NHTSA owner reports · September 18, 2026 snapshot.
Service Brakes, Hydraulic complaints
17 reportsClear category filter59,000 miles · Apr 26, 2012
Service Brakes, Hydraulic
TL* THE CONTACT OWNS A 2008 FORD F150. THE CONTACT STATED THAT THE ACCELERATOR AND BRAKE PEDALS WERE POSITIONED TO CLOSE TO ONE ANOTHER. WHENEVER THE CONTACT DEPRESSED THE BRAKE PEDAL, HE ALSO UNINTENTIONALLY DEPRESSED THE ACCELERATOR PEDAL. THE DEALER WAS NOTIFIED AND STATED THAT THERE WERE NO RECALLS ADDRESSING THE FAILURE. TH…
Read full complaint
TL* THE CONTACT OWNS A 2008 FORD F150. THE CONTACT STATED THAT THE ACCELERATOR AND BRAKE PEDALS WERE POSITIONED TO CLOSE TO ONE ANOTHER. WHENEVER THE CONTACT DEPRESSED THE BRAKE PEDAL, HE ALSO UNINTENTIONALLY DEPRESSED THE ACCELERATOR PEDAL. THE DEALER WAS NOTIFIED AND STATED THAT THERE WERE NO RECALLS ADDRESSING THE FAILURE. THE MANUFACTURER WAS NOT NOTIFIED. THE FAILURE MILEAGE WAS 59,000.
NHTSA ODI #10456576
26,000 miles · Oct 18, 2011
Service Brakes, Hydraulic
ABS TONE RING BREAKAGE. *TR
NHTSA ODI #10430727
3,400 miles · Jul 6, 2011
Service Brakes, Hydraulic
TL* THE CONTACT OWNS A 2008 FORD F-150. THE CONTACT STATED THAT THE ACCELERATOR AND BRAKE PEDALS WERE EXTREMELY CLOSE TOGETHER AND ON NUMEROUS OCCASIONS, WOULD SIMULTANEOUSLY DEPRESS BOTH PEDALS. THE MANUFACTURER AND DEALER WERE CONTACTED AND EXPRESSED TO THE CONTACT THAT THEY WOULD CALL HIM BACK AT A LATER DATE. THE FAILURE W…
Read full complaint
TL* THE CONTACT OWNS A 2008 FORD F-150. THE CONTACT STATED THAT THE ACCELERATOR AND BRAKE PEDALS WERE EXTREMELY CLOSE TOGETHER AND ON NUMEROUS OCCASIONS, WOULD SIMULTANEOUSLY DEPRESS BOTH PEDALS. THE MANUFACTURER AND DEALER WERE CONTACTED AND EXPRESSED TO THE CONTACT THAT THEY WOULD CALL HIM BACK AT A LATER DATE. THE FAILURE WAS NOT REPAIRED. THE FAILURE MILEAGE WAS 3,400 AND THE CURRENT MILEAGE WAS 13,000. THE VIN WAS UNAVAILABLE. UPDATED 8/29/11 *CN
NHTSA ODI #10410725
3,000 miles · Jan 7, 2011
Service Brakes, Hydraulic
THIS SEEMS TO BE A DESIGN FLAW SAFETY PROBLEM. ON MY 2008 FORD F-150 PICK-UP TRUCK, THE BRAKE PEDAL IS MOUNTED TOO CLOSE TO THE GAS PEDAL. IF, DURING A "PANIC STOP" MY FOOT IS NOT PLACED IN THE MIDDLE OF THE BRAKE PEDAL, IT TENDS TO OVER LAP THE GAS PEDAL AND WHEN TRYING TO BRAKE, WILL ACTUALLY ACCELERATE THE TRUCK. THIS PROB…
Read full complaint
THIS SEEMS TO BE A DESIGN FLAW SAFETY PROBLEM. ON MY 2008 FORD F-150 PICK-UP TRUCK, THE BRAKE PEDAL IS MOUNTED TOO CLOSE TO THE GAS PEDAL. IF, DURING A "PANIC STOP" MY FOOT IS NOT PLACED IN THE MIDDLE OF THE BRAKE PEDAL, IT TENDS TO OVER LAP THE GAS PEDAL AND WHEN TRYING TO BRAKE, WILL ACTUALLY ACCELERATE THE TRUCK. THIS PROBLEM GETS WORSE AS THE VEHICLE'S BRAKES WEAR AND THE BRAKE PEDAL DEPRESSES EVEN FURTHER. I HAVE CONTACTED FORD AND THEY ADVISED ME TO CONTACT MY DEALER, WHICH I DID. THE DEALER TOLD ME THAT THEY ARE AWARE OF THIS PROBLEM BUT CAN DO NOTHING TO FIX IT SINCE FORD HAS NOT GIVEN THEM A FIX. THIS COULD E A VERY DANGEROUS PROBLEM, ESPECIALLY WHEN TOWING A HEAVY LOAD SUCH AS A TRAVEL TRAILER OR LARGE BOAT. I HAVE SEEN THIS PROBLEM ADDRESSED ON THIS SITE AND ALSO OTHER FORD TRUCK BLOG SITES.
