2019 Ford Fusion

coolant intrusion in engine with less than 7 years of life and under 84k miles. wont replace engine with the program because it didnt get the pcm update beforehand. Never got a letter for it and my vin doesnt say im apart of the program even though my car was build in the time frame and plant that they had this coolant intrusion issue.

Ford 2.0L EcoBoost engine. 2017-2019 Fusion. Also, in 2 other Ford and Lincoln models. I bought 2019 Fusion used and car has just under 69000 miles. Due to a known engine defect there can be coolant intrusion into a cylinder. In my case #2 cylinder. See TSB # 22-2229 from Ford. Check engine light came on. took to dealer and replaced 1 ign coil and 4 spark plugs. Thought issue resolved until check engine light came back on. Returned to dealer and advise that engine needed replacement. If continued to operate engine could lock-up while driving thus creating a safety for myself and others on the highway. Ford knows of this defect caused by their design of the block.

The contact owns a 2019 Ford Fusion. The contact stated that while the vehicle was parked, the vehicle stalled. There were no warning lights illuminated. The contact took the vehicle to an independent mechanic, where it was diagnosed that the flex plate was loose. The vehicle was then towed to a dealer, where it was diagnosed with a cracked flex plate. The vehicle was repaired. The manufacturer was made aware of the failure, and a case was filed. The failure mileage was approximately 56,660.

The contact owns a 2019 Ford Fusion. The contact stated while driving at an undisclosed speed, the vehicle inadvertently lost motive power. The contact was able to pull over to the shoulder of the roadway, where the vehicle was able to be restarted. The check engine warning light was illuminated. The vehicle was taken to an independent mechanic, who determined there was coolant intrusion into cylinder #3, causing damage to the engine. The contact was informed that the engine needed to be replaced. The vehicle was not repaired. After investigating the failure, the contact related the failure to Customer Satisfaction Program: 21N12. The manufacturer was notified of the failure, a case was opened, and the contact was referred to the NHTSA Hotline for assistance. The failure mileage was 82,000.

The contact owns a 2019 Ford Fusion. The contact stated that while driving at an undisclosed speed, there was an engine misfire, with the check engine warning light illuminated. The vehicle was able to restart. The vehicle was taken to the dealer where it was diagnosed with coolant intrusion into the engine, which caused engine failure. The contact was informed that the engine needed to be replaced. The vehicle was not repaired. The manufacturer was made aware of the failure and referred the contact to the NHTSA Hotline for assistance. The approximate failure mileage was 108,831.

The contact owns a 2019 Ford Fusion. The contact stated that while starting the vehicle, there was a loud clanking noise coming from the engine compartment, with the check engine and transmission warning lights illuminated. The vehicle was able to restart. The vehicle was towed to the dealer, where it was diagnosed and determined that the flex plate had failed and needed to be replaced. The vehicle was not repaired. The manufacturer was made aware of the failure and referred the contact to the NHTSA Hotline for assistance. The failure mileage was approximately 126,000.

The failure occurred in the engine block or head gasket of the 2.0L EcoBoost engine, leading to coolant intrusion into the cylinders. Yes, the affected engine components were inspected by local dealer and confirmed long block issue. The safety of the driver and others was put at risk due to the potential for: Sudden engine misfire or stalling, which could lead to a loss of power while driving. White smoke from the exhaust reducing visibility for other drivers. Engine overheating, which could cause a breakdown in traffic or on highways. Yes, the problem has been reproduced and confirmed by a Ford dealer and/or independent service center through diagnostic tests, which identified coolant intrusion into the cylinders. The vehicle has been inspected by the manufacturer’s authorized dealer during diagnostic testing to confirm the issue. It has not been inspected by police or insurance representatives. Yes, warning lamps and other symptoms appeared prior to the failure, including: MIL (Check Engine Light) with DTCs such as P0300-P0304 White exhaust smoke, indicating coolant burning in the engine. Engine running rough, especially during cold starts. Low coolant level, requiring frequent refills, with no visible external leaks. These symptoms first appeared [insert time frame or mileage if known].

The contact owns a 2019 Ford Fusion. The contact stated that while driving approximately 30-35 MPH, the "Engine Coolant Overtemperature" message was displayed on the instrument panel. The accelerator was depressed and failed to respond as intended. The vehicle started losing motive power. The contact was able to coast to the side of the road. The contact inspected the vehicle and noticed that there was no coolant inside the reservoir. The contact added coolant to the vehicle. The vehicle was restarted, and the contact drove to the residence; however, the failure recurred, and the coolant reservoir was empty. The vehicle was taken to the dealer, and it was diagnosed and determined that the radiator had failed. The vehicle was repaired. The dealer diagnosed the vehicle again and confirmed coolant intrusion into the cylinders, causing engine failure. The contact was informed that the engine needed to be replaced. The vehicle was not repaired. The manufacturer was made aware of the failure and referred the contact to the NHSTA Hotline for assistance. The approximate failure mileage was approximately 38,500.