IllustrationWhen I am driving in town I have an indication message that comes up and says engine power reduced
2009 GMC Sierra 2500
Owner reports · Recalls · Investigations
Similar to other model years
Owner complaints for the 2009 GMC Sierra 2500 do not stand out strongly from the model-year median of 46.
About this comparison →How this year compares
Owner complaints by model year
Compare all Sierra 2500 years →Counts vary with age, sales and reporting. They are not failure rates.
What owners reported most
All reported categories
Tap a category to read its complaints. One report may name several components.
When problems were reported
Mileage at the reported incident
90–25K
825–50K
350–75K
475–100K
3100–150K
1150K+
28 reports with mileage · 3 unknown
NHTSA’s mileage field refers to the reported incident, not necessarily the filing date. This shows report counts, not the likelihood of a failure.
What to inspect
Issues worth paying extra attention to based on owner reports.
- Electrical System. Review the 7 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
- Air Bags. Review the 5 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
- Structure. Review the 4 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
NHTSA owner reports · September 18, 2026 snapshot.
1 crash reports0 fire reports0 injury reports
Electrical System complaints
7 reportsRECEIVING A "SERVICE TRAILER BRAKE SYSTEM" MESSAGE WHILE IN MOTION ON BOTH HIGHWAY AND CITY STREETS WHEN APPLYING BRAKES BOTH WITH AND WITHOUT TOW\HAUL MODE ENGAGED. THERE IS A RECALL NOTICE #14515 ON THIS VEHICLE AND THE NHTSA SITE SAYS THAT ALL RECALLS HAVE BEEN PERFORMED. WHAT AM I TO DO?
THE DOOR LOCK ACTUATOR ON THE DRIVER'S DOOR WILL NOT WORK OR ONLY PARTIALLY WORK AT TIMES. SOMETIMES IT WORKS, SOMETIMES IT DOES NOT WORK AND SOME TIMES IT HALF ENGAGES SO THE DOOR CAN BE HALF WAY OPENED, BUT THE LATCH IS STILL ENGAGED SO IT CANNOT BE OPENED ALL THE WAY. MY CONCERN IS THAT THE DOOR WILL NOT BE LOCKED WHEN I TH…
Read full complaint
THE DOOR LOCK ACTUATOR ON THE DRIVER'S DOOR WILL NOT WORK OR ONLY PARTIALLY WORK AT TIMES. SOMETIMES IT WORKS, SOMETIMES IT DOES NOT WORK AND SOME TIMES IT HALF ENGAGES SO THE DOOR CAN BE HALF WAY OPENED, BUT THE LATCH IS STILL ENGAGED SO IT CANNOT BE OPENED ALL THE WAY. MY CONCERN IS THAT THE DOOR WILL NOT BE LOCKED WHEN I THINK IT IS IF I DEPEND ON THE ELECTRIC LOCK. IT DOESN'T MATTER IF I USE THE KEYLESS ENTRY OR THE ELECTRIC BUTTON ON THE INTERIOR IF IT'S NOT WORKING, NEITHER OPERATE THE LOCK. I AM CONCERNED ABOUT THEFT OF PERSONAL BELONGINGS, OR WORSE, MY ENTIRE VEHICLE IF THE ACTUATOR DOES NOT LOCK THE DOOR AS INTENDED. IF THE ELECTRONIC PORTION DOESN'T WORK AND I HAVE LEFT THE VEHICLE RUNNING WHILE LOCKED, I MUST USE THE KEYLESS ENTRY TO UNLOCK THE OTHER DOORS AND ENTER THE VEHICLE VIA ANOTHER DOOR AND REACH OVER TO MANUALLY UNLOCK MY DRIVER DOOR. ANOTHER CONCERN IS THAT THE OTHERS WILL STOP WORKING AS THE DRIVER DOOR HAS AND I WILL NOT BE ABLE TO GET INTO MY VEHICLE. THESE SCENARIOS HAVE PRESENTED THEMSELVES AFTER THE VEHICLE HAS BEEN SITTING, AFTER A SHORT OR LONG DRIVE AS WELL. THERE DOESN'T SEEM TO BE ANY TIME THAT YOU ARE SAFE FROM IT NOT OCCURRING.