NHTSA ODI #10376124
3,000 miles · Jan 7, 2011
Service Brakes, Hydraulic
I PURCHASED MY VEHICLE NEW IN 2008. I DISCOVERED WHAT SEEMS TO BE A DESIGN FLAW WITH THE BRAKE & GAS PEDALS. THEY ARE SPACED TOO CLOSE TOGETHER AND AT THE SAME LEVEL. WHEN PLACING MY FOOT ON THE BRAKE PEDAL IT SOMETIMES IS POSITIONED ON THE RIGHT AND OVERLAPS THE GAS PEDAL AND CAUSING THE VEHICLE TO ACCELERATE. THIS COULD PO…
Read full complaint
I PURCHASED MY VEHICLE NEW IN 2008. I DISCOVERED WHAT SEEMS TO BE A DESIGN FLAW WITH THE BRAKE & GAS PEDALS. THEY ARE SPACED TOO CLOSE TOGETHER AND AT THE SAME LEVEL. WHEN PLACING MY FOOT ON THE BRAKE PEDAL IT SOMETIMES IS POSITIONED ON THE RIGHT AND OVERLAPS THE GAS PEDAL AND CAUSING THE VEHICLE TO ACCELERATE. THIS COULD POSSIBLY BE A VERY DANGEROUS SITUATION, ESPECIALLY WHEN TOWING A HEAVY BOAT OR TRAVEL TRAILER. THIS PROBLEM GETS WORSE AS THE BRAKES WEAR AND THE BRAKE PEDAL HAS TO TRAVEL FURTHER DOWNWARD TOWARDS THE FLOOR. IN OTHER WORDS, THE GAS PEDAL IS ALSO FORCED FURTHER DOWNWARD. I HAVE HAD THIS HAPPEN ON MORE THAN ONE OCCASION. I CONTACTED FORD (CUSTOMER SERVICE DEPARTMENT) ABOUT THIS AND THEY ADVISED ME TO CONTACT MY DEALER, WHICH I DID. THE DEALER SAID THAT THEY WERE AWARE OF THE PROBLEM BUT COULD DO NOTHING AS FORD HAS NOT CONTACTED THEM WITH A FIX. I SEE ON YOUR WEB-SITE THAT THIS SITUATION HAS BEEN BROUGHT TO YOUR ATTENTION BY OTHER F-150 OWNERS.
