IllustrationNOTICED RED PAINT FADING ON ROOF, TRUNK, DOORS, ETC. UNDERSTAND HONDA CHEAPED OUT ON THE PRIMER AND UV PROTECTION CLEAR COAT ON THEIR CARS. I UNDERSTAND THAT THEY NEED TO MAKE THIS RIGHT AND PROVIDE A FREE PAINT JOB TO THE AFFECTED CUSTOMERS AND THAT INCLUDES ME!
2008 Honda Fit
Owner reports · Recalls · Investigations
Similar to other model years
Owner complaints for the 2008 Honda Fit do not stand out strongly from the model-year median of 128.
About this comparison →How this year compares
Owner complaints by model year
Compare all Fit years →Counts vary with age, sales and reporting. They are not failure rates.
What owners reported most
All reported categories
Tap a category to read its complaints. One report may name several components.
When problems were reported
Mileage at the reported incident
260–25K
3025–50K
2050–75K
2975–100K
34100–150K
12150K+
151 reports with mileage · 66 unknown
NHTSA’s mileage field refers to the reported incident, not necessarily the filing date. This shows report counts, not the likelihood of a failure.
What to inspect
Issues worth paying extra attention to based on owner reports.
- Air Bags. Review the 57 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
- Structure. Review the 43 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
- Power Train. Review the 24 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
NHTSA owner reports · September 18, 2026 snapshot.
28 crash reports2 fire reports18 injury reports
Structure complaints
43 reports2008 HONDA FIT SPORT: POOL OF WATER FORMS IN THE HATCHBACK WHERE THE SPARE TIRE IS STORED. FLOOR OF BACK SEAT AND THE CARGO AREA BEHIND BACK SEAT IS ALWAYS WET, AND IS NOW GROWING MOLD. WATER HAS DRIPPED DOWN ON THE DRIVER SIDE HITTING MY HEAD. I AM ALSO CONCERNED THAT THE FLOORS WILL RUST AS WELL. THIS IS ONGOING. I LIVE IN …
Read full complaint
2008 HONDA FIT SPORT: POOL OF WATER FORMS IN THE HATCHBACK WHERE THE SPARE TIRE IS STORED. FLOOR OF BACK SEAT AND THE CARGO AREA BEHIND BACK SEAT IS ALWAYS WET, AND IS NOW GROWING MOLD. WATER HAS DRIPPED DOWN ON THE DRIVER SIDE HITTING MY HEAD. I AM ALSO CONCERNED THAT THE FLOORS WILL RUST AS WELL. THIS IS ONGOING. I LIVE IN SEATTLE AND HAVE LIVED IN ST. LOUIS WITH THIS CAR. BETWEEN THIS STRUCTURAL ISSUE AND THE AIRBAG - LAST TIME I BUY A HONDA.
MY CAR IS CURRENTLY "LEAKING". THERE'S NO OTHER WAY TO DESCRIBE IT. WHEN IT RAINS A POOL OF WATER FORMS IN THE HATCHBACK WHERE THE SPARE TIRE IS STORED. THE FLOOR OF THE BACK SEAT GETS SOAKED THROUGH WITH WATER. BECAUSE THE WATER IS SO EXCESSIVE, THE CAR IS NEVER ABLE FULL DRY OUT, AND MOLD IS FORMING. I DO NOT HAVE A GARAGE, TH…
Read full complaint
MY CAR IS CURRENTLY "LEAKING". THERE'S NO OTHER WAY TO DESCRIBE IT. WHEN IT RAINS A POOL OF WATER FORMS IN THE HATCHBACK WHERE THE SPARE TIRE IS STORED. THE FLOOR OF THE BACK SEAT GETS SOAKED THROUGH WITH WATER. BECAUSE THE WATER IS SO EXCESSIVE, THE CAR IS NEVER ABLE FULL DRY OUT, AND MOLD IS FORMING. I DO NOT HAVE A GARAGE, THEREFORE THE CAR IS ALWAYS SUBJECT TO THE ENVIRONMENTAL ELEMENTS. I HAVE SERIOUS CONCERNS ABOUT EXPOSURE TO MOLD GROWTH FROM THIS SITUATION. I AM PREGNANT, WITH A CHILD DUE IN SEPTEMBER. I AM CONCERNED BECAUSE MY DAILY COMMUTE TO WORK IS OVER 30 MINUTES EACH WAY (OVER AN HOUR TOTAL) AND MY SHIFT BEGINS SO EARLY I ALWAYS HAVE THE WINDOWS ALL THE WAY UP (TOO COLD IN OHIO). I USE THIS CAR TO TRANSPORT MYSELF EVERYWHERE, AND ONCE THE BABY COMES I DON'T FEEL COMFORTABLE EXPOSING AN INFANT TO THAT KIND OF MOLD. ITS EXTREMELY DANGEROUS FOR CHILDREN (AND PEOPLE WITH COMPROMISED IMMUNE SYSTEMS, LIKE PREGNANT WOMEN!) TO BE EXPOSED TO MOLD ON A DAILY BASIS.