IGNITION SWITCH FAILED INTERNALLY WHEN ATTEMPTING TO START THE VEHICLE. SWITCH WILL NOT ROTATE TO THE START POSITION. STEERING WHEEL LOCK IS NOT ENGAGING (FAILED). IGNITION TONE NOTIFYING THAT THE KEY IS IN THE IGNITION IS NO LONGER WORKING (WAS INITIALLY).
AT APPROXIMATELY 65,000 MILES THE PASSENGER SIDE DOOR LOCK ACTUATOR QUIT WORKING. THE LOCK DOES NOT OPERATE WITH THE AUTOMATIC DOOR LOCK ON THE DRIVER SIDE DOOR LOCK FUNCTION OR THE KEYPAD. AT APPROXIMATELY 110,000 MILES THE REAR DRIVER SIDE DOOR LOCK ACTUATOR ALSO QUIT WORKING. THIS IS A HIGHLY UNSAFE SITUATION ON MANY SCALE…
Read full complaint
AT APPROXIMATELY 65,000 MILES THE PASSENGER SIDE DOOR LOCK ACTUATOR QUIT WORKING. THE LOCK DOES NOT OPERATE WITH THE AUTOMATIC DOOR LOCK ON THE DRIVER SIDE DOOR LOCK FUNCTION OR THE KEYPAD. AT APPROXIMATELY 110,000 MILES THE REAR DRIVER SIDE DOOR LOCK ACTUATOR ALSO QUIT WORKING. THIS IS A HIGHLY UNSAFE SITUATION ON MANY SCALES ESPECIALLY SINCE THERE ARE NO KEYHOLES ON THOSE DOORS. *TR
I HAVE A 2009 GMC SIERRA 2500 WITH 70,000 MILES. AT 39,200 MILES, THE ACTUATOR ON THE FRONT DRIVERS SIDE DOOR LOCK FAILED. THEN AT ABOUT 46,000 MILES THE ACTUATOR ON THE REAR DRIVERS SIDE DOOR LOCK FAILED. MY DOOR LOCKS NO LONGER AUTOMATICALLY LOCK AND UNLOCK WHICH CREATES A SAFETY HAZARD, PARTICULARLY IN THE CASE OF THE REAR…
Read full complaint
I HAVE A 2009 GMC SIERRA 2500 WITH 70,000 MILES. AT 39,200 MILES, THE ACTUATOR ON THE FRONT DRIVERS SIDE DOOR LOCK FAILED. THEN AT ABOUT 46,000 MILES THE ACTUATOR ON THE REAR DRIVERS SIDE DOOR LOCK FAILED. MY DOOR LOCKS NO LONGER AUTOMATICALLY LOCK AND UNLOCK WHICH CREATES A SAFETY HAZARD, PARTICULARLY IN THE CASE OF THE REAR DOOR LOCK BECAUSE IT CANNOT BE LOCKED OR UNLOCKED BY THE DRIVER WITHOUT EXITING THE VEHICLE AND CRAWLING THROUGH FROM THE PASSENGER SIDE. IF YOU DON'T MANUALLY LOCK THE REAR DOOR, A YOUNG CHILD COULD OPEN THE UNLOCKED DOOR WHILE THE VEHICLE IS IN MOTION; BUT IF YOU MANUALLY LOCK THE REAR DOOR, YOU CANNOT GET A CHILD OUT QUICKLY IN THE EVENT OF AN ACCIDENT BECAUSE IT IS IMPOSSIBLE TO ACCESS THE LOCK WITHOUT CRAWLING THROUGH FROM THE PASSENGER SIDE. DOOR LOCK ACTUATOR FAILURES SEEM TO BE A COMMON PROBLEM ON 2009 GENERAL MOTORS TRUCKS. MY FATHER ALSO HAS A 2009 GMC SIERRA 2500, AND ONE OF THE FRONT DOOR LOCK ACTUATORS FAILED ON IT. I HAD A 2009 CHEVROLET SILVERADO 3500 TRUCK FOR USE BY MY STAFF AND ONE OF THE REAR DOOR LOCK ACTUATORS FAILED ON IT. A FRIEND HAS A 2009 CHEVROLET SILVERADO 1500, AND ONE FRONT AND ONE REAR DOOR LOCK ACTUATOR FAILED ON HIS VEHICLE. AND, A GOOGLE SEARCH LED ME TO MANY POSTINGS AND COMPLAINTS RELATED TO DOOR LOCK ACTUATOR FAILURES ON 2009 GENERAL MOTORS TRUCKS AND SUVS. I HAVE BEEN UNABLE TO CONVINCE MY GM DEALER TO CORRECT THIS DEFECT - THEIR ESTIMATED COST TO REPLACE THE TWO ACTUATORS IS APPROXIMATELY $800.00 WHICH I SIMPLY CANNOT AFFORD TO PAY. *TR