NHTSA ODI #10376122
20,000 miles · Dec 1, 2010
Service Brakes, Hydraulic
WHEN DEPRESSING THE BRAKE PEDAL, IT MOVES LOWER THAN THE ACCELERATOR PEDAL. IF YOUR FOOT ISN'T SQUARELY ON THE BRAKE PEDAL, YOU CAN DEPRESS THE ACCELERATOR ACCIDENTALLY, RESULTING IN SUDDEN ACCELERATION. PUSHING HARDER ON THE BRAKES ONLY MAKES THE VEHICLE GO FASTER. *TR
NHTSA ODI #10368609
30,000 miles · Oct 17, 2010
Service Brakes, HydraulicCrash
MY 2008 FORD F150 BRAKE PEDAL DEPRESSES TOO FAR AND ALLOWS THE DRIVER TO INADVERTENTLY HIT THE GAS PEDAL AND THE BRAKE PEDAL SIMULTANEOUSLY. I HAVE HAD THE VEHICLE EXAMINED BY THE DEALER AND HAVE NOTIFIED FORD MOTOR COMPANY OF THIS PROBLEM. THEY HAVE ADVISED ME THAT THE BRAKES ARE WORKING PROPERLY. MY SON ALSO HAS A FORD F150 AN…
Read full complaint
MY 2008 FORD F150 BRAKE PEDAL DEPRESSES TOO FAR AND ALLOWS THE DRIVER TO INADVERTENTLY HIT THE GAS PEDAL AND THE BRAKE PEDAL SIMULTANEOUSLY. I HAVE HAD THE VEHICLE EXAMINED BY THE DEALER AND HAVE NOTIFIED FORD MOTOR COMPANY OF THIS PROBLEM. THEY HAVE ADVISED ME THAT THE BRAKES ARE WORKING PROPERLY. MY SON ALSO HAS A FORD F150 AND HIS HAS THE SAME PROBLEM. I BELIEVE THIS IS A SERIOUS DESIGN DEFECT WITH THESE VEHICLES AND IN MY CASE HAS CONTRIBUTED TO ONE ACCIDENT AND SEVERAL NEAR MISSES. I BELIEVE THIS PROBLEM WARRANTS FURTHER STUDY BY YOUR AGENCY. [XXX] INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6). *TR
NHTSA ODI #10360846
120 miles · Jun 10, 2010
Power TrainSeat BeltsService Brakes, Hydraulic
BRAKES FAILED ON 2 SEPARATE OCCASIONS FOR NO APPARENT REASON. RAN THRU 2 DIFFERENT INTERSECTIONS ...NO WET ROADS...NO WEATHER CONDITIONS...JUST FAILED TO STOP VEHICLE. *TR
NHTSA ODI #10335596
100 miles · Apr 28, 2010
Engine And Engine CoolingSeat BeltsService Brakes, Hydraulic
I HAVE A F-150 XLT TRITON FORD TRUCK. I HAVE HAD NUMEROUS ISSUES FROM : SEATBELTS NOT WORKING, ENGINE LIGHT, SOLENOID, 4WD LINKAGE, SHAKING AND BRAKES NOT WORKING, TO NOT ENGAGING INTO PARK OR DRIVE...I AM SO FRUSTRATED AND FORD WON'T DO ANYTHING. *TR
NHTSA ODI #10327888
14,300 miles · Jan 14, 2010
Service Brakes, Hydraulic
VEHICLE IS EXPERIENCING GRINDING NOISE COMING FROM THE FRONT DRIVER'S SIDE WHEEL. WHEN BRAKE IS APPLIED THE VEHICLE WILL SHUDDER TO A STOP FOLLOWED BY A LOUD BANG BEFORE COMPLETELY STOPPING. NOISE IS INTERMITTENT AND HAS OCCURRED IN ALL CONDITIONS AT ALL SPEEDS. NOISE IS ALSO MUCH LOUDER AT HIGHER SPEEDS AND WHEN WINDOW IS ROL…
Read full complaint