TL* THE CONTACT OWNS A 2008 HONDA FIT. THE CONTACT STATED THAT THE REAR FLOORBOARD IN THE VEHICLE CONTAINED A LARGE PILE OF MOLD. THE VEHICLE WAS NOT REPAIRED. THE MANUFACTURER WAS NOT NOTIFIED OF THE FAILURE. THE APPROXIMATE FAILURE MILEAGE WAS 64,000.
AFTER A VERY HEAVY RAINSTORM, WE FOUND A COUPLE INCHES OF WATER IN THE FRONT PASSENGER SIDE FLOOR. SINCE THEN EVEN LIGHT RAINS ARE CAUSING WATER TO ACCUMULATE BOTH IN THE FRONT PASSENGER SIDE AND BACK PASSENGER SIDE FLOOR. IT IS DIFFICULT TO REMOVE THE WATER AND MOLD WILL CERTAINLY BE STARTING TO FORM SOON.
BOUGHT USED 2008 FIT IN JAN/2014. NOTED WATER IN DRIVER AND REAR PASSENGER FLOORS/CARPET AND DOORS FOLLOWING RAIN STORM. TOOK WET CAR TO SHEEHY FORD IN MECHANICSVILLE (WHERE I PURCHASED IT) WITHIN THE USED WARRANTY. WAS TOLD THEY "COULD NOT FIND CAUSE". NOTHING DONE. SINCE THEN AND TO DATE (10/30/2015), WATER CONTINUES TO A…
Read full complaint
BOUGHT USED 2008 FIT IN JAN/2014. NOTED WATER IN DRIVER AND REAR PASSENGER FLOORS/CARPET AND DOORS FOLLOWING RAIN STORM. TOOK WET CAR TO SHEEHY FORD IN MECHANICSVILLE (WHERE I PURCHASED IT) WITHIN THE USED WARRANTY. WAS TOLD THEY "COULD NOT FIND CAUSE". NOTHING DONE. SINCE THEN AND TO DATE (10/30/2015), WATER CONTINUES TO ACCUMULATE IN THESE AREAS FOLLOWING RAINFALL. MUSTY/MOLD ODOR - WHERE IS THE RECALL ON THIS ISSUE?
RAIN WATER IS LEAKING INTO THE INTERIOR OF THE CAR FROM MULTIPLE ENTRY POINTS. ONE IDENTIFIED ENTRY POINT ARE CRACKS IN THE BONDING MATERIAL BETWEEN THE ROOF AND REAR UPPER SIDE PANELS THAT ALLOWS WATER INTO THE SPARE TIRE WELL AND REAR FLOORBOARDS. ADDITIONAL WATER IS ACCUMULATING IN THE FRONT PASSENGER FOOTWELL FROM AN UNDETER…
Read full complaint
RAIN WATER IS LEAKING INTO THE INTERIOR OF THE CAR FROM MULTIPLE ENTRY POINTS. ONE IDENTIFIED ENTRY POINT ARE CRACKS IN THE BONDING MATERIAL BETWEEN THE ROOF AND REAR UPPER SIDE PANELS THAT ALLOWS WATER INTO THE SPARE TIRE WELL AND REAR FLOORBOARDS. ADDITIONAL WATER IS ACCUMULATING IN THE FRONT PASSENGER FOOTWELL FROM AN UNDETERMINED LOCATION BEHIND THE GLOVE BOX/DASH. THIS HAS RESULTED IN MILDEW AND MOLD GROWTH IN THE INTERIOR CARPETING, MATTING AND FOAM. THIS IS A HEALTH RISK ESPECIALLY TO YOUNG CHILDREN AND ADULTS WITH RESPIRATORY CONDITIONS.
