2019 Ford Ranger

Rear leaf spring failure at the front mounting point. This happened while the bed was empty and under normal driving conditions. The dealer would not say if this part would be replaced due to a defect because the vehicle was past the manufacture warranty. I will replace the part myself due to how long the dealer said it would take to schedule me for an appointment as I can not go without a vehicle for more than a month.

The contact owns a 2019 Ford Ranger. The contact stated while driving 10 MPH in the driveway and depressing the brake pedal to make a turn, the vehicle lunged forward and accelerated unintendedly. The contact stated that upon depressing the brake pedal, the vehicle failed to respond. The contact continuously depressed the brake pedal until the vehicle responded as needed. There was no warning light illuminated. The dealer was notified of the failure and informed the contact that the VIN was not included in a related recall. The contact stated while her husband was in the process of parking the vehicle in the driveway, the contact's husband depressed the accelerator pedal to drive forward, and the failure recurred, causing the vehicle to crash into two other unoccupied vehicles that were parked in the driveway. The air bags did not deploy. There was no injury sustained. No police report was filed. There was no property damage. The dealer was notified of the failure. The vehicle was not diagnosed or repaired. The manufacturer was notified of the failure, but no assistance was provided. The failure mileage was approximately 11,055.

The contact owns a 2019 Ford Ranger. The contact stated that the temperature failed to adjust as needed. The contact stated that the damper was stuck. The heater was continuously blowing out hot air on the driver's side. There were no warning lights illuminated. The contact stated that the failure was related to NHTSA Campaign Number: 19V726000 (Visibility). The local dealer was not contacted. The vehicle was not diagnosed or repaired. The manufacturer was contacted, and opened a case, and referred the contact to the NHTSA Hotline. The failure mileage was approximately 25,152.

At 68k miles and one month past the 5 year warranty, the CDF drum broke off causing metal to fly loose in the transmission/ creating etchings in the transmission. The entire transmission needed to be replaced because of loss of pressure in the transmission. The vehicle was attempting to shift into first and second gear driving at 80mph.

The contact owns a 2019 Ford Ranger. The contact stated that while driving at various speeds, the vehicle jerked forward while slightly depressing the accelerator pedal. There was no warning light illuminated. In addition, the transmission was shifting hard while shifting from first through third gear. The vehicle was taken to an independent mechanic to be diagnosed; however, the contact was informed that no fault codes were retrieved. The manufacturer was notified of the failure and the contact was referred to a local dealer for assistance. The vehicle was not repaired. The failure mileage was approximately 100,000.

Once the "Maintenace Required" message is displayed on the "multi-information display" (shortly prior to standard maintenance intervals), it is permanently displayed . Once the message is displayed, "meter control switches" no longer function (until reset by dealer maintenance). Enabling any ADAS feature (if not enabled) is impossible as this requires using the "meter control switches." While stopped (or not), resetting the "message indicating maintenance" procedure in the user manual does not work (page 447 in [XXX] ) as it requires functional "meter control switches": ■Resetting the message indicating maintenance is required After the required maintenance is performed according to the maintenance schedule, please reset the reminder light or message. To reset the reminder light or message, follow the procedure described below: 1 Press or of the meter control switches and select on the multi-information display. 2 Press or of the meter control switches and select “Vehicle Settings”. Then press and hold . 3 Press or of the meter control switches and select “Scheduled Maintenance”. Then press . 4 Select “Yes” and press . INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

The 10R80 10 speed transmission in my truck has failed, due to the steel to aluminum drum being different materials it cause pre mature catastrophic failure. the damaged components resulted in needing a full overhaul/rebuild of my transmission at my full expense. my ford dealer stated there is a known tech service bulletin about this exact failure which means ford knows there's a problem but will not fix it. the resulting damage was the sun gear has failed, the drum has failed, and there are chunks missing from gears 5,6 and 7, which also resulted in needing a new valve body, and new torque converter. i opted to take my ranger to a independent shop as i no longer trusted ford to rebuild the transmission correctly and i do also have the failed components. The safety issues were losing all drive train function randomly when in operation, on several occasions this happened on the freeway at freeway speeds, or sitting in stop and go traffic and the the truck would just rev but not go anywhere, both scenarios have happened with my kids in the vehicle putting there lives in danger. Yes the problem has been confirmed by both the ford dealer and the independent transmission shop. yes i brought the parts to the ford dealer to look at, but they do remain in my possession. no, there were lights or indicators that a failure was happening, ive done all the ford recommended maintenance at the time it was due, the hard shift had always been there but i was told that's just how it was on multiple occasions. this is a known issue and i have spoken with several other 2019-2023 ford ranger owners and majority have had the exact same issues occur.

When turning on to another road and accelerating, engine will suddenly loose all power. releasing accelerator will regain some power until vehicle speed increases. Throttle control is often erratic and transmission shifting is inconsistent resulting in hard clunks during shift. Pulling into traffic with a sudden loss of power leaves me vulnerable to a collision.

In my 2019 Ford Ranger, which has 75,570 miles, on [XXX], I was at a stop sign on [XXX] , at [XXX] , near Statesboro, GA, waiting for a break in traffic to safely cross. When a safe break occurred, I proceeded to cross, and at about the halfway point of crossing, the transmission bucked, and the truck began to slow to a halt. As a tractor trailer was bearing down on me broadside, the transmission jumped into gear, and I was able to proceed, and narrowly avoided a broadside collision. Afterward, the warning lamp indicated a powertrain malfunction (wrench) light. I took the truck to my local Autozone, where I used their OBD, and the test result fault was "Power Train System, P07F7-00, Gear 10 Incorrect Ratio". I have an appointment at Metter Ford to repair the issue on January 17th, 2025. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)