2005 GMC Sierra 2500

TL* THE CONTACT OWNS A 2005 GMC SIERRA 3500. THE CONTACT STATED THAT WHILE DRIVING 40 MPH, THE BRAKES WERE ENGAGED AND THE VEHICLE FAILED TO STOP. THE CONTACT MENTIONED THAT HE HAD TO ENGAGE THE EMERGENCY BRAKE IN ORDER FOR THE VEHICLE TO STOP. ALSO, THE CONTACT STATED THAT AFTER INSPECTING THE VEHICLE HE NOTICED OIL LEAKING. THE VEHICLE WAS NOT TAKEN TO THE DEALER. THE VEHICLE WAS TAKEN TO AN INDEPENDENT MECHANIC WHO DIAGNOSED THAT THE BRAKE LINES NEEDED TO BE REPLACED. THE MANUFACTURER WAS MADE AWARE OF THE FAILURE WHO DID NOT OFFER ANY ASSISTANCE. THE FAILURE AND CURRENT MILEAGE WAS 42,000. UPDATED 10/24/12 *CN UPDATED 11/08/12

TL* THE CONTACT OWNS A 2003 GMC SIERRA 2500 HD. THE CONTACT STATED THAT THE POWER STEERING WOULD SEIZE AND THE VEHICLE WOULD HESITATE TO STOP WHEN THE BRAKES WERE DEPRESSED. IN ADDITION, THE TRANSMISSION, WINDSHIELD WIPERS, CRUISE CONTROL, AND THE INSTRUMENT CLUSTER FAILED. THE VEHICLE WAS TAKEN TO THE DEALER WHO REPLACED THE TRANSMISSION, BUT THE FAILURE RECURRED. THE MANUFACTURER WAS NOTIFIED OF THE FAILURES, BUT DENIED ANY ASSISTANCE WITH REPAIRS TO THE VEHICLE. THE VEHICLE WAS NOT FURTHER REPAIRED. THE FAILURE MILEAGE WAS 29 AND THE CURRENT MILEAGE WAS 100,000.

MAJOR RUST OF THE UNDERCARRIAGE OF MY 2005 GMC SIERRA 78,000 MILES. SO FAR HAD TO REPLACE BRAKE ROTORS, BRAKE LINES , FUEL RADIATOR AND LINES. FRAME AND CROSS MEMBERS AS WELL AS CONTROL ARMS ARE ALL RUSTED. MADE COMPLAINT WITH GMC THEY HAD ME BRING TO A DEALER TO TELL ME THIS IS NORMAL RUSTING. TWO OF MY RELATIVES HAVE THE SAME YEAR TRUCK BUT ARE NOT EXPERIENCING THIS ISSUE AND WE ALL LIVE IN THE SAME AREA DRIVE SAME ROADS. *KB

TL* THE CONTACT OWNS A 2005 GMC SIERRA 3500HD. THE CONTACT STATED WHILE AT A COMPLETE STOP WITH THE BRAKE PEDAL ENGAGED, THE VEHICLE BEGAN TO LUNGE FORWARD; FOLLOWED BY THE ILLUMINATION OF THE ABS WARNING LIGHT AND A CHIME SOUNDING INSIDE THE VEHICLE INTERMITTENTLY. THE VEHICLE WAS TAKEN TO AN AUTHORIZED DEALER WHO STATED BOTH FRONT BRAKE HUBS AND SENSORS WOULD NEED TO BE REPLACED; HOWEVER THE PARTS WERE NOT INCLUDED IN THE EXTENDED SERVICE WARRANTY. THE VEHICLE WAS NOT REPAIRED AND THE MANUFACTURER WAS MADE AWARE OF THE DEFECT. THE APPROXIMATE FAILURE MILEAGE WAS 40,000. UPDATED 9/13/11 *CN THE CONSUMER STATED THE ABS LIGHT CHIMED. UDPATED 01/03/12