THE UPPER REAR PANEL (WHERE THERE IS A GROOVE WHERE THE FRAME COMES TOGETHER AND YOU COULD ATTACH A ROOF RACK) ON THE DRIVER'S SIDE SEPARATED A LITTLE AND WATER CAME INTO THE CAR. IT SOAKED THE TRUNK AND FLOOR BEHIND THE DRIVERS SEAT. THE WATER ALSO DAMAGED THE ABS SENSORS. I HAD TO REPLACE THE ABS SENSORS AND SORT OF CAULK TH…
Read full complaint
THE UPPER REAR PANEL (WHERE THERE IS A GROOVE WHERE THE FRAME COMES TOGETHER AND YOU COULD ATTACH A ROOF RACK) ON THE DRIVER'S SIDE SEPARATED A LITTLE AND WATER CAME INTO THE CAR. IT SOAKED THE TRUNK AND FLOOR BEHIND THE DRIVERS SEAT. THE WATER ALSO DAMAGED THE ABS SENSORS. I HAD TO REPLACE THE ABS SENSORS AND SORT OF CAULK THE GAP BETWEEN THE PANELS. I FOUND OUT ABOUT THE PROBLEM WHEN MY ABS LIGHT ON MY DASH WENT ON.
2008 HONDA FIT BASE MODEL: FLOOR OF BACK SEAT AND THE CARGO AREA BEHIND BACK SEAT IS WET, AND IS NOW GROWING MOLD. I HAVE NO IDEA HOW SO MUCH MOISTURE/WATER IS GETTING INTO THE CARPET. I AM ALSO CONCERNED THAT THE FLOORS WILL RUST AS WELL. SERIOUSLY, HONDA STEP UP AND ISSUE A RECALL AND FIX THIS ISSUE!! I WILL BE FILING A COMPLA…
Read full complaint
2008 HONDA FIT BASE MODEL: FLOOR OF BACK SEAT AND THE CARGO AREA BEHIND BACK SEAT IS WET, AND IS NOW GROWING MOLD. I HAVE NO IDEA HOW SO MUCH MOISTURE/WATER IS GETTING INTO THE CARPET. I AM ALSO CONCERNED THAT THE FLOORS WILL RUST AS WELL. SERIOUSLY, HONDA STEP UP AND ISSUE A RECALL AND FIX THIS ISSUE!! I WILL BE FILING A COMPLAINT WITH THE AG'S OFFICE!
I HAVE A 2008 HONDA FIT THAT IS LEAKING IN THE BACK FLOOR BOARDS AND TRUNK. *TR
Official recalls
820V770000 · Power Train:driveline:driveshaft
Dec 10, 2020
Honda (American Honda Motor Co.) is recalling certain 2013-2015 Acura ILX, 2013 Acura ILX Hybrid, 2012 Honda Civic Hybrid, and 2007-2008 Honda Fit vehicles with a manual transmission and 2009-2013 Honda Fit vehicles originally sold, or ever registered, in Connecticut, Delaware, District of Columbia, Illinois, Indiana, Iowa, Kentucky, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, Virginia, West Virginia, and Wisconsin. The drive shafts' protective coating may not have been applied properly during manufacturing, making it more susceptible to damage from road salt, or other contaminants, and potentially cause it to break.
Consequence & remedy
Consequence: A broken drive shaft may cause a sudden loss of drive power. The vehicle could also roll away if the parking brake has not been applied before the vehicle has been exited. Either condition can increase the risk of a crash or injury.
Remedy: Honda will notify owners, and dealers will inspect the drive shafts, replacing either the left or right drive shaft, if necessary, free of charge. Owners were notified of the safety risk with an interim letter mailed February 2, 2021. A second letter will be sent once the remedy is available. Owners may contact Honda customer service at 1-888-234-2138. Honda's numbers for this recall are P9M, PAV, BAY, TAX, CA0, and MAZ.
