IllustrationSee attached document for complaint.
2018 Freightliner Cascadia
Owner reports · Recalls · Investigations
Limited comparison data
There is not enough comparable history to draw a useful model-year comparison.
About this comparison →How this year compares
Owner complaints by model year
Compare all Cascadia years →Counts vary with age, sales and reporting. They are not failure rates.
What owners reported most
All reported categories
Tap a category to read its complaints. One report may name several components.
When problems were reported
Mileage at the reported incident
Limited mileage data: 2 of 11 reports include usable mileage. There isn’t enough coverage to show a useful chart.
NHTSA’s mileage field refers to the reported incident, not necessarily the filing date. This shows report counts, not the likelihood of a failure.
What to inspect
Issues worth paying extra attention to based on owner reports.
- Exterior Lighting. Review the 4 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
- Vehicle Speed Control. Review the 3 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
- Electrical System. Review the 2 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
NHTSA owner reports · September 18, 2026 snapshot.
2 crash reports1 fire reports0 injury reports
What owners actually said
11 reportsSee attached document for complaint.
The Automatic Emergency Braking System has activated at least 3 different times while I was driving. At each occurrence there was nothing in the roadway or travel lane. The vehicle came to an abrupt stop twice and slammed the brakes on but then released them a moment later once. In each event a very near collision with other veh…
Read full complaint
The Automatic Emergency Braking System has activated at least 3 different times while I was driving. At each occurrence there was nothing in the roadway or travel lane. The vehicle came to an abrupt stop twice and slammed the brakes on but then released them a moment later once. In each event a very near collision with other vehicles was almost caused. There are other drivers that use this truck that have reported similar events (5 or 6), but I cannot say for certain what the exact circumstances were in those events. This vehicle is available for inspection if requested. A dealer has not confirmed the problem, each time they report that the system in functioning correctly. The vehicle has not been inspected by any entity other than the dealer. No symptoms prior, only a red collision warning light in the gauge cluster and a warning beep at the immediate time of the event.
Unsure what system or component failed. Our driver was making a delivery on the morning of 4/29/23. He was parked at the consignee location, engine off, and reported hearing a loud pop sound from the tractor while he was offloading merchandise from the trailer. A fire started under the hood, he attempted to extinguish it with…
Read full complaint
Unsure what system or component failed. Our driver was making a delivery on the morning of 4/29/23. He was parked at the consignee location, engine off, and reported hearing a loud pop sound from the tractor while he was offloading merchandise from the trailer. A fire started under the hood, he attempted to extinguish it with the fire extinguisher and failed. The tractor burned to the ground. If the driver had been in the cab when it started, he could've been killed in the fire. Per online articles I found, it seems there were recalls on this same tractor year/model where fires were involved, but this unit shows no open recalls. Wreckage is available for inspection. CHP came to the seen, but to my knowledge there has been no inspection performed by anyone in any official capacity yet. No warning lamps or messages, or symptoms reported in advance of incident, just the loud pop sound reported by the driver.
The contact owns a 2018 Freightliner Cascadia. The contact stated that while the vehicle was turned off, the brake lights remained illuminated. The vehicle was not diagnosed nor repaired by an independent mechanic or dealer. The manufacturer was not made aware of the failure. The failure mileage was unknown.
After experiencing numerous issues with Jost 5th wheels, specifically JSK36N model. The Wear ring bolts (NT0000005) are constantly getting loose making the Wear ring (SK 2105-19) move in the 5th wheel plate, what we consider unsafe. While working on hundreds of trucks we have noticed that this is this issue is very popular. The…
Read full complaint
After experiencing numerous issues with Jost 5th wheels, specifically JSK36N model. The Wear ring bolts (NT0000005) are constantly getting loose making the Wear ring (SK 2105-19) move in the 5th wheel plate, what we consider unsafe. While working on hundreds of trucks we have noticed that this is this issue is very popular. The drivers have been complaining about the trailer king pin being loose in the 5th wheel, causing a hit/push on start/stop when driven in combination (truck + trailer). Because of not having the solid connection, the ‘’hits’’ are affecting the drivetrain (differentials and transmission) on the long run. Some on the drivers are panicking and not concentrated on the road, all because feeling unsafe due to the excessive 5th wheel free play. After the detailed inspection and understanding the problem, our technicians replaced hundreds of the Ring bolts, applied thread locker and torqued properly. Unfortunately the issue comes back again. The only way to get this issue resolved is to replace the whole 5th wheel assembly. This can get very pricy considering that the replacement of the 5th wheel costs thousands of dollars. It hardly hurts the bigger fleets. The situation described above was noticed mostly on 2017-2019 Freightliner Cascadia’s
Break lights stay on when truck is moving. It confuses drivers following the truck.other motorists would not know whether the truck is slowing down
HAD SAME ISSUES ON 2018-2020 FREIGHTLINER CASCADIAS (7 DIFFERENT UNITS), CHASSIS HARNESS RUBBING AGAINST TRANSMISSION AND THE METAL BRACKET BY THE AIR COMPRESSOR. ACTIVE FAULT CODES FOR COOLANT LEVEL , TCS, TRANSMISSION ECU - DRIVERS NOT ABLE TO DRIVE ON AUTOMATIC MODE/ ONLY MANUAL MODE AVAILABLE. ONE TIME THE DRIVER WAS NOT EVE…
Read full complaint
HAD SAME ISSUES ON 2018-2020 FREIGHTLINER CASCADIAS (7 DIFFERENT UNITS), CHASSIS HARNESS RUBBING AGAINST TRANSMISSION AND THE METAL BRACKET BY THE AIR COMPRESSOR. ACTIVE FAULT CODES FOR COOLANT LEVEL , TCS, TRANSMISSION ECU - DRIVERS NOT ABLE TO DRIVE ON AUTOMATIC MODE/ ONLY MANUAL MODE AVAILABLE. ONE TIME THE DRIVER WAS NOT EVEN ABLE TO START THE TRUCK IN THE MORNING, HAD TO GET THE UNIT TOWED TO THE DEALER AND HAVE THE HARNESS REPAIRED. ALL OF THE FAULTS PREVIOUSLY DESCRIBED COULD HAPPEN IN MOTION AND/OR WHEN VEHICLE WAS STATIONARY.
THE BRAKE LIGHTS STAY ON CONTINUOUSLY, EVEN WHEN THE TRUCK IS SHUT DOWN
BRAKE LIGHTS REMAIN ON DUE TO A FAILING BRAKE PRESSURE SWITCH.
Official recalls
2623V073000 · Electronic Stability Control (esc); Service Brakes, Air:antilock:modulator
Feb 10, 2023
Daimler Trucks North America, LLC (DTNA) is recalling certain 2017-2023 Freightliner Cascadia, 2020-2023 Western Star 49X, 2021-2023 Western Star 47X, and 2022 Freightliner 114SD vehicles. The brake modulator valves on the front axle may corrode and cause the vehicle to pull to the affected side during braking initiated by Electronic Stability Control (ESC) or Roll Stability Control (RSC).
Consequence & remedy
Consequence: Brakes that pull to one side may cause a sudden change in vehicle direction, increasing the risk of a crash.
Remedy: Dealers will inspect and replace the front brake modulator valves, as necessary. Some vehicles will have a software update which will alert driver when a replacement is required. All repairs will be performed free of charge. Owner notification letters were mailed beginning October 13, 2023. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL966.
Additional source detail variants (2)
Electronic Stability Control (esc)
Daimler Trucks North America, LLC (DTNA) is recalling certain 2017-2023 Freightliner Cascadia, 2020-2023 Western Star 49X, 2021-2023 Western Star 47X, and 2022 Freightliner 114SD vehicles. The brake modulator valves on the front axle may corrode and cause the vehicle to pull to the affected side during braking initiated by Electronic Stability Control (ESC) or Roll Stability Control (RSC).
Consequence: Brakes that pull to one side may cause a sudden change in vehicle direction, increasing the risk of a crash.
Remedy: Dealers will inspect and replace the front brake modulator valves, as necessary. Some vehicles will have a software update which will alert driver when a replacement is required. All repairs will be performed free of charge. Owner notification letters were mailed beginning October 13, 2023. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL966.
Service Brakes, Air:antilock:modulator
Daimler Trucks North America, LLC (DTNA) is recalling certain 2017-2023 Freightliner Cascadia, 2020-2023 Western Star 49X, 2021-2023 Western Star 47X, and 2022 Freightliner 114SD vehicles. The brake modulator valves on the front axle may corrode and cause the vehicle to pull to the affected side during braking initiated by Electronic Stability Control (ESC) or Roll Stability Control (RSC).
