The Honda Accord LX is equipped with a seven inch audio infotainment screen that does not detect nor capable of having wifi. The car's computer will update through Bluetooth and/or tethering to my phone. After I set up my hondalink and free att wifi(which wifi is on my phone), I went to Honda dealer I bought from and another l…
Read full complaint
The Honda Accord LX is equipped with a seven inch audio infotainment screen that does not detect nor capable of having wifi. The car's computer will update through Bluetooth and/or tethering to my phone. After I set up my hondalink and free att wifi(which wifi is on my phone), I went to Honda dealer I bought from and another local technician to speak to them about my phone tethered settings being on no file transfer. At both locations I was told my car does not update through my phone, they looked for a wifi connection in my car, and then asked to see my phone. I thought a recent update had made my engine go to 4rpms without switching gears. I was told where I bought it at that this was not on my cars computer and it did not happen. I have contacted Honda Corp to be told the same that the car does not update through my phone. Hondalink has a locator and engine updates were applied to my car at 8pm on Friday night in my driveway. Bluetooth does not have enough strength to install engine updates.
NHTSA ODI #11525198
Mileage unknown · May 20, 2023
Electrical SystemEngine
On 5.20.23, performed required remote system update for 2023 Honda Accord EX (gas) with 3,410 miles on it. HondaLInk app indicated update was requested while car dashboard indicated the update was installed and complete. Immediately thereafter, the Check Engine Light went off (not blinking) and received following message: "Emi…
Read full complaint
On 5.20.23, performed required remote system update for 2023 Honda Accord EX (gas) with 3,410 miles on it. HondaLInk app indicated update was requested while car dashboard indicated the update was installed and complete. Immediately thereafter, the Check Engine Light went off (not blinking) and received following message: "Emissions system problem. Power may be reduced. See your dealer.". Habitual problem for Honda. I was forced to trade in a 2019 Accord Hybrid due to emissions problems causing blinking Check Engine Light with car computer NOT retaining error codes - see prior complaint to NHTSA - tracking #11521930.
Honda (American Honda Motor Co.) is recalling certain 2023 Honda Accord, Accord Hybrid, and 2024 HR-V, Pilot, and Acura Integra vehicles. The driver's seat cushion frame may not have been tightened properly, which can result in a loose seat. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 207, "Seating Systems."
Consequence & remedy
Consequence: A loose driver's seat may not adequately restrain the driver during a crash, increasing the risk of injury.
Remedy: Dealers will replace the driver's seat cushion frame, free of charge. Owner notification letters were mailed March 10, 2026. Owners may contact Honda's customer service at 1-888-234-2138. Honda's numbers for this recall are ONC, KND, BNE and ZNF. Vehicle Identification Numbers (VINs) involved in this recall will become searchable on NHTSA.gov beginning February 5, 2026. This recall expands previous NHTSA recall number 24V859.
Honda (American Honda Motor Co.) is recalling certain 2023-2024 Honda Accord, Accord Hybrid, Civic Sedan, Civic Hatchback, Pilot, and 2024 HR-V, Acura Integra and Acura Integra Type S vehicles. The driver's seat cushion frame may not have been tightened properly, which can result in an unsecured seat. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 207, "Seating Systems."
Consequence & remedy
Consequence: An unsecured driver's seat may not adequately restrain the driver during a crash, increasing the risk of injury.
Remedy: Dealers will replace the driver's seat cushion frame, free of charge. Owner notification letters were mailed January 6, 2025. Owners may contact Honda customer service at 1-888-234-2138.
Honda (American Honda Motor Co.) is recalling certain 2023-2024 Honda Accord, Accord Hybrid, 2023-2025 Honda CR-V Hybrid, and 2025 Honda Civic and Civic Hybrid vehicles. The high-pressure fuel pump may crack and leak fuel.
Consequence & remedy
Consequence: A fuel leak in the presence of an ignition source can increase the risk of a fire.