19V501000 · Air Bags:frontal:passenger Side:inflator Module
Jun 27, 2019
Honda (American Honda Motor Co.) is recalling certain 2003-2006 Acura MDX, 2005-2012 RL, 2003-2007 Honda Accord, 2001-2005 Civic, 2003-2005 Civic Hybrid, 2001-2005 Civic GX NGV, 2002-2006 CR-V, 2003-2011 Element, 2007-2008 Fit, 2002-2004 Odyssey, 2003-2008 Pilot, and 2006-2014 Ridgeline vehicles. The vehicles are equipped with passenger frontal air bag inflators assembled as a recall remedy part or replacement service part, that may explode due to propellant degradation occurring after long-term exposure to high absolute humidity, temperature and temperature cycling.
Consequence & remedy
Consequence: An inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.
Remedy: Honda will notify owners, and dealers will replace the passenger frontal airbag inflator, free of charge. The recall began August 12, 2019. Owners may contact Honda customer service at 1-888-234-2138. Honda's numbers for this recall are E5D and X5C.
17V029000 · Air Bags:frontal:passenger Side:inflator Module
Jan 10, 2017
Honda (American Honda Motor Co.) is recalling certain 2005-2006 Acura MDX and Honda CR-V vehicles, 2005-2011 Honda Element vehicles, 2005-2012 Acura RL vehicles, 2006-2012 Honda Ridgeline vehicles, 2007-2008 Honda Fit vehicles and 2005-2008 Honda Pilot vehicles originally sold, or ever registered, in Alabama, California, Florida, Georgia, Hawaii, Louisiana, Mississippi, South Carolina, Texas, Puerto Rico, American Samoa, Guam, the Northern Mariana Islands (Saipan), and the U.S. Virgin Islands, or "Zone A." Additionally, if not included in "Zone A" above, Honda is recalling certain 2005-2006 Acura MDX and Honda CR-V vehicles, 2005-2009 Acura RL and Honda Element vehicles, 2007-2008 Honda Fit vehicles, 2005-2008 Honda Pilot vehicles and 2006-2009 Honda Ridgeline vehicles originally sold, or ever registered, in Arizona, Arkansas, Delaware, District of Columbia, Illinois, Indiana, Kansas, Kentucky, Maryland, Missouri, Nebraska, Nevada, New Jersey, New Mexico, North Carolina, Ohio, Oklahoma, Pennsylvania, Tennessee, Virginia, and West Virginia, or "Zone B." Additionally, if not included in "Zone A" or "Zone B" above, Honda is recalling certain 2005-2006 Acura MDX and Honda CR-V vehicles, 2005-2008 Acura RL, Honda Element and Honda Pilot vehicles, 2007-2008 Honda Fit vehicles and 2006-2008 Honda Ridgeline vehicles originally sold, or ever registered in Alaska, Colorado, Connecticut, Idaho, Iowa, Maine, Massachusetts, Michigan, Minnesota, Montana, New Hampshire, New York, North Dakota, Oregon, Rhode Island, South Dakota, Utah, Vermont, Washington, Wisconsin, and Wyoming. These vehicles are equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules used as original equipment or replacement equipment. In the event of a crash necessitating deployment of the front air bags, these inflators may rupture due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling.
Consequence & remedy
Consequence: An inflator rupture may result in metal fragments striking the vehicle occupants resulting in serious injury or death.
Remedy: Honda will notify owners, and dealers will replace the front passenger air bag inflator, free of charge. The recall bagan March 2017. Owners may contact Honda customer service at 1-888-234-2138. Honda's numbers for this recall are KD9 and KE0.