Consequence: Brakes that pull to one side may cause a sudden change in vehicle direction, increasing the risk of a crash.
Remedy: Dealers will inspect and replace the front brake modulator valves, as necessary. Some vehicles will have a software update which will alert driver when a replacement is required. All repairs will be performed free of charge. Owner notification letters were mailed beginning October 13, 2023. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL966.
22V817000 · Forward Collision Avoidance: Adaptive Cruise Control; Service Brakes, Air:antilock:modulator
Nov 1, 2022
Daimler Trucks North America, LLC (DTNA) is recalling certain 2017-2023 Freightliner Cascadia, 2020-2022 Freightliner Business Class M2, and 2022 Freightliner 114SD, and 2020-2023 Western Star 49X, 2021-2023 Western Star 47X, and 2021-2022 Western Star 57X vehicles. The brake modulator valves on the front axle may corrode and cause the vehicle to pull to the affected side during an Adaptive Cruise Control (ACC) braking event.
Consequence & remedy
Consequence: Brakes that pull to one side during an ACC braking event may cause a sudden change in vehicle direction, increasing the risk of a crash.
Remedy: Dealers will inspect and replace the front brake modulator valves, as necessary. Some vehicles will have a software update which will alert driver when a replacement is required. All repairs will be performed free of charge. Owner notification letters were mailed beginning October 16, 2023. DTNA's number for this recall is FL-958. This recall expands and replaces previous recall 20V-390. All vehicles previously repaired under recall 20V-390 will need to have the new remedy performed.
Additional source detail variants (2)
Service Brakes, Air:antilock:modulator
Daimler Trucks North America, LLC (DTNA) is recalling certain 2017-2023 Freightliner Cascadia, 2020-2022 Freightliner Business Class M2, and 2022 Freightliner 114SD, and 2020-2023 Western Star 49X, 2021-2023 Western Star 47X, and 2021-2022 Western Star 57X vehicles. The brake modulator valves on the front axle may corrode and cause the vehicle to pull to the affected side during an Adaptive Cruise Control (ACC) braking event.
Consequence: Brakes that pull to one side during an ACC braking event may cause a sudden change in vehicle direction, increasing the risk of a crash.
Remedy: Dealers will inspect and replace the front brake modulator valves, as necessary. Some vehicles will have a software update which will alert driver when a replacement is required. All repairs will be performed free of charge. Owner notification letters were mailed beginning October 16, 2023. DTNA's number for this recall is FL-958. This recall expands and replaces previous recall 20V-390. All vehicles previously repaired under recall 20V-390 will need to have the new remedy performed.
Forward Collision Avoidance: Adaptive Cruise Control
Daimler Trucks North America, LLC (DTNA) is recalling certain 2017-2023 Freightliner Cascadia, 2020-2022 Freightliner Business Class M2, and 2022 Freightliner 114SD, and 2020-2023 Western Star 49X, 2021-2023 Western Star 47X, and 2021-2022 Western Star 57X vehicles. The brake modulator valves on the front axle may corrode and cause the vehicle to pull to the affected side during an Adaptive Cruise Control (ACC) braking event.
Consequence: Brakes that pull to one side during an ACC braking event may cause a sudden change in vehicle direction, increasing the risk of a crash.
Remedy: Dealers will inspect and replace the front brake modulator valves, as necessary. Some vehicles will have a software update which will alert driver when a replacement is required. All repairs will be performed free of charge. Owner notification letters were mailed beginning October 16, 2023. DTNA's number for this recall is FL-958. This recall expands and replaces previous recall 20V-390. All vehicles previously repaired under recall 20V-390 will need to have the new remedy performed.
20V567000 · Exterior Lighting:brake Lights
Feb 16, 2022
Daimler Trucks North America LLC (DTNA) is recalling certain 2017-2021 Cascadia P4 vehicles. The brake lights may remain illuminated after the brake pedal has been released.
Consequence & remedy
Consequence: If the brake lights remain illuminated, drivers may be unaware when the truck is actually slowing or stopping, increasing the risk of a crash.
Remedy: DTNA will notify owners, and dealers will replace the 3-pin brake pressure switch with a 2-pin brake pressure switch along with a jumper harness, free of charge. DTNA issued owners an interim notification on November 17, 2020. Owner notification letters were mailed on November 21, 2021. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-863.
21V357000 · Exterior Lighting:headlights:bulbs
May 14, 2021
Daimler Trucks North America, LLC (DTNA) is recalling certain 2017-2022 Freightliner Cascadia vehicles equipped with halogen headlight assemblies. The halogen headlight bulb may dislodge during replacement and contact other vehicle components, possibly causing them to melt.
Consequence & remedy
Consequence: Melting components can increase the risk of fire.
Remedy: Dealers will install a foam grommet, cut a 4-inch access hole into the inner fender, and add a warning label on both fenders, free of charge. Owner notification letters were mailed on July 9, 2021. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-887.
20V642000 · Power Train:clutch Assembly
Oct 16, 2020
Daimler Trucks North America LLC (DTNA) is recalling certain 2018-2019 Freightliner Cascadia, Business Class M2, 108SD, 114SD and 122SD and Western Star 4700, 4900 and 5700 vehicles. An internal component within the clutch assembly may fail, which in certain circumstances could allow the vehicle to move unexpectedly.
Consequence & remedy
Consequence: Unintended vehicle movement van increase the risk of a crash.
Remedy: DTNA will notify owners, and dealers will update the software and replace the clutches, free of charge. DTNA issued owners an interim notification on December 7, 2020. Owner notification letters were mailed on May 28, 2021. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-865.
20V390000 · Service Brakes, Air:supply:quick Release Valve
Jul 2, 2020
Daimler Trucks North America LLC (DTNA) is recalling certain 2017-2021 Freightliner Cascadia tractor trailers. The single brake modulator valve may be affected by chemical corrosion which can slow down the release timing and cause the brakes to pull to the affected side during automatic braking events.
Consequence & remedy
Consequence: Brakes that pull to one side during automatic braking events may cause a sudden change in vehicle direction, increasing the risk of a crash.
Remedy: DTNA will notify owners, and dealers will replace the front left and right single brake modulator valves will be replaced and spacers added, free of charge. The recall began August 28, 2020. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-855.
20V214000 · Exterior Lighting
Apr 14, 2020
Daimler Trucks North America LLC (DTNA) is recalling certain 2006-2020 Freightliner Columbia, 2006-2021 Freightliner Business Class M2, 2007-2020 Freightliner Coronado, 2014-2021 Freightliner 122 SD, 2007 Sterling A 9500, 2006 Freightliner Argosy, 2006-2007 Sterling AT9500, 2008-2021 Freightliner Cascadia, 2006-2008 Freightliner Classic, 2006-2011 Freightliner Century Class, 2006-2010 Freightliner FLD, and 2017 Western Star 5700 vehicles. The rear reflective tape may be partially covered by the mudflap hanger bracket, which may reduce the vehicle's visibility to other drivers on the road. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 108, "Lamps, Reflective Devices, and Associated Equipment."
Consequence & remedy
Consequence: The vehicle's rearward visibility may be reduced, increasing the risk of a crash.
Remedy: DTNA will notify owners, and dealers will inspect and reposition the reflective tape to ensure that it is completely visible, as necessary, free of charge. The recall began May 29, 2020. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL848.
19V711000 · Service Brakes, Air:antilock:abs Warning Light
Oct 7, 2019
Daimler Trucks North America LLC (DTNA) is recalling certain 2018-2020 Freightliner Cascadia vehicles. The ABS Electronic Control Unit (ECU) may not detect an incorrectly functioning solenoid valve for the ABS/ESC module during certain low voltage start conditions, potentially causing the ABS/ESC Malfunction indicator not to illuminate. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 121, "Air Brake Systems" and number 136, "Electronic Stability Control Systems on Heavy Vehicles."
Consequence & remedy
Consequence: Without the alert, an operator may not be aware of an active ABS/ESC malfunction and unknowingly operate the vehicle with reduced ABS/ESC function, increasing the risk of a crash.
Remedy: DTNA will notify owners, and dealers will reprogram the ABS/ESC module, free of charge. The recall began December 2, 2019. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-830.
19V370000 · Service Brakes, Air:supply:reservoir/tank
May 14, 2019
Daimler Trucks North America LLC (DTNA) is recalling certain 2004-2019 Freightliner 108SD, 114SD, 122SD, Cascadia, Columbia, Classic, FL80, FLD 120SD, Business Class M2, Western Star 4700, 4900, 6900, Sterling Acterra, L7500, LT7500, L8500, LT8500, L9500, and LT9500 vehicles. The vehicles may have an insufficient service brake air reservoir capacity. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 121, "Air Brake Systems."
