deployment of the passenger side frontal air bag, excessive internal pressure may cause the inflator to rupture.
Consequence & remedy
Consequence: In the event of a crash necessitating deployment of the passenger's frontal air bag, the inflator could rupture with metal fragments striking the vehicle occupants potentially resulting in serious injury or death.
Remedy: Nissan will notify owners, and dealers will replace the passenger air bag inflator, free of charge. The recall began on June 15, 2015. Owners may contact Nissan customer service at 1-800-647-7261. Note: On December 18, 2015 Nissan informed NHTSA of an amendment of this recall to remove 2004-2005 Infiniti FX35 and FX45 vehicles.
11V244000 · Steering:column; Suspension:front
Apr 20, 2011
NISSAN IS RECALLING CERTAIN MODEL YEAR 1996-2004 PATHFINDER AND MODEL YEAR 1997-2003 INFINITI QX4 VEHICLES ORIGINALLY SOLD, OR CURRENTLY REGISTERED IN, CONNECTICUT, DELAWARE, IOWA, ILLINOIS, INDIANA, MASSACHUSETTS, MAINE, MARYLAND, MICHIGAN, MINNESOTA, MISSOURI, NEW HAMPSHIRE, NEW JERSEY, NEW YORK, OHIO, PENNSYLVANIA, RHODE ISLAND, VERMONT, WASHINGTON D.C., WEST VIRGINIA AND WISCONSIN. IN AREAS OF THE COUNTRY IN WHICH HEAVY CONCENTRATIONS OF ROAD SALT ARE USED, A MIXTURE OF SNOW/WATER AND SALT MAY ENTER AN ASSEMBLY LOCATION HOLE IN THE UPPER STRUT HOUSING, CAUSING WATER TO COLLECT AT THE MATING SURFACE OF THE STRUT HOUSING PANEL AND THE INNER HOOD LEDGE ASSEMBLY. OVER TIME, THIS SNOW/WATER AND SALT INTRUSION MAY RESULT IN CORROSION OF THE STRUT TOWER HOUSING IN SOME SUBJECT VEHICLES.
Consequence & remedy
Consequence: THE STRUT HOUSING MAY CRACK AND PULL AWAY FROM THE INNER HOOD LEDGE ASSEMBLY. THIS MAY LEAD TO GRINDING NOISES, INCREASED STEERING EFFORT, AND POSSIBLY THE STEERING COLUMN TO BREAK, RESULTING IN THE LOSS OF STEERING CONTROL, WHICH COULD RESULT IN A CRASH.
Remedy: NISSAN WILL INSPECT THE STRUT HOUSING AND REPAIR THE VEHICLES AS NECESSARY, FREE OF CHARGE. AN INTERIM NOTIFICATION LETTER WAS SENT OUT IN MAY 2011. THE SECOND NOTICE WAS MAILED ON JULY 25, 2011. OWNERS MAY CONTACT NISSAN AT 1-800-647-7261.
Additional source detail variants (2)
Suspension:front
NISSAN IS RECALLING CERTAIN MODEL YEAR 1996-2004 PATHFINDER AND MODEL YEAR 1997-2003 INFINITI QX4 VEHICLES ORIGINALLY SOLD, OR CURRENTLY REGISTERED IN, CONNECTICUT, DELAWARE, IOWA, ILLINOIS, INDIANA, MASSACHUSETTS, MAINE, MARYLAND, MICHIGAN, MINNESOTA, MISSOURI, NEW HAMPSHIRE, NEW JERSEY, NEW YORK, OHIO, PENNSYLVANIA, RHODE ISLAND, VERMONT, WASHINGTON D.C., WEST VIRGINIA AND WISCONSIN. IN AREAS OF THE COUNTRY IN WHICH HEAVY CONCENTRATIONS OF ROAD SALT ARE USED, A MIXTURE OF SNOW/WATER AND SALT MAY ENTER AN ASSEMBLY LOCATION HOLE IN THE UPPER STRUT HOUSING, CAUSING WATER TO COLLECT AT THE MATING SURFACE OF THE STRUT HOUSING PANEL AND THE INNER HOOD LEDGE ASSEMBLY. OVER TIME, THIS SNOW/WATER AND SALT INTRUSION MAY RESULT IN CORROSION OF THE STRUT TOWER HOUSING IN SOME SUBJECT VEHICLES.
