← New search

2013 GMC Sierra 1500

Owner reports · Recalls · Investigations

Similar to other model years

Owner complaints for the 2013 GMC Sierra 1500 do not stand out strongly from the model-year median of 181.

About this comparison →

How this year compares

Owner complaints by model year

Compare all Sierra 1500 years →

Counts vary with age, sales and reporting. They are not failure rates.

What owners reported most

All reported categories

Tap a category to read its complaints. One report may name several components.

When problems were reported

Mileage at the reported incident

67 reports with mileage · 48 unknown

NHTSA’s mileage field refers to the reported incident, not necessarily the filing date. This shows report counts, not the likelihood of a failure.

What to inspect

Issues worth paying extra attention to based on owner reports.

  • Air Bags. Review the 35 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
  • Structure. Review the 25 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
  • Suspension. Review the 10 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →

NHTSA owner reports · September 18, 2026 snapshot.

2 crash reports1 fire reports3 injury reports

Unknown Or Other complaints

42 reports
Clear category filter
103,000 miles · Jan 7, 2019
Unknown Or Other

MY DASHBOARD IS CRACKING/CRACKED ON MY 2013 GMC SIERRA. GETTING WORSE AND WORSE. I HAVE NOTICED SIMILAR COMPLAINTS ONLINE. A LOT OF THEM. LOOKS TO ME LIKE A MANUFACTURER DEFECT. THEREFORE, I AM FILING THIS COMPLAINT

NHTSA ODI #11164889

70,000 miles · Dec 14, 2018
Air BagsUnknown Or Other

THE DASHBOARD HAS SEVERE CRACKS IN FRONT OF THE DRIVER ABOVE THE INSTRUMENT PANEL AND ALSO AROUND THE PASSENGER AIRBAG. THESE CRACKS ARE RESULTING FROM A POOR DESIGN AND NOT FROM ANY ACCIDENT OR MISUSE. THIS IS A WELL KNOWN ISSUE WITH THIS VINTAGE OF TRUCK AND HAS AFFECTED MANY OWNERS. THIS IS A SAFETY CONCERN BECAUSE IN THE …

Read full complaint

THE DASHBOARD HAS SEVERE CRACKS IN FRONT OF THE DRIVER ABOVE THE INSTRUMENT PANEL AND ALSO AROUND THE PASSENGER AIRBAG. THESE CRACKS ARE RESULTING FROM A POOR DESIGN AND NOT FROM ANY ACCIDENT OR MISUSE. THIS IS A WELL KNOWN ISSUE WITH THIS VINTAGE OF TRUCK AND HAS AFFECTED MANY OWNERS. THIS IS A SAFETY CONCERN BECAUSE IN THE EVENT OF A ACCIDENT THAT DEPLOYS THE AIRBAGS, THE MANUFACTURERS DEFECTIVE DASHBOARD WOULD SHATTER AND YIELD PROJECTILES WITHIN THE CABIN AREA. THE DASH REQUIRES FULL REPLACEMENT AND CANNOT BE REPAIRED.

NHTSA ODI #11161397

75,000 miles · Nov 19, 2017
Electrical SystemUnknown Or Other

THERES ELECTRICAL PROBLEMS GOING ON, HAVING INTERIOR LIGHTS GO ON AND OFF, DRIVERS DOOR HANDLE BROKE FROM NORMAL WEAR AND TEAR, PASSENGER HEADLIGHT KEEPS GOING OUT AFTER ABOUT 2 WEEKS TOO A MONTH, DRIVERS SIDE CONTROLS DON'T WANT TO WORK ALL THE TIME TO TRY TO ROLL UP AND DOWN THE WINDOWS, MOVE BOTH ELECTRICAL MIRRORS, UNLOCK TH…

Read full complaint

THERES ELECTRICAL PROBLEMS GOING ON, HAVING INTERIOR LIGHTS GO ON AND OFF, DRIVERS DOOR HANDLE BROKE FROM NORMAL WEAR AND TEAR, PASSENGER HEADLIGHT KEEPS GOING OUT AFTER ABOUT 2 WEEKS TOO A MONTH, DRIVERS SIDE CONTROLS DON'T WANT TO WORK ALL THE TIME TO TRY TO ROLL UP AND DOWN THE WINDOWS, MOVE BOTH ELECTRICAL MIRRORS, UNLOCK THE DOORS.

NHTSA ODI #11047333

Mileage unknown · Sep 15, 2017
Unknown Or Other

DASH DEVELOPED TERRIBLE CRACKS ! REAR DOOR HANDLE BROKE LOOSE.

