2017 Ford Fusion

The car started shaking while driving down the road and when coming to a stop. The gears were not shifting properly. I took it to a mechanic shop and they told me several different things "could" be wrong, supposedly fixed it, $700 for that. Started shaking and shift gear problems again, took it in again and spent $2800 for the supposed fix. Several days later same thing, took it back again and they said to take it to a transmission shop because they couldn't do anymore. Found out there was a recall on the torque and the different mechanic "fixed" that. Now it won't shift into several of the gears. Over $4500.00 spent! Transmission

Vehicle lost ability to drive forward & reverse on the freeway. Upon inspection, the torque converter had gone bad & contaminated the transmission fluid causing the transmission to go out. Now my vehicle needs a new torque converter & transmission. There was a recall "17V427000" but it did not include my vehicle; however, it looks like the same issue.

About 4 weeks ago my car lost the ability to move while driving. The wrench light popped up to see manual. Upon checking the manual it stated that the problem was with the power train. I took it to get looked at and the service center further confirmed that it was a piece inside the transmission. I see that there was a safety recall issued in 2017 for the power train torque converter for 2017 Ford Fusions. However, when I type in my VIN number the recall does not appear for my car. Is there a way for the recall to be issued for my car being that I drive the exact car type that was affected and am having the same problem?

The contact owns a 2017 Ford Fusion. The contact stated that while parking the vehicle, the vehicle stalled. Upon restarting the vehicle, the vehicle failed to move forward or reverse. The system default warning light was displayed. The contact called the local dealer and was informed that the vehicle was not covered under the recall. The manufacturer was notified of the failure and referred the contact to the NHTSA Hotline. The failure mileage was approximately 77,432.

2017 Ford Fusion 2.0L ecoboost engine is available for inspection. The engine block was designed incorrectly and coolant leaks into the cylinder. There is a risk of fire from the intrusion of coolant in the cylinder. Many other people are having this issue and they did recall the 1.5L engine. They need to on the 2.0L as well. My local mechanic identified the issue and I called the Ford dealer who didn't even need to see it said I need a new engine based off the mechanic's testing. After losing coolant and constantly refilling with no coolant being seen coming from the vehicle, the check engine light comes on. The code listed states that one of the cylinders is misfiring. This is due to coolant in the cylinder. With the risk of fire, Ford needs to put a recall on this issue for the 2.0L ecoboost.

The contact owns a 2017 Ford Fusion. The contact stated while accelerating from a complete stop, the vehicle shuddered and hesitated to respond. There was no warning light illuminated. The contact stated that the failure reoccurred while driving 60 MPH. The contact stated that the failure had been recurring while driving. The vehicle was taken to the dealer several times. The dealer diagnosed the vehicle, but the cause of the failure could not be determined. The contact stated that the failure persisted. The vehicle was taken back to the dealer, where it was diagnosed that the torque converter had failed and needed to be replaced. The vehicle was not repaired. The contact related the failure to NHTSA Campaign Number: 17V427000 (Power Train); however, the VIN was not included. The manufacturer was notified of the failure and a case was opened. The manufacturer referred the contact to the NHTSA Hotline for assistance. The failure mileage was approximately 106,000.

The contact owns a 2017 Ford Fusion. The contact stated while driving 75 MPH, the vehicle stalled without warning. The contact pulled over to the highway shoulder and the vehicle was initially towed to an independent mechanic. The contact was informed by the mechanic that the engine needed to be taken apart to determine the cause of the failure. The vehicle was then towed to a dealer where the contact was informed that the torque converter and the transmission needed to be repaired. The vehicle was towed for a third time to another independent mechanic where the contact was informed that the flex plate had fractured in five separate places and needed to be repaired also. The manufacturer was not made aware of the issue. The vehicle was not repaired. The failure mileage was approximately 107,510.

I was pulling onto the beltway and my car would not shift when I accelerated. Then the engine revved up when I accelerated and the car had no power. It remained in the same gear. Then it wouldn’t move at all. I was able to coast off the highway. Turned the car off and started again. It did the same thing. Staying in the gear and then not accelerating. I find it interesting that other 2017 ford fusion had a previous recall for this. My vin isn’t included on the list

The contact owns a 2017 Ford Fusion. The contact stated that while driving at an undisclosed speed, the vehicle inadvertently lost motive power. The contact was able to coast to the shoulder of the roadway, where the vehicle was able to be restarted, but failed to shift into drive. The check engine warning light was illuminated. The vehicle was towed to an independent mechanic, who was unable to diagnose the vehicle. The vehicle was then towed to the dealer, who diagnosed a failure with the torque converter. The vehicle was not repaired. After investigating the failure, the contact related the failure to NHTSA Campaign Number: 17V427000 (Power Train), but the VIN was not included. The manufacturer was notified of the failure but provided no assistance. The failure mileage was 84,000.