NHTSA owner reports · September 18, 2026 snapshot.
What owners actually said
1,313 reportsMileage unknown · Nov 3, 2025
Steering
The contact owns a 2013 Hyundai Elantra. The contact stated that the steering wheel made clicking sound while turning to the left or the right. While driving at speeds of 55 MPH or higher, the steering wheel vibrated abnormally. There were no warning lights illuminated. The vehicle was not taken to be diagnosed or repaired. The …
Read full complaint
The contact owns a 2013 Hyundai Elantra. The contact stated that the steering wheel made clicking sound while turning to the left or the right. While driving at speeds of 55 MPH or higher, the steering wheel vibrated abnormally. There were no warning lights illuminated. The vehicle was not taken to be diagnosed or repaired. The contact was referred to the NHTSA Hotline by a mechanic to report the failure. The manufacturer was not made aware of the failure. The failure mileage was unknown.
NHTSA ODI #11697254
51,000 miles · Oct 27, 2025
Steering
The contact owns a 2013 Hyundai Elantra. The contact stated that there was a lot of play in the steering wheel, and the steering wheel moved back and forth with no resistance while the vehicle was being driven or while idling. There was a loud clunking noise coming from the steering column while turning the steering wheel to the…
Read full complaint
The contact owns a 2013 Hyundai Elantra. The contact stated that there was a lot of play in the steering wheel, and the steering wheel moved back and forth with no resistance while the vehicle was being driven or while idling. There was a loud clunking noise coming from the steering column while turning the steering wheel to the left or the right. The vehicle was taken to a certified mechanic, who diagnosed that the steering column flexible coupler had failed and caused the wheels to not respond correctly while turning the steering wheel. The contact was informed that the steering column flexible coupler needed to be replaced. The vehicle was not repaired. The manufacturer was not notified of the failure. The failure mileage was approximately 51,000.
NHTSA ODI #11695819
Mileage unknown · Oct 12, 2025
Air Bags
Description of the Issue: The airbag (SRS) warning light on my 2013 Hyundai Elantra GT Hatchback intermittently turns on and off and flickers when turning the steering wheel, indicating a potential fault in the spiral cable assembly (clock spring). Hyundai issued a Clock Spring Extended Warranty (TSB #17-BE-004-1) for certain ve…
Read full complaint
Description of the Issue: The airbag (SRS) warning light on my 2013 Hyundai Elantra GT Hatchback intermittently turns on and off and flickers when turning the steering wheel, indicating a potential fault in the spiral cable assembly (clock spring). Hyundai issued a Clock Spring Extended Warranty (TSB #17-BE-004-1) for certain vehicles, but my vehicle is not covered. A complete failure of the clock spring may prevent the driver’s airbag from deploying in a crash, creating a serious safety risk. The airbag warning light first appeared on [XXX]. The issue occurs during normal driving, particularly when turning the steering wheel. Safety Concern: If the clock spring fails completely, the driver’s airbag may not deploy during a collision, significantly increasing the risk of injury or death. Requested Action: I request that NHTSA investigate the intermittent airbag warning light issue in 2013 Hyundai Elantra GT vehicles, focusing on potential clock spring failures, and consider a safety recall or other remedy to ensure that driver airbags deploy reliably. Additional Information: The vehicle is currently located in Ottawa, ON, Canada. Photos of the dashboard with the airbag light illuminated can be provided if requested. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
NHTSA ODI #11692937
Mileage unknown · Sep 25, 2025
Steering
My steering wheel has been shaking and having a clunking sound when I accelerate over 60 miles, go over any bumps, and turn. I had my mechanic diagnose it and I was told the steering coupler was bad. I did some research to see if it was a recall and it wasn't. Then I saw on Hyundai.com then I could check my VIN and verify if my …
Read full complaint
My steering wheel has been shaking and having a clunking sound when I accelerate over 60 miles, go over any bumps, and turn. I had my mechanic diagnose it and I was told the steering coupler was bad. I did some research to see if it was a recall and it wasn't. Then I saw on Hyundai.com then I could check my VIN and verify if my vehicle qualified for the extended warranty for this issue. My vehicle qualified however after contacting customer service directly to verify, they advise me my vehicle did not qualify because of being over 100,000 miles. Prior to contacting them I saw that they had a statement saying that this issue was not safety related. I didn't believe that to be correct because my mechanic told me otherwise, and information I saw regarding Google searches said the opposite. Also, my own experience whenever that shaking of my steering wheel occurs I literally have to use both of my hands to control it. Therefore I believe it is a safety issue that absolutely needs to be revisited as being such. I was advised on that call to take it to the dealership and have them diagnose it and advise headquarters directly however I made it clear that I did not want to have to incur a diagnostic fee when the initial diagnostic I had was free and I have the estimate breakdown from my mechanic. And I did not believe that there should be any diagnostic fee for a safety concern. I did advise them that I was going to contact NHTSA and advised them of this circumstance in order for it to be reviewed.
