I was driving in heavy traffic on the Manhattan Bridge in Brooklyn, NY on a 2018 Husqvarna Vitpilen 701 motorcycle when my hydraulic clutch suddenly stopped functioning. The bike has only about 70 miles on the odometer. This clutch problem caused the motorcycle to jerk to a stop. It was difficult to shift into neutral to restart…
Read full complaint
I was driving in heavy traffic on the Manhattan Bridge in Brooklyn, NY on a 2018 Husqvarna Vitpilen 701 motorcycle when my hydraulic clutch suddenly stopped functioning. The bike has only about 70 miles on the odometer. This clutch problem caused the motorcycle to jerk to a stop. It was difficult to shift into neutral to restart the vehicle and there was a long line of cars behind me on the bridge with no breakdown lane. I was barely able to get the vehicle off the bridge. Every time I had to slow down to avoid a collision, the bike would stall. I learned that the problem was pervasive among the motorcycles with this hydraulic clutch slave cylinder system and saw evidence of hydraulic fluid leaking under the slave cylinder. There are many Husqvarna Vitpilen owners' discussion groups that are discussing the problem and how to solve it. The consensus seems to be that the OEM hydraulic clutch slave cylinder is defective. There is no warning lamp for this issue, and the manufacturer and dealer had not announced anything about it. I had heard about it from other owners of this kind of vehicle. The bike can not be safely driven with this defect and I feel lucky to be alive after the incident I described above.
KTM North America, Inc. (KTM) is recalling certain 2018-2020 690 Enduro R, Vitpilen 701, 701 Enduro, 701 Supermoto, 2019-2020 690 SMC R, Svartpilen, 2018-2019 690 Duke, and 2020 701 Enduro LR motorcycles. The bellow-style gasket on the clutch slave cylinder may have been damaged during manufacturing, which could cause the clutch to become inoperable and not disengage when the clutch lever is pulled in.
Consequence & remedy
Consequence: An inoperable clutch increases the risk of a crash.
Remedy: Dealers will inspect the clutch slave cylinder and replace it if necessary, free of charge. Owner notification letters are expected to be mailed December 3, 2021. Owners may contact KTM customer service at 1-888-985-6090. KTM's numbers for this recall are KTB2112 and HTB2110.
KTM North America, Inc. (KTM) is recalling certain 2018-2020 Husqvarna Motorcycle 701 Vitpilen and 2019-2020 701 Svartpilen motorcycles. The gear teeth on the license plate holder and swingarm may be positioned incorrectly, possibly resulting in a loose rear axle nut, causing the license plate holder to contact the rear wheel.
Consequence & remedy
Consequence: License plate bracket interference with the rear wheel can increase the risk of a crash or injury.
Remedy: Dealers will inspect and realign the gear teeth on the license plate holder and swingarm, and inspect the tightness of the rear wheel axle collar, free of charge. Owner notification letters were mailed on October 1, 2021. Owners may contact KTM customer service at 1-888-985-6090. KTM's number for this recall is HTB2106.
KTM North America, Inc. (KTM) is recalling certain 2018-2020 Husqvarna Motorcycle 701 Vitpilen and 2019-2020 701 Svartpilen motorcycles. The gear teeth on the license plate holder and swingarm may be positioned incorrectly, possibly resulting in a loose rear axle nut, causing the license plate holder to contact the rear wheel.
Consequence: License plate bracket interference with the rear wheel can increase the risk of a crash or injury.
Remedy: Dealers will inspect and realign the gear teeth on the license plate holder and swingarm, and inspect the tightness of the rear wheel axle collar, free of charge. Owner notification letters were mailed on October 1, 2021. Owners may contact KTM customer service at 1-888-985-6090. KTM's number for this recall is HTB2106.
Suspension:rear:motorcycle Fork/swingarm
KTM North America, Inc. (KTM) is recalling certain 2018-2020 Husqvarna Motorcycle 701 Vitpilen and 2019-2020 701 Svartpilen motorcycles. The gear teeth on the license plate holder and swingarm may be positioned incorrectly, possibly resulting in a loose rear axle nut, causing the license plate holder to contact the rear wheel.
Consequence: License plate bracket interference with the rear wheel can increase the risk of a crash or injury.
Remedy: Dealers will inspect and realign the gear teeth on the license plate holder and swingarm, and inspect the tightness of the rear wheel axle collar, free of charge. Owner notification letters were mailed on October 1, 2021. Owners may contact KTM customer service at 1-888-985-6090. KTM's number for this recall is HTB2106.
KTM North America, Inc. (KTM) is recalling certain 2019-2020 Husqvarna 701 Svartpilen and 2018-2020 Husqvarna 701 Vitpilen motorcycles. Fuel may leak from the fuel level sensor and fuel pump mounting area.
Consequence & remedy
Consequence: A fuel leak can increase the risk of a fire in the presence of an ignition source, and increase the risk of damage or injury.
Remedy: KTM will notify owners, and Husqvarna Motorcycle Dealers will replace the affected fuel tank, install new gaskets, and update software for proper fuel calibration, free of charge. Owners will be notified to take their motorcycles to a Husqvarna Motorcycle North America, Inc. (HMNA) dealership for repairs. The recall began July 7, 2020. Owners may contact HMNA customer service at 1-888-985-6090. HMNA's number for this recall is HTB2012.
Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗
NHTSA investigations
0
No exact-year investigations in this snapshot.
2018 Husqvarna Vitpilen 701 Problems, Complaints & Recalls | Skip That Year
Illustration