I HAVE A 2009 GMC SIERRA 2500 WITH 39,200 MILES. MY DOOR LOCK ACTUATOR QUIT WORKING, SO MY DOOR NO LONGER AUTOMATICALLY LOCKS AND UNLOCKS WHICH I CONSIDER TO BE A SAFETY HAZARD. I NOTED ON-LINE THAT THIS SEEMS TO BE A VERY COMMON PROBLEM IN GMC TRUCKS, TAHOES, AND SUBURBANS - AND I EVEN HAVE FRIENDS AND FAMILY MEMBERS THAT HAV…
Read full complaint
I HAVE A 2009 GMC SIERRA 2500 WITH 39,200 MILES. MY DOOR LOCK ACTUATOR QUIT WORKING, SO MY DOOR NO LONGER AUTOMATICALLY LOCKS AND UNLOCKS WHICH I CONSIDER TO BE A SAFETY HAZARD. I NOTED ON-LINE THAT THIS SEEMS TO BE A VERY COMMON PROBLEM IN GMC TRUCKS, TAHOES, AND SUBURBANS - AND I EVEN HAVE FRIENDS AND FAMILY MEMBERS THAT HAVE HAD THE VERY SAME PROBLEM WITH THEIR GM TRUCKS. BECAUSE THIS IS SO VERY COMMON, AND TO ME IS A SAFETY ISSUE, IT SEEMS LIKE GM SHOULD BE ADDRESSING THIS. I INQUIRED WITH THE DEALER, AND THE COST FOR A SINGLE DOOR LOCK IS WELL OVER $200. BASED ON WHAT I'VE BEEN READING, I CAN EXPECT THE REMAINING LOCKS TO GO OUT OVER TIME. I RESPECTFULLY REQUEST THAT NHTSA LOOK INTO THIS MATTER AS I BELIEVE IT IS AFFECTING MANY OTHERS AND IS A SAFETY HAZARD. *TR
Official recalls
521V050000 · Air Bags:frontal:passenger Side:inflator Module
Feb 5, 2021
General Motors, LLC (GM) is recalling certain 2007-2011 Cadillac Escalade, Escalade ESV, Escalade EXT, Chevrolet Avalanche, Silverado 1500, Suburban, Tahoe, GMC Sierra 1500, Yukon, Yukon XL, and 2009-2011 Chevrolet Silverado 2500, Silverado 3500, GMC Sierra 2500 and Sierra 3500 vehicles originally sold, or ever registered, in the states of Alabama, California, Florida, Georgia, Hawaii, Louisiana, Mississippi, South Carolina, Texas, Puerto Rico, American Samoa, Guam, the Northern Mariana Islands (Saipan), and the U.S. Virgin Islands or "Zone A." Additionally, GM is recalling certain 2007-2008 Cadillac Escalade, Escalade ESV, Escalade EXT, Chevrolet Avalanche, Silverado 1500, Suburban, Tahoe, GMC Sierra 1500, Yukon, Yukon XL vehicles originally sold, or ever registered, in the states of Arizona, Arkansas, Delaware, District of Columbia, Illinois, Indiana, Kansas, Kentucky, Maryland, Missouri, Nebraska, Nevada, New Jersey, New Mexico, North Carolina, Ohio, Oklahoma, Pennsylvania, Tennessee, Virginia, and West Virginia or "Zone B." These vehicles are equipped with non-desiccated passenger frontal inflators containing phase-stabilized ammonium nitrate (PSAN) propellant. These inflators may explode due to propellant degradation occurring after long-term exposure to high absolute humidity, high temperatures, and high temperature cycling.
