IllustrationMETAL SEAT FRAME BAR COMING THROUGH OUTSIDE OF DRIVERS SEAT.. I AM 5' 3" TALL, 125 LBS...NOT FROM OVER WEIGHT DRIVER.. VERY PROMINENT METAL BAR MAKES SEAT ALMOST IMPOSSIBLE TO SIT ON. LUMBAR SUPPORT DIDNT LAST 5 YEARS...SEAT DANGEROUS TO ANYONE SITTING ON IT.
2005 Ford Explorer
Owner reports · Recalls · Investigations
Similar to other model years
Owner complaints for the 2005 Ford Explorer do not stand out strongly from the model-year median of 609.
About this comparison →How this year compares
Owner complaints by model year
Compare all Explorer years →Counts vary with age, sales and reporting. They are not failure rates.
What owners reported most
All reported categories
Tap a category to read its complaints. One report may name several components.
When problems were reported
Mileage at the reported incident
420–25K
7425–50K
11450–75K
10275–100K
73100–150K
25150K+
430 reports with mileage · 67 unknown
NHTSA’s mileage field refers to the reported incident, not necessarily the filing date. This shows report counts, not the likelihood of a failure.
What to inspect
Issues worth paying extra attention to based on owner reports.
- Structure. Review the 151 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
- Power Train. Review the 99 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
- Vehicle Speed Control. Review the 44 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
NHTSA owner reports · September 18, 2026 snapshot.
22 crash reports6 fire reports13 injury reports
Seats complaints
3 reportsTHE ACTIVHEAT HEATED CAR SEAT COVER MODEL # 6HCSCBL24 WAS RECALLED BECAUSE THE SEAT COVER COULD OVERHEAT AND BURN ME. ON AUGUST 12, 2011 I MAILED IN MY REQUEST FOR A NEW SEAT COVER ALONG WITH A 3" X 5" SECTION OF THE FRONT MESH FABRIC OF THE SEAT COVER TO ACTIVHEAT SEAT RECALL, C/O ATLAS NORTH, PO BOX 873, WOODBURY, NJ 08096. TH…
Read full complaint
THE ACTIVHEAT HEATED CAR SEAT COVER MODEL # 6HCSCBL24 WAS RECALLED BECAUSE THE SEAT COVER COULD OVERHEAT AND BURN ME. ON AUGUST 12, 2011 I MAILED IN MY REQUEST FOR A NEW SEAT COVER ALONG WITH A 3" X 5" SECTION OF THE FRONT MESH FABRIC OF THE SEAT COVER TO ACTIVHEAT SEAT RECALL, C/O ATLAS NORTH, PO BOX 873, WOODBURY, NJ 08096. THE RECALL LETTER STATED THAT I WOULD RECEIVE THE NEW SEAT COVER IN 30 DAYS. IT HAS BEEN OVER 60 DAYS AND I HAVE NOT RECEIVED THE REPLACEMENT SEAT COVER. I HAVE CALLED 800-541-3722 TWICE TO INQUIRE ABOUT THE RECALL. THE ANSWERING SERVICE HAS TAKEN MY NAME AND PHONE # AND SAID THEY WOULD CALL ME. I HAVE NOT RECEIVED A CALL. PLEASE HELP ME OBTAIN THE NEW SEAT COVER.
TL*THE CONTACT OWNS A 2005 FORD EXPLORER. THE VEHICLE HAD BEEN PARKED FOR AN HOUR AND THEN CAUGHT FIRE. THERE WERE NO FLAMES, BUT THE PASSENGER COMPARTMENT WAS ENGULFED IN SMOKE. THE PASSENGER SEAT WAS ALMOST ENTIRELY BURNED. THE CONTACT BELIEVES THE FAILURE MAY HAVE BEEN CAUSED BY THE SEAT HEATER. THE VEHICLE IS CURRENTLY …
Read full complaint
TL*THE CONTACT OWNS A 2005 FORD EXPLORER. THE VEHICLE HAD BEEN PARKED FOR AN HOUR AND THEN CAUGHT FIRE. THERE WERE NO FLAMES, BUT THE PASSENGER COMPARTMENT WAS ENGULFED IN SMOKE. THE PASSENGER SEAT WAS ALMOST ENTIRELY BURNED. THE CONTACT BELIEVES THE FAILURE MAY HAVE BEEN CAUSED BY THE SEAT HEATER. THE VEHICLE IS CURRENTLY AT THE DEALER AND THE CAUSE OF FAILURE HAS NOT YET BEEN DETERMINED. THE CURRENT AND FAILURE MILEAGES WERE 36,000.