16V344000 · Air Bags:frontal:passenger Side:inflator Module
May 23, 2016
Honda (American Honda Motor Co.) is recalling certain model year 2003-2006 Acura MDX, 2005-2011 Acura RL, 2005-2006 Honda CR-V, 2003-2011 Element, 2007-2008 Fit, 2003-2008 Pilot, 2002-2004 Odyssey, and 2006-2011 Ridgeline vehicles originally sold, or that have ever been registered, in Alabama, California, Florida, Georgia, Hawaii, Louisiana, Mississippi, South Carolina, Texas, Puerto Rico, American Samoa, Guam, the Northern Mariana Islands (Saipan), and the U.S. Virgin Islands, or "Zone A." Additionally, unless included in "Zone A" above, Honda is recalling certain model year 2003-2006 Acura MDX, 2005-2008 Acura RL, 2005-2006 Honda CR-V, 2003-2008 Element, 2007-2008 Fit, 2003-2008 Pilot, 2002-2004 Odyssey, and 2006-2008 Ridgeline vehicles originally sold, or that have ever been registered, in Arizona, Arkansas, Delaware, District of Columbia, Illinois, Indiana, Kansas, Kentucky, Maryland, Missouri, Nebraska, Nevada, New Jersey, New Mexico, North Carolina, Ohio, Oklahoma, Pennsylvania, Tennessee, Virginia, and West Virginia, or "Zone B." Lastly, unless included in "Zone A" or "Zone B" above, Honda is recalling model year 2002-2004 Odyssey and model year 2003-2004 Acura MDX, Honda Element, and Honda Pilot vehicles originally sold, or registered, in Alaska, Colorado, Connecticut, Idaho, Iowa, Maine, Massachusetts, Michigan, Minnesota, Montana, New Hampshire, New York, North Dakota, Oregon, Rhode Island, South Dakota, Utah, Vermont, Washington, Wisconsin, and Wyoming. These vehicles are equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules, and used as original equipment or replacement equipment. In the event of a crash necessitating deployment of the front air bags, these inflators may rupture due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling.
Consequence & remedy
Consequence: An inflator rupture may result in metal fragments striking the vehicle occupants resulting in serious injury or death.
Remedy: Honda will notify owners, and dealers will replace the passenger frontal air bag inflator, free of charge. The recall began June 27, 2016. Owners may contact Honda customer service at 1-888-234-2138. Honda's numbers for this recall are KA0, KA1, KA2, and KA3.
13V260000 · Visibility:power Window Devices And Controls
Jun 24, 2013
Honda is re-recalling certain model year 2007-2008 Fit vehicles covered under previous recall 10V-033. The remedy applied in this earlier recall may have been insufficient. In the affected vehicles, over time, the plastic cover may separate from the master power window switch allowing water to enter the driver's window and reach the master power window switch. If the master power window switch is damaged as a result of the water intrusion, overheating and failure of the switch may result.
Consequence & remedy
Consequence: An overheated switch can cause smoke, melting and fire.
Remedy: Honda will notify owners in July 2013 and will instruct owners to take their vehicles to dealers to have a free inspection conducted. If the switch is damaged, it will be replaced free of charge. If the switch is not damaged, the owner will be instructed to await a second notification that will instruct them to return to the dealer to have a replacement switch installed free of charge. Honda anticipates it will have sufficient parts inventory to notify owners of vehicles with undamaged switches to return to dealers for replacement switches in Fall 2013. Renotification was sent out to owners on July 23, 2014. Owners may contact Honda at 1-800-999-1009. Honda's recall number is JA6.
10V624000 · Exterior Lighting:headlights:high/low Beam Dimmer Switch
Dec 15, 2010
HONDA IS RECALLING MODEL YEAR 2007-2008 HONDA FIT VEHICLES. DUE TO AN ERROR DURING INSTALLATION OF THE WIRING HARNESS FOR THE COMBINATION SWITCH THAT CONTROLS LOW HEAD BEAM FUNCTION, THE WIRES FOR THE LOWER BEAM CIRCUIT WERE PULLED TIGHTER THAN INTENDED. AFTER REPEATED USE OF THE HEADLIGHT SWITCH, THE ELECTRICAL CONNECTOR TERMINAL FOR THE LOW BEAM HEADLIGHT CIRCUIT CAN BECOME WORN AS A RESULT OF THIS TENSION, WHICH CAN RESULT IN LOW CONDUCTIVITY AND CAUSE AN ACCUMULATION OF COPPER OXIDE IN THE AREA OF THE CONTACTS.
Consequence & remedy
Consequence: THE LOW BEAM HEADLIGHTS CAN BECOME INOPERATIVE DECREASING THE DRIVER'S VISIBILITY AS WELL AS THE VEHICLE'S VISIBILITY TO OTHER DRIVERS, INCREASING THE RISK OF A CRASH.