Consequence: THE STRUT HOUSING MAY CRACK AND PULL AWAY FROM THE INNER HOOD LEDGE ASSEMBLY. THIS MAY LEAD TO GRINDING NOISES, INCREASED STEERING EFFORT, AND POSSIBLY THE STEERING COLUMN TO BREAK, RESULTING IN THE LOSS OF STEERING CONTROL, WHICH COULD RESULT IN A CRASH.
Remedy: NISSAN WILL INSPECT THE STRUT HOUSING AND REPAIR THE VEHICLES AS NECESSARY, FREE OF CHARGE. AN INTERIM NOTIFICATION LETTER WAS SENT OUT IN MAY 2011. THE SECOND NOTICE WAS MAILED ON JULY 25, 2011. OWNERS MAY CONTACT NISSAN AT 1-800-647-7261.
Steering:column
NISSAN IS RECALLING CERTAIN MODEL YEAR 1996-2004 PATHFINDER AND MODEL YEAR 1997-2003 INFINITI QX4 VEHICLES ORIGINALLY SOLD, OR CURRENTLY REGISTERED IN, CONNECTICUT, DELAWARE, IOWA, ILLINOIS, INDIANA, MASSACHUSETTS, MAINE, MARYLAND, MICHIGAN, MINNESOTA, MISSOURI, NEW HAMPSHIRE, NEW JERSEY, NEW YORK, OHIO, PENNSYLVANIA, RHODE ISLAND, VERMONT, WASHINGTON D.C., WEST VIRGINIA AND WISCONSIN. IN AREAS OF THE COUNTRY IN WHICH HEAVY CONCENTRATIONS OF ROAD SALT ARE USED, A MIXTURE OF SNOW/WATER AND SALT MAY ENTER AN ASSEMBLY LOCATION HOLE IN THE UPPER STRUT HOUSING, CAUSING WATER TO COLLECT AT THE MATING SURFACE OF THE STRUT HOUSING PANEL AND THE INNER HOOD LEDGE ASSEMBLY. OVER TIME, THIS SNOW/WATER AND SALT INTRUSION MAY RESULT IN CORROSION OF THE STRUT TOWER HOUSING IN SOME SUBJECT VEHICLES.
Consequence: THE STRUT HOUSING MAY CRACK AND PULL AWAY FROM THE INNER HOOD LEDGE ASSEMBLY. THIS MAY LEAD TO GRINDING NOISES, INCREASED STEERING EFFORT, AND POSSIBLY THE STEERING COLUMN TO BREAK, RESULTING IN THE LOSS OF STEERING CONTROL, WHICH COULD RESULT IN A CRASH.
Remedy: NISSAN WILL INSPECT THE STRUT HOUSING AND REPAIR THE VEHICLES AS NECESSARY, FREE OF CHARGE. AN INTERIM NOTIFICATION LETTER WAS SENT OUT IN MAY 2011. THE SECOND NOTICE WAS MAILED ON JULY 25, 2011. OWNERS MAY CONTACT NISSAN AT 1-800-647-7261.
Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗
NHTSA investigations
2EA21002 · Desiccated Air Bag Inflator Rupture
Opened Sep 17, 2021 · No close date supplied
Status: open (inferred from source dates) · Air Bags:frontal:driver Side:inflator Module; Air Bags:frontal:passenger Side:inflator Module
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.
Additional source detail variants (2)
Air Bags:frontal:driver Side:inflator Module
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.
Air Bags:frontal:passenger Side:inflator Module
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.
PE11004 · Frame/body Structure Corrosion
Opened Jan 28, 2011 · Closed Jun 30, 2011
Status: closed (inferred from source dates) · Steering; Steering:column; Suspension; Suspension:front; Suspension:front:macpherson Strut; Suspension:front:shock Absorber
In their Defect Information Report (DIR) of April 20, 2011, Nissan North America, Inc. (Nissan) notified NHTSA that it would conduct a safety recall of certain 1996-2004 Nissan Pathfinder and 1997-2003 Infinity QX4 vehicles to repair corrosion damage to the driver's side front strut tower.The vehicles included in the recall are those that were originally sold, or are currently registered in salt belt states including Connecticut, Delaware, Iowa, Illinois, Indiana, Massachusetts, Maine, Maryland, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, West Virginia, Wisconsin, and the District of Columbia.The DIR states in part, ...the strut housing may crack and pull away from the inner hood ledge assembly.This could lead to the strut housing panel separating and contacting the steering column lower shaft.Contact with the steering column lower shaft can cause steering difficulties and may require an increase in steering effort by the driver.If the steering column lower shaft completely fractured it would result in a total loss of steering control.In some cases, the strut housing panel can contact or affect adjacent brake system components.Complainants reported experiencing either steering or brake system issues, and in some cases, both.Nissan dealer's will inspect the strut housing and, based on the level of corrosion found, make an assessment as to how to remedy the vehicle (see defect information report for additional details). Brake system components adjacent to, and in the area of, the strut tower (i.e., brake master cylinder, left front brake line, ABS wire harness, etc.) will also be inspected.