Official recalls
0No recalls in this snapshot.
Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗
NHTSA investigations
2EA09013 · Vehicle Rollaway Allegations
Opened Aug 18, 2009 · Closed Feb 12, 2013
Status: closed (inferred from source dates) · Power Train:automatic Transmission:gear Position Indication (prndl); Power Train:automatic Transmission:lever And Linkage:column Shift; Steering; Steering:column; Steering:column LOCKING:ANTI-THEFT Device
This investigation is being closed based on several considerations.By the most inclusive counting of all alleged rollaway incidents (i.e., counting all alleged rollaway incidents and assuming a singular failure mechanism), the incident rate is low, however during EA09-013, ODI identified a number of different failure mechanisms in 180 incidents related to the alleged defect.The highest rate for any particular failure mechanism, the failure of the Automatic Transmission Parking System, was 4.4/100K.The next-highest failure rate was for the BSI System, at 3.4/100K.For all identified failure mechanisms there has been a drastically declining trend including very few incidents occurring in recent years.Accordingly, this investigation is closed.The closing of this investigation does not constitute a finding by NHTSA that a safety-related defect does not exist.For additional information regarding this investigation, see the complete closing resume in the document file for EA09-013. The ODI reports cited above can be reviewed at www-odi.nhtsa.dot.gov/owners/SearchNHTSAID under the following identification (ODI) numbers:10168454, 10279630, 10280078.
Additional source detail variants (5)
Power Train:automatic Transmission:gear Position Indication (prndl)
This investigation is being closed based on several considerations.By the most inclusive counting of all alleged rollaway incidents (i.e., counting all alleged rollaway incidents and assuming a singular failure mechanism), the incident rate is low, however during EA09-013, ODI identified a number of different failure mechanisms in 180 incidents related to the alleged defect.The highest rate for any particular failure mechanism, the failure of the Automatic Transmission Parking System, was 4.4/100K.The next-highest failure rate was for the BSI System, at 3.4/100K.For all identified failure mechanisms there has been a drastically declining trend including very few incidents occurring in recent years.Accordingly, this investigation is closed.The closing of this investigation does not constitute a finding by NHTSA that a safety-related defect does not exist.For additional information regarding this investigation, see the complete closing resume in the document file for EA09-013. The ODI reports cited above can be reviewed at www-odi.nhtsa.dot.gov/owners/SearchNHTSAID under the following identification (ODI) numbers:10168454, 10279630, 10280078.
Power Train:automatic Transmission:lever And Linkage:column Shift
This investigation is being closed based on several considerations.By the most inclusive counting of all alleged rollaway incidents (i.e., counting all alleged rollaway incidents and assuming a singular failure mechanism), the incident rate is low, however during EA09-013, ODI identified a number of different failure mechanisms in 180 incidents related to the alleged defect.The highest rate for any particular failure mechanism, the failure of the Automatic Transmission Parking System, was 4.4/100K.The next-highest failure rate was for the BSI System, at 3.4/100K.For all identified failure mechanisms there has been a drastically declining trend including very few incidents occurring in recent years.Accordingly, this investigation is closed.The closing of this investigation does not constitute a finding by NHTSA that a safety-related defect does not exist.For additional information regarding this investigation, see the complete closing resume in the document file for EA09-013. The ODI reports cited above can be reviewed at www-odi.nhtsa.dot.gov/owners/SearchNHTSAID under the following identification (ODI) numbers:10168454, 10279630, 10280078.
Steering:column
This investigation is being closed based on several considerations.By the most inclusive counting of all alleged rollaway incidents (i.e., counting all alleged rollaway incidents and assuming a singular failure mechanism), the incident rate is low, however during EA09-013, ODI identified a number of different failure mechanisms in 180 incidents related to the alleged defect.The highest rate for any particular failure mechanism, the failure of the Automatic Transmission Parking System, was 4.4/100K.The next-highest failure rate was for the BSI System, at 3.4/100K.For all identified failure mechanisms there has been a drastically declining trend including very few incidents occurring in recent years.Accordingly, this investigation is closed.The closing of this investigation does not constitute a finding by NHTSA that a safety-related defect does not exist.For additional information regarding this investigation, see the complete closing resume in the document file for EA09-013. The ODI reports cited above can be reviewed at www-odi.nhtsa.dot.gov/owners/SearchNHTSAID under the following identification (ODI) numbers:10168454, 10279630, 10280078.
