2021 Grand Design Momentum

The contact owns a 2021 Grand Design Momentum. The contact stated that while the trailer was parked, the contact became aware that the axle on the trailer had become inoperable. The contact stated that the axle springs had detached, and the I-beam frame of the trailer was bent. The trailer was taken to an independent mechanic, where it was diagnosed and determined that the axle springs and the frame had failed and needed to be replaced. The trailer was not repaired. The dealer was contacted; however, the trailer was not diagnosed or repaired. The manufacturer was made aware of the failure. The approximate failure mileage was 8,000.

I am experiencing symptoms, consistent with excessive frame movement and structural failure in my 42 foot fifth wheel toy hauler RV. We have been monitoring this for the time we have owned it just over six weeks and have noticed an increase and symptoms that research shows indicate there is a problem.. we are seeking professional inspection and guidance to establish the scope of it and hopefully catching it at the earlier side in order to hopefully deal with the issue easier than after a total failure. The symptoms include 1- the interior upper section horizontal lag bolts that hold the camper walls to the frame all had come loose completely. There were four on one side and five on the other. 2- the underside curved fillon panel by the pin box is ripple and curved, and shows movement 3- the left and right sides of the camper towards the front are becoming out of square with the rest of the camper and the seals around the doors are showing larger gaps and looking more out of square 4- interior doors and exterior doors of the camper are all experiencing difficulty latching and are becoming out of square to the original structure 5- there is a changing of the distance, measurements both in height, and in relation to the lower frame members from the pin box where the camper tows from. And what appears to be some twisting out of square. 6- front panel door is buckling in the center and will no longer close geometry of the opening has been compromised It is clear that we are experiencing frame structural failure between the area where the camper toast from in relation to the main frame of the camper

We purchased our 2021 Grand Design 395M Momentum new in early 2021. Over the past year we noticed cabinets on the passenger side bedroom separating from there wood frames. We initially repaired the cabinets ourselves thinking it was just poor workmanship. This last trip from Houston to Myrtle Beach the cabinets again separated. Someone in the campground at Myrtle Beach informed us about the issue with Grand Design's frames. Upon closer inspection I noticed that the bottom of the cap had separated approximately 1" and when you lower the unit onto the 5th wheel hitch the pin box sinks an additional 1.5". It appeared sever enough that we were uncomfortable towing the unit back to Houston. We secured an enclosed trailer (at our expense) for our items and left the unit in storage (at our expense) until we could contact Grand Design. We contacted Grand Design and are scheduling our unit to be towed to a local Myrtle Beach dealer for repair. In my opinion if we would have attempted to tow the trailer it could have broken loose and collapsed on to our truck or broke free entirely. At a minimum I do believe a letter notifying owners of the issues is warranted and what repairs/changes are being made. It is only a matter of time before there is a catastrophic event with sever injury or death.

I am experiencing upper deck frame flex which our manufacturer has unsuccessfully attempted to repair twice (Nov 2021 and Oct 2024). The manufacturer refuses to accept responsibility for our safety concerns and has ceased all remaining repair attempts which was communicated to us through emails. This excessive flex causes my cargo doors to open while traveling, damage to the supporting frame structures (frame cracks throughout), and the attaching king pin that no longer supports the weight of our RV as evidenced by the 1 inch drop when hooking our RV up to the tow vehicle. Multiple repair attempts have been made by the manufacture at the manufacturer's facilities however, each attempt has failed and is simply weakening the already weakened frame. The manufacturer has extended the warranty to its consumer base however, my contention is this is merely "optics" given their refusal to apply a "permanent" fix to our RV that IS currently under their extended warranty.

After a trip we noticed that when we had the rv connected to the truck, the front closet would not close. There was also cracking on the nose cover of the rv. We (my wife and I) had a problem with the cargo doors and entry doors coming open on other trips and lost stuff on the highway so we talked to the rv dealer to get a frame inspection. what was found was that the frame was broke in a few places and the door side wall of the camper was not attached. We have also had the rear spring hanger break the year before while driving almost pulling me out of the lane I was traveling in. The camper is sitting at the dealers now because it cannot be towed, and the dealer will not weld the frame due to liability. missing and broken bolts in the frame and body were also discovered.

The frame and suspension on our 2021 Grand Design is failing. The frame on the upper deck has broken welds and there is visible movement in the upper deck when hitching and unhitching. The furniture inside the main bedroom move when hitching and unhitching. The side walls have started to detach from the frame as evidenced by screws backing out or breaking. The suspension has bent components. The frame is also bending in the right front. The hitch visibly moves into the upper deck when hitching.

Our 2021 Grand Design 395ms has FRAME FAILURE. The upper body of the frame has multiple broken welds and has separated during road use. If the welds continue to fail I have been told the lower half of the 5th wheel will fall to the pavement. If this were to occur during travel it could be catastrophic. This issue was iniitally repaired in thermopolis by a mobile welder. This initial repair failed and we had to contact the manufacturer. They initially told us it would be a couple months before their SRT team could repair. After multiple days we were connected with another mobile repair man from Montana Mobile Repair (Shawn) who stated "This is the worst frame repair he has had to make". After many hours he added extra bracing and support. Grand Design stated we needed to get it home. Approx. 1700 miles back to Michigan and we would need to setup an appointment for service repair. We are concerned with the fact that they are requiring owners to drive such defective units so far and putting the owners and others in harms way. We had no choice but to make the drive. We were denied any other forms of help such as flying the family home or paying for the extended stay until SRT arrived on site for the repair. Our final communication says once we arrive in Michigan to contact Grand Design and they will send someone to pick up our rig and transport it Grand Design.