2009 Honda CR-V

Honda issued a safety recall for rear frame corrosion; we learned of the recall in Apr 2023 & took the car to Vidmar Honda (Pueblo, CO) in Jun2023. They didn't have the equipment to conduct the inspection, said they would order it & notify us when it arrived; I followed up in Aug & Sept and they hadn't ordered the equipment. On Oct 10 I brought the car in to have the TPMS repaired & they informed me there was a safety recall. Later Vidmar informed me the car was too rusty to make the safety repair, but they repaired the TPMS (that is FRAUD). I pointed out that the Honda recall notice said the dealer would offer to repurchase the vehicle if the car could not be repaired, but Vidmar denied that was how the recall worked (Honda MISREPRESENTED the recall process to its customers). WE WERE NOT INFORMED THAT THE CAR WAS UNSAFE TO DRIVE & WE WERE PERMITTED TO TAKE THE CAR, being told that the issue was now with American Honda. I received a voicemail from Honda on Oct 12 telling me of our recall case number; I returned the call 9 times but had no further calls from Honda. On [XXX] the frame failed & the right rear tire nearly separately from the frame; the vehicle was towed to a Honda dealer in Colorado Springs & I informed both Vidmar Honda & American Honda that day of the structural failure. On Jan 12, 2024, Honda called & offered to repurchase the car (the caller was not aware that the vehicle had failed & was off the road); afterwards I received an email from Honda INFORMING US FOR THE FIRST TIME THAT OUR VEHICLE WAS UNSAFE & SHOULD NOT BE DRIVEN - 45 days after the structural failure, 84 days after the repair could not be made, and 7 months after we first tried to have the vehicle repaired. To date Honda has not made an offer in writing to repurchase the car; the GM of Vidmar showed us pictures of the car in Dec from [XXX] & said, "that's not good when you can see light coming from the other side [of the frame] " and "that's real swiss cheese there." INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMAT

Brake pedal continues to be squishy, having to be pushed all the way down to the floor to stop, after having replaced the master cylinder and brake booster Twice, flushing and replacing brake fluid, clearing air out of the brake line multiple times! Dealer has no idea how to fix this. It’s defective brake system has been serviced multiple times by Honda dealer!

I took my 2009 Honda CRV in for a recall. In salt belt states where de-icing agents are used to maintain the roadway, the de-icing agents, along with mud and dirt, could enter the rear frame through the rear frame drainage points. This could cause the rear trailing arm to come off. The dealership ended up attaching a bracket that is supposed to keep me safe. My problem is that the bracket is attached to a highly corroded area of my vehicle (as shown in the attached pictures) When I brought this up they only stated that as long as the one bolt was able to be replaced then that is all they are required to do. I feel that the bracket should at least be attached to solid metal. Also, now I have to have the bracket removed again so I can get the frame repaired (even though the recall specifically says the corrosion was caused by a design flaw that allows salt and dirt to get into the inner frame through rear frame drainage points). I feel that there should be more criteria to this recall than just one bolt because they are sending cars back on the road that are still unsafe.

I have a 2009 Honda CR-V that had a recall performed on 9/13/23. After the recall was performed the car is still not safe. But Honda is saying the car is safe even though it will not pass NYS inspection after the recall was performed. I first called Honda on 9-14-23 and they wanted documents from dealership saying it’s unsafe. On 9-18-23 the dealership put the car through NYS inspection and failed because of the area to do with the recall. Sent this information into honda. They didn’t get back to me until I called back. They went on to say the whole underside of car is bad which is not true. Then trailered car to 3 different shops. All 3 shops said the unsafe part is where the recall was performed. Sent this information into Honda and again they pushed me off basically saying not there problem. I have not driven the car since the recall has been performed. The person I spoke to at Honda went on to tell me they performed an inspection that meets NHTSA standards for the recall. But I’m wondering if it doesn’t meet NYS inspection standard how can they say it’s safe for me to drive ?