NHTSA ODI #11023594

Mileage unknown · Sep 12, 2017
Unknown Or Other

I PARKED AT MY PLACE OF WORK, I PUT MY WINDSHIELD SHADE UP AS I DO EVERYDAY, AND WHEN I CAME OUTSIDE TO GO HOME I NOTICED A CRACK ON THE DASH ON THE UPPER LEFT DASH SECTION BY THE AIRBAG, I'M WORRIED IF THE AIRBAG WERE TO DEPLOY THE DASH COULD SPLINTER SENDING PIECES OF SHARP PLASTIC AT THE PASSENGERS.

NHTSA ODI #11022920

110,000 miles · Aug 16, 2017
Air BagsUnknown Or Other

MY COMPLAINT IS FOR THE CRACKED DASHBOARD JUST ABOVE THE FORWARD LEFT CORNER OF THE PASSENGER SIDE AIRBAG COMPARTMENT. THE DASH CRACKED FOR NO APPARENT REASON; THERE IS NO KNOWN CAUSE. MY CONCERN IS BOTH COSMETIC AND SAFETY. NOT ONLY SHOULD A VEHICLE LESS THAN 5YRS OLD NOT HAVE A CRACKED DASHBOARD, BUT SINCE THE DASH IS CRACKED …

Read full complaint

MY COMPLAINT IS FOR THE CRACKED DASHBOARD JUST ABOVE THE FORWARD LEFT CORNER OF THE PASSENGER SIDE AIRBAG COMPARTMENT. THE DASH CRACKED FOR NO APPARENT REASON; THERE IS NO KNOWN CAUSE. MY CONCERN IS BOTH COSMETIC AND SAFETY. NOT ONLY SHOULD A VEHICLE LESS THAN 5YRS OLD NOT HAVE A CRACKED DASHBOARD, BUT SINCE THE DASH IS CRACKED DIRECTLY ADJACENT TO THE AIR BAG COMPARTMENT, AND IS APPARENTLY PRONE TO CRACKING, THERE IS THE POTENTIAL FOR THE DASH TO SPLINTER AND PROJECT SMALL PIECES OF PLASTIC INTO THE BODY OF PASSENGERS IF THE AIRBAG WERE TO BE DEPLOYED.

NHTSA ODI #11015822

130,000 miles · Aug 3, 2017
Unknown Or Other

LARGE CRACKS ARE FORMING ON THE DASHBOARD. ONE CRACK IS LOCATED NEAR THE SPEEDOMODER COLUMN AND THE OTHER DECENDS FROM THE PASSENGER AIRBAG.

NHTSA ODI #11012726

Mileage unknown · Jun 13, 2017
Unknown Or Other

DASHBOARD IS CRACKING NEAR THE PASSENGER SIDE AIRBAG

NHTSA ODI #10994923

Mileage unknown · May 8, 2017
Unknown Or Other

I TOOK MY TRUCK IN FOR SERVICE TO FIND THE HEATER CORE WAS BAD. TO REPLACE, THE DASHBOARD WOULD HAVE TO BE REMOVED. I ALREADY HAD A SMALL CRACK IN THE DASH LOCATED RIGHT ABOVE THE PASSENGER AIRBAG. AFTER SERVICE WAS PERFORMED AT THE DEALERSHIP, THE DASHBOARD NOW HAS TWO MORE CRACKS IN IT. THE DEALERSHIP SAID I WILL HAVE TO PA…

Read full complaint

I TOOK MY TRUCK IN FOR SERVICE TO FIND THE HEATER CORE WAS BAD. TO REPLACE, THE DASHBOARD WOULD HAVE TO BE REMOVED. I ALREADY HAD A SMALL CRACK IN THE DASH LOCATED RIGHT ABOVE THE PASSENGER AIRBAG. AFTER SERVICE WAS PERFORMED AT THE DEALERSHIP, THE DASHBOARD NOW HAS TWO MORE CRACKS IN IT. THE DEALERSHIP SAID I WILL HAVE TO PAY 40% AND THE CLOCK IN NOW TICKING. THE LONGER I WAIT, THE LESS GMC WILL PAY TO REPLACE. EVEN THOUGH THE SERVICE ADVISOR TOLD ME THAT GMC IS HAVING TROUBLE WITH THE DASH CRACKING, PEELING, ETC.