Consequence & remedy
Consequence: An insufficient air reservoir volume may reduce brake effectiveness, increasing the risk of crash.
Remedy: DTNA will notify owners, and dealers will add air reservoir capacity to the affected vehicles. Owner letters were mailed on November 29, 2021. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-815.
19V136000 · Service Brakes, Air:antilock:abs Warning Light
Feb 27, 2019
Daimler Trucks North America LLC (DTNA) is recalling certain 2018-2019 Freightliner Cascadia vehicles. In the affected vehicles, the Anti-Lock Braking system (ABS) malfunction warning light may not reactivate after the ignition has been turned off and then switched back on. As such, the vehicles fail to comply with Federal Motor Vehicle Safety Standard (FMVSS) number 121, "Air Brake Systems."
Consequence & remedy
Consequence: Unknowingly operating a truck with an ABS malfunction may increase the risk of a crash.
Remedy: DTNA will notify owners, and dealers will reprogram the ABS module, free of charge. The recall began April 26, 2019. Owners may contact DTNA customer service at 1-800-547-0712. The DTNA number for this recall is FL-810.
19V066000 · Air Bags:frontal
Feb 7, 2019
Daimler Trucks North America LLC (DTNA) is recalling certain 2018-2020 Freightliner Cascadia vehicles equipped with an optional steering wheel air bag. The driver's frontal air bag may deploy unexpectedly.
Consequence & remedy
Consequence: If the driver's frontal air bag deploys unexpectedly, it can increase the risk of a crash.
Remedy: Daimler Trucks North America (DTNA) will notify owners, and dealers will remove the air bag as an the interim remedy, free of charge. DTNA is developing a remedy program, which when available, will be communicated to customers and dealers. DTNA issued owners an interim notification on April 5, 2019. The recall began July 19, 2019. Owners may contact Daimler Trucks customer service at 1-800-547-0712. DTNA's number for this recall is FL806. This recall supersedes recall 18V-787.
18V903000 · Power Train:clutch Assembly
Dec 19, 2018
Daimler Trucks North America LLC (DTNA) is recalling certain 2018-2019 Freightliner 108SD, 114SD, 122SD, Cascadia, Business Class M2, Western Star 4700, 4900, and 5700 vehicles, equipped with certain Eaton ECA heavy-duty truck clutches. An internal component in the clutch assembly may fail, possibly resulting in unintended vehicle movement.
Consequence & remedy
Consequence: Unintended vehicle movement can increase the risk of a crash.
Remedy: DTNA will notify owners, and dealers will update the software, and repair any physical components, free of charge. DTNA issued owners an interim notification on February 16, 2019. The recall began July 31, 2019. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-803.
18V913000 · Steering; Steering:linkages:tie Rod Assembly; Suspension:front:control Arm
Dec 19, 2018
Daimler Trucks North America LLC (DTNA) is recalling certain 2017-2019 Freightliner 114SD, 122SD, 108SD, Cascadia and Business class M2 trucks, Freightliner Custom Chassis XBS, XCL, XCM, MT45, MT55, S2G, S2RV, XCR and XCS custom chassis and Western Star 4700, 4900 and 5700 trucks equipped with Detroit Axle axles. The affected vehicles may have loose steering and tie rod arm bolts.
Consequence & remedy
Consequence: Loose tie rod arm bolts may lead to separation of the tie rod arm, resulting in a loss of vehicle control, increasing the risk of a crash.
Remedy: DTNA has notified owners, and dealers will inspect the steering arm and tie rod arm bolts for to make sure that they are properly tightened, installing new fasteners as necessary, free of charge. The recall began February 9, 2019. Owners may contact Daimler Trucks at 1-800-547-0712. DTNA's number for this recall is FL-802.
Additional source detail variants (3)
Suspension:front:control Arm
Daimler Trucks North America LLC (DTNA) is recalling certain 2017-2019 Freightliner 114SD, 122SD, 108SD, Cascadia and Business class M2 trucks, Freightliner Custom Chassis XBS, XCL, XCM, MT45, MT55, S2G, S2RV, XCR and XCS custom chassis and Western Star 4700, 4900 and 5700 trucks equipped with Detroit Axle axles. The affected vehicles may have loose steering and tie rod arm bolts.
Consequence: Loose tie rod arm bolts may lead to separation of the tie rod arm, resulting in a loss of vehicle control, increasing the risk of a crash.
Remedy: DTNA has notified owners, and dealers will inspect the steering arm and tie rod arm bolts for to make sure that they are properly tightened, installing new fasteners as necessary, free of charge. The recall began February 9, 2019. Owners may contact Daimler Trucks at 1-800-547-0712. DTNA's number for this recall is FL-802.
Steering:linkages:tie Rod Assembly
Daimler Trucks North America LLC (DTNA) is recalling certain 2017-2019 Freightliner 114SD, 122SD, 108SD, Cascadia and Business class M2 trucks, Freightliner Custom Chassis XBS, XCL, XCM, MT45, MT55, S2G, S2RV, XCR and XCS custom chassis and Western Star 4700, 4900 and 5700 trucks equipped with Detroit Axle axles. The affected vehicles may have loose steering and tie rod arm bolts.
Consequence: Loose tie rod arm bolts may lead to separation of the tie rod arm, resulting in a loss of vehicle control, increasing the risk of a crash.
Remedy: DTNA has notified owners, and dealers will inspect the steering arm and tie rod arm bolts for to make sure that they are properly tightened, installing new fasteners as necessary, free of charge. The recall began February 9, 2019. Owners may contact Daimler Trucks at 1-800-547-0712. DTNA's number for this recall is FL-802.
Steering
Daimler Trucks North America LLC (DTNA) is recalling certain 2017-2019 Freightliner 114SD, 122SD, 108SD, Cascadia and Business class M2 trucks, Freightliner Custom Chassis XBS, XCL, XCM, MT45, MT55, S2G, S2RV, XCR and XCS custom chassis and Western Star 4700, 4900 and 5700 trucks equipped with Detroit Axle axles. The affected vehicles may have loose steering and tie rod arm bolts.
Consequence: Loose tie rod arm bolts may lead to separation of the tie rod arm, resulting in a loss of vehicle control, increasing the risk of a crash.
Remedy: DTNA has notified owners, and dealers will inspect the steering arm and tie rod arm bolts for to make sure that they are properly tightened, installing new fasteners as necessary, free of charge. The recall began February 9, 2019. Owners may contact Daimler Trucks at 1-800-547-0712. DTNA's number for this recall is FL-802.
18V742000 · Exterior Lighting:brake Lights; Exterior Lighting:brake Lights:switch
Oct 19, 2018
Daimler Trucks North America (DTNA) is recalling certain 2017-2018 Freightliner Cascadia vehicles. The brakes lights on these vehicles may remain activated after the brake pedal is released.
Consequence & remedy
Consequence: If the brake lights remain activated, other drivers may be unaware that the vehicle is actually slowing or stopping, increasing the risk of a crash.
Remedy: DTNA will notify owners and dealers will replace the brake light switch. The recall began January 18, 2019. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-799.
Additional source detail variants (2)
Exterior Lighting:brake Lights:switch
Daimler Trucks North America (DTNA) is recalling certain 2017-2018 Freightliner Cascadia vehicles. The brakes lights on these vehicles may remain activated after the brake pedal is released.
Consequence: If the brake lights remain activated, other drivers may be unaware that the vehicle is actually slowing or stopping, increasing the risk of a crash.
Remedy: DTNA will notify owners and dealers will replace the brake light switch. The recall began January 18, 2019. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-799.
Exterior Lighting:brake Lights
Daimler Trucks North America (DTNA) is recalling certain 2017-2018 Freightliner Cascadia vehicles. The brakes lights on these vehicles may remain activated after the brake pedal is released.
Consequence: If the brake lights remain activated, other drivers may be unaware that the vehicle is actually slowing or stopping, increasing the risk of a crash.
Remedy: DTNA will notify owners and dealers will replace the brake light switch. The recall began January 18, 2019. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-799.
18V703000 · Service Brakes, Air:disc:caliper
Oct 5, 2018
Daimler Trucks North America, LLC (DTNA) is recalling certain 2018-2019 Freightliner 108SD, 114SD, Cascadia, Business Class M2, Freightliner Custom Chassis Corporation S2C 106 Cab, S2G Cab Chassis, XCL, XCM, XBS, XCP, XCR, Western Star 4700, 4900 and 5700 trucks. The brake caliper mounting bolts may have been insufficiently tightened.