TL*THE CONTACT OWNS A 2005 GMC SIERRA 2500 HD DIESEL. THE CONTACT STATED THAT ON APRIL 19, 2010 WHEN PULLING OUT OF THE GARAGE AT 2 MPH, THE BRAKES AND STEERING SUDDENLY STOPPED FUNCTION. THERE WERE NO WARNING LIGHTS ILLUMINATED THAT INDICATED THE CAUSE OF THE FAILURE. WHEN THE CONTACT TURNED OFF THE VEHICLE AND RESTARTED IT, THE VEHICLE SUDDENLY ACCELERATED. THE CONTACT DEPRESSED THE EMERGENCY BRAKE PEDAL AND THE VEHICLE STOPPED; IT WAS TOWED TO AN AUTHORIZED DEALERSHIP WHERE IT WAS BEING REPAIRED AT THE TIME OF THE COMPLAINT. THE CONTACT WAS INFORMED THAT HIS VEHICLE WAS NOT INCLUDED IN ANY RELATED RECALLS. THE CURRENT AND FAILURE MILEAGES WERE APPROXIMATELY 38,000. UPDATED 11/11/10 *BF THE CONSUMER STATED HE EXPERIENCED A HYDRO BOOST FAILURE. AS HE WAS PULLING OUT OF THE GARAGE, THE STEERING AND BRAKING MECHANISMS MALFUNCTIONED. UPDATED 11/18/10

TL*THE CONTACT OWNS A 2005 GMC SIERRA 2500HD. THE CONTACT STATED THT THE VEHICLE LUNGED TEN FEET WHEN HE DEPRESSED THE BRAKE PEDAL UPON COMING TO A STOP SIGN. EXTRA EFFORT WAS REQUIRED TO STOP WHICH INCREASED THE STOPPING DISTANCE. THE ABS FUSE WAS REMOVED BASED ON ADVICE BY A MECHANIC. AFTER REMOVAL OF THE FUSE, THE PROBLEM STOPPED; WHEN THE FUSE WAS REINSTALLED, THE PROBLEM RETURNED. THE VEHICLE WAS TKANE TO AN AUTHORIZED DEALERSHIP WHO INFORMED HIM THAT THE BRAKES WERE FUNCTIONING NORMALLY. THE VIN WAS UNAVAILABLE AT THE TIME OF THE COMPLAINT.

FOR ALMOST A YEAR NOW THE BRAKES "DROP OUT" OR ESSENTIALLY QUIT SLOWING THE TRUCK BELOW 10 MPH. EXTRA EFFORT IS REQUIRED TO STOP. THIS HAS CAUSED NUMEROUS NEAR MISS REAR END COLLISIONS. WHEN TOWING AN 8000 POUND TRAILER THIS IS A SIGNIFICANT SAFETY HAZARD. I REMOVED THE ABS BRAKE FUSE ON THE ADVICE OF A TECH AND THE PROBLEM STOPPED IMMEDIATELY. WITH THE FUSE REINSTALLED THE PROBLEM RETURNS. *TR

2005 GMC SIERRA K2500 PICKUP TRUCK. PROBLEM - BRAKES FADE WHEN COMING TO A COMPLETE STOP. BRAKES WORK FINE UNTIL VEHICLE SLOWS TO 5-10MPH AT WHICH TIME BRAKE PEDAL LOSES PRESSURE - UNEXPECTEDLY INCREASES STOPPING DISTANCE BY 10-15 FEET CREATING HAZARDOUS CONDITION. ATTEMPTED RESOLUTION - REPLACED ALL FOUR BRAKE ROTORS AND PADS AT OWN EXPENSE. PROBLEM STILL EXISTS. WENT TO DEALERAND DISCOVERED THAT THIS IS APPARENTLY A COMMON PROBLEM RELATED TO THE ANTI-LOCK BRAKE SENSORS LOCATED IN EACH WHEEL ASSEMBLY. THEY CLAIM THIS BRAKING SYSTEM FAILURE IS DUE TO NORMAL WEAR AND TEAR AND NOT A MANUFACTURERS DEFECT OR FAULTY DESIGN... MY PROBLEM IS THIS - IF THE DEALER (AND, BY EXTENSION, THE MANUFACTURER) KNOWS THAT THE BRAKE SYSTEM IS GOING TO START FAILING AFTER A FEW YEARS OF OPERATION, THEN HOW IS THIS DUE TO NORMAL WEAR AND TEAR AND NOT A DESIGN DEFECT??? THIS IS CLEARLY AN EXAMPLE OF A MANUFACTURER PUTTING OUT A PRODUCT THAT THEY KNOW WILL FAIL IN TIME AND, THUS, CREATE A HAZARDOUS SAFETY CONDITION. *TR