NHTSA ODI #11689688
Mileage unknown · Sep 24, 2025
Electrical SystemFire
During the incident, there was an aggressive flow of smoke coming from behind the steering wheel within the dashboard indicating overheating and/or a fire. My vehicle was inspected by my local dealer, Ed Voyles Hyundai, who stated that their inspection found a burning left rear tail light assembly with fluid inside of it. No war…
Read full complaint
During the incident, there was an aggressive flow of smoke coming from behind the steering wheel within the dashboard indicating overheating and/or a fire. My vehicle was inspected by my local dealer, Ed Voyles Hyundai, who stated that their inspection found a burning left rear tail light assembly with fluid inside of it. No warning lamps or prompts appeared during the incident.
NHTSA ODI #11689554
Mileage unknown · Sep 16, 2025
Steering
In the last month I started to hear a clicking sound when turning my steering wheel in either direction. I am told that this is a frequent problem with Hyundai Elantra and is caused by a flexible coupling breaking. I brought my Elantra to the dealer to take cre of some other recalls but was told that the coupling problem is not …
Read full complaint
In the last month I started to hear a clicking sound when turning my steering wheel in either direction. I am told that this is a frequent problem with Hyundai Elantra and is caused by a flexible coupling breaking. I brought my Elantra to the dealer to take cre of some other recalls but was told that the coupling problem is not a recall issue. I do have a Technical Service Bulletin from Hyundai on this issue and feel that since it happens frequently on the Elantra, it should be covered by the dealer or Hyundai corporate. Please advise as I cannot afford to pay for this repair as I am on disabilty with limited income.
NHTSA ODI #11687638
Mileage unknown · Sep 12, 2025
Structure
I am reporting a significant paint delamination issue on my 2013 Hyundai Elantra in Sparkling White. The paint has been peeling, bubbling, and chipping particularly on the roof, trunk, and hood, exposing the primer and bare metal underneath. This is not due to wear, environmental exposure, or physical damage. It appears to be a …
Read full complaint
I am reporting a significant paint delamination issue on my 2013 Hyundai Elantra in Sparkling White. The paint has been peeling, bubbling, and chipping particularly on the roof, trunk, and hood, exposing the primer and bare metal underneath. This is not due to wear, environmental exposure, or physical damage. It appears to be a factory defect related to improper paint or primer application. This issue is widespread among Hyundai owners of the same year and color, and several technical service bulletins have already been issued for similar paint problems (such as TSB 19-BD-005H). However, Hyundai has refused to repair my vehicle, citing the expired warranty, despite clear evidence of a manufacturing defect. The exposed metal poses a rust and corrosion risk, which could compromise vehicle safety and structural integrity over time. I believe this should be investigated as a potential quality and safety concern and request the NHTSA to look into this recurring defect.
