IllustrationLiftgate latch does not work and trunk no longer opens after 55,000 miles. This is one fewer choice to exit the car in an emergency.
2020 Ford Escape Hybrid
Owner reports · Recalls · Investigations
More warning signs than most Escape Hybrid years
Owner complaints for the 2020 Ford Escape Hybrid are substantially higher than the model-year median of 68.
About this comparison →How this year compares
Owner complaints by model year
Compare all Escape Hybrid years →Counts vary with age, sales and reporting. They are not failure rates.
What owners reported most
All reported categories
Tap a category to read its complaints. One report may name several components.
When problems were reported
Mileage at the reported incident
Limited mileage data: 67 of 288 reports include usable mileage. There isn’t enough coverage to show a useful chart.
NHTSA’s mileage field refers to the reported incident, not necessarily the filing date. This shows report counts, not the likelihood of a failure.
What to inspect
Issues worth paying extra attention to based on owner reports.
- Structure. Review the 105 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
- Engine. Review the 64 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
- Electrical System. Review the 42 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
NHTSA owner reports · September 18, 2026 snapshot.
1 crash reports1 fire reports5 injury reports
Unknown Or Other complaints
64 reportsThe round gear nob will not release out of PARK. It happens when it is 105°+. The car starts. Then I put my foot on the break and try to turn round gear shift nob from PARK to REVERSE and the nob will not move. Break lights work. All doors closed. Seatbelt on. I've been sitting in my car for about the last 25 minutes and using …
Read full complaint
The round gear nob will not release out of PARK. It happens when it is 105°+. The car starts. Then I put my foot on the break and try to turn round gear shift nob from PARK to REVERSE and the nob will not move. Break lights work. All doors closed. Seatbelt on. I've been sitting in my car for about the last 25 minutes and using the air conditioner to try to cool down the console, dash and the gear shift knob and everything's nice and cold but I still cannot get the knob to turn. I have also turned off and restarted the engine about three times and still I am stuck here in a parking lot and the car's not going anywhere. This happened a year ago and I brought it into the a Sacramento Ford dealership but because it didn't get hot during their working hours they were not able to replicate the problem. So here I am again and it's after Ford hours and I normally get service at Folsom Lake Ford in California but how am I going to get them to replicate the issue and they say they can't replicate the same problem then how can I get this fixed. Meanwhile I'm stranded in a not so safe area with a lot of homeless people around that are having violent issues.
After the car was sitting in a parking lot without shade, unable to shift car out of park. Driver in seat, doors shut, seatbelt on--all normal circumstances; ready to drive. Brake pressed, rotary shifter stuck in P. No warnings or lights on dash Brake lights illuminated when pedal pushed. Temp on dash reads 103 degrees. Af…
Read full complaint
After the car was sitting in a parking lot without shade, unable to shift car out of park. Driver in seat, doors shut, seatbelt on--all normal circumstances; ready to drive. Brake pressed, rotary shifter stuck in P. No warnings or lights on dash Brake lights illuminated when pedal pushed. Temp on dash reads 103 degrees. After sitting with the car running for 30 minutes with AC on; attempted to shift as normal--shifter knob works. Have not called service center yet; plan to report as earliest convenience.
The car battery keeps being drained by modules staying active, this has affected my car so far twice in a year. This poses a safety issue as the car can get stuck and is inoperative. Ford has 2 service bulletins to repair the issue to reprogram the ABS module and PCM, they are SSM 49574 and SSM 49990. However Ford will not cover…
Read full complaint
The car battery keeps being drained by modules staying active, this has affected my car so far twice in a year. This poses a safety issue as the car can get stuck and is inoperative. Ford has 2 service bulletins to repair the issue to reprogram the ABS module and PCM, they are SSM 49574 and SSM 49990. However Ford will not cover these repairs under extended warranty and although the issue initially occurred while under the 3yr/30k warranty but they didn’t have the service bulletins out at that time. This needs to be listed as recall issue as many people on Ford forum have complained about this issue for 2020 Ford Escape hybrids
Bracket for right check arm, defective weld spots
Unresolved under hood fire recall
The door check arm welds on my passenger door have failed and my drivers side door is starting to fail. This is rendering my vehicle front doors unusable. In the event of an accident, being able to open the doors properly seems like it is a HUGE safety issue.
Passenger side window has come loose and closes poorly with a loud klunking sound.
My car had been having no issues and working as expected. I left to depart for my destination and my driver's door made a terrible grinding noise and didn't open smoothly. There was resistance. I am able to drive the vehicle without issue, but I cannot open the driver's door all the way. My local Ford Dealership won't repai…
Read full complaint
My car had been having no issues and working as expected. I left to depart for my destination and my driver's door made a terrible grinding noise and didn't open smoothly. There was resistance. I am able to drive the vehicle without issue, but I cannot open the driver's door all the way. My local Ford Dealership won't repair the door, citing that I need to wait for the recall from Ford. I'd like to have a fully functional door on the vehicle I purchased.
On 2/19/2024 i exited my vehicle and heard a popping noise. At that time I couldn't figure out where the noise came from. After existing the vehicle I attempted to close the door, unfortunately the door would not close property. It was clicking and the entire door wouldn't align properly without closing. when opening the door it…
Read full complaint
On 2/19/2024 i exited my vehicle and heard a popping noise. At that time I couldn't figure out where the noise came from. After existing the vehicle I attempted to close the door, unfortunately the door would not close property. It was clicking and the entire door wouldn't align properly without closing. when opening the door it also opens and hangs. Also the window does not roll more that 25% down and stops. Do if impact on either side, or a fire in the vehicle would prevent someone to escape I went to the internet and started researching the issue. I found many same model and year vehicles have the same issue. The issue is the 3 spot welds that hold the door fail and at the time of failure break the control arm that connects the door.