Consequence & remedy
Consequence: An inflator explosion may result in sharp metal fragments striking the driver or other occupants, resulting in serious injury or death.
Remedy: GM will notify owners, and dealers will replace the front passenger air bag inflator with an alternate one, free of charge. Interim letters notifying owners of the safety risk were mailed on February 22, 2021. Second notification letters will be mailed once the remedy is available. Owner notification letters were mailed on March 1, 2021. Owners may contact Chevrolet customer service at 1-800-222-1020; Cadillac customer service at 1-800-458-8006; and GMC customer service at 1-800-462-8782. GM's number for this recall is N212328760.
21V052000 · Air Bags:frontal:passenger Side:inflator Module
Feb 5, 2021
General Motors, LLC (GM) is recalling certain 2009 Cadillac Escalade, Escalade ESV, Escalade EXT, Chevrolet Avalanche, Silverado 1500, Silverado 2500, Silverado 3500, Suburban, Tahoe, GMC Sierra 1500, Sierra 2500, Sierra 3500, Yukon, and Yukon XL vehicles originally sold, or ever registered, in the states of Arizona, Arkansas, Delaware, District of Columbia, Illinois, Indiana, Kansas, Kentucky, Maryland, Missouri, Nebraska, Nevada, New Jersey, New Mexico, North Carolina, Ohio, Oklahoma, Pennsylvania, Tennessee, Virginia, and West Virginia or "Zone B." Additionally, GM is recalling certain 2007-2008 Cadillac Escalade, Escalade ESV, and Escalade EXT, Chevrolet Avalanche, Silverado 1500, Suburban, Tahoe, GMC Sierra 1500, Yukon, and Yukon XL vehicles originally sold, or ever registered, in the states of Alaska, Colorado, Connecticut, Idaho, Iowa, Maine, Massachusetts, Michigan, Minnesota, Montana, New Hampshire, New York, North Dakota, Oregon, Rhode Island, South Dakota, Utah, Vermont, Washington, Wisconsin, and Wyoming or "Zone C." These vehicles are equipped with non-desiccated passenger frontal inflators containing phase-stabilized ammonium nitrate (PSAN) propellant. These inflators may explode due to propellant degradation occurring after long-term exposure to high absolute humidity, high temperatures, and high temperature cycling.
Consequence & remedy
Consequence: An inflator explosion may result in sharp metal fragments striking the driver or other occupants, resulting in serious injury or death.
Remedy: GM will notify owners, and dealers will replace the front passenger air bag inflator with an alternate one, free of charge. Interim letters notifying owners of the safety risk were mailed on February 23, 2021. Second notification letters will be mailed once the remedy is available. Owner notification letters were mailed on September 20, 2021. Owners may contact Chevrolet customer service at 1-800-222-1020, Cadillac customer service at 1-800-458-8006, and GMC customer service at 1-800-462-8782. GM's number for this recall is N212328780.
21V053000 · Air Bags:frontal:passenger Side:inflator Module
Feb 5, 2021
General Motors, LLC (GM) is recalling certain 2013 Cadillac Escalade, Escalade ESV, and Escalade EXT, Chevrolet Avalanche, Silverado 1500, Silverado 2500/3500, Suburban, Tahoe, GMC Sierra 1500, Sierra 2500/3500, Yukon, and Yukon XL vehicles originally sold, or ever registered, in the states of Alabama, California, Florida, Georgia, Hawaii, Louisiana, Mississippi, South Carolina, Texas, Puerto Rico, American Samoa, Guam, the Northern Mariana Islands (Saipan), and the U.S. Virgin Islands or "Zone A." Additionally, GM is recalling certain 2010 Cadillac Escalade, Escalade ESV, and Escalade EXT, Chevrolet Avalanche, Silverado 1500, Silverado 2500/3500, Suburban, Tahoe, GMC Sierra 1500, Sierra 2500/3500, Yukon, and Yukon XL vehicles originally sold, or ever registered in the states of Arizona, Arkansas, Delaware, District of Columbia, Illinois, Indiana, Kansas, Kentucky, Maryland, Missouri, Nebraska, Nevada, New Jersey, New Mexico, North Carolina, Ohio, Oklahoma, Pennsylvania, Tennessee, Virginia, and West Virginia or "Zone B." Additionally, GM is recalling certain 2009 Cadillac Escalade, Escalade ESV, and Escalade EXT, Chevrolet Avalanche, Silverado 1500, Silverado 2500/3500, Suburban, Tahoe, GMC Sierra 1500, Sierra 2500/3500, Yukon, and Yukon XL vehicles originally sold, or ever registered, in the states of Alaska, Colorado, Connecticut, Idaho, Iowa, Maine, Massachusetts, Michigan, Minnesota, Montana, New Hampshire, New York, North Dakota, Oregon, Rhode Island, South Dakota, Utah, Vermont, Washington, Wisconsin, and Wyoming or "Zone C."