NHTSA ODI #11686929
Mileage unknown · Sep 2, 2025
EngineFire
On August 9, 2025, my 2013 Hyundai Elantra suffered catastrophic engine failure while driving. The engine seized, creating immediate danger on the road. This vehicle is under NHTSA Recall 23V651000 (Hyundai Recall 251), which warns of fire/engine compartment risks both while parked and driving. Hyundai denied my claim, citing …
Read full complaint
On August 9, 2025, my 2013 Hyundai Elantra suffered catastrophic engine failure while driving. The engine seized, creating immediate danger on the road. This vehicle is under NHTSA Recall 23V651000 (Hyundai Recall 251), which warns of fire/engine compartment risks both while parked and driving. Hyundai denied my claim, citing a vendor report that found “no thermal damage” to the ABS wiring. However, the dealer’s inspection confirmed internal engine failure with thermal damage, and I directly witnessed flames. The recall does not require ABS wiring itself to burn , it covers the broader safety hazard of fire and failure, which is exactly what occurred. In addition, Hyundai tried to shift blame onto owner maintenance. Their own recall language acknowledges failures occur due to the defect, not neglect. Furthermore, the handling by Hyundai’s case managers was unacceptable: my case was transferred without notice, calls were ignored, and I was left without clear instructions or remedy while my vehicle was disabled. I have attached the denial letter, the dealer report, the recall notice, and proof of maintenance. I request NHTSA review Hyundai’s mishandling of this recall obligation and require them to provide remedy and compensation
NHTSA ODI #11684638
Mileage unknown · Aug 28, 2025
Engine
My 2013 Hyundai Elantra with the 1.8L Nu engine suffered catastrophic engine failure. A mechanic found metal shavings in the oil and diagnosed a failed connecting rod bearing. The Hyundai dealership quoted $10,000 for a new engine and refused warranty coverage because I am over 120,000 miles, even though this is a well-documente…
Read full complaint
My 2013 Hyundai Elantra with the 1.8L Nu engine suffered catastrophic engine failure. A mechanic found metal shavings in the oil and diagnosed a failed connecting rod bearing. The Hyundai dealership quoted $10,000 for a new engine and refused warranty coverage because I am over 120,000 miles, even though this is a well-documented defect. Hyundai issued TSB 22-EM-007H covering rod bearing wear in this engine, and there have been class actions and warranty extensions for similar failures. This failure creates a safety hazard, as the engine can seize or stall suddenly while driving, increasing risk of an accident. I request NHTSA investigate this known defect in the 1.8L Nu engine, as it poses a safety risk to myself and others.
NHTSA ODI #11683682
Mileage unknown · Aug 25, 2025
Service Brakes
Under carriage steel brake line rust through at support bracket and causing a loss of brake fluid and risk of stopping condition that raise a concern of an accident and protentional risk of injury to the owner/operator and other drivers on the road. This rust condition and due to road salt condition in state that use road salt…
Read full complaint
Under carriage steel brake line rust through at support bracket and causing a loss of brake fluid and risk of stopping condition that raise a concern of an accident and protentional risk of injury to the owner/operator and other drivers on the road. This rust condition and due to road salt condition in state that use road salt and Hyundai clearly lacks undercoating protection. This issue has been seen by other 2013 Hyundai Elantra GT owner and been clearly documented in Hyundai discussion forums. The brake light did come on and I drive it to the first repair shop to fix the issue by replacing the rusted brake line. The repair shop noted the lack of manufactures undercoating of this product cause numerous rusting concern on the under carriage of this vehicle include steel brake line, steel Fuel line and steel Evp emission lines along with safety concern associated with each issue
NHTSA ODI #11682966
Official recalls
4Sep 22, 2023
Hyundai Motor America (Hyundai) is recalling certain 2011-2015 Elantra, Genesis Coupe, Sonata Hybrid, 2012-2015 Accent, Azera, Veloster, 2013-2015 Elantra Coupe, Santa Fe, 2014-2015 Equus, 2010-2012 Veracruz, 2010-2013 Tucson, 2015 Tucson Fuel Cell, and 2013 Santa Fe Sport vehicles. The Anti-Lock Brake System (ABS) module may leak brake fluid internally and cause an electrical short, which can result in an engine compartment fire while parked or driving.
Consequence & remedy
Consequence: An engine compartment fire while parked or driving can increase the risk of injury.
Remedy: Owners are advised to park outside and away from structures until the recall repair is complete. Dealers will replace the ABS fuse, free of charge. Owner notification letters were mailed April 10, 2024 through October 11, 2024. Owners may contact Hyundai customer service at 1-855-371-9460. Hyundai's number for this recall is 251.