Consequence & remedy
Consequence: Loose brake caliper mounting bolts can reduce brake effectiveness, increasing the risk of a crash.
Remedy: DTNA will notify owners, and dealers will check and tighten the brake caliper mounting bolts, free of charge. The recall began December 3, 2018. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-794.
18V581000 · Engine And Engine Cooling:engine:diesel
Aug 30, 2018
Daimler Trucks North America LLC (DTNA) is recalling certain 2017-2019 Freightliner Cascadia, Coronado and 122SD, and Western Star 4900 trucks, equipped with Cummins ISX15 or X15 diesel engines. In certain driving conditions, such as on a long down-hill grade, the fuel line may burst if the fuel pump cooling circuit screen becomes restricted.
Consequence & remedy
Consequence: If the fuel line bursts, fuel may leak onto the road resulting in a roadway hazard for other motorists. The engine may also stall without warning, resulting in the vehicle's inability to restart, increasing the risk of a crash.
Remedy: Dealers will replace the affected nylon fuel line with a steel fuel line, free of charge. The recall began November 21, 2018. Owners may contact DTNA customer service at 1-800-547-0712 or Cummins customer service at 1-800-286-6467. DTNA's number for this recall is FL789.
18V525000 · Service Brakes, Air:disc:caliper
Aug 9, 2018
Daimler Trucks North America, LLC (DTNA) is recalling certain 2018-2019 Freightliner 108SD, 114SD, 122SD, Cascadia, Columbia, Coronado, and Business Class M2 vehicles. During manufacturing, the brake caliper mounting bolts may have been insufficiently tightened.
Consequence & remedy
Consequence: Loose brake caliper mounting bolts can reduce brake effectiveness, increasing the risk of a crash.
Remedy: DTNA will notify owners, and dealers will check and tighten the brake caliper mounting bolts, free of charge. The recall began October 5, 2018. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-783.
18V522000 · Steering:gear Box:shaft Pitman
Aug 8, 2018
Daimler Trucks North America, LLC (DTNA) is recalling certain 2018-2019 Freightliner Cascadia vehicles. Over time, the pitman arms may crack and fracture.
Consequence & remedy
Consequence: If the pitman arm fractures there would be a loss of steering control, increasing the risk of a crash.
Remedy: DTNA will notify owners, and dealers will replace the pitman arms, free of charge. The recall is expected to begin October 6, 2018. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-784.
18V491000 · Electrical System: Instrument Cluster/panel
Jul 20, 2018
Daimler Trucks North America, LLC (DTNA) is recalling certain 2017-2019 Freightliner Cascadia trucks. The Instrument Cluster Unit (ICU) may not perform the required bulb checks for the Anti-lock Brake System (ABS) or Electronic Stability Control (ESC) if the ignition is turned from on to off to on too quickly. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 121, "Air Brake Systems," and 136, "Electronic Stability Control Systems on Heavy Vehicles."
Consequence & remedy
Consequence: Without an ABS or ESC bulb check, the operator may unaware that the warning light bulbs are not working. If the warning bulbs are not working, in the event of an ABS or ESC malfunction, the driver may not be notified, increasing the risk of a crash.
Remedy: DTNA will notify owners, and dealers will reprogram the ICU's to ensure a bulb check is performed each time the ignition is turned on, free of charge. Also, the sub-population with Tire Pressure Monitoring (TMPS) will also require replacement parts, free of charge. DTNA issued owners an interim notification on September 18, 2018. The recall began March 5, 2019. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-780.
18V411000 · Service Brakes, Air:disc:caliper
Jun 15, 2018
Daimler Trucks North America LLC (DTNA) is recalling certain 2018-2019 Freightliner Cascadia vehicles. The brake caliper mounting bolts on these vehicles may not been properly tightened, potentially resulting in the caliper detaching.
Consequence & remedy
Consequence: If the calipers detach, there would be reduced braking performance, increasing the risk of a crash.
Remedy: DTNA will notify owners, and dealers will inspect the brake caliper mounting bolts, tightening them as necessary, free of charge. The recall began on August 13, 2018. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-775.
18V353000 · Service Brakes, Hydraulic:foundation Components:disc:caliper
May 29, 2018
Daimler Trucks North America LLC (DTNA) is recalling certain 2017-2019 Freightliner M2 Business Class, 108SD, 114SD and Cascadia trucks, Western Star 4700, 4900, and 5700 trucks, FCCC S2C 106 Cab, S2G Cab, XBR, XBS, XCL, XCM, XCP, XCR, and XCS chassis equipped with air disc brakes. The brake caliper mounting bolts on these vehicles may be insufficiently tightened, allowing the bolts to loosen.
Consequence & remedy
Consequence: If the brake caliper mounting bolts loosen, braking performance may be reduced, increasing the risk of a crash.
Remedy: DTNA will notify owners, and dealers will inspect the brake caliper mounting bolts and tighten them as necessary, free of charge. DTNA issued owners an interim notification on July 25, 2018. The recall began September 4, 2018. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-772.
18V300000 · Air Bags:frontal
May 8, 2018
Daimler Trucks North America LLC (DTNA) is recalling certain 2018-2019 Freightliner Cascadia vehicles. The fasteners that secure the driver's air bag module within the steering wheel may not have been installed to specification, possibly affecting the frontal air bag deployment in the event of a crash.
Consequence & remedy
Consequence: An incorrectly installed air bag may not function correctly in a crash, increasing the risk of injury.
Remedy: DTNA will notify owners, and dealers will inspect the frontal air bag fasteners, tightening them to the proper specification, free of charge. The recall began on July 9, 2018. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-771.
17V761000 · Exterior Lighting:brake Lights; Exterior Lighting:brake Lights:switch
Nov 27, 2017
Daimler Trucks North America, LLC (DTNA) is recalling certain 2008-2018 Freightliner Cascadia, Western Star 4700, 4900, 5700, and 6900 trucks. After hard brake applications, the brake light pressure switch may not activate the brake lights with a light application of the brake pedal.
Consequence & remedy
Consequence: If the brake lights fail to illuminate, there would not be a signal to other motorists that the vehicle is slowing, increasing the risk of a crash.
Remedy: DTNA will notify owners, and dealers will repair the vehicles, free of charge. Daimler issued interim notifications to owners on January 22, 2018. The recall began on May 9, 2018. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-756.
Additional source detail variants (2)
Exterior Lighting:brake Lights:switch
Daimler Trucks North America, LLC (DTNA) is recalling certain 2008-2018 Freightliner Cascadia, Western Star 4700, 4900, 5700, and 6900 trucks. After hard brake applications, the brake light pressure switch may not activate the brake lights with a light application of the brake pedal.
Consequence: If the brake lights fail to illuminate, there would not be a signal to other motorists that the vehicle is slowing, increasing the risk of a crash.
Remedy: DTNA will notify owners, and dealers will repair the vehicles, free of charge. Daimler issued interim notifications to owners on January 22, 2018. The recall began on May 9, 2018. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-756.
Exterior Lighting:brake Lights
Daimler Trucks North America, LLC (DTNA) is recalling certain 2008-2018 Freightliner Cascadia, Western Star 4700, 4900, 5700, and 6900 trucks. After hard brake applications, the brake light pressure switch may not activate the brake lights with a light application of the brake pedal.
Consequence: If the brake lights fail to illuminate, there would not be a signal to other motorists that the vehicle is slowing, increasing the risk of a crash.
Remedy: DTNA will notify owners, and dealers will repair the vehicles, free of charge. Daimler issued interim notifications to owners on January 22, 2018. The recall began on May 9, 2018. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-756.
17V730000 · Power Train:automatic Transmission
Nov 17, 2017
Daimler Trucks North America LLC (DTNA) is recalling certain 2018 Freightliner Cascadia trucks equipped with Detroit automatic transmissions. A shift lock bolt within the transmission can seize, preventing the transmission from being shifted out of gear range 7 through 12.
Consequence & remedy
Consequence: If the transmission cannot be shifted out of gear range 7 through 12, the engine may stall, increasing the risk of a crash.
Remedy: DTNA will notify owners, and dealers will inspect the transmissions and replace the transmission shift bolt, as necessary, free of charge. The recall began on February 28, 2018. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-754.
17V629000 · Steering
Oct 6, 2017
Daimler Trucks North America LLC (DTNA) is recalling certain 2017-2018 Freightliner Cascadia vehicles. The upper steering pinch bolt may not have been properly tightened, possibly causing a loss of mechanical connection between the steering wheel and front wheels.
Consequence & remedy
Consequence: A loss of steering control increases the risk of a crash.
