IllustrationSTEERING WHEEL COLLAPSED DURING HEAD ON COLLISION PINNING DRIVER IN VEHICLE FOR 1 HOUR AND 45 MINUTES, CAUSING DRIVER TO BLEED TO DEATH.*SD
1985 Ford Ltd
Owner reports · Recalls · Investigations
Limited comparison data
There is not enough comparable history to draw a useful model-year comparison.
About this comparison →How this year compares
Owner complaints by model year
Compare all Ltd years →Counts vary with age, sales and reporting. They are not failure rates.
What owners reported most
All reported categories
Tap a category to read its complaints. One report may name several components.
When problems were reported
Mileage at the reported incident
Limited mileage data: 0 of 17 reports include usable mileage. There isn’t enough coverage to show a useful chart.
NHTSA’s mileage field refers to the reported incident, not necessarily the filing date. This shows report counts, not the likelihood of a failure.
What to inspect
Issues worth paying extra attention to based on owner reports.
- Electrical System. Review the 8 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
- Seat Belts. Review the 3 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
- Engine And Engine Cooling. Review the 2 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
NHTSA owner reports · September 18, 2026 snapshot.
2 crash reports5 fire reports2 injury reports
Steering complaints
1 reportsOfficial recalls
285V077000 · Structure:frame And Members:underbody Shields
Jun 11, 1985
HEAT SHIELDS FOR THE CATALYTIC CONVERTER OUTLET PIPES WERE OMITTED DURING PRODUCTION. CONSEQUENCE OF DEFECT: AFTER SEVERE DUTY USE, SUCH AS HIGH SPEED PURSUIT, THE OUTLET PIPES BECOME VERY HOT AND COULD IGNITE CERTAIN TYPES OF GROUND COVER RESULTING IN A VEHICLE FIRE.
Consequence & remedy
Consequence: Not supplied
Remedy: INSTALL CATALYTIC CONVERTER OUTLET PIPE SHIELDS.
85V068000 · Service Brakes, Hydraulic:power Assist:vacuum
May 21, 1985
BRAKE BOOSTER REAR SHELLS MAY HAVE REDUCED WALL THICKNESSES WHICH COULD CAUSE THE SHELL TO BREAK. CONSEQUENCE OF DEFECT: REPEATED BRAKE USE COULD CAUSE THE SHELL TO CRACK AND THE BOOSTER ASSEMBLY TO COME APART. SERVICE BRAKES CAPABILITY WOULD BE TOTALLY LOST WITHOUT WARNING AND COULD RESULT IN AN ACCIDENT.
Consequence & remedy
Consequence: Not supplied
Remedy: INSPECT AND IF NECESSARY REPLACE THE POWER BRAKE BOOSTER ASSEMBLY.
Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗
NHTSA investigations
2PE87028 · Stalling
Opened May 1, 1987 · Closed Jan 21, 1988
Status: closed (inferred from source dates) · Electrical System
NO SAFETY DEFECT TREND HAS BEEN DETECTED.===
EA86010 · Seatback Failure
Opened Mar 26, 1986 · Closed Jul 28, 1989
Status: closed (inferred from source dates) · Seats
SUMMARY OF INFORMATION FROM MANUFACTURER:FORD BELIEVES THAT THE AL-LEGED DEFECT ONLY OCCURS IN A SMALL NUMBER OF THE SUBJECT VEHICLES ANDRECALLED ABOUT 195,732 1984 TEMPO/TOPAZ VEHICLES IN JUNE 1986.ANALYSIS: VEHICLES POTENTIALLY INVOLVED INCLUDE TEMPO/TOPAZ, ESCORT/LYNX/EXP, MUSTANG/CAPRI, LTD/MARQUIS, AND THUNDERBIRD/COUGAR.FORD SOLD ABOUT 110,000 REPLACEMENT MIO BOLTS, MAINLY FOR 1983 AND 1984MODELS. LOW CLAMPING FORCE APPEARS TO BE A LARGE PART OF THE PROBLEM.FORD INCREASED THE TORQUE REQUIREMENTS AND REQUIRED THE USE OF A MANUALTORQUE TOOL IN MARCH AND SEPTEMBER 1985 PRODUCTION CHANGES. 1987 MODELSWILL BE PRODUCED WITH A LONGER M10 BOLT AND A NUT TO INCREASE AND MAIN-TAIN CLAMPING FORCE. BOLTS WERE FORMERLY SELF TAPPING. REPORTS LISTEDABOVE SPECIFICALLY STATE THAT THE BOLT BROKE. NONE REFER SIMPLY TOSEAT BACK COLLAPSE ALONE.STATUS:FORD REPLY TO ODI IR DATED 2/2/87.FORD RECALLED 195,7321984 TEMPO/TOPAZ VEHICLES IN JUNE 1986 (86V-082). ANALYZING REPONSE,MONITORING CANADIAN PROGRESS. RESPONSE TO 4/6/87 LETTER TO FORDRECEIVED 7/15/87. WILL PROBABLY CLOSE AFTER CANADA COMPLETES THEIRACTIONS.===