Steering:column LOCKING:ANTI-THEFT Device
This investigation is being closed based on several considerations.By the most inclusive counting of all alleged rollaway incidents (i.e., counting all alleged rollaway incidents and assuming a singular failure mechanism), the incident rate is low, however during EA09-013, ODI identified a number of different failure mechanisms in 180 incidents related to the alleged defect.The highest rate for any particular failure mechanism, the failure of the Automatic Transmission Parking System, was 4.4/100K.The next-highest failure rate was for the BSI System, at 3.4/100K.For all identified failure mechanisms there has been a drastically declining trend including very few incidents occurring in recent years.Accordingly, this investigation is closed.The closing of this investigation does not constitute a finding by NHTSA that a safety-related defect does not exist.For additional information regarding this investigation, see the complete closing resume in the document file for EA09-013. The ODI reports cited above can be reviewed at www-odi.nhtsa.dot.gov/owners/SearchNHTSAID under the following identification (ODI) numbers:10168454, 10279630, 10280078.
Steering
This investigation is being closed based on several considerations.By the most inclusive counting of all alleged rollaway incidents (i.e., counting all alleged rollaway incidents and assuming a singular failure mechanism), the incident rate is low, however during EA09-013, ODI identified a number of different failure mechanisms in 180 incidents related to the alleged defect.The highest rate for any particular failure mechanism, the failure of the Automatic Transmission Parking System, was 4.4/100K.The next-highest failure rate was for the BSI System, at 3.4/100K.For all identified failure mechanisms there has been a drastically declining trend including very few incidents occurring in recent years.Accordingly, this investigation is closed.The closing of this investigation does not constitute a finding by NHTSA that a safety-related defect does not exist.For additional information regarding this investigation, see the complete closing resume in the document file for EA09-013. The ODI reports cited above can be reviewed at www-odi.nhtsa.dot.gov/owners/SearchNHTSAID under the following identification (ODI) numbers:10168454, 10279630, 10280078.
PE09020 · Vehicle Rollaway Allegations
Opened Apr 21, 2009 · Closed Aug 19, 2009
Status: closed (inferred from source dates) · Steering; Steering:column; Steering:column LOCKING:ANTI-THEFT Device
IN RESPONSE TO AN INFORMATION REQUEST (IR) LETTER SENT BY THE OFFICE OF DEFECTS INVESTIGATION (ODI), FORD STATED CONSUMER REPORTS OF HIGHER THAN EXPECTED EFFORTS WHEN SHIFTING INTO AND OUT OF PARK COULD BE A RESULT OF A GROOVE BEING WORN INTO THE SWING ARM RAMP OF THE STEERING COLUMN. THE SWING ARM IS A COMPONENT BOLTED TO THE STEERING COLUMN THAT ASSISTS IN SHIFTING THROUGH THE TRANSMISSION GEARS.AN ENGINEERING EVALUATION CONDUCTED BY FORD OF RETURNED STEERING COLUMNS FOUND THE GROOVE COULD BE CREATED OVER TIME IF CONSUMER SHIFT MORE QUICKLY FROM THE DRIVE OR REVERSE TO PARK THAN THE BRAKE SHIFT INTERLOCK (BSI) SOLENOID PIN RETRACTS AFTER THE BRAKE PEDAL IS APPLIED. IN NOVEMBER OF 2004, FORD RELEASED A REDESIGNED BSI SOLENOID WITH A SHORTER PIN RETRACTING TIME AS A SERVICEABLE COMPONENT. FORD HAS NOTED THE SHORTER RETRACTION TIME SIGNIFICANTLY LESSENS THE LIKELIHOOD OF BSI SOLENOID PIN TO SWING ARM CONTACT EVEN WITH RAPID CONSUMER SHIFTS.FORD ALSO ISSUED A TECHNICAL SERVICE BULLETIN, TSB 04-22-12, TO INSTRUCT SERVICE TECHNICIANS ON THE PROPER DIAGNOSIS AND VEHICLE REPAIR. REVIEWING COMPLAINTS TO ODI AND DATA SUBMITTED BY FORD, ODI HAS IDENTIFIED 200 ALLEGED INCIDENTS OF UNINTENDED VEHICLE MOVEMENT AFTER CONSUMERS BELIEVE THEY HAVE SHIFTED THE VEHICLE INTO PARK, RESULTING IN 85 ALLEGED CRASHES AND 32 ALLEGED INJURIES.IN ADDITION TO THE REPORTS OF ALLEGED INCIDENTS OF UNINTENDED VEHICLE MOVEMENT, ODI HAS ALSO IDENTIFIED 883 REPORTS OF CONSUMERS ALLEGING DIFFICULTY OR THE INABILITY TO SHIFT THE VEHICLE INTO PARK.THIS PRELIMINARY EVALUATION HAS BEEN UPGRADED TO AN ENGINEERING ANALYSIS (EA09-013) TO FURTHER ASSESS THE SCOPE, FREQUENCY AND RISK TO MOTOR VEHICLE SAFETY OF THE ALLEGED DEFECT IN THE SUBJECT VEHICLES.
