2017 Ford Fusion

The contact owns a 2017 Ford Fusion. The contact stated that while driving at an undisclosed speed, the check engine warning light illuminated. The contact took the vehicle to an independent mechanic to be diagnosed. The contact was informed that the spark plugs needed to be replaced. The spark plugs were replaced; however, the following day the check engine warning light illuminated again. The vehicle was taken to the dealer where it was diagnosed with coolant leaking into the engine, and the engine needed to be replaced. The vehicle was not repaired. The manufacturer was not made aware of the failure. The failure mileage was approximately 51,000.

The contact owns a 2017 Ford Fusion. The contact received notification of NHTSA Campaign Number: 23V162000 (Service Brakes, Hydraulic). The contact stated that while driving at an undisclosed speed, the electronic stability control (ESC) and check engine warning lights illuminated. The vehicle was taken to the dealer for the recall repair, and it was determined that rodents had chewed the soy-based ESC wiring harness. The contact was informed that the ESC wiring harness and purge solenoid valve needed to be replaced. The contact was also informed that the engine needed to be cleaned due to rodent droppings and that mothballs needed to be placed beneath the hood to deter rodents from entering the vehicle. The vehicle was not repaired. The manufacturer was not made aware of the failure. The failure mileage was 138,546.

The contact owns a 2017 Ford Fusion. The contact stated that coolant needed to added daily due to the message indicating that the engine was overheating. The contact stated that while inspecting the vehicle with a friend, it was concluded that there was an internal leak and that the engine might have experienced damages to the cylinders. The vehicle had not been taken to the dealer to be diagnosed or repaired. The manufacturer was made aware of the failure. The failure mileage was 33,950.

The contact owns a 2017 Ford Fusion. The contact stated that the vehicle had experienced rough start-ups. Additionally, while operating the vehicle, the check engine warning light remained illuminated. The contact stated that there was white smoke coming from the exhaust pipes, and it was discovered that the coolant reservoir was empty. The vehicle was taken to the local mechanic who diagnosed and determined that the engine had experienced coolant intrusion into the engine cylinders. The vehicle was not repaired. The manufacturer and local dealer were notified of the failure, but no assistance was provided. The failure mileage was 70,000.

The contact owns a 2017 Ford Fusion The contact stated while driving 45 MPH, the contact became aware that the defroster was not working properly on the vehicle. The contact stated that the windows were very foggy and made it very unsafe to drive. The check engine warning light was illuminated. The contact pulled the vehicle over to the side of the road and used the window scraper to remove the fog. The contact waited 20 to 25 minutes to restart the vehicle. The vehicle was taken to a dealer where it was diagnosed that the coolant was very low, and the check engine warning light was followed by DTC: PO302. The dealer referenced TSB: 22-229 (a 2-liter engine might need the long block to be replaced). The vehicle was not repaired. The manufacturer was notified of the failure and referred the contact to the NHSTA Hotline. The failure mileage was approximately 111,000.

The contact owns a 2017 Ford Fusion. The contact stated while driving at an undisclosed speed, the check engine warning light illuminated, and the temperature gauge displayed that the engine was overheating. The contact pulled over to the side of the road and inspected the vehicle for leaks, but none were found. The contact added coolant to the coolant reservoir and was able to restart the vehicle. The vehicle was taken to an independent mechanic, who performed a pressure test, but no leaks were found. The independent mechanic diagnosed that there was a misfire in cylinder #2. The vehicle was then taken to the dealer, where it was diagnosed with coolant intrusion into the engine and determined that the engine needed to be replaced. The vehicle was not repaired. The manufacturer was made aware of the failure and a case was opened. The contact was advised to take the vehicle to the dealer for a diagnosis. The contact related the failure to Customer Satisfaction Program: 21N12 (Short Block Replacement After Coolant Intrusion) and Technical Service Bulletin: 22-2229 (Coolant in Cylinders, White Exhaust Smoke And/or Illuminated MIL); however, the VIN was not included in the Customer Satisfaction Program and the vehicle was not covered under the TSB. The failure mileage was approximately 70,000.

While driving on the interstate car began to excessively shake and check engine light flashed for almost a minute then stopped. Was approaching exit to residence location and was able to get there. Once at home, car was then sluggish to start but no check engine light was on. Attempted to drive car in a safe area to see if it would repeat or light would come on. This was on a Sunday, therefore the dealership was closed. Light did come back on solidly and took car to dealership that next day, Monday. Was told coolant intrusion into the engine. After the incident and in doing research, appears to be a known issue in this vehicle.

The contact owns a 2017 Ford Fusion. The contact stated he was noticing oil spotting on his driveway. The contact stated that he also smelled the odor of motor oil in the passenger cabin when he used the air conditioning. The contact stated no warning light was illuminated. The contact had taken the vehicle to a local dealer, where it was diagnosed and determined that the oil pan and gasket needed to be replaced. The vehicle was repaired. The contact stated however that the leaking was again happening and returned two more times to the same dealer to have the failure repaired. The contact stated that on the last visit the oil pan, oil pan gasket, and valve covers were replaced. The vehicle was repaired. The manufacturer was informed of the failure. The contact had been informed by the dealer that the failure was related to the manufacturer Technical Service Bulletin: 23-2075 Oil Leak from Engine Oil Pan RTV Seal (Engine and Engine Cooling). The failure mileage was approximately 40,000.

The contact owns a 2017 Ford Fusion. The contact stated that while the vehicle was idling, the engine overheated. The check engine warning light was illuminated. The vehicle was taken to an independent mechanic, who informed the contact that the failure was due to the coolant overheating. The vehicle was running rough and there was smoke coming from the tailpipe. The contact stated that cylinders #1, #2, #3, and #4 had coolant intrusion. The mechanic recommended an engine long block replacement. The vehicle was not repaired. The vehicle was taken to the local dealer, where it was diagnosed that there was a coolant intrusion in the engine and cylinders #1, #2, #3, and #4. The manufacturer was contacted, and opened a case and referred the contact to the NHTSA Hotline. The approximate failure mileage was 78,769.