VEHICLE IS EXPERIENCING GRINDING NOISE COMING FROM THE FRONT DRIVER'S SIDE WHEEL. WHEN BRAKE IS APPLIED THE VEHICLE WILL SHUDDER TO A STOP FOLLOWED BY A LOUD BANG BEFORE COMPLETELY STOPPING. NOISE IS INTERMITTENT AND HAS OCCURRED IN ALL CONDITIONS AT ALL SPEEDS. NOISE IS ALSO MUCH LOUDER AT HIGHER SPEEDS AND WHEN WINDOW IS ROLLED DOWN. VEHICLE STARTED PROBLEM AT 14,000 MILES AND HAS CONTINUED EVER SINCE. VEHICLE WENT INTO THE FORD SERVICE 3 TIMES FOR TEST DRIVES, ONLY TO LEAVE WITH NO RESOLUTION SINCE TECHNICIANS COULD NOT DUPLICATE THE NOISE. ON THE FOURTH VISIT TECHNICIANS HEARD THE NOISE AND REPLACED THE FRONT DRIVER'S SIDE HUB ASSEMBLY. THEY COULD NOT FIND THE CAUSE OF THE HUB ENGAGING WHILE DRIVING. FOUR DAYS AFTER NEW HUB WAS INSTALLED THE TRUCK STARTED GRINDING THE HUB AGAIN. WENT IN FOR 5TH VISIT AND IS STILL IN THE SHOP WHILE THEY CONTINUE TO TEST DRIVE THE VEHICLE. I BELIEVE THIS PROBLEM TO BE DANGEROUS TO MYSELF AND OTHER DRIVERS BECAUSE THE NOISE IS SO LOUD THAT IT IS DISTRACTING TO THE DRIVER AND CAUSES OTHER DRIVERS ON THE ROAD TO WAVE AND FLAG DOWN MY VEHICLE TO ALERT ME TO THE NOISE. I ALSO BELIEVE THAT THE SHUDDERING THAT IS OCCURRING DURING BRAKING WHEN THIS GRINDING NOISE IS PRESENT COULD LEAD TO AN ACCIDENT IF CAUSE CANNOT BE FOUND. *TR
NHTSA ODI #10299742
Defect investigations
1PE08060 · Tire Valve Cracking
Opened Oct 14, 2008 · Closed Apr 9, 2009
Status: closed (inferred from source dates) · Tires:valve
ON OCTOBER 14, 2008, ODI OPENED PE08-060 TO INVESTIGATE ALLEGATIONS OF CRACKED AND LEAKING SNAP-IN TIRE VALVES IN MODEL YEAR (MY) 2007 VEHICLES MANUFACTURED BY FORD MOTOR COMPANY.THE VALVES WERE SUPPLIED TO FORD BY TOPSEAL AUTO-PARTS, A SUBSIDIARY OF THE SHANGHAI BAOLONG AUTOMOTIVE CORPORATION IN CHINA.VALVES MADE BY TOPSEAL FOR AFTERMARKET SALE WERE THE SUBJECT OF TWO RECENT SAFETY RECALLS BY TECH INTERNATIONAL (08T-018) AND DILL AIR CONTROLS (08T-028), THE LATTER OF WHICH WAS INVESTIGATED BY ODI IN PE08-036 AND EA08-022.THE DEFECT CONDITIONS ADDRESSED BY THE AFTERMARKET TIRE VALVE RECALLS BOTH INVOLVED INADEQUATE RESISTANCE TO OZONE CRACKING DUE TO ISSUES WITH THE SUPPLY OF ANTI-OZONANT CHEMICALS TO TOPSEAL FOR A PERIOD FROM JULY TO MID-NOVEMBER 2006.THE AFTERMARKET VALVES WERE COMPOUNDED WITH A BLEND OF EPDM AND NATURAL RUBBER, USING A RELATIVELY LOW PERCENTAGE OF EPDM (EPDM PROVIDES INHERENT RESISTANCE TO OZONE CRACKING).HENCE, THE NEED FOR ANTI-OZONANT CHEMICALS AND THE PROBLEMS WITH CRACKING WHEN THOSE CHEMICALS WERE MISSING OR OUT OF SPECIFICATION IN SOME LOTS OF VALVES.BOTH RECALL CAMPAIGNS INVOLVED INSPECTION PROGRAMS TO IDENTIFY AND REPLACE VALVES WITH VISIBLE SURFACE