Additional source detail variants (6)
Steering:column
In their Defect Information Report (DIR) of April 20, 2011, Nissan North America, Inc. (Nissan) notified NHTSA that it would conduct a safety recall of certain 1996-2004 Nissan Pathfinder and 1997-2003 Infinity QX4 vehicles to repair corrosion damage to the driver's side front strut tower.The vehicles included in the recall are those that were originally sold, or are currently registered in salt belt states including Connecticut, Delaware, Iowa, Illinois, Indiana, Massachusetts, Maine, Maryland, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, West Virginia, Wisconsin, and the District of Columbia.The DIR states in part, ...the strut housing may crack and pull away from the inner hood ledge assembly.This could lead to the strut housing panel separating and contacting the steering column lower shaft.Contact with the steering column lower shaft can cause steering difficulties and may require an increase in steering effort by the driver.If the steering column lower shaft completely fractured it would result in a total loss of steering control.In some cases, the strut housing panel can contact or affect adjacent brake system components.Complainants reported experiencing either steering or brake system issues, and in some cases, both.Nissan dealer's will inspect the strut housing and, based on the level of corrosion found, make an assessment as to how to remedy the vehicle (see defect information report for additional details). Brake system components adjacent to, and in the area of, the strut tower (i.e., brake master cylinder, left front brake line, ABS wire harness, etc.) will also be inspected.
Steering
In their Defect Information Report (DIR) of April 20, 2011, Nissan North America, Inc. (Nissan) notified NHTSA that it would conduct a safety recall of certain 1996-2004 Nissan Pathfinder and 1997-2003 Infinity QX4 vehicles to repair corrosion damage to the driver's side front strut tower.The vehicles included in the recall are those that were originally sold, or are currently registered in salt belt states including Connecticut, Delaware, Iowa, Illinois, Indiana, Massachusetts, Maine, Maryland, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, West Virginia, Wisconsin, and the District of Columbia.The DIR states in part, ...the strut housing may crack and pull away from the inner hood ledge assembly.This could lead to the strut housing panel separating and contacting the steering column lower shaft.Contact with the steering column lower shaft can cause steering difficulties and may require an increase in steering effort by the driver.If the steering column lower shaft completely fractured it would result in a total loss of steering control.In some cases, the strut housing panel can contact or affect adjacent brake system components.Complainants reported experiencing either steering or brake system issues, and in some cases, both.Nissan dealer's will inspect the strut housing and, based on the level of corrosion found, make an assessment as to how to remedy the vehicle (see defect information report for additional details). Brake system components adjacent to, and in the area of, the strut tower (i.e., brake master cylinder, left front brake line, ABS wire harness, etc.) will also be inspected.
Suspension:front:macpherson Strut
In their Defect Information Report (DIR) of April 20, 2011, Nissan North America, Inc. (Nissan) notified NHTSA that it would conduct a safety recall of certain 1996-2004 Nissan Pathfinder and 1997-2003 Infinity QX4 vehicles to repair corrosion damage to the driver's side front strut tower.The vehicles included in the recall are those that were originally sold, or are currently registered in salt belt states including Connecticut, Delaware, Iowa, Illinois, Indiana, Massachusetts, Maine, Maryland, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, West Virginia, Wisconsin, and the District of Columbia.The DIR states in part, ...the strut housing may crack and pull away from the inner hood ledge assembly.This could lead to the strut housing panel separating and contacting the steering column lower shaft.Contact with the steering column lower shaft can cause steering difficulties and may require an increase in steering effort by the driver.If the steering column lower shaft completely fractured it would result in a total loss of steering control.In some cases, the strut housing panel can contact or affect adjacent brake system components.Complainants reported experiencing either steering or brake system issues, and in some cases, both.Nissan dealer's will inspect the strut housing and, based on the level of corrosion found, make an assessment as to how to remedy the vehicle (see defect information report for additional details). Brake system components adjacent to, and in the area of, the strut tower (i.e., brake master cylinder, left front brake line, ABS wire harness, etc.) will also be inspected.
