2019 Ford Fusion

Yesterday, [XXX], I was driving my vehicle on [XXX] in rural Kansas, to drop my mother off at the airport, and my [XXX] daughter was in the vehicle. My vehicle's temperature went directly to warning status, and I was no longer able to accelerate. I immediately put my hazards on and tried to make my way to the nearest exit to ensure we were in a safe position. Ford knows that coolant intrusion is possible in the engine block. While discussing with Ford today on the phone from 11:07 AM until 11:34 AM, and being escalated to a supervisor, they said that nothing could be done on their end, and advised to contact NHTSA. The safety of myself and others was at risk because of the faulty manufacturing of the engine and coolant system, which they report is part of a customer satisfaction program, but this is a major safety concern because, in the event it was not midday and there were more vehicles on the road, there could have been an accident. Ford Customer Satisfaction Program 21N12 One-time repair for vehicles included in 19B37 This is a known issue Ford recognizes through their customer satisfaction program. They are unwilling to assist, although in 2022, I was under the mileage specifications included in the customer satisfaction program. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

The vehicle wheels and steering wheel bounce and shake when brakes are applied, regardless of the speed level; this felt like I am losing control of the vehicle and as if the wheels, and components of suspension or brake system will collapse all of the sudden. No warning lights came up in the dashboard. The vehicle was inspected by the dealership (Kearny Mesa Ford Service, 7303 Clairemont Mesa Blvd, San Diego, CA 92111) and they confirmed the problem, the problem still persisted after they performed checks and repairs, their response was "we are not sure what's causing the problem and we need more time to diagnose.".

The contact owns a 2019 Ford Fusion. The contact stated while driving at an undisclosed speed, the check engine warning light illuminated. The vehicle was taken to Auto Zone where it was connected to a diagnostic machine and failure codes retrieved indicated that the failure was cylinder failure and a coil pack. The contact was informed that the cylinders and coil pack needed to be replaced. The vehicle was repaired; however, the failure reoccurred. The vehicle was taken to an independent mechanic where it was diagnosed with cylinder and head gasket failure. The vehicle was not repaired. The vehicle was then taken to the dealer where it was diagnosed with engine failure. The contact was informed that the engine needed to be replaced. The vehicle was not repaired. The manufacturer was made aware of the failure and a case was filed. The contact was advised to take the vehicle to the dealer for diagnostic testing. The failure mileage was approximately 143,000.

The contact owns a 2019 Ford Fusion. The contact stated that upon start the vehicle, the engine was misfiring. There was no warning light illuminated. The vehicle was taken to a local dealer to be diagnosed, and the contact was informed that the head gasket was faulty and needed to be replaced. Additionally, the engine needed to be replaced due to coolant intrusion. The vehicle was not repaired. The manufacturer was notified of the failure. The approximate failure mileage was 108,000.

The contact owns a 2019 Ford Fusion. The contact stated while driving approximately 60 MPH, there was an abnormal rattling sound coming from the engine compartment. While the vehicle was stopped, the vehicle started shaking abnormally. On one occasion, while driving 10 MPH, the vehicle stalled. The vehicle was not able to be restarted and remained at the location for almost a week. The vehicle was then towed to the residence. The vehicle was taken to a dealer but was not diagnosed or repaired. The vehicle was then taken to an independent mechanic where it was diagnosed and determined that the flex plate was cracked and needed to be replaced. The vehicle was not repaired. The manufacturer was not notified of the failure. The failure mileage was approximately 101,000.

The contact owns a 2019 Ford Fusion. The contact stated that while operating the vehicle, the engine overheated with the check engine warning light illuminated. The vehicle was taken to the local mechanic who replaced the water pump however, the failure persisted. The cause of the failure was not yet determined, and the vehicle was not repaired. The manufacturer and local dealer were not notified of the failure. The failure mileage was 75,000.

My car is part of a recall with Ford Motor Company - customer satisfaction recall 21N12 - I HAVE A COOLANT LEAK WHICH CAN CAUSE FIRE, and dealership refuses to help because my VIN number doesn"t show up as being affected. However in a letter mailed out by Ford Motor Company it states my vehicle is in fact covered under the saftey recall.. original recall letter was for 2013-2028 ford fusion ecoboost engines. Ford mailed out another letter saying that some 2019 models will experience same issue due to having the same engine. Ford did not mail out letters to 2019 owners for this recall. according to the recall , my car was built at the same plant and same time. I need my VIN number somehow attached to this recall so my dealership can do what is right. Fryer Ford in Ahoskie, NC refuses to help and I do not want to risk driving something that can catch fire. Please tell me what I need to do or verify that my car is in fact part of this recall. Thank you for any assistance in this matter

The contact owns a 2019 Ford Fusion. The contact stated that the vehicle was shaking abnormally at start-up. The vehicle was taken to the dealer however, a cause for the issue was not found. The failure persisted, and the check engine warning light illuminated. The contact's husband replaced the spark plugs and ignition coils; however, several days later, the failure reoccurred, and the spark plugs, and ignition coils were replaced an additional three separate times due to the persistent failure. The vehicle was then taken to an independent mechanic where a diagnostic test indicated that there was coolant intrusion into cylinder #3. The manufacturer was notified of the failure and informed the contact that there were no recalls on the vehicle. The contact was then referred to the NHTSA Hotline to report the failure. The vehicle was not repaired. The failure mileage was approximately 94,000.

The contact owns a 2019 Ford Fusion. The contact stated that upon start of the vehicle, an "Engine Coolant Overtemperature" message appeared on the instrument panel and the Ford Mobile App. The contact attempted to drive the vehicle to an independent mechanic; however, the vehicle hesitated upon depression of the accelerator pedal. The contact drove the vehicle back to the residence and used a code reader to retrieve the "Cylinder Head Over Temperature" message. The contact's stepfather called the dealer and was informed hm that there was an undisclosed recall; however, the VIN was not included in the recall. The manufacturer was notified of the failure and the contact was referred to the NHTSA Hotline. The vehicle was not repaired. The failure mileage was unknown.

The contact’s daughter owns a 2019 Ford Fusion. The contact stated that when the vehicle was started, the check engine warning light illuminated. Additionally, the messages "Engine Overheated" and "Service Now” were displayed. The contact’s daughter attempted to drive the vehicle, but the vehicle had shifted into "LIMP Mode". The vehicle was pulled over into a parking lot and restarted, but the failure persisted. The vehicle was taken to the residence where a handheld diagnostic machine retrieved information that the cylinder head was over temperature. The vehicle was not diagnosed or repaired. The manufacturer was notified of the failure. The failure mileage was approximately 80,000.