Nov 30, 2017
Hyundai Motor Company (Hyundai) is recalling certain 2013-2014 Elantra sedan, coupe and GT vehicles. The brake pedal stopper pad can deteriorate allowing the brake light switch plunger to remain extended when the brake pedal is released. This will allow the brake lights to remain illuminated continuously. It can also allow the shift lever to be moved without depressing the brake pedal, or activate the engine management brake pedal override feature.
Consequence & remedy
Consequence: If the brake light switch plunger does not retract as it should when the brake pedal is not being pressed, the brake lights may stay illuminated preventing accurate communication to following vehicles that the vehicle is slowing or stopping. Additionally, if the brake switch plunger is not retracted, then the transmission can be shifted out of PARK without depressing the brake pedal. Either condition increases the risk of a crash.
Remedy: Hyundai will notify owners, and dealers will replace the brake pedal stopper pad, free of charge. The recall is expected to begin February 8, 2018. Owners may contact Hyundai customer service at 1-800-633-5151. Hyundai's number for this recall is 170. This campaign expands recall 16V574.
Aug 2, 2016
Hyundai Motor America (Hyundai) is recalling certain model 2013 Elantra vehicles manufactured December 1, 2012, to April 30, 2013. The brake pedal stopper pad can deteriorate allowing the brake light switch plunger to remain extended when the brake pedal is released.
Consequence & remedy
Consequence: If the brake light switch plunger does not retract as it should when the brake pedal is not being pressed, the brake lights may stay illuminated preventing accurate communication to following vehicles that the vehicle is slowing or stopping. Additionally, if the brake switch plunger is not retracted, then the transmission can be shifted out of PARK without depressing the brake pedal. Either condition increases the risk of a crash.
Remedy: Hyundai will notify owners, and dealers will replace the brake pedal stopper pad with an improved part, free of charge. The recall is expected to begin on September 30, 2016. Owners may contact Hyundai customer service at 1-855-371-9460. Hyundai's number for this recall is 146.
Apr 1, 2013
Hyundai Motor Company is recalling certain model year 2011-2013 Elantra vehicles manufactured from November 12, 2010, through March 5, 2013. A support bracket attached to the headliner may become displaced during a side curtain airbag deployment.
Consequence & remedy
Consequence: If the headliner support bracket makes contact with an occupant during a crash, it may cause a laceration injury.
Remedy: Hyundai will notify owners, and dealers will apply adhesive strips to the headliner, free of charge. The safety recall began during April 2013. Owners may contact Hyundai at 1-800-633-5151. Hyundai's recall campaign number is 109.
Additional source detail variants (2)
Structure
Hyundai Motor Company is recalling certain model year 2011-2013 Elantra vehicles manufactured from November 12, 2010, through March 5, 2013. A support bracket attached to the headliner may become displaced during a side curtain airbag deployment.
Consequence: If the headliner support bracket makes contact with an occupant during a crash, it may cause a laceration injury.
Remedy: Hyundai will notify owners, and dealers will apply adhesive strips to the headliner, free of charge. The safety recall began during April 2013. Owners may contact Hyundai at 1-800-633-5151. Hyundai's recall campaign number is 109.
Air Bags:side/window
Hyundai Motor Company is recalling certain model year 2011-2013 Elantra vehicles manufactured from November 12, 2010, through March 5, 2013. A support bracket attached to the headliner may become displaced during a side curtain airbag deployment.
Consequence: If the headliner support bracket makes contact with an occupant during a crash, it may cause a laceration injury.
Remedy: Hyundai will notify owners, and dealers will apply adhesive strips to the headliner, free of charge. The safety recall began during April 2013. Owners may contact Hyundai at 1-800-633-5151. Hyundai's recall campaign number is 109.
Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗
NHTSA investigations
4AQ23002 · Hyundai And Kia Abs Module Fires
Opened Nov 17, 2023 · No close date supplied
Status: open (inferred from source dates) · Service Brakes, Hydraulic:antilock/traction Control/electronic Limited Slip:control Unit/module
The Office of Defects Investigation (ODI) has received eight Hyundai Motor America (Hyundai) and eight Kia America, Inc. (Kia) Part 573 Recall Reports between 2016 and 2023. The combined 16 safety recalls all involve the antilock braking system (ABS) modules or Hydraulic Electronic Control Units (HECU) manufactured by the equipment supplier Mando. The Part 573 Recall Reports contain varying defect descriptions and differing remedy descriptions for the same or similar equipment supplied by Mando. Safety recalls included in this Audit Query (AQ) review include: Hyundai recalls 20V-520, 20V-543, 21V-161, 21V-160, 21V-303, 22V-056, 22V-810, and 23V-651. Kia recalls 16V-815, 20V-518, 20V-519, 21V-137, 21V-331, 22V-051, 22V-800, and 23V-652 The purpose of this AQ is to evaluate the timeliness and scoping of Hyundai and Kia’s defect decision making and adherence with reporting requirements; and understand the varying defect descriptions and remedies between these recalls.
EA21003 · Engine Fires
Opened Dec 22, 2021 · Closed Feb 5, 2024
Status: closed (inferred from source dates) · Engine
On March 29, 2019, the Office of Defects Investigation (ODI) opened two Preliminary Evaluations (PE19-003 on Hyundai and PE19-004 on Kia) to broadly investigate incidents of non-crash fires (regardless of origin or operational status of the vehicle) on various model year Hyundai and Kia vehicles. During the PE investigations, Hyundai and Kia issued several recalls to address vehicle fires, including those due to engine failures involving various engine types. The remedies for the engine failure recalls typically involve engine inspection (to detect existing damage), and if necessary, engine replacement. Additionally, both manufacturers have been installing an engine control software modification known as Knock Sensor Detection Software (KSDS) which is intended to detect impending engine failure, alert the driver, and limit engine power (to lessen likelihood of engine failure).KSDS is being installed under recalls and non-safety field actions, and both companies have extended limited engine warranties (see recall files). On December 22, 2021, ODI upgraded PE19-003 and PE19-004 to this Engineering Analysis (EA21-003, covering both Hyundai and Kia) to evaluate the scope of the prior recalls related to engine failures/fires and the efficacy of the recall remedies for the recalls, as well as the long-term viability of related programs and non-safety field actions being conducted by Hyundai and Kia. The former issue involved approximately 550,000 MY 2013 Hyundai Elantra, MY 2011 Kia Sorento, and MY 2012-2015 Kia Rio. The latter issue involved approximately 2.5 million recalled vehicles, which have been identified as displaying potential remedy concerns: Hyundai recalls 15V-568, 17V-226, 20V-746, and 21V-727; and Kia recalls 17V-224, 19V-120, 20V-750, and 21V-844. Regarding the recall scope issue, among all of the scope vehicles identified at EA opening, ODI found only the MY 2011 Kia Sorento vehicles equipped with both the Theta II 2.4L 4-cylinder Multi-Point Injection (MPI) and the Lambda II 3.5L 6-cylinder MPI engines experienced relatively high rates of reported fires. In December 2023, Kia issued recall 23V-877 that will cover about 80,000 MY 2011 Kia Sorento vehicles equipped with the Theta II 2.4L MPI engines. The remedy will involve an inspection, and if necessary, a replacement of the engine, as well as the installation of KSDS. It should be noted that in 2021 these vehicles were included in a KSDS product improvement campaign with warranty extension. For the MY 2011 Sorento vehicles equipped with the Lambda II 3.5L engines, ODI believes that future engine failures/fires involving these vehicles will likely be due to a lax in adhering to the proper or scheduled engine maintenance (regular engine oil changes), rather than a design or manufacturing engine issue. Regarding the issue of the efficacy of the recall remedies, ODI found the majority of the recalled Hyundai and Kia vehicles, by model, experienced lower reported fire rates after the remedies were applied. Furthermore, ODI found that for most vehicles that did not receive the recall remedies, by model, experienced relatively high fire rates. To address this problem, Hyundai informed ODI in December 2023, that it will renotify all of its owners covered by the Hyundai recalls of engine failures/fires every 8 months for the next 3 years. In December 2023, Kia stated that it will renotify the majority of its owners every 8 months for the next 3 years.Several previously recalled Kia models are excluded from the renotification due to their lower reported rates of engine fires. Overall, the renotification actions will help to increase the recall completion rates, thus reduce the frequency of engine fires in the future. In view of the recall action being taken by Kia and renotification actions being taken by both Kia and Hyundai, ODI is closing this Engineering Analysis. Also, both companies have been released from the 2020-iniated Consent Orders (Kia since November 2022 and Hyundai since November 2023). The agency reserves the right to take additional action if warranted by future circumstances. To review the reports cited in the Closing Resume ODI Report Identification Number document, go to NHTSA.gov.