Suspension:front
In their Defect Information Report (DIR) of April 20, 2011, Nissan North America, Inc. (Nissan) notified NHTSA that it would conduct a safety recall of certain 1996-2004 Nissan Pathfinder and 1997-2003 Infinity QX4 vehicles to repair corrosion damage to the driver's side front strut tower.The vehicles included in the recall are those that were originally sold, or are currently registered in salt belt states including Connecticut, Delaware, Iowa, Illinois, Indiana, Massachusetts, Maine, Maryland, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, West Virginia, Wisconsin, and the District of Columbia.The DIR states in part, ...the strut housing may crack and pull away from the inner hood ledge assembly.This could lead to the strut housing panel separating and contacting the steering column lower shaft.Contact with the steering column lower shaft can cause steering difficulties and may require an increase in steering effort by the driver.If the steering column lower shaft completely fractured it would result in a total loss of steering control.In some cases, the strut housing panel can contact or affect adjacent brake system components.Complainants reported experiencing either steering or brake system issues, and in some cases, both.Nissan dealer's will inspect the strut housing and, based on the level of corrosion found, make an assessment as to how to remedy the vehicle (see defect information report for additional details). Brake system components adjacent to, and in the area of, the strut tower (i.e., brake master cylinder, left front brake line, ABS wire harness, etc.) will also be inspected.
Suspension:front:shock Absorber
In their Defect Information Report (DIR) of April 20, 2011, Nissan North America, Inc. (Nissan) notified NHTSA that it would conduct a safety recall of certain 1996-2004 Nissan Pathfinder and 1997-2003 Infinity QX4 vehicles to repair corrosion damage to the driver's side front strut tower.The vehicles included in the recall are those that were originally sold, or are currently registered in salt belt states including Connecticut, Delaware, Iowa, Illinois, Indiana, Massachusetts, Maine, Maryland, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, West Virginia, Wisconsin, and the District of Columbia.The DIR states in part, ...the strut housing may crack and pull away from the inner hood ledge assembly.This could lead to the strut housing panel separating and contacting the steering column lower shaft.Contact with the steering column lower shaft can cause steering difficulties and may require an increase in steering effort by the driver.If the steering column lower shaft completely fractured it would result in a total loss of steering control.In some cases, the strut housing panel can contact or affect adjacent brake system components.Complainants reported experiencing either steering or brake system issues, and in some cases, both.Nissan dealer's will inspect the strut housing and, based on the level of corrosion found, make an assessment as to how to remedy the vehicle (see defect information report for additional details). Brake system components adjacent to, and in the area of, the strut tower (i.e., brake master cylinder, left front brake line, ABS wire harness, etc.) will also be inspected.
Suspension
In their Defect Information Report (DIR) of April 20, 2011, Nissan North America, Inc. (Nissan) notified NHTSA that it would conduct a safety recall of certain 1996-2004 Nissan Pathfinder and 1997-2003 Infinity QX4 vehicles to repair corrosion damage to the driver's side front strut tower.The vehicles included in the recall are those that were originally sold, or are currently registered in salt belt states including Connecticut, Delaware, Iowa, Illinois, Indiana, Massachusetts, Maine, Maryland, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, West Virginia, Wisconsin, and the District of Columbia.The DIR states in part, ...the strut housing may crack and pull away from the inner hood ledge assembly.This could lead to the strut housing panel separating and contacting the steering column lower shaft.Contact with the steering column lower shaft can cause steering difficulties and may require an increase in steering effort by the driver.If the steering column lower shaft completely fractured it would result in a total loss of steering control.In some cases, the strut housing panel can contact or affect adjacent brake system components.Complainants reported experiencing either steering or brake system issues, and in some cases, both.Nissan dealer's will inspect the strut housing and, based on the level of corrosion found, make an assessment as to how to remedy the vehicle (see defect information report for additional details). Brake system components adjacent to, and in the area of, the strut tower (i.e., brake master cylinder, left front brake line, ABS wire harness, etc.) will also be inspected.