IllustrationWeld failed in front door making loud popping noise when door opens and closes , affects window operation , eventually affecting door closing
2020 Ford Escape Hybrid
Owner reports · Recalls · Investigations
More warning signs than most Escape Hybrid years
Owner complaints for the 2020 Ford Escape Hybrid are substantially higher than the model-year median of 68.
About this comparison →How this year compares
Owner complaints by model year
Compare all Escape Hybrid years →Counts vary with age, sales and reporting. They are not failure rates.
What owners reported most
All reported categories
Tap a category to read its complaints. One report may name several components.
When problems were reported
Mileage at the reported incident
Limited mileage data: 67 of 288 reports include usable mileage. There isn’t enough coverage to show a useful chart.
NHTSA’s mileage field refers to the reported incident, not necessarily the filing date. This shows report counts, not the likelihood of a failure.
What to inspect
Issues worth paying extra attention to based on owner reports.
- Structure. Review the 105 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
- Engine. Review the 64 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
- Electrical System. Review the 42 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
NHTSA owner reports · September 18, 2026 snapshot.
1 crash reports1 fire reports5 injury reports
What owners actually said
288 reportsaudible loud click/twang noise from drivers door upon full opening.It happens every time door is opened and has become worse since trip to Virginia where when opening door on a hill the door really started popping loudly at full open.The Ford Dealer says its due to a broken/failed door check weld inside door.Dealer also stated …
Read full complaint
audible loud click/twang noise from drivers door upon full opening.It happens every time door is opened and has become worse since trip to Virginia where when opening door on a hill the door really started popping loudly at full open.The Ford Dealer says its due to a broken/failed door check weld inside door.Dealer also stated Ford is aware of this defect and released an internal directive called a Special Service Message which directs Dealer to replace drivers door due to a failed weld at the door check assembly base part number 7823552.The Dealer also advised me they have seen multiple instances of unintended door opening/closing failures due to this Safety concern which is very alarming.Unfortunately our vehicle is just out of base warranty by time quoting approx 2899.$ to fix it.I called FOMOCO customer assistance 800 392 3673 created contact CAS44167123-Z9G8H0 requesting WARRANTABLE repair based on known safety defect.FOMOCO denied financial assistance.I am notifying NHTSA of this known defect and the obvious related safety hazard of unintended door opening or failure to fully close .My local dealer advised me they have had to replace doors on approximately 15 vehicle so far and the larger dealer in Brandon advised me they have seen that many failures as well.i certainly hope we r not next.
Opened door as usual made loud pop noise and now does not shut properly and flings open. Window will not go down and when I accidentally tried to put it down it made the dash flash and go blank for awhile. Ford said it is a known issue but my car went out of warranty in May and directed me to Ford. Ford said that they may hel…
Read full complaint
Opened door as usual made loud pop noise and now does not shut properly and flings open. Window will not go down and when I accidentally tried to put it down it made the dash flash and go blank for awhile. Ford said it is a known issue but my car went out of warranty in May and directed me to Ford. Ford said that they may help pay for some of the repairs. But will have to see and investigate. I figured it was just a piece that needed to be fixed they say a whole new door? But tonight the door just came open while going down the road.
The contact owns a 2020 Ford Escape. The contact received notification of NHTSA Campaign Number: 23V380000 (Engine) however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The dealer was made aware of the issue and c…
Read full complaint
The contact owns a 2020 Ford Escape. The contact received notification of NHTSA Campaign Number: 23V380000 (Engine) however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The dealer was made aware of the issue and confirmed that parts were not yet available. The manufacturer was made aware of the issue and confirmed that parts were not yet available. The contact had not experienced a failure. VIN tool confirms parts not available.
Drivers side door weld has failed at one point.
In 2021, the driver's side door began to be difficult to open and close. It make a loud cracking or popping sound each time it was opened and closed. Eventually, I was unable to open or close the door at all, and had to enter and exit the vehicle through the passenger door. Ford repaired the door under warranty. In 2023, the…
Read full complaint
In 2021, the driver's side door began to be difficult to open and close. It make a loud cracking or popping sound each time it was opened and closed. Eventually, I was unable to open or close the door at all, and had to enter and exit the vehicle through the passenger door. Ford repaired the door under warranty. In 2023, the passenger's side door began to make the same noise and exhibit resistance to opening and closing. As the car is no longer under warranty, I will have to pay for the repair, but the issue is clearly a defective hinge or weld.