Additional source detail variants (3)
Steering:column
IN RESPONSE TO AN INFORMATION REQUEST (IR) LETTER SENT BY THE OFFICE OF DEFECTS INVESTIGATION (ODI), FORD STATED CONSUMER REPORTS OF HIGHER THAN EXPECTED EFFORTS WHEN SHIFTING INTO AND OUT OF PARK COULD BE A RESULT OF A GROOVE BEING WORN INTO THE SWING ARM RAMP OF THE STEERING COLUMN. THE SWING ARM IS A COMPONENT BOLTED TO THE STEERING COLUMN THAT ASSISTS IN SHIFTING THROUGH THE TRANSMISSION GEARS.AN ENGINEERING EVALUATION CONDUCTED BY FORD OF RETURNED STEERING COLUMNS FOUND THE GROOVE COULD BE CREATED OVER TIME IF CONSUMER SHIFT MORE QUICKLY FROM THE DRIVE OR REVERSE TO PARK THAN THE BRAKE SHIFT INTERLOCK (BSI) SOLENOID PIN RETRACTS AFTER THE BRAKE PEDAL IS APPLIED. IN NOVEMBER OF 2004, FORD RELEASED A REDESIGNED BSI SOLENOID WITH A SHORTER PIN RETRACTING TIME AS A SERVICEABLE COMPONENT. FORD HAS NOTED THE SHORTER RETRACTION TIME SIGNIFICANTLY LESSENS THE LIKELIHOOD OF BSI SOLENOID PIN TO SWING ARM CONTACT EVEN WITH RAPID CONSUMER SHIFTS.FORD ALSO ISSUED A TECHNICAL SERVICE BULLETIN, TSB 04-22-12, TO INSTRUCT SERVICE TECHNICIANS ON THE PROPER DIAGNOSIS AND VEHICLE REPAIR. REVIEWING COMPLAINTS TO ODI AND DATA SUBMITTED BY FORD, ODI HAS IDENTIFIED 200 ALLEGED INCIDENTS OF UNINTENDED VEHICLE MOVEMENT AFTER CONSUMERS BELIEVE THEY HAVE SHIFTED THE VEHICLE INTO PARK, RESULTING IN 85 ALLEGED CRASHES AND 32 ALLEGED INJURIES.IN ADDITION TO THE REPORTS OF ALLEGED INCIDENTS OF UNINTENDED VEHICLE MOVEMENT, ODI HAS ALSO IDENTIFIED 883 REPORTS OF CONSUMERS ALLEGING DIFFICULTY OR THE INABILITY TO SHIFT THE VEHICLE INTO PARK.THIS PRELIMINARY EVALUATION HAS BEEN UPGRADED TO AN ENGINEERING ANALYSIS (EA09-013) TO FURTHER ASSESS THE SCOPE, FREQUENCY AND RISK TO MOTOR VEHICLE SAFETY OF THE ALLEGED DEFECT IN THE SUBJECT VEHICLES.