Remedy: DTNA will notify owners, and dealers will verify that the upper steering shaft pinch bolt is properly tightened, free of charge. The recall began on October 26, 2017. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-748. Note: Owners are advised not to drive their vehicles until they have been checked.
17V452000 · Equipment
Jul 17, 2017
Daimler Trucks North America (DTNA) is recalling certain 2018 Freightliner Cascadia, M2 Business Class, 114SD, and 122SD trucks, and Western Star 4700 and 5700 trucks. These vehicles have tow hooks used for recovery purposes that may fail during use.
Consequence & remedy
Consequence: If the tow hook fails without warning during a recovery operation, the sudden release of the vehicle may increase the risk of injury.
Remedy: DTNA will notify owners, and dealers will inspect the vehicle's tow hooks and, depending on their production date codes, will replace them, free of charge. The recall began on September 14, 2017. Owners may contact DTNA customer service at 1-800-745-8000. DTNA's number for this recall is FL-742.
Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗
NHTSA investigations
5EA25006 · Automatic Emergency Braking Errors
Opened Oct 23, 2025 · No close date supplied
Status: open (inferred from source dates) · Forward Collision Avoidance: Dynamic Brake Support/brake Assist
On May 26, 2023, the Office of Defects Investigation (ODI) opened a Preliminary Evaluation (PE23010) to assess reports of false positive activation of the Automatic Emergency Braking (AEB) system in model year (MY) 2017-2022 Daimler Trucks North America (DTNA) vehicles. The reports alleged that activation of the AEB system occurred while driving with no apparent obstruction in the vehicle's forward path, resulting in sudden vehicle deceleration. DTNA indicated that it received of a total of 315 reports that may relate to the alleged defect in MY 2017-2022 DTNA vehicles. DTNA stated that the vast majority of false positive activation of the subject systems occur in very limited durations and result in a five mile per hour deceleration. ODI considered four AEB systems offered by DTNA: Detroit Assurance 2.0, Detroit Assurance 4.0, Detroit Assurance 5.0, and Wabco OnGuard. ODI’s analysis shows that of the Detroit Assurance versions, all are failing at similar rates. The OnGuard AEB systems equipped on the same model and model year vehicles have experienced a significantly lower claim rate. To date, ODI has received a total of 32 consumer complaints of inadvertent activation of AEB in MY 2017-2022 DTNA vehicles. In total, ODI reviewed 347 unique (i.e., non-duplicative Vehicle Identification Numbers) reports that may relate to the alleged defect, which include 24 reports involving a crash, 13 reports involving an alleged injury and one report with a fatality. PE23010 has been upgraded to an Engineering Analysis to further assess the scope, frequency, and potential safety related consequences of the inadvertent AEB activations in MY 2017-2022 DTNA vehicles. To review the ODI reports cited in the Opening Resume ODI Report Identification Number document, go to NHTSA.gov.
PE23010 · Automatic Emergency Braking Errors
Opened May 26, 2023 · Closed Oct 23, 2025
Status: closed (inferred from source dates) · Forward Collision Avoidance: Dynamic Brake Support/brake Assist
On May 26, 2023, the Office of Defects Investigation (ODI) opened a Preliminary Evaluation (PE23010) to assess reports of false positive activation of the Automatic Emergency Braking (AEB) system in model year (MY) 2017-2022 Daimler Trucks North America (DTNA) vehicles. The reports alleged that activation of the AEB system occurred while driving with no apparent obstruction in the vehicle's forward path, resulting in unexpected and sudden vehicle deceleration. ODI sent an information request letter to DTNA on June 15, 2023.In its September 1, 2023, response, DTNA indicated that it received of a total of 315 reports that may relate to the alleged defect in MY 2017-2022 DTNA vehicles. DTNA stated that the vast majority of false positive activation of the subject systems occur for very limited durations and result in a five mile per hour deceleration. ODI considered four AEB systems offered by DTNA: Detroit Assurance 2.0, Detroit Assurance 4.0, Detroit Assurance 5.0, and Wabco OnGuard. ODI’s analysis shows that of the Detroit Assurance versions, all fail at similar rates. The Wabco OnGuard AEB systems equipped on the same model and model year vehicles have experienced a significantly lower claim rate. To date, ODI has received a total of 32 consumer complaints of inadvertent activation of AEB in MY 2017-2022 DTNA vehicles. In total, ODI reviewed 347 unique (i.e., non-duplicative Vehicle Identification Number) reports that may relate to the alleged defect, which include 24 involving a crash, 13 reports involving an alleged injury and one report with a fatality. PE23010 has been upgraded to an Engineering Analysis (EA25006) to further assess the scope, frequency, and nature of the inadvertent AEB activations in MY 2017-2022 Freightliner Cascadia and Western Star 5700 vehicles.In particular, this EA will assess the safety consequences likely to arise in the scenarios during which the AEB inadvertently and unexpectedly activates, such as the speeds and conditions during which the activation occurs. To review the ODI reports cited in the Closing Resume ODI Report Identification Number document, go to NHTSA.gov.
PE21004 · Engine Electrical Wiring Harness Chafe
Opened Feb 25, 2021 · Closed Jan 14, 2025
Status: closed (inferred from source dates) · Electrical System; Electrical System: Instrument Cluster/panel; Electrical System:wiring; Electrical System:wiring:front Underhood; Engine; Engine And Engine Cooling; Engine And Engine Cooling:engine; Engine And Engine Cooling:engine:diesel; Engine And Engine Cooling:engine:engine Control Module (ecu/ecm)
The Office of Defects Investigation (ODI) opened this Preliminary Evaluation to investigate reports of engine electrical wiring harness chafe on the subject vehicles.ODI analysis found thousands of unique harness part numbers, spanning the two generations of vehicle chassis assembled at multiple vehicle assembly plants in two different countries, with multiple sub-models, incorporating over thirty powertrain choices.Each wiring harness could contain several dozen individual wires for power, ground and communication purposes depending on the multitude of equipment options available for custom vehicle configuration. ODI identified three primary areas where a wiring harness bundle may chafe: the air compressor support bracket, the transmission case, or the coolant surge tank. In each case, the root cause was some combination of inadequate design clearance, installation variability and relative motion between the wiring harness and the point of contact, such as from vibration. The chafing could result in a range of consequences from none to various diagnostic fault codes, telltale illumination, driver warning center messages, erratic electrical component operation, difficult or no engine start condition, engine de-rate (power reduction), engine shut down, inoperative transmission gear selection, or an unexpected shift to neutral.These potential consequences vary depending on the specific damaged wire in the harness and the exact failure mode, such as intermittent short circuit to ground or open circuit. Generally, the chafing resulted in a progressive series of driver warnings with high levels of detectability over the course of several days and ignition cycles. Drivers usually heed warnings before an engine shutdown condition occurs and the driver may override an engine shutdown countdown timer using the override switch. If the driver allows the shutdown event to occur, the engine can almost always be immediately restarted. Incident rates for an engine shutdown with no warning or a transmission shift to neutral while driving are both very low. ODI received one complaint (NHTSA ID Number 11366557) from a fleet mechanic, who reported in a subsequent interview that he repaired at least six subject vehicles that experienced the alleged defect condition. However, there have been no new Vehicle Owner Questionnaire complaints received by ODI since opening this investigation, and there are no known crashes, fires or thermal events, or injuries or deaths related to the alleged defect. Accordingly, no safety-related defect trend has been identified. Based on available information, this investigation is closed.The closing of this investigation does not constitute a finding by NHTSA that a safety-related defect does not exist. The Agency reserves the right to take additional action if warranted by future circumstances. To review the ODI report cited in the Closing Resume ODI Report Identification Numbers document, go to NHTSA.gov.