NHTSA ODI #10984314

52,000 miles · Apr 17, 2017
Unknown Or Other

A CRACK HAS DEVELOPED ON THE RIGHT CORNER OF PASSENGER SIDE DASH THAT BORDERS THE PASSENGER SIDE DASH AIRBAG. SEVERAL PEOPLE I WORK WITH HAVE DEVELOPED THE SAME PROBLEM IN THEIR GM TRUCKS AS WELL. IF THE BAG DEPLOYS MORE THAN LIKELY THE BAG WILL TEAR DUE TO THE SHARP CRACK EDGES AND BECAUSE OF THE FORCE SHARDS OF PLASTIC DASHBOA…

Read full complaint

A CRACK HAS DEVELOPED ON THE RIGHT CORNER OF PASSENGER SIDE DASH THAT BORDERS THE PASSENGER SIDE DASH AIRBAG. SEVERAL PEOPLE I WORK WITH HAVE DEVELOPED THE SAME PROBLEM IN THEIR GM TRUCKS AS WELL. IF THE BAG DEPLOYS MORE THAN LIKELY THE BAG WILL TEAR DUE TO THE SHARP CRACK EDGES AND BECAUSE OF THE FORCE SHARDS OF PLASTIC DASHBOARD WILL BE FLYING SHRAPNEL INSIDE THE CAB. I REFUSE TO HAVE MY CHILDREN SIT IN THE PASSENGER SIDE LET ALONE AN ADULT. WHEN DO YOU PLAN ON MAKING THIS ISSUE A SAFETY RECALL? WHEN PIECES OF DASHBOARD AND AIRBAG BLINDS SOMEBODY?

NHTSA ODI #10978736

Official recalls

3

21V053000 · Air Bags:frontal:passenger Side:inflator Module

Feb 5, 2021

General Motors, LLC (GM) is recalling certain 2013 Cadillac Escalade, Escalade ESV, and Escalade EXT, Chevrolet Avalanche, Silverado 1500, Silverado 2500/3500, Suburban, Tahoe, GMC Sierra 1500, Sierra 2500/3500, Yukon, and Yukon XL vehicles originally sold, or ever registered, in the states of Alabama, California, Florida, Georgia, Hawaii, Louisiana, Mississippi, South Carolina, Texas, Puerto Rico, American Samoa, Guam, the Northern Mariana Islands (Saipan), and the U.S. Virgin Islands or "Zone A." Additionally, GM is recalling certain 2010 Cadillac Escalade, Escalade ESV, and Escalade EXT, Chevrolet Avalanche, Silverado 1500, Silverado 2500/3500, Suburban, Tahoe, GMC Sierra 1500, Sierra 2500/3500, Yukon, and Yukon XL vehicles originally sold, or ever registered in the states of Arizona, Arkansas, Delaware, District of Columbia, Illinois, Indiana, Kansas, Kentucky, Maryland, Missouri, Nebraska, Nevada, New Jersey, New Mexico, North Carolina, Ohio, Oklahoma, Pennsylvania, Tennessee, Virginia, and West Virginia or "Zone B." Additionally, GM is recalling certain 2009 Cadillac Escalade, Escalade ESV, and Escalade EXT, Chevrolet Avalanche, Silverado 1500, Silverado 2500/3500, Suburban, Tahoe, GMC Sierra 1500, Sierra 2500/3500, Yukon, and Yukon XL vehicles originally sold, or ever registered, in the states of Alaska, Colorado, Connecticut, Idaho, Iowa, Maine, Massachusetts, Michigan, Minnesota, Montana, New Hampshire, New York, North Dakota, Oregon, Rhode Island, South Dakota, Utah, Vermont, Washington, Wisconsin, and Wyoming or "Zone C."

Consequence & remedy

Consequence: An inflator explosion may result in sharp metal fragments striking the driver or other occupants, resulting in serious injury or death.

Remedy: GM will notify owners, and dealers will replace the front passenger air bag inflator with an alternate one, free of charge. Interim letters notifying owners of the safety risk were mailed on February 24, 2021. Second notification letters will be mailed once the remedy is available. Owner notification letters were mailed on May 11, 2021. Owners may contact Cadillac customer service at 1-800-458-8006; Chevrolet customer service at 1-800-222-1020; and GMC customer service at 1-800-462-8782. GM's number for this recall is N212328790.