Steering:column LOCKING:ANTI-THEFT Device
IN RESPONSE TO AN INFORMATION REQUEST (IR) LETTER SENT BY THE OFFICE OF DEFECTS INVESTIGATION (ODI), FORD STATED CONSUMER REPORTS OF HIGHER THAN EXPECTED EFFORTS WHEN SHIFTING INTO AND OUT OF PARK COULD BE A RESULT OF A GROOVE BEING WORN INTO THE SWING ARM RAMP OF THE STEERING COLUMN. THE SWING ARM IS A COMPONENT BOLTED TO THE STEERING COLUMN THAT ASSISTS IN SHIFTING THROUGH THE TRANSMISSION GEARS.AN ENGINEERING EVALUATION CONDUCTED BY FORD OF RETURNED STEERING COLUMNS FOUND THE GROOVE COULD BE CREATED OVER TIME IF CONSUMER SHIFT MORE QUICKLY FROM THE DRIVE OR REVERSE TO PARK THAN THE BRAKE SHIFT INTERLOCK (BSI) SOLENOID PIN RETRACTS AFTER THE BRAKE PEDAL IS APPLIED. IN NOVEMBER OF 2004, FORD RELEASED A REDESIGNED BSI SOLENOID WITH A SHORTER PIN RETRACTING TIME AS A SERVICEABLE COMPONENT. FORD HAS NOTED THE SHORTER RETRACTION TIME SIGNIFICANTLY LESSENS THE LIKELIHOOD OF BSI SOLENOID PIN TO SWING ARM CONTACT EVEN WITH RAPID CONSUMER SHIFTS.FORD ALSO ISSUED A TECHNICAL SERVICE BULLETIN, TSB 04-22-12, TO INSTRUCT SERVICE TECHNICIANS ON THE PROPER DIAGNOSIS AND VEHICLE REPAIR. REVIEWING COMPLAINTS TO ODI AND DATA SUBMITTED BY FORD, ODI HAS IDENTIFIED 200 ALLEGED INCIDENTS OF UNINTENDED VEHICLE MOVEMENT AFTER CONSUMERS BELIEVE THEY HAVE SHIFTED THE VEHICLE INTO PARK, RESULTING IN 85 ALLEGED CRASHES AND 32 ALLEGED INJURIES.IN ADDITION TO THE REPORTS OF ALLEGED INCIDENTS OF UNINTENDED VEHICLE MOVEMENT, ODI HAS ALSO IDENTIFIED 883 REPORTS OF CONSUMERS ALLEGING DIFFICULTY OR THE INABILITY TO SHIFT THE VEHICLE INTO PARK.THIS PRELIMINARY EVALUATION HAS BEEN UPGRADED TO AN ENGINEERING ANALYSIS (EA09-013) TO FURTHER ASSESS THE SCOPE, FREQUENCY AND RISK TO MOTOR VEHICLE SAFETY OF THE ALLEGED DEFECT IN THE SUBJECT VEHICLES.
Steering
IN RESPONSE TO AN INFORMATION REQUEST (IR) LETTER SENT BY THE OFFICE OF DEFECTS INVESTIGATION (ODI), FORD STATED CONSUMER REPORTS OF HIGHER THAN EXPECTED EFFORTS WHEN SHIFTING INTO AND OUT OF PARK COULD BE A RESULT OF A GROOVE BEING WORN INTO THE SWING ARM RAMP OF THE STEERING COLUMN. THE SWING ARM IS A COMPONENT BOLTED TO THE STEERING COLUMN THAT ASSISTS IN SHIFTING THROUGH THE TRANSMISSION GEARS.AN ENGINEERING EVALUATION CONDUCTED BY FORD OF RETURNED STEERING COLUMNS FOUND THE GROOVE COULD BE CREATED OVER TIME IF CONSUMER SHIFT MORE QUICKLY FROM THE DRIVE OR REVERSE TO PARK THAN THE BRAKE SHIFT INTERLOCK (BSI) SOLENOID PIN RETRACTS AFTER THE BRAKE PEDAL IS APPLIED. IN NOVEMBER OF 2004, FORD RELEASED A REDESIGNED BSI SOLENOID WITH A SHORTER PIN RETRACTING TIME AS A SERVICEABLE COMPONENT. FORD HAS NOTED THE SHORTER RETRACTION TIME SIGNIFICANTLY LESSENS THE LIKELIHOOD OF BSI SOLENOID PIN TO SWING ARM CONTACT EVEN WITH RAPID CONSUMER SHIFTS.FORD ALSO ISSUED A TECHNICAL SERVICE BULLETIN, TSB 04-22-12, TO INSTRUCT SERVICE TECHNICIANS ON THE PROPER DIAGNOSIS AND VEHICLE REPAIR. REVIEWING COMPLAINTS TO ODI AND DATA SUBMITTED BY FORD, ODI HAS IDENTIFIED 200 ALLEGED INCIDENTS OF UNINTENDED VEHICLE MOVEMENT AFTER CONSUMERS BELIEVE THEY HAVE SHIFTED THE VEHICLE INTO PARK, RESULTING IN 85 ALLEGED CRASHES AND 32 ALLEGED INJURIES.IN ADDITION TO THE REPORTS OF ALLEGED INCIDENTS OF UNINTENDED VEHICLE MOVEMENT, ODI HAS ALSO IDENTIFIED 883 REPORTS OF CONSUMERS ALLEGING DIFFICULTY OR THE INABILITY TO SHIFT THE VEHICLE INTO PARK.THIS PRELIMINARY EVALUATION HAS BEEN UPGRADED TO AN ENGINEERING ANALYSIS (EA09-013) TO FURTHER ASSESS THE SCOPE, FREQUENCY AND RISK TO MOTOR VEHICLE SAFETY OF THE ALLEGED DEFECT IN THE SUBJECT VEHICLES.