After owning this car for 38 months we were out running errands and the driver's door began making a cracking noise when opened or closed. We visually inspected the door and found that it was related to the bracket that keeps the door from opening too far,. The bracket did not appear to be broken on the outside of the door but u…
Read full complaint
After owning this car for 38 months we were out running errands and the driver's door began making a cracking noise when opened or closed. We visually inspected the door and found that it was related to the bracket that keeps the door from opening too far,. The bracket did not appear to be broken on the outside of the door but upon further further review, we noticed that 3 spot welds that secured the bracket inside the door had failed. I have attached a picture of the failed welds taken by the body shop (circled in yellow). The assessment of the body shop was that the door needed to replaced due to a "design flaw" that was known by the manufacturer. When I spoke to the body shop manager he said that he had replaced several doors for the exact same reason in his shop. This car was never in an accident so this issue is just from normal opening and closing. We noticed that the other 3 doors did not have the same method for attaching the bracket to the inside of the door. The loaner car the dealer gave us was also a Escape model (2023) and the flaw had been corrected. Had the car ever been in an accident on the driver's side and those welds did not hold there could have been serious injuries or a fatality. I am requesting that a recall be issued for that model of Escape for 2020 to replace the driver's door.
I received a safety recall notice back in May and as of today July 27th there is still no proposed solution. The vehicle is at risk of catching fire, endangering myself, my family, and others, so I am afraid to drive it.
The left front door is making popping noises. Body shop has stated that the spot welds on the door have failed and the entire door will need to be replaced. Yes, it is available for inspection. Safety issue is that the door could open while driving threatening life of those in car and on highway if door were to pop open. The…
Read full complaint
The left front door is making popping noises. Body shop has stated that the spot welds on the door have failed and the entire door will need to be replaced. Yes, it is available for inspection. Safety issue is that the door could open while driving threatening life of those in car and on highway if door were to pop open. The problem has been confirmed by independent service center. Plan on bringing car to dealership for inspection. No warnings prior to failure, just started without warning.
The contact owns a 2020 Ford Escape. The contact received notification of NHTSA Campaign Number: 23V380000 (Engine) however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufact…
Read full complaint
The contact owns a 2020 Ford Escape. The contact received notification of NHTSA Campaign Number: 23V380000 (Engine) however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.
Official recalls
125V881000 · Power Train:automatic Transmission:control Module (tcm/pcm/tecm)
Dec 18, 2025
Ford Motor Company (Ford) is recalling certain 2022-2024 Maverick Hybrid and 2020 Escape Hybrid vehicles. The Hybrid Powertrain Control Module (HPCM) software may cause the vehicle to shift into neutral unexpectedly, causing a loss of drive power.
Consequence & remedy
Consequence: A loss of drive power increases the risk of a crash.
Remedy: Dealers will update the HPCM software, free of charge. Owner notification letters were mailed February 12, 2026. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 24S33. Vehicle Identification Numbers (VINs) involved in this recall will be searchable on NHTSA.gov beginning January 15, 2026. This is an expansion of Recalls 24V330 (24S33) and 25V133 (25S16).
Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗
NHTSA investigations
2PE23013 · Failed Door Check Arm Attachment Point
Opened Jul 7, 2023 · Closed Jan 24, 2024
Status: closed (inferred from source dates) · Structure:body:door ; Structure:body:door:hinge And Attachments
On July 7, 2023, the Office of Defects Investigation (ODI) opened PE23-013 to investigate instances of check arm bracket failure in the front doors in model year (MY) 2020-2021 Ford Escape vehicles. At the time of opening, ODI received 118 Vehicle Owner Questionnaires (VOQs) alleging this failure. To date, ODI has received 593 VOQs alleging this failure, with a variety of reported failure conditions. The most common reported failure condition was reduced door functionality (e.g. door was more difficult to open or close) and the least common was inadvertent door opening. Other reported failure conditions include inability to latch and inability to open. Three VOQs reported injuries, one of which requiring medical attention. ODI conducted a consumer survey which yielded an additional 44 injuries (although the VOQs did not indicate any injury), none of which requiring medical attention. All these injuries were bumps/bruises from the door closing on occupants’ arms and legs while entering and exiting the vehicle. The function of the check arm system is to provide hold-open assist at specific angles and to assist with door closing energy. It does not provide vertical support of the door and is independent of the latching mechanism. This failure is progressive and detectable by vehicle occupants. Consumers commonly report hearing a popping or snapping noise when opening and closing the door. This noise is caused by some of the welds between the bracket and door structure failing and detaching. There may also be visible damage present to the welds in the door structure. Continued use of the door may result in all welds separating and the bracket fully detaching from the door structure, which could lead to increased resistance in closing and opening the door, restrained window operation, and the door freely rotating when open. ODI inspected 3 consumer vehicles in the field, and 2 test vehicles at Ford’s testing facility. The test vehicles were retrofitted with the failed component. ODI observed an increased door closing resistance, however, was unable to reproduce an inadvertent open while parked or driving, or a failure to latch or open condition. Testing also verified this failure did not affect the door ajar warning system. This system provides an audible and visual warning in the event a door did not achieve primary latch position. Ford has provided details on a one-time-repair customer satisfaction program (23B56), stating that they will provide customers with a letter, currently targeted for March 2024, to bring their vehicle to a Ford dealership for a proactive repair. Dealers will inspect the door check arm welds for damage and will either provide a rivet plate to reinforce the existing door check arm or will provide a replacement door, depending on the level of damage present. Customers will be eligible for reimbursement if they previously paid to repair this issue. In view of the high detectability of failure, low potential hazard to drivers, and Ford’s customer satisfaction program to provide a proactive repair, this Preliminary Evaluation (PE) is closed. The closing of this investigation does not constitute a finding by NHTSA that a safety-related defect does not exist. The Agency reserves the right to take additional action if warranted by future circumstances. To review the ODI reports cited in the Closing Resume ODI Report Identification Number document, go to NHTSA.gov.
Additional source detail variants (2)
Structure:body:door
On July 7, 2023, the Office of Defects Investigation (ODI) opened PE23-013 to investigate instances of check arm bracket failure in the front doors in model year (MY) 2020-2021 Ford Escape vehicles. At the time of opening, ODI received 118 Vehicle Owner Questionnaires (VOQs) alleging this failure. To date, ODI has received 593 VOQs alleging this failure, with a variety of reported failure conditions. The most common reported failure condition was reduced door functionality (e.g. door was more difficult to open or close) and the least common was inadvertent door opening. Other reported failure conditions include inability to latch and inability to open. Three VOQs reported injuries, one of which requiring medical attention. ODI conducted a consumer survey which yielded an additional 44 injuries (although the VOQs did not indicate any injury), none of which requiring medical attention. All these injuries were bumps/bruises from the door closing on occupants’ arms and legs while entering and exiting the vehicle. The function of the check arm system is to provide hold-open assist at specific angles and to assist with door closing energy. It does not provide vertical support of the door and is independent of the latching mechanism. This failure is progressive and detectable by vehicle occupants. Consumers commonly report hearing a popping or snapping noise when opening and closing the door. This noise is caused by some of the welds between the bracket and door structure failing and detaching. There may also be visible damage present to the welds in the door structure. Continued use of the door may result in all welds separating and the bracket fully detaching from the door structure, which could lead to increased resistance in closing and opening the door, restrained window operation, and the door freely rotating when open. ODI inspected 3 consumer vehicles in the field, and 2 test vehicles at Ford’s testing facility. The test vehicles were retrofitted with the failed component. ODI observed an increased door closing resistance, however, was unable to reproduce an inadvertent open while parked or driving, or a failure to latch or open condition. Testing also verified this failure did not affect the door ajar warning system. This system provides an audible and visual warning in the event a door did not achieve primary latch position. Ford has provided details on a one-time-repair customer satisfaction program (23B56), stating that they will provide customers with a letter, currently targeted for March 2024, to bring their vehicle to a Ford dealership for a proactive repair. Dealers will inspect the door check arm welds for damage and will either provide a rivet plate to reinforce the existing door check arm or will provide a replacement door, depending on the level of damage present. Customers will be eligible for reimbursement if they previously paid to repair this issue. In view of the high detectability of failure, low potential hazard to drivers, and Ford’s customer satisfaction program to provide a proactive repair, this Preliminary Evaluation (PE) is closed. The closing of this investigation does not constitute a finding by NHTSA that a safety-related defect does not exist. The Agency reserves the right to take additional action if warranted by future circumstances. To review the ODI reports cited in the Closing Resume ODI Report Identification Number document, go to NHTSA.gov.