Consequence & remedy
Consequence: An inflator explosion may result in sharp metal fragments striking the driver or other occupants, resulting in serious injury or death.
Remedy: GM will notify owners, and dealers will replace the front passenger air bag inflator with an alternate one, free of charge. Interim letters notifying owners of the safety risk were mailed on February 24, 2021. Second notification letters will be mailed once the remedy is available. Owner notification letters were mailed on May 11, 2021. Owners may contact Cadillac customer service at 1-800-458-8006; Chevrolet customer service at 1-800-222-1020; and GMC customer service at 1-800-462-8782. GM's number for this recall is N212328790.
18V267000 · Equipment
Apr 26, 2018
General Motors LLC (GM) is recalling certain 2009-2014 Chevrolet Silverado HD and GMC Sierra HD, 2009 GMC Topkick 5000, 6000, 7000 and 8000 Series and Isuzu F Series, and 2009-2018 Chevrolet Express, and GMC Savana vehicles, equipped with certain Plastic-Handle Fire Extinguishers or Push Button 'Pindicator' Fire Extinguishers. These extinguishers may become clogged, preventing the extinguisher from discharging as expected or requiring excessive force to activate the extinguisher. Additionally, in certain models, the nozzle may detach from the valve assembly with enough force that it could cause injury and also render the product inoperable. For a full list of the affected fire extinguisher models visit: https://static.nhtsa.gov/odi/rcl/2017/RMISC-17E062-5427.pdf
Consequence & remedy
Consequence: In the event of a fire, if the fire extinguisher does not function properly, it can increase the risk of injury.
Remedy: GM will notify owners, instructing them to contact Kidde to get a replacement fire extinguisher, free of charge. The recall began June 11, 2018. Owners may contact Chevrolet customer service at 1-800-222-1020, GMC customer service at 1-800-462-8782, and Isuzu customer service at 1-866-441-9638. GM's number for this recall is 18146.
14V407000 · Electrical System
Jul 2, 2014
General Motors LLC (GM) is recalling certain model year 2007-2011 Chevrolet Silverado HD 2500/3500 trucks manufactured January 18, 2007, to June 22, 2011, and GMC Sierra HD 2500/3500 trucks manufactured January 22, 2007, to June 21, 2011, and equipped with an auxiliary battery. Owners may unknowingly draw too much current through the vehicle's trailer harness resulting in the melting of fusible link for the auxiliary battery.
Consequence & remedy
Consequence: If the fusible link melts it may come into contact with adjacent components, damage the electrical center cover, the nearby wiring harness conduit and other vehicle components, increasing the risk of a fire.
Remedy: GM will notify owners and dealers will replace the jumper harness with one that includes a 40 amp inline fuse, and provide the owner with supplemental Owner Manual information, free of charge. The recall began on August 29, 2014. Owners may contact Chevrolet customer service at 1-800-222-1020 or GMC customer service at 1-800-462-8782. GM's number for this recall is 14260.
Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗
NHTSA investigations
1EA21002 · Desiccated Air Bag Inflator Rupture
Opened Sep 17, 2021 · No close date supplied
Status: open (inferred from source dates) · Air Bags:frontal:driver Side:inflator Module; Air Bags:frontal:passenger Side:inflator Module
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.
Additional source detail variants (2)
Air Bags:frontal:driver Side:inflator Module
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.
Air Bags:frontal:passenger Side:inflator Module
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.