Additional source detail variants (9)
Electrical System
The Office of Defects Investigation (ODI) opened this Preliminary Evaluation to investigate reports of engine electrical wiring harness chafe on the subject vehicles.ODI analysis found thousands of unique harness part numbers, spanning the two generations of vehicle chassis assembled at multiple vehicle assembly plants in two different countries, with multiple sub-models, incorporating over thirty powertrain choices.Each wiring harness could contain several dozen individual wires for power, ground and communication purposes depending on the multitude of equipment options available for custom vehicle configuration. ODI identified three primary areas where a wiring harness bundle may chafe: the air compressor support bracket, the transmission case, or the coolant surge tank. In each case, the root cause was some combination of inadequate design clearance, installation variability and relative motion between the wiring harness and the point of contact, such as from vibration. The chafing could result in a range of consequences from none to various diagnostic fault codes, telltale illumination, driver warning center messages, erratic electrical component operation, difficult or no engine start condition, engine de-rate (power reduction), engine shut down, inoperative transmission gear selection, or an unexpected shift to neutral.These potential consequences vary depending on the specific damaged wire in the harness and the exact failure mode, such as intermittent short circuit to ground or open circuit. Generally, the chafing resulted in a progressive series of driver warnings with high levels of detectability over the course of several days and ignition cycles. Drivers usually heed warnings before an engine shutdown condition occurs and the driver may override an engine shutdown countdown timer using the override switch. If the driver allows the shutdown event to occur, the engine can almost always be immediately restarted. Incident rates for an engine shutdown with no warning or a transmission shift to neutral while driving are both very low. ODI received one complaint (NHTSA ID Number 11366557) from a fleet mechanic, who reported in a subsequent interview that he repaired at least six subject vehicles that experienced the alleged defect condition. However, there have been no new Vehicle Owner Questionnaire complaints received by ODI since opening this investigation, and there are no known crashes, fires or thermal events, or injuries or deaths related to the alleged defect. Accordingly, no safety-related defect trend has been identified. Based on available information, this investigation is closed.The closing of this investigation does not constitute a finding by NHTSA that a safety-related defect does not exist. The Agency reserves the right to take additional action if warranted by future circumstances. To review the ODI report cited in the Closing Resume ODI Report Identification Numbers document, go to NHTSA.gov.
Electrical System: Instrument Cluster/panel
The Office of Defects Investigation (ODI) opened this Preliminary Evaluation to investigate reports of engine electrical wiring harness chafe on the subject vehicles.ODI analysis found thousands of unique harness part numbers, spanning the two generations of vehicle chassis assembled at multiple vehicle assembly plants in two different countries, with multiple sub-models, incorporating over thirty powertrain choices.Each wiring harness could contain several dozen individual wires for power, ground and communication purposes depending on the multitude of equipment options available for custom vehicle configuration. ODI identified three primary areas where a wiring harness bundle may chafe: the air compressor support bracket, the transmission case, or the coolant surge tank. In each case, the root cause was some combination of inadequate design clearance, installation variability and relative motion between the wiring harness and the point of contact, such as from vibration. The chafing could result in a range of consequences from none to various diagnostic fault codes, telltale illumination, driver warning center messages, erratic electrical component operation, difficult or no engine start condition, engine de-rate (power reduction), engine shut down, inoperative transmission gear selection, or an unexpected shift to neutral.These potential consequences vary depending on the specific damaged wire in the harness and the exact failure mode, such as intermittent short circuit to ground or open circuit. Generally, the chafing resulted in a progressive series of driver warnings with high levels of detectability over the course of several days and ignition cycles. Drivers usually heed warnings before an engine shutdown condition occurs and the driver may override an engine shutdown countdown timer using the override switch. If the driver allows the shutdown event to occur, the engine can almost always be immediately restarted. Incident rates for an engine shutdown with no warning or a transmission shift to neutral while driving are both very low. ODI received one complaint (NHTSA ID Number 11366557) from a fleet mechanic, who reported in a subsequent interview that he repaired at least six subject vehicles that experienced the alleged defect condition. However, there have been no new Vehicle Owner Questionnaire complaints received by ODI since opening this investigation, and there are no known crashes, fires or thermal events, or injuries or deaths related to the alleged defect. Accordingly, no safety-related defect trend has been identified. Based on available information, this investigation is closed.The closing of this investigation does not constitute a finding by NHTSA that a safety-related defect does not exist. The Agency reserves the right to take additional action if warranted by future circumstances. To review the ODI report cited in the Closing Resume ODI Report Identification Numbers document, go to NHTSA.gov.
Electrical System:wiring
The Office of Defects Investigation (ODI) opened this Preliminary Evaluation to investigate reports of engine electrical wiring harness chafe on the subject vehicles.ODI analysis found thousands of unique harness part numbers, spanning the two generations of vehicle chassis assembled at multiple vehicle assembly plants in two different countries, with multiple sub-models, incorporating over thirty powertrain choices.Each wiring harness could contain several dozen individual wires for power, ground and communication purposes depending on the multitude of equipment options available for custom vehicle configuration. ODI identified three primary areas where a wiring harness bundle may chafe: the air compressor support bracket, the transmission case, or the coolant surge tank. In each case, the root cause was some combination of inadequate design clearance, installation variability and relative motion between the wiring harness and the point of contact, such as from vibration. The chafing could result in a range of consequences from none to various diagnostic fault codes, telltale illumination, driver warning center messages, erratic electrical component operation, difficult or no engine start condition, engine de-rate (power reduction), engine shut down, inoperative transmission gear selection, or an unexpected shift to neutral.These potential consequences vary depending on the specific damaged wire in the harness and the exact failure mode, such as intermittent short circuit to ground or open circuit. Generally, the chafing resulted in a progressive series of driver warnings with high levels of detectability over the course of several days and ignition cycles. Drivers usually heed warnings before an engine shutdown condition occurs and the driver may override an engine shutdown countdown timer using the override switch. If the driver allows the shutdown event to occur, the engine can almost always be immediately restarted. Incident rates for an engine shutdown with no warning or a transmission shift to neutral while driving are both very low. ODI received one complaint (NHTSA ID Number 11366557) from a fleet mechanic, who reported in a subsequent interview that he repaired at least six subject vehicles that experienced the alleged defect condition. However, there have been no new Vehicle Owner Questionnaire complaints received by ODI since opening this investigation, and there are no known crashes, fires or thermal events, or injuries or deaths related to the alleged defect. Accordingly, no safety-related defect trend has been identified. Based on available information, this investigation is closed.The closing of this investigation does not constitute a finding by NHTSA that a safety-related defect does not exist. The Agency reserves the right to take additional action if warranted by future circumstances. To review the ODI report cited in the Closing Resume ODI Report Identification Numbers document, go to NHTSA.gov.
Electrical System:wiring:front Underhood
The Office of Defects Investigation (ODI) opened this Preliminary Evaluation to investigate reports of engine electrical wiring harness chafe on the subject vehicles.ODI analysis found thousands of unique harness part numbers, spanning the two generations of vehicle chassis assembled at multiple vehicle assembly plants in two different countries, with multiple sub-models, incorporating over thirty powertrain choices.Each wiring harness could contain several dozen individual wires for power, ground and communication purposes depending on the multitude of equipment options available for custom vehicle configuration. ODI identified three primary areas where a wiring harness bundle may chafe: the air compressor support bracket, the transmission case, or the coolant surge tank. In each case, the root cause was some combination of inadequate design clearance, installation variability and relative motion between the wiring harness and the point of contact, such as from vibration. The chafing could result in a range of consequences from none to various diagnostic fault codes, telltale illumination, driver warning center messages, erratic electrical component operation, difficult or no engine start condition, engine de-rate (power reduction), engine shut down, inoperative transmission gear selection, or an unexpected shift to neutral.These potential consequences vary depending on the specific damaged wire in the harness and the exact failure mode, such as intermittent short circuit to ground or open circuit. Generally, the chafing resulted in a progressive series of driver warnings with high levels of detectability over the course of several days and ignition cycles. Drivers usually heed warnings before an engine shutdown condition occurs and the driver may override an engine shutdown countdown timer using the override switch. If the driver allows the shutdown event to occur, the engine can almost always be immediately restarted. Incident rates for an engine shutdown with no warning or a transmission shift to neutral while driving are both very low. ODI received one complaint (NHTSA ID Number 11366557) from a fleet mechanic, who reported in a subsequent interview that he repaired at least six subject vehicles that experienced the alleged defect condition. However, there have been no new Vehicle Owner Questionnaire complaints received by ODI since opening this investigation, and there are no known crashes, fires or thermal events, or injuries or deaths related to the alleged defect. Accordingly, no safety-related defect trend has been identified. Based on available information, this investigation is closed.The closing of this investigation does not constitute a finding by NHTSA that a safety-related defect does not exist. The Agency reserves the right to take additional action if warranted by future circumstances. To review the ODI report cited in the Closing Resume ODI Report Identification Numbers document, go to NHTSA.gov.