21V054000 · Air Bags:frontal:passenger Side:inflator Module

Feb 5, 2021

General Motors, LLC (GM) is recalling certain 2014 Cadillac Escalade, Escalade ESV, Chevrolet Silverado 2500, Silverado 3500, Suburban, Tahoe, GMC Sierra 2500, Sierra 3500, Yukon, and Yukon XL vehicles originally sold, or ever registered, in the states of AL, CA, FL, GA, HI, LA, MS, SC, TX, PR, AS, GU, the MP, and VI or "Zone A." Additionally GM is recalling certain 2011-2014 Cadillac Escalade, Escalade ESV, Chevrolet Silverado 2500, Silverado 3500, Suburban, Tahoe, GMC Sierra 2500, Sierra 3500, Yukon, Yukon XL and 2011-2013 Cadillac Escalade EXT, Chevrolet Avalanche, Silverado 1500, and GMC Sierra 1500 vehicles originally sold, or ever registered, in the states of AZ, AR, DE, DC, IL, IN, KS, KY, MD, MO, NE, NV, NJ, NM, NC, OH, OK, PA, TN, VA, and WV or "Zone B." Additionally, GM is recalling certain 2010-2014 Cadillac Escalade, Escalade ESV, Chevrolet Silverado 2500, Silverado 3500, Suburban, Tahoe, GMC Sierra 2500, Sierra 3500, Yukon, and Yukon XL and 2010-2013 Cadillac Escalade EXT, Chevrolet Avalanche, Silverado 1500, and GMC Sierra 1500 vehicles originally sold, or ever registered, in the states of AK, CO, CT, ID, IA, ME, MA, MI, MN, MT, NH, NY, ND, OR, RI, SD, UT, VT, WA, WI, and WY or "Zone C." These vehicles are equipped with non-desiccated passenger frontal inflators containing phase-stabilized ammonium nitrate (PSAN) propellant. These inflators may explode due to propellant degradation occurring after long-term exposure to high absolute humidity, high temperatures, and high temperature cycling.

Consequence & remedy

Consequence: An inflator explosion may result in sharp metal fragments striking the driver or other occupants, resulting in serious injury or death.

Remedy: GM will notify owners, and dealers will replace the front passenger air bag inflator with an alternate one, free of charge. Interim letters notifying owners of the safety risk were mailed on February 25, 2021. Second notification letters will be mailed once the remedy is available. Owner notification letters were mailed to 40 VIN owners on May 11, 2021. A second owner notification letter was mailed to all other owners on January 24, 2022. Owners may contact Chevrolet customer service at 1-800-222-1020; Cadillac customer service at 1-800-458-8006; and GMC customer service at 1-800-462-8782. GM's number for this recall is N212328800.

18V267000 · Equipment

Apr 26, 2018

General Motors LLC (GM) is recalling certain 2009-2014 Chevrolet Silverado HD and GMC Sierra HD, 2009 GMC Topkick 5000, 6000, 7000 and 8000 Series and Isuzu F Series, and 2009-2018 Chevrolet Express, and GMC Savana vehicles, equipped with certain Plastic-Handle Fire Extinguishers or Push Button 'Pindicator' Fire Extinguishers. These extinguishers may become clogged, preventing the extinguisher from discharging as expected or requiring excessive force to activate the extinguisher. Additionally, in certain models, the nozzle may detach from the valve assembly with enough force that it could cause injury and also render the product inoperable. For a full list of the affected fire extinguisher models visit: https://static.nhtsa.gov/odi/rcl/2017/RMISC-17E062-5427.pdf

Consequence & remedy

Consequence: In the event of a fire, if the fire extinguisher does not function properly, it can increase the risk of injury.

Remedy: GM will notify owners, instructing them to contact Kidde to get a replacement fire extinguisher, free of charge. The recall began June 11, 2018. Owners may contact Chevrolet customer service at 1-800-222-1020, GMC customer service at 1-800-462-8782, and Isuzu customer service at 1-866-441-9638. GM's number for this recall is 18146.

Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗

NHTSA investigations

2

DP22005 · Pedestrian Alert Sounds

Opened Jan 27, 2023 · Closed Aug 7, 2023

Status: closed (inferred from source dates) · Electrical System:propulsion System

NHTSA received a petition on or about July 18, 2022, requesting that Federal Motor Vehicle Safety Standard (FMVSS) 141 be applied to all electric and hybrid vehicles operating in the United States. The petition can be reviewed at NHTSA.gov under ODI Number 11486072. FMVSS 141 establishes performance requirements for pedestrian alert sounds for motor vehicles. The standard applies to hybrid and electric vehicles that have a gross vehicle weight rating of 4,536 KG or less or are defined as low-speed vehicles. The standard became fully applicable to all such vehicles manufactured on or after March 1, 2021.On January 27, 2023, NHTSA opened Defect Petition (DP) 22-005 to evaluate the subject matter described in the petition. On June 24, 2023 and as supplemented on June 25, 2023, the petitioner notified NHTSA he was withdrawing his petition. The petitioner indicated that, based on his review of data, there is no justification for asserting potential benefits that could be derived from actions sought by my petition. Based on the petitioner's withdrawal, DP22-005 is closed. Closure of this DP does not represent a determination by NHTSA regarding the subject matter of the petition.

EA21002 · Desiccated Air Bag Inflator Rupture

Opened Sep 17, 2021 · No close date supplied

Status: open (inferred from source dates) · Air Bags:frontal:driver Side:inflator Module; Air Bags:frontal:passenger Side:inflator Module

From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.

Additional source detail variants (2)

Air Bags:frontal:driver Side:inflator Module

From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.

Air Bags:frontal:passenger Side:inflator Module

From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.