The contact owns a 2009 Honda CR-V. The contact received notification of NHTSA Campaign Number: 23V228000 (Structure). The contact stated that the vehicle was taken to the dealer where it remained. The vehicle was inspected, and it was determined that the rear subframe was damaged beyond repair due to extreme corrosion. The contact was informed by the dealer that a case would be opened. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was notified of the failure and the contact was informed that she would receive a call back however, the contact had not yet received the call back. The failure mileage was unknown. Parts distribution disconnect.

The contact owns a 2009 Honda CR-V. The contact stated while driving 55 MPH, the vehicle started shaking and vibrating. The contact stated that the check engine warning light was illuminated. The vehicle had recently been repaired under NHTSA Campaign Number: 23V228000 (Structure). The contact stated that the vehicle was shaking and vibrating at various speeds. The vehicle was taken to the yearly State vehicle inspection and the state inspectors refused to complete the inspection due to the extreme corrosion and holes in the rear sub frame. The vehicle was then taken to another State Inspection station and the contact was informed that the vehicle would not pass the State Inspection. The contact called the manufacturer and a manufacturer inspection had been scheduled. The vehicle had not been repaired. The failure mileage was 157,034.

I purchased a 2009 Honda CRV in 2017 at the West Chester Scott Honda dealership. This vehicle, when I purchased it, had 38,000 miles on it. A year after I purchased it, there was a problem with the door lock accelerator on the driver's side door. I purchased the Honda part myself and had it repaired. A month after this, the left back passenger side door had the same problem. I purchased another part and had it repaired also. About six months ago, the same problem occurred on the front passenger door and on the right back passenger door. This should not be considered normal wear and tear on a vehicle because this occurred on all four doors. I went on-line and researched that this issue was involved in a class action lawsuit Case ID #2:13-cv-00381. In this information, it was stated that, Honda knew about this problem with the door locks but avoided acknowledging the problem. It was also stated that this issue occurred after the limited 36,0000 mile warranty. It alleged that Honda avoided acknowledging the problem so they would not have to cover repairs. The lawsuit settled and Honda agreed to repair these affected vehicles free of charge. The warranty on these vehicles was also extended from 3 to 6 years or 6 months from the date the settlement was reached. Honda also agreed to reimburse owners who had already paid for this malfunction. When I purchased this vehicle from this Honda dealership, this issue was never mentioned to me. Now I am saddled with this problem and I paid to get this fixed out of my own pocket. I went to this dealership last week for a different recall, I spoke to the supervisor,, he said that he didn't know anything about this. He was very rude. Currently the front passenger door and the right back passenger door are still not working and it locks and you can't open it unless you push the driver side. If there was an accident, I wouldn't be able to open those doors.

On June 8th 2023 I brought my car into a Honda service center to be inspected per safety recall 23V-228. After inspection I was told that the rear frame was severely rusted out but that the shop could not do anything about it. I was given my vehicle back and told it was safe to drive and that Honda of America would be reaching out to me in a few days. Approximately 2 weeks passed with no word from Honda and the rear trailing arm fell off my car while driving home from work. This is exactly what the recall was supposed to prevent from happening. This was confirmed when the car was subsequently towed back into the shop. Now, Honda of America has been working on a repurchase offer that was supposed to take 2 weeks and it has since been nearly two months with no additional information. According to the recall, Honda was supposed to remedy this situation within 60 days of the car being brought in for initial inspection. As of today it has been 77 days. Honda refuses to answer any of my emails or pick up the phone with repeated attempts.

The contact owns a 2009 Honda CR-V. The contact received notification of NHTSA Campaign Number: 23V228000 (Structure) however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. Parts distribution disconnect.

The contact owns a 2009 Honda CR-V. The contact received notification of NHTSA Campaign Number: 23V228000 (Structure) however, the dealer advised the contact that the extent of the rust on the vehicle prevented the recall repair from being performed. The contact stated that the manufacturer made an offer to buy back the vehicle however, the contact believed that the offer was unreasonable. The manufacturer was made aware of the failure. The failure mileage was approximately 70,500. Parts distribution disconnect.