Official recalls
125V881000 · Power Train:automatic Transmission:control Module (tcm/pcm/tecm)
Dec 18, 2025
Ford Motor Company (Ford) is recalling certain 2022-2024 Maverick Hybrid and 2020 Escape Hybrid vehicles. The Hybrid Powertrain Control Module (HPCM) software may cause the vehicle to shift into neutral unexpectedly, causing a loss of drive power.
Consequence & remedy
Consequence: A loss of drive power increases the risk of a crash.
Remedy: Dealers will update the HPCM software, free of charge. Owner notification letters were mailed February 12, 2026. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 24S33. Vehicle Identification Numbers (VINs) involved in this recall will be searchable on NHTSA.gov beginning January 15, 2026. This is an expansion of Recalls 24V330 (24S33) and 25V133 (25S16).
Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗
NHTSA investigations
2PE23013 · Failed Door Check Arm Attachment Point
Opened Jul 7, 2023 · Closed Jan 24, 2024
Status: closed (inferred from source dates) · Structure:body:door ; Structure:body:door:hinge And Attachments
On July 7, 2023, the Office of Defects Investigation (ODI) opened PE23-013 to investigate instances of check arm bracket failure in the front doors in model year (MY) 2020-2021 Ford Escape vehicles. At the time of opening, ODI received 118 Vehicle Owner Questionnaires (VOQs) alleging this failure. To date, ODI has received 593 VOQs alleging this failure, with a variety of reported failure conditions. The most common reported failure condition was reduced door functionality (e.g. door was more difficult to open or close) and the least common was inadvertent door opening. Other reported failure conditions include inability to latch and inability to open. Three VOQs reported injuries, one of which requiring medical attention. ODI conducted a consumer survey which yielded an additional 44 injuries (although the VOQs did not indicate any injury), none of which requiring medical attention. All these injuries were bumps/bruises from the door closing on occupants’ arms and legs while entering and exiting the vehicle. The function of the check arm system is to provide hold-open assist at specific angles and to assist with door closing energy. It does not provide vertical support of the door and is independent of the latching mechanism. This failure is progressive and detectable by vehicle occupants. Consumers commonly report hearing a popping or snapping noise when opening and closing the door. This noise is caused by some of the welds between the bracket and door structure failing and detaching. There may also be visible damage present to the welds in the door structure. Continued use of the door may result in all welds separating and the bracket fully detaching from the door structure, which could lead to increased resistance in closing and opening the door, restrained window operation, and the door freely rotating when open. ODI inspected 3 consumer vehicles in the field, and 2 test vehicles at Ford’s testing facility. The test vehicles were retrofitted with the failed component. ODI observed an increased door closing resistance, however, was unable to reproduce an inadvertent open while parked or driving, or a failure to latch or open condition. Testing also verified this failure did not affect the door ajar warning system. This system provides an audible and visual warning in the event a door did not achieve primary latch position. Ford has provided details on a one-time-repair customer satisfaction program (23B56), stating that they will provide customers with a letter, currently targeted for March 2024, to bring their vehicle to a Ford dealership for a proactive repair. Dealers will inspect the door check arm welds for damage and will either provide a rivet plate to reinforce the existing door check arm or will provide a replacement door, depending on the level of damage present. Customers will be eligible for reimbursement if they previously paid to repair this issue. In view of the high detectability of failure, low potential hazard to drivers, and Ford’s customer satisfaction program to provide a proactive repair, this Preliminary Evaluation (PE) is closed. The closing of this investigation does not constitute a finding by NHTSA that a safety-related defect does not exist. The Agency reserves the right to take additional action if warranted by future circumstances. To review the ODI reports cited in the Closing Resume ODI Report Identification Number document, go to NHTSA.gov.
Additional source detail variants (2)
Structure:body:door
On July 7, 2023, the Office of Defects Investigation (ODI) opened PE23-013 to investigate instances of check arm bracket failure in the front doors in model year (MY) 2020-2021 Ford Escape vehicles. At the time of opening, ODI received 118 Vehicle Owner Questionnaires (VOQs) alleging this failure. To date, ODI has received 593 VOQs alleging this failure, with a variety of reported failure conditions. The most common reported failure condition was reduced door functionality (e.g. door was more difficult to open or close) and the least common was inadvertent door opening. Other reported failure conditions include inability to latch and inability to open. Three VOQs reported injuries, one of which requiring medical attention. ODI conducted a consumer survey which yielded an additional 44 injuries (although the VOQs did not indicate any injury), none of which requiring medical attention. All these injuries were bumps/bruises from the door closing on occupants’ arms and legs while entering and exiting the vehicle. The function of the check arm system is to provide hold-open assist at specific angles and to assist with door closing energy. It does not provide vertical support of the door and is independent of the latching mechanism. This failure is progressive and detectable by vehicle occupants. Consumers commonly report hearing a popping or snapping noise when opening and closing the door. This noise is caused by some of the welds between the bracket and door structure failing and detaching. There may also be visible damage present to the welds in the door structure. Continued use of the door may result in all welds separating and the bracket fully detaching from the door structure, which could lead to increased resistance in closing and opening the door, restrained window operation, and the door freely rotating when open. ODI inspected 3 consumer vehicles in the field, and 2 test vehicles at Ford’s testing facility. The test vehicles were retrofitted with the failed component. ODI