CRACKING.ALTHOUGH THE TOPSEAL VALVES SUPPLIED TO FORD ALSO APPEAR TO HAVE BEEN AFFECTED BY THE ANTI-OZONANT SUPPLY ISSUES IN MID TO LATE-2006, FORD INDICATED THAT ITS VALVES WERE MADE AT A DIFFERENT TOPSEAL PRODUCTION LINE AND WERE COMPOUNDED WITH A HIGHER PERCENTAGE OF EPDM RUBBER TO MEET MORE STRINGENT SPECIFICATIONS FROM FORD.ODI'S ANALYSIS OF COMPLAINT AND WARRANTY DATA PROVIDED BY FORD SHOWED THAT PROBLEMS WITH CRACKED TIRE VALVES WERE SIGNIFICANTLY HIGHER FOR MY 2007 VEHICLES PRODUCED FROM DECEMBER 2006 THROUGH MARCH 2007.FORD RESPONDED BY IMPLEMENTING CHANGES IN ITS MATERIAL SPECIFICATIONS FOR SNAP-IN RUBBER TIRE VALVES AND ALSO INCREASING THE QUALITY AND ACCEPTANCE STANDARDS FOR VALVES IMPORTED FOR USE IN ITS VEHICLES.WHILE THE COMPLAINT AND WARRANTY CLAIM RATES ARE ELEVATED FOR SUBJECT VEHICLES PRODUCED FROM DECEMBER 2006 THROUGH MARCH 2007, THE RATES OF LEAKING VALVES ARE WELL BELOW ONE PERCENT OF PRODUCTION FOR EACH OF THE PEAK MONTHS FOR ALL OF THE AFFECTED MODELS.A SUBSTANTIAL MAJORITY OF THE SUBJECT VEHICLES ARE EQUIPPED WITH TIRE PRESSURE MONITORING SYSTEMS (TPMS) WHICH WARN THE DRIVER WHEN ANY TIRE PRESSURES DROPS BELOW 25 PERCENT OF RECOMMENDED INFLATION PRESSURE. AS OUTLINED IN A LETTER TO ODI DATED APRIL 6, 2009, FORD HAS AGREED TO SEND LETTERS TO OWNERS OF CERTAIN MY 2007 AND 2008 FORD, LINCOLN AND MERCURY VEHICLES TO PROVIDE INFORMATION ABOUT THE CRACKING CONCERN. LETTERS WILL BE SENT TO OWNERS OF VEHICLES BUILT FROM NOVEMBER 2006 THROUGH MAY 2007.OWNERS CAN OPT FOR A FREE DEALER INSPECTION.VALVES EXHIBITING SURFACE CRACKS OR AIR LEAKAGE RELATED TO OZONE ATTACK WILL BE REPLACED BY FORD UNDER ITS NORMAL WARRANTY TERMS.FORD EXPECTS TO SEND THE LETTER BY APPROXIMATELY MID-MAY 2009. BASED ON THE USE OF TPMS IN THE MAJORITY OF SUBJECT VEHICLES AND THE RELATIVELY LOW RATES OF REPAIRS ASSOCIATED WITH LEAKING VALVES AND RESULTANT TIRE DAMAGE, ODI BELIEVES THAT THE ACTIONS FORD HAS AGREED TO TAKE WILL PROVIDE EFFECTIVE AND EXPEDITIOUS RESOLUTION FOR VEHICLES THAT WERE BUILT DURING THE PERIOD WHEN VALVES WITH INADEQUATE RESISTANCE TO OZONE CRACKING WERE MOST LIKELY TO HAVE BEEN USED IN VEHICLE PRODUCTION.FURTHER INVESTIGATION OF THIS MATTER WOULD NOT BE AN EFFICIENT ALLOCATION OF AGENCY RESOURCES.ACCORDINGLY, THIS INVESTIGATION IS CLOSED.THE CLOSING OF THIS INVESTIGATION DOES NOT CONSTITUTE A FINDING BY NHTSA THAT A SAFETY-RELATED DEFECT DOES NOT EXIST.THE AGENCY WILL CONTINUE TO
An investigation is not a finding of a defect, and closure does not prove a vehicle is problem-free.
Illustration