Remedy: Dealers will inspect and replace the high-pressure fuel pump as necessary, free of charge. Owner letters were mailed February 20, 2025. Owners may contact Honda customer service at 1-888-234-2138. Honda's number for this recall is PJW.
Honda (American Honda Motor Co.) is recalling certain 2013-2023 Honda Accord, Civic Coupe, Civic Sedan, Civic Hatchback, Civic Type R, CR-V, HR-V, Ridgeline, Odyssey, Acura ILX, MDX, MDX Hybrid, RDX, RLX, TLX, 2019-2022 Honda Insight, Passport, 2020 Honda CR-V Hybrid, 2018-2019 Honda Clarity PHEV, Fit, and 2015-2020 Honda Accord Hybrid, Pilot, Acura NSX vehicles. The fuel pump inside the fuel tank may fail.
Consequence & remedy
Consequence: Fuel pump failure can cause an engine stall while driving, increasing the risk of a crash.
Remedy: Dealers will replace the fuel pump module, free of charge. Owner letters were mailed September 6, 2024. Owners may contact Honda customer service at 1-888-234-2138. Honda's numbers for this recall are KGC and KGD. This recall is an expansion of NHTSA recall numbers 21V-215 and 20V-314.
Honda (American Honda Motor Co.) is recalling certain 2023-2024 Accord and HR-V vehicles. The front seat belt pretensioners may be missing the rivet that secures the quick connector and wire plate. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard numbers 208, "Occupant Crash Protection," 209, "Seat Belt Assembles," and 210, "Seat Belt Assembly Anchorages."
Consequence & remedy
Consequence: A seat belt pretensioner missing a rivet will not properly restrain the occupant, increasing the risk of injury during a crash.
Remedy: Dealers will inspect and replace the seat belt pretensioner assemblies as necessary, free of charge. Owner notification letters were mailed January 8, 2024. Owners may contact Honda customer service at 1-888-234-2138. Honda's numbers for this recall are MG7 and NG5.
Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗
NHTSA investigations
1
RQ24006 · Front Seat Belt Assemblies May Be Missing The Rivet That Secures The Quick Connector And Wire Plate
On April 4, 2024, the Office of Defects Investigations (ODI) opened RQ24006 to investigate American Honda Motor Co.’s (Honda’s) proposed remedy for recall 23V-782 as well as scope of the vehicles involved. Honda issued recall 23V-782 on November 21, 2023, which concerns certain model year (MY) 2023-2024 Honda Accord, Honda Accord Hybrid, and Honda HR-V vehicles. Recall 23V-782 states that the driver and front passenger seat belt pretensioner assemblies may have been manufactured without a rivet that secures the pretensioner quick connector and wire plate. Recall documentation states that seat belt pretensioner assemblies that are missing the rivet will not properly restrain the occupant in the event of a collision, increasing the risk of injury.Subject defective seat belt assemblies are installed as original equipment for both the driver and front passenger positions for the HR-V, but only for the driver position for the Accord and Accord Hybrid. The recall remedy for 23V-782 instructs the technician to inspect both front seat belt pretensioner assemblies and, if necessary, replace them. The inspection procedure requires the technician to utilize a pull force gauge to determine whether the subject component is missing the subject rivet and requires replacement. Parts requiring replacement are determined by whether the pretensioner quick connector separates from the pretensioner assembly while the technician is pulling on the seat belt. If no separation occurs, then the part is determined to be not defective and not require replacement. There have been no reports alleging a failure of seat belt pretensioner assemblies after the inspect and replace remedy for recall 23V-782 was performed. Additionally, no comparable failures have been observed in field data for similar vehicles outside of the scope of the recall. As of the 4th quarter of 2024, the recall completion rate is at approximately 84% of the total recalled population. In view of the lack of failures after the remedy for recall 23V-782 was performed, and the lack of failures in similar vehicles outside of the scope of the recall, ODI is closing this Recall Query (RQ). The Agency reserves the right to take additional action if warranted by future circumstances.