Engine And Engine Cooling
The Office of Defects Investigation (ODI) opened this Preliminary Evaluation to investigate reports of engine electrical wiring harness chafe on the subject vehicles.ODI analysis found thousands of unique harness part numbers, spanning the two generations of vehicle chassis assembled at multiple vehicle assembly plants in two different countries, with multiple sub-models, incorporating over thirty powertrain choices.Each wiring harness could contain several dozen individual wires for power, ground and communication purposes depending on the multitude of equipment options available for custom vehicle configuration. ODI identified three primary areas where a wiring harness bundle may chafe: the air compressor support bracket, the transmission case, or the coolant surge tank. In each case, the root cause was some combination of inadequate design clearance, installation variability and relative motion between the wiring harness and the point of contact, such as from vibration. The chafing could result in a range of consequences from none to various diagnostic fault codes, telltale illumination, driver warning center messages, erratic electrical component operation, difficult or no engine start condition, engine de-rate (power reduction), engine shut down, inoperative transmission gear selection, or an unexpected shift to neutral.These potential consequences vary depending on the specific damaged wire in the harness and the exact failure mode, such as intermittent short circuit to ground or open circuit. Generally, the chafing resulted in a progressive series of driver warnings with high levels of detectability over the course of several days and ignition cycles. Drivers usually heed warnings before an engine shutdown condition occurs and the driver may override an engine shutdown countdown timer using the override switch. If the driver allows the shutdown event to occur, the engine can almost always be immediately restarted. Incident rates for an engine shutdown with no warning or a transmission shift to neutral while driving are both very low. ODI received one complaint (NHTSA ID Number 11366557) from a fleet mechanic, who reported in a subsequent interview that he repaired at least six subject vehicles that experienced the alleged defect condition. However, there have been no new Vehicle Owner Questionnaire complaints received by ODI since opening this investigation, and there are no known crashes, fires or thermal events, or injuries or deaths related to the alleged defect. Accordingly, no safety-related defect trend has been identified. Based on available information, this investigation is closed.The closing of this investigation does not constitute a finding by NHTSA that a safety-related defect does not exist. The Agency reserves the right to take additional action if warranted by future circumstances. To review the ODI report cited in the Closing Resume ODI Report Identification Numbers document, go to NHTSA.gov.
Engine And Engine Cooling:engine
The Office of Defects Investigation (ODI) opened this Preliminary Evaluation to investigate reports of engine electrical wiring harness chafe on the subject vehicles.ODI analysis found thousands of unique harness part numbers, spanning the two generations of vehicle chassis assembled at multiple vehicle assembly plants in two different countries, with multiple sub-models, incorporating over thirty powertrain choices.Each wiring harness could contain several dozen individual wires for power, ground and communication purposes depending on the multitude of equipment options available for custom vehicle configuration. ODI identified three primary areas where a wiring harness bundle may chafe: the air compressor support bracket, the transmission case, or the coolant surge tank. In each case, the root cause was some combination of inadequate design clearance, installation variability and relative motion between the wiring harness and the point of contact, such as from vibration. The chafing could result in a range of consequences from none to various diagnostic fault codes, telltale illumination, driver warning center messages, erratic electrical component operation, difficult or no engine start condition, engine de-rate (power reduction), engine shut down, inoperative transmission gear selection, or an unexpected shift to neutral.These potential consequences vary depending on the specific damaged wire in the harness and the exact failure mode, such as intermittent short circuit to ground or open circuit. Generally, the chafing resulted in a progressive series of driver warnings with high levels of detectability over the course of several days and ignition cycles. Drivers usually heed warnings before an engine shutdown condition occurs and the driver may override an engine shutdown countdown timer using the override switch. If the driver allows the shutdown event to occur, the engine can almost always be immediately restarted. Incident rates for an engine shutdown with no warning or a transmission shift to neutral while driving are both very low. ODI received one complaint (NHTSA ID Number 11366557) from a fleet mechanic, who reported in a subsequent interview that he repaired at least six subject vehicles that experienced the alleged defect condition. However, there have been no new Vehicle Owner Questionnaire complaints received by ODI since opening this investigation, and there are no known crashes, fires or thermal events, or injuries or deaths related to the alleged defect. Accordingly, no safety-related defect trend has been identified. Based on available information, this investigation is closed.The closing of this investigation does not constitute a finding by NHTSA that a safety-related defect does not exist. The Agency reserves the right to take additional action if warranted by future circumstances. To review the ODI report cited in the Closing Resume ODI Report Identification Numbers document, go to NHTSA.gov.
Engine And Engine Cooling:engine:diesel
The Office of Defects Investigation (ODI) opened this Preliminary Evaluation to investigate reports of engine electrical wiring harness chafe on the subject vehicles.ODI analysis found thousands of unique harness part numbers, spanning the two generations of vehicle chassis assembled at multiple vehicle assembly plants in two different countries, with multiple sub-models, incorporating over thirty powertrain choices.Each wiring harness could contain several dozen individual wires for power, ground and communication purposes depending on the multitude of equipment options available for custom vehicle configuration. ODI identified three primary areas where a wiring harness bundle may chafe: the air compressor support bracket, the transmission case, or the coolant surge tank. In each case, the root cause was some combination of inadequate design clearance, installation variability and relative motion between the wiring harness and the point of contact, such as from vibration. The chafing could result in a range of consequences from none to various diagnostic fault codes, telltale illumination, driver warning center messages, erratic electrical component operation, difficult or no engine start condition, engine de-rate (power reduction), engine shut down, inoperative transmission gear selection, or an unexpected shift to neutral.These potential consequences vary depending on the specific damaged wire in the harness and the exact failure mode, such as intermittent short circuit to ground or open circuit. Generally, the chafing resulted in a progressive series of driver warnings with high levels of detectability over the course of several days and ignition cycles. Drivers usually heed warnings before an engine shutdown condition occurs and the driver may override an engine shutdown countdown timer using the override switch. If the driver allows the shutdown event to occur, the engine can almost always be immediately restarted. Incident rates for an engine shutdown with no warning or a transmission shift to neutral while driving are both very low. ODI received one complaint (NHTSA ID Number 11366557) from a fleet mechanic, who reported in a subsequent interview that he repaired at least six subject vehicles that experienced the alleged defect condition. However, there have been no new Vehicle Owner Questionnaire complaints received by ODI since opening this investigation, and there are no known crashes, fires or thermal events, or injuries or deaths related to the alleged defect. Accordingly, no safety-related defect trend has been identified. Based on available information, this investigation is closed.The closing of this investigation does not constitute a finding by NHTSA that a safety-related defect does not exist. The Agency reserves the right to take additional action if warranted by future circumstances. To review the ODI report cited in the Closing Resume ODI Report Identification Numbers document, go to NHTSA.gov.
Engine And Engine Cooling:engine:engine Control Module (ecu/ecm)
The Office of Defects Investigation (ODI) opened this Preliminary Evaluation to investigate reports of engine electrical wiring harness chafe on the subject vehicles.ODI analysis found thousands of unique harness part numbers, spanning the two generations of vehicle chassis assembled at multiple vehicle assembly plants in two different countries, with multiple sub-models, incorporating over thirty powertrain choices.Each wiring harness could contain several dozen individual wires for power, ground and communication purposes depending on the multitude of equipment options available for custom vehicle configuration. ODI identified three primary areas where a wiring harness bundle may chafe: the air compressor support bracket, the transmission case, or the coolant surge tank. In each case, the root cause was some combination of inadequate design clearance, installation variability and relative motion between the wiring harness and the point of contact, such as from vibration. The chafing could result in a range of consequences from none to various diagnostic fault codes, telltale illumination, driver warning center messages, erratic electrical component operation, difficult or no engine start condition, engine de-rate (power reduction), engine shut down, inoperative transmission gear selection, or an unexpected shift to neutral.These potential consequences vary depending on the specific damaged wire in the harness and the exact failure mode, such as intermittent short circuit to ground or open circuit. Generally, the chafing resulted in a progressive series of driver warnings with high levels of detectability over the course of several days and ignition cycles. Drivers usually heed warnings before an engine shutdown condition occurs and the driver may override an engine shutdown countdown timer using the override switch. If the driver allows the shutdown event to occur, the engine can almost always be immediately restarted. Incident rates for an engine shutdown with no warning or a transmission shift to neutral while driving are both very low. ODI received one complaint (NHTSA ID Number 11366557) from a fleet mechanic, who reported in a subsequent interview that he repaired at least six subject vehicles that experienced the alleged defect condition. However, there have been no new Vehicle Owner Questionnaire complaints received by ODI since opening this investigation, and there are no known crashes, fires or thermal events, or injuries or deaths related to the alleged defect. Accordingly, no safety-related defect trend has been identified. Based on available information, this investigation is closed.The closing of this investigation does not constitute a finding by NHTSA that a safety-related defect does not exist. The Agency reserves the right to take additional action if warranted by future circumstances. To review the ODI report cited in the Closing Resume ODI Report Identification Numbers document, go to NHTSA.gov.