Remedy: DEALERS WILL INSPECT THE LOW BEAM TERMINAL AND PERFORM NECESSARY REPAIRS FREE OF CHARGE. THE SAFETY RECALL BEGAN ON JANUARY 24, 2011. OWNERS MAY CONTACT HONDA AT 1-800-999-1009.
10V033000 · Visibility:power Window Devices And Controls
Feb 2, 2010
HONDA IS RECALLING CERTAIN MODEL YEAR 2007-2008 FIT VEHICLES. UNDER SEVERE CONDITION, WATER MAY ENTER THE DRIVER'S WINDOW AND REACH THE MASTER POWER WINDOW SWITCH. IF THE MASTER POWER WINDOW SWITCH IS DAMAGED AS A RESULT OF THE WATER INTRUSION, OVERHEATING AND FAILURE OF THE SWITCH MAY RESULT.
Consequence & remedy
Consequence: AN OVERHEATED SWITCH CAN CAUSE SMOKE, MELTING AND FIRE.
Remedy: DEALERS WILL INSPECT THE SWITCH AND INSTALL A COVER AROUND THE SWITCH HOUSING TO PREVENT WATER FROM ENTERING THE SWITCH. IF THE SWITCH IS DAMAGED, THE SWITCH WILL BE REPLACED AND A COVER WILL BE INSTALLED. THIS SERVICE WILL BE PERFORMED FREE OF CHARGE. THE SAFETY RECALL BEGAN ON DURING MARCH 19, 2010. OWNERS MAY CONTACT HONDA AT 1-800-999-1009.
07V549000 · Air Bags:frontal
Dec 3, 2007
ON CERTAIN VEHICLES ORIGINALLY SOLD IN OR CURRENTLY REGISTERED IN THE STATES OF CONNECTICUT, DELAWARE, ILLINOIS, INDIANA, IOWA, KENTUCKY, MAINE, MARYLAND, MASSACHUSETTS, MICHIGAN, MINNESOTA, MISSOURI, NEW HAMPSHIRE, NEW JERSEY, NEW YORK, OHIO, PENNSYLVANIA, RHODE ISLAND, VERMONT, VIRGINIA, WEST VIRGINIA , WISCONSIN AND THE DISTRICT OF COLUMBIA. THE WIRE HARNESS FOR THE OCCUPANT DETECTION SYSTEM (ODS) AND THE OCCUPANT POSITION DETECTION SYSTEM (OPDS) IS ROUTED UNDERNEATH THE CARPET ON THE DRIVER'S SIDE FLOORBOARD. IN AREAS WHERE ROAD SALT IS USED, SALT FROM THE SNOW ON THE DRIVER'S SHOES WILL MELT AND MAY PENETRATE THE CARPET AND LEAK INTO THE WIRE HARNESS. IF THE HARNESS IS EXPOSED TO SALT BRINE, CORROSION MAY OCCUR AND THE WIRE MAY BREAK CAUSING THE SRS INDICATOR LIGHT TO ILLUMINATE. A FAILURE OF THE ODS AND OPDS MAY NOT DETECT THE PRESENCE OF A CHILD SEAT OR AN OUT-OF-POSITION PASSENGER AND DEPLOYMENT OF BOTH THE FRONT SEAT PASSENGER'S FRONTAL AND SIDE AIR BAGS WILL NOT BE SUPPRESSED.
Consequence & remedy
Consequence: IN THE EVENT OF A CRASH, A DEPLOYING FRONT PASSENGER AIR BAG OR FRONT PASSENGER'S SIDE AIR BAG WILL INCREASE THE RISK OF INJURY TO SMALL OR OUT-OF-POSITION OCCUPANTS.
Remedy: DEALERS WILL INSPECT AND REPLACE THE WIRE HARNESS. THE RECALL BEGAN ON DECEMBER 12, 2007. OWNERS MAY CONTACT HONDA AT 800-999-1009.
Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗
NHTSA investigations
1PE10037 · Low Beam Headlights
Opened Sep 16, 2010 · Closed Dec 20, 2010
Status: closed (inferred from source dates) · Exterior Lighting:headlights; Exterior Lighting:headlights:high/low Beam Dimmer Switch; Exterior Lighting:headlights:switch
In their Defect Information Report (DIR) of December 15, 2010, American Honda Motor Company, Inc. (Honda) notified NHTSA that it will conduct a safety recall of model year 2007 and 2008 Honda Fit vehicles to repair the headlights.The recall will remedy a defect in the low beam headlight circuit that can cause a total outage of the low beam headlights.Honda's DIR states: Due to a variation in the assembly sequence when installing the wiring harness for the combination switch that controls the headlights, the wires for the low beam headlight circuit can be pulled tighter than the wiring for the other functions controlled by the combination switch.After repeated use of the headlight switch, the electrical connector terminal for the low beam headlight circuit can become worn as a result of this tension, which can result in low conductivity and cause an accumulation of copper oxide in the area of the contacts.In some cases the poor conductivity may cause the terminal ends to melt within the wiring harness connector.If this occurs, the low beam headlights can become inoperative, increasing the risk of a crash. Honda dealer's will inspect the combination switch and wiring harness and remedy the defect free of charge.Please see safety recall file 10V624 for recall details
Additional source detail variants (3)
Exterior Lighting:headlights:high/low Beam Dimmer Switch
In their Defect Information Report (DIR) of December 15, 2010, American Honda Motor Company, Inc. (Honda) notified NHTSA that it will conduct a safety recall of model year 2007 and 2008 Honda Fit vehicles to repair the headlights.The recall will remedy a defect in the low beam headlight circuit that can cause a total outage of the low beam headlights.Honda's DIR states: Due to a variation in the assembly sequence when installing the wiring harness for the combination switch that controls the headlights, the wires for the low beam headlight circuit can be pulled tighter than the wiring for the other functions controlled by the combination switch.After repeated use of the headlight switch, the electrical connector terminal for the low beam headlight circuit can become worn as a result of this tension, which can result in low conductivity and cause an accumulation of copper oxide in the area of the contacts.In some cases the poor conductivity may cause the terminal ends to melt within the wiring harness connector.If this occurs, the low beam headlights can become inoperative, increasing the risk of a crash. Honda dealer's will inspect the combination switch and wiring harness and remedy the defect free of charge.Please see safety recall file 10V624 for recall details
Exterior Lighting:headlights
In their Defect Information Report (DIR) of December 15, 2010, American Honda Motor Company, Inc. (Honda) notified NHTSA that it will conduct a safety recall of model year 2007 and 2008 Honda Fit vehicles to repair the headlights.The recall will remedy a defect in the low beam headlight circuit that can cause a total outage of the low beam headlights.Honda's DIR states: Due to a variation in the assembly sequence when installing the wiring harness for the combination switch that controls the headlights, the wires for the low beam headlight circuit can be pulled tighter than the wiring for the other functions controlled by the combination switch.After repeated use of the headlight switch, the electrical connector terminal for the low beam headlight circuit can become worn as a result of this tension, which can result in low conductivity and cause an accumulation of copper oxide in the area of the contacts.In some cases the poor conductivity may cause the terminal ends to melt within the wiring harness connector.If this occurs, the low beam headlights can become inoperative, increasing the risk of a crash. Honda dealer's will inspect the combination switch and wiring harness and remedy the defect free of charge.Please see safety recall file 10V624 for recall details
Exterior Lighting:headlights:switch
In their Defect Information Report (DIR) of December 15, 2010, American Honda Motor Company, Inc. (Honda) notified NHTSA that it will conduct a safety recall of model year 2007 and 2008 Honda Fit vehicles to repair the headlights.The recall will remedy a defect in the low beam headlight circuit that can cause a total outage of the low beam headlights.Honda's DIR states: Due to a variation in the assembly sequence when installing the wiring harness for the combination switch that controls the headlights, the wires for the low beam headlight circuit can be pulled tighter than the wiring for the other functions controlled by the combination switch.After repeated use of the headlight switch, the electrical connector terminal for the low beam headlight circuit can become worn as a result of this tension, which can result in low conductivity and cause an accumulation of copper oxide in the area of the contacts.In some cases the poor conductivity may cause the terminal ends to melt within the wiring harness connector.If this occurs, the low beam headlights can become inoperative, increasing the risk of a crash. Honda dealer's will inspect the combination switch and wiring harness and remedy the defect free of charge.Please see safety recall file 10V624 for recall details