Structure:body:door:hinge And Attachments
On July 7, 2023, the Office of Defects Investigation (ODI) opened PE23-013 to investigate instances of check arm bracket failure in the front doors in model year (MY) 2020-2021 Ford Escape vehicles. At the time of opening, ODI received 118 Vehicle Owner Questionnaires (VOQs) alleging this failure. To date, ODI has received 593 VOQs alleging this failure, with a variety of reported failure conditions. The most common reported failure condition was reduced door functionality (e.g. door was more difficult to open or close) and the least common was inadvertent door opening. Other reported failure conditions include inability to latch and inability to open. Three VOQs reported injuries, one of which requiring medical attention. ODI conducted a consumer survey which yielded an additional 44 injuries (although the VOQs did not indicate any injury), none of which requiring medical attention. All these injuries were bumps/bruises from the door closing on occupants’ arms and legs while entering and exiting the vehicle. The function of the check arm system is to provide hold-open assist at specific angles and to assist with door closing energy. It does not provide vertical support of the door and is independent of the latching mechanism. This failure is progressive and detectable by vehicle occupants. Consumers commonly report hearing a popping or snapping noise when opening and closing the door. This noise is caused by some of the welds between the bracket and door structure failing and detaching. There may also be visible damage present to the welds in the door structure. Continued use of the door may result in all welds separating and the bracket fully detaching from the door structure, which could lead to increased resistance in closing and opening the door, restrained window operation, and the door freely rotating when open. ODI inspected 3 consumer vehicles in the field, and 2 test vehicles at Ford’s testing facility. The test vehicles were retrofitted with the failed component. ODI observed an increased door closing resistance, however, was unable to reproduce an inadvertent open while parked or driving, or a failure to latch or open condition. Testing also verified this failure did not affect the door ajar warning system. This system provides an audible and visual warning in the event a door did not achieve primary latch position. Ford has provided details on a one-time-repair customer satisfaction program (23B56), stating that they will provide customers with a letter, currently targeted for March 2024, to bring their vehicle to a Ford dealership for a proactive repair. Dealers will inspect the door check arm welds for damage and will either provide a rivet plate to reinforce the existing door check arm or will provide a replacement door, depending on the level of damage present. Customers will be eligible for reimbursement if they previously paid to repair this issue. In view of the high detectability of failure, low potential hazard to drivers, and Ford’s customer satisfaction program to provide a proactive repair, this Preliminary Evaluation (PE) is closed. The closing of this investigation does not constitute a finding by NHTSA that a safety-related defect does not exist. The Agency reserves the right to take additional action if warranted by future circumstances. To review the ODI reports cited in the Closing Resume ODI Report Identification Number document, go to NHTSA.gov.
DP22005 · Pedestrian Alert Sounds
Opened Jan 27, 2023 · Closed Aug 7, 2023
Status: closed (inferred from source dates) · Electrical System:propulsion System
NHTSA received a petition on or about July 18, 2022, requesting that Federal Motor Vehicle Safety Standard (FMVSS) 141 be applied to all electric and hybrid vehicles operating in the United States. The petition can be reviewed at NHTSA.gov under ODI Number 11486072. FMVSS 141 establishes performance requirements for pedestrian alert sounds for motor vehicles. The standard applies to hybrid and electric vehicles that have a gross vehicle weight rating of 4,536 KG or less or are defined as low-speed vehicles. The standard became fully applicable to all such vehicles manufactured on or after March 1, 2021.On January 27, 2023, NHTSA opened Defect Petition (DP) 22-005 to evaluate the subject matter described in the petition. On June 24, 2023 and as supplemented on June 25, 2023, the petitioner notified NHTSA he was withdrawing his petition. The petitioner indicated that, based on his review of data, there is no justification for asserting potential benefits that could be derived from actions sought by my petition. Based on the petitioner's withdrawal, DP22-005 is closed. Closure of this DP does not represent a determination by NHTSA regarding the subject matter of the petition.