Engine
The Office of Defects Investigation (ODI) opened this Preliminary Evaluation to investigate reports of engine electrical wiring harness chafe on the subject vehicles.ODI analysis found thousands of unique harness part numbers, spanning the two generations of vehicle chassis assembled at multiple vehicle assembly plants in two different countries, with multiple sub-models, incorporating over thirty powertrain choices.Each wiring harness could contain several dozen individual wires for power, ground and communication purposes depending on the multitude of equipment options available for custom vehicle configuration. ODI identified three primary areas where a wiring harness bundle may chafe: the air compressor support bracket, the transmission case, or the coolant surge tank. In each case, the root cause was some combination of inadequate design clearance, installation variability and relative motion between the wiring harness and the point of contact, such as from vibration. The chafing could result in a range of consequences from none to various diagnostic fault codes, telltale illumination, driver warning center messages, erratic electrical component operation, difficult or no engine start condition, engine de-rate (power reduction), engine shut down, inoperative transmission gear selection, or an unexpected shift to neutral.These potential consequences vary depending on the specific damaged wire in the harness and the exact failure mode, such as intermittent short circuit to ground or open circuit. Generally, the chafing resulted in a progressive series of driver warnings with high levels of detectability over the course of several days and ignition cycles. Drivers usually heed warnings before an engine shutdown condition occurs and the driver may override an engine shutdown countdown timer using the override switch. If the driver allows the shutdown event to occur, the engine can almost always be immediately restarted. Incident rates for an engine shutdown with no warning or a transmission shift to neutral while driving are both very low. ODI received one complaint (NHTSA ID Number 11366557) from a fleet mechanic, who reported in a subsequent interview that he repaired at least six subject vehicles that experienced the alleged defect condition. However, there have been no new Vehicle Owner Questionnaire complaints received by ODI since opening this investigation, and there are no known crashes, fires or thermal events, or injuries or deaths related to the alleged defect. Accordingly, no safety-related defect trend has been identified. Based on available information, this investigation is closed.The closing of this investigation does not constitute a finding by NHTSA that a safety-related defect does not exist. The Agency reserves the right to take additional action if warranted by future circumstances. To review the ODI report cited in the Closing Resume ODI Report Identification Numbers document, go to NHTSA.gov.
PE21006 · Halogen Headlights May Cause Fires
Opened Feb 25, 2021 · Closed Jul 16, 2021
Status: closed (inferred from source dates) · Exterior Lighting:headlights
In its process for evaluating Early Warning Reporting data, the Office of Defects Investigation (ODI) found twenty-four (24) field reports involving headlight fires on Freightliner Cascadia trucks, model years 2017 and newer produced by the vehicle manufacturer, Daimler Trucks North America (DTNA). ODI contacted DTNA and learned that it was aware of halogen bulb-related thermal events. DTNA stated a belief that the issue was due to incorrect bulb replacement during maintenance. However, some vehicles experienced fires within the original equipment halogen bulb's expected life range.In July 2019, DTNA released a service bulletin and a training video covering proper headlight bulb replacement. There have been 17 fires, with 3 total vehicle losses, since DTNA released this extra training information.On February 25, 2021, ODI opened a Preliminary Evaluation (PE21-006) and sent an Information Request (IR) letter to DTNA.After the PE opening, DTNA reevaluated the data and found additional thermal events at low mileages and decided to file a recall. On May 14, 2021, DTNA submitted recall 21V-357 for 72,508 vehicles covering 2017-2022 models (exceeding the population and model years of this investigation). The planned owner and dealer notification date is July 12, 2021.For the remedy, DTNA will open up the 2-inch access into a 4-inch access hole into the inner fender to provide better access for the maintenance replacement of the bulb, and add a label that provides a visible warning to aid in the correct installation during the change. Additionally, a new foam grommet will replace the flammable rubber boots for both the high and low beam bulbs, improving access to the interface point where the bulbs install into the socket of the reflector. ODI believes that the scope of DTNA recall 21V-357 is sufficient, and accordingly, PE21-006 is closed. The closing of this investigation does not constitute a finding by NHTSA that a safety-related defect does not exist on other models or MY vehicles outside of the recall scope. The agency reserves the right to take further action if warranted by the circumstances.
RQ20001 · Sam Cab Water Intrusion
Opened Aug 31, 2020 · Closed Jun 26, 2025
Status: closed (inferred from source dates) · Electrical System; Electrical System:wiring:fuses And Circuit Breakers
On August 31, 2020, the Office of Defects Investigation (ODI) opened a recall query, RQ20001, to investigate the allegations of water intrusion into the truck cab signal-detect and activation module (SAM cab).The investigation further evaluated the effectiveness of the original recall remedy, and the installation of an updated drip shield as it relates to continual water intrusion resulting in the loss of electrical functions and potential fire.The potential hazard was the increased risk of a crash and injury in certain model year (MY) 2007-2021 Freightliner Cascadia P3 vehicles manufactured by Daimler Trucks North America (DTNA). ODI sent DTNA an information request (IR) letter on September 29, 2020.DTNA's November 20, 2020, IR response detailed how the company had implemented various improvements through recall 09V024 and multiple technical service bulletins (TSBs) to mitigate water intrusion.The effectiveness of new windshield seals and revisions to the drip shield is evident by the downward trend in claims rate from an average high of 7.64% in the beginning product life of Cascadia P3 (MYs 2007-2009), to 1.79% average for MYs 2011-2018, and down to 0.49% towards the end of the Cascadia P3 production.Moreover, the data shows that most failures occurred within the first three years of service with a significant downward trend thereafter. In view of the current overall low failure rate, the nature of early-life failure, and failure rate trending downward since model year 2017, this Recall Query (RQ) is closed. The Agency reserves the right to take additional action if warranted by future circumstances. To review the ODI reports cited in the Closing Resume ODI Report Identification Number document, go to NHTSA.gov.
Additional source detail variants (2)
Electrical System
On August 31, 2020, the Office of Defects Investigation (ODI) opened a recall query, RQ20001, to investigate the allegations of water intrusion into the truck cab signal-detect and activation module (SAM cab).The investigation further evaluated the effectiveness of the original recall remedy, and the installation of an updated drip shield as it relates to continual water intrusion resulting in the loss of electrical functions and potential fire.The potential hazard was the increased risk of a crash and injury in certain model year (MY) 2007-2021 Freightliner Cascadia P3 vehicles manufactured by Daimler Trucks North America (DTNA). ODI sent DTNA an information request (IR) letter on September 29, 2020.DTNA's November 20, 2020, IR response detailed how the company had implemented various improvements through recall 09V024 and multiple technical service bulletins (TSBs) to mitigate water intrusion.The effectiveness of new windshield seals and revisions to the drip shield is evident by the downward trend in claims rate from an average high of 7.64% in the beginning product life of Cascadia P3 (MYs 2007-2009), to 1.79% average for MYs 2011-2018, and down to 0.49% towards the end of the Cascadia P3 production.Moreover, the data shows that most failures occurred within the first three years of service with a significant downward trend thereafter. In view of the current overall low failure rate, the nature of early-life failure, and failure rate trending downward since model year 2017, this Recall Query (RQ) is closed. The Agency reserves the right to take additional action if warranted by future circumstances. To review the ODI reports cited in the Closing Resume ODI Report Identification Number document, go to NHTSA.gov.
Electrical System:wiring:fuses And Circuit Breakers
On August 31, 2020, the Office of Defects Investigation (ODI) opened a recall query, RQ20001, to investigate the allegations of water intrusion into the truck cab signal-detect and activation module (SAM cab).The investigation further evaluated the effectiveness of the original recall remedy, and the installation of an updated drip shield as it relates to continual water intrusion resulting in the loss of electrical functions and potential fire.The potential hazard was the increased risk of a crash and injury in certain model year (MY) 2007-2021 Freightliner Cascadia P3 vehicles manufactured by Daimler Trucks North America (DTNA). ODI sent DTNA an information request (IR) letter on September 29, 2020.DTNA's November 20, 2020, IR response detailed how the company had implemented various improvements through recall 09V024 and multiple technical service bulletins (TSBs) to mitigate water intrusion.The effectiveness of new windshield seals and revisions to the drip shield is evident by the downward trend in claims rate from an average high of 7.64% in the beginning product life of Cascadia P3 (MYs 2007-2009), to 1.79% average for MYs 2011-2018, and down to 0.49% towards the end of the Cascadia P3 production.Moreover, the data shows that most failures occurred within the first three years of service with a significant downward trend thereafter. In view of the current overall low failure rate, the nature of early-life failure, and failure rate trending downward since model year 2017, this Recall Query (RQ) is closed. The Agency reserves the right to take additional action if warranted by future circumstances. To review the ODI reports cited in the Closing Resume ODI Report Identification Number document, go to NHTSA.gov.