Additional source detail variants (2)
Seat Belts:front
On April 4, 2024, the Office of Defects Investigations (ODI) opened RQ24006 to investigate American Honda Motor Co.’s (Honda’s) proposed remedy for recall 23V-782 as well as scope of the vehicles involved. Honda issued recall 23V-782 on November 21, 2023, which concerns certain model year (MY) 2023-2024 Honda Accord, Honda Accord Hybrid, and Honda HR-V vehicles. Recall 23V-782 states that the driver and front passenger seat belt pretensioner assemblies may have been manufactured without a rivet that secures the pretensioner quick connector and wire plate. Recall documentation states that seat belt pretensioner assemblies that are missing the rivet will not properly restrain the occupant in the event of a collision, increasing the risk of injury.Subject defective seat belt assemblies are installed as original equipment for both the driver and front passenger positions for the HR-V, but only for the driver position for the Accord and Accord Hybrid. The recall remedy for 23V-782 instructs the technician to inspect both front seat belt pretensioner assemblies and, if necessary, replace them. The inspection procedure requires the technician to utilize a pull force gauge to determine whether the subject component is missing the subject rivet and requires replacement. Parts requiring replacement are determined by whether the pretensioner quick connector separates from the pretensioner assembly while the technician is pulling on the seat belt. If no separation occurs, then the part is determined to be not defective and not require replacement. There have been no reports alleging a failure of seat belt pretensioner assemblies after the inspect and replace remedy for recall 23V-782 was performed. Additionally, no comparable failures have been observed in field data for similar vehicles outside of the scope of the recall. As of the 4th quarter of 2024, the recall completion rate is at approximately 84% of the total recalled population. In view of the lack of failures after the remedy for recall 23V-782 was performed, and the lack of failures in similar vehicles outside of the scope of the recall, ODI is closing this Recall Query (RQ). The Agency reserves the right to take additional action if warranted by future circumstances.
Seat Belts
On April 4, 2024, the Office of Defects Investigations (ODI) opened RQ24006 to investigate American Honda Motor Co.’s (Honda’s) proposed remedy for recall 23V-782 as well as scope of the vehicles involved. Honda issued recall 23V-782 on November 21, 2023, which concerns certain model year (MY) 2023-2024 Honda Accord, Honda Accord Hybrid, and Honda HR-V vehicles. Recall 23V-782 states that the driver and front passenger seat belt pretensioner assemblies may have been manufactured without a rivet that secures the pretensioner quick connector and wire plate. Recall documentation states that seat belt pretensioner assemblies that are missing the rivet will not properly restrain the occupant in the event of a collision, increasing the risk of injury.Subject defective seat belt assemblies are installed as original equipment for both the driver and front passenger positions for the HR-V, but only for the driver position for the Accord and Accord Hybrid. The recall remedy for 23V-782 instructs the technician to inspect both front seat belt pretensioner assemblies and, if necessary, replace them. The inspection procedure requires the technician to utilize a pull force gauge to determine whether the subject component is missing the subject rivet and requires replacement. Parts requiring replacement are determined by whether the pretensioner quick connector separates from the pretensioner assembly while the technician is pulling on the seat belt. If no separation occurs, then the part is determined to be not defective and not require replacement. There have been no reports alleging a failure of seat belt pretensioner assemblies after the inspect and replace remedy for recall 23V-782 was performed. Additionally, no comparable failures have been observed in field data for similar vehicles outside of the scope of the recall. As of the 4th quarter of 2024, the recall completion rate is at approximately 84% of the total recalled population. In view of the lack of failures after the remedy for recall 23V-782 was performed, and the lack of failures in similar vehicles outside of the scope of the recall, ODI is closing this Recall Query (RQ). The Agency reserves the right to take additional action if warranted by future circumstances.
Illustration