DP21003 · Throttle Control System Vulnerabilities
Opened Nov 12, 2021 · Closed Jun 20, 2023
Status: closed (inferred from source dates) · Vehicle Speed Control:throttle
The Office of Defects Investigation (ODI) of the National Highway Traffic Safety Administration (NHTSA) received a petition letter dated October 10, 2021, requesting an investigation of possible defects in the electronic throttle control (ETC) system on certain Kia vehicles resulting in the opening of DP21-003. Accordingly, Model Year (MY) 2005-2016 Kia Optima/K5, MY 2006-2015 Kia Sorento, MY 2007-2016 Hyundai Elantra, MY 2007-2016 Hyundai Santa Fe, MY 2006-2015 Hyundai Sonatas are all part of the subject population. The petition was originally filed as a Vehicle Owner Questionnaire that can be reviewed at NHTSA.gov under reference (ODI) number 11439675.On November 12, 2021, ODI opened Defect Petition DP21-003 to evaluate the petitioner?s request. ODI performed trend analyses of the VOQs related to vehicle speed control issues for all the subject vehicles and found that none of the 52 Model/Model Year Hyundai/Kia vehicles demonstrated any actionable trend that warranted an investigation.Petitioners submitted 1119 VOQs and non-VOQ cases in which sudden uncommanded acceleration (SUA) or loss of motive power (LOMP) incidents were alleged.For the 1119 reports, 220 were incidents involving crashes, from which 69 subject Hyundai-Kia vehicles were inspected by Hyundai/Kia dealer technicians, Hyundai/Kia engineers, and/or third-party representatives.ODI found the inspections identified no vehicle defects related to the ETC system.Of the 220 crash-involved reports, 13 Event Data Recorder (EDR) records were downloaded successfully and 11 of those indicated driver error: (i.e.) pedal misapplication.A condition where the accelerator pedal is mistakenly applied instead of the brake pedal when the driver wants to stop the vehicle.In addition, ODI reviewed a scientific journal paper published in Forensic Science International in 2016 by Mr. Park et al ., as well as related test videos. ODI does not believe there is any evidence of uncontrollable SUA occurrences in any of the tests reviewed. NHTSA's Office of Vehicle Safety Compliance (OVSC) reviewed the allegations regarding the potential noncompliance with Federal Motor Vehicle Safety Standard No. 124.Based on the information provided, the Agency concludes there is insufficient information for us to determine if a possible non-compliance exists.Finally, both Hyundai and Kia informed ODI that all their vehicles manufactured after 2012 were equipped with an ETC management system, in which the engine speed will go to idle when the system sees signals from both the brake pedal and accelerator pedal at the same time; this is commonly known as the brake-throttle override system.After thoroughly assessing the material submitted by the petitioner, information already in NHTSA's possession, information submitted by Hyundai and Kia in response to an Information Request letter, and the potential risks to safety implicated by the petitioner's allegation, NHTSA does not believe that a formal investigation is warranted. After full consideration of appropriate factors, the petition is denied. A Federal Register Notice (FRN) further detailing NHTSA?s reasons for denial of the petition will be published.
EA12008 · Headliner Bracket Detachment
Opened Sep 13, 2012 · Closed Dec 9, 2013
Status: closed (inferred from source dates) · Air Bags:side/window; Structure:body:roof And Pillars; Unknown Or Other
In March 2013, Hyundai issued a safety recall to reinforce the attachment of the metal support brackets to the headliner assembly in approximately 186,254 model year 2011-2013 Hyundai Elantra vehicles built in Korea and sold in the U.S. (see NHTSA recall 13V-115 for more information).The recall covers vehicles built up to March 5, 2013.After that date, Hyundai began using headliners with reinforced bracket attachments in the Korea-built Elantra vehicles.ODI has opened a Recall Query (RQ13-004) to investigate model year 2009-2012 Hyundai Elantra Touring vehicles.During EA12-008, ODI found these vehicles are equipped with a support bracket design and layout similar to that in the above-mentioned Elantra vehicles.Also, the headliner manufacturing processes used were similar for both models.Like the Elantra vehicles built before the recall, the Elantra Touring model headliner does not contain reinforced bracket attachments.This Engineering Analysis is closed.See attached report for additional information.The ODI report cited above can be reviewed online at http://www-odi.nhtsa.dot.gov/owners/SearchNHTSAID under the following identification number: 10457696
Additional source detail variants (3)
Air Bags:side/window
In March 2013, Hyundai issued a safety recall to reinforce the attachment of the metal support brackets to the headliner assembly in approximately 186,254 model year 2011-2013 Hyundai Elantra vehicles built in Korea and sold in the U.S. (see NHTSA recall 13V-115 for more information).The recall covers vehicles built up to March 5, 2013.After that date, Hyundai began using headliners with reinforced bracket attachments in the Korea-built Elantra vehicles.ODI has opened a Recall Query (RQ13-004) to investigate model year 2009-2012 Hyundai Elantra Touring vehicles.During EA12-008, ODI found these vehicles are equipped with a support bracket design and layout similar to that in the above-mentioned Elantra vehicles.Also, the headliner manufacturing processes used were similar for both models.Like the Elantra vehicles built before the recall, the Elantra Touring model headliner does not contain reinforced bracket attachments.This Engineering Analysis is closed.See attached report for additional information.The ODI report cited above can be reviewed online at http://www-odi.nhtsa.dot.gov/owners/SearchNHTSAID under the following identification number: 10457696
Structure:body:roof And Pillars
In March 2013, Hyundai issued a safety recall to reinforce the attachment of the metal support brackets to the headliner assembly in approximately 186,254 model year 2011-2013 Hyundai Elantra vehicles built in Korea and sold in the U.S. (see NHTSA recall 13V-115 for more information).The recall covers vehicles built up to March 5, 2013.After that date, Hyundai began using headliners with reinforced bracket attachments in the Korea-built Elantra vehicles.ODI has opened a Recall Query (RQ13-004) to investigate model year 2009-2012 Hyundai Elantra Touring vehicles.During EA12-008, ODI found these vehicles are equipped with a support bracket design and layout similar to that in the above-mentioned Elantra vehicles.Also, the headliner manufacturing processes used were similar for both models.Like the Elantra vehicles built before the recall, the Elantra Touring model headliner does not contain reinforced bracket attachments.This Engineering Analysis is closed.See attached report for additional information.The ODI report cited above can be reviewed online at http://www-odi.nhtsa.dot.gov/owners/SearchNHTSAID under the following identification number: 10457696
Unknown Or Other
In March 2013, Hyundai issued a safety recall to reinforce the attachment of the metal support brackets to the headliner assembly in approximately 186,254 model year 2011-2013 Hyundai Elantra vehicles built in Korea and sold in the U.S. (see NHTSA recall 13V-115 for more information).The recall covers vehicles built up to March 5, 2013.After that date, Hyundai began using headliners with reinforced bracket attachments in the Korea-built Elantra vehicles.ODI has opened a Recall Query (RQ13-004) to investigate model year 2009-2012 Hyundai Elantra Touring vehicles.During EA12-008, ODI found these vehicles are equipped with a support bracket design and layout similar to that in the above-mentioned Elantra vehicles.Also, the headliner manufacturing processes used were similar for both models.Like the Elantra vehicles built before the recall, the Elantra Touring model headliner does not contain reinforced bracket attachments.This Engineering Analysis is closed.See attached report for additional information.The ODI report cited above can be reviewed online at http://www-odi.nhtsa.dot.gov/owners/SearchNHTSAID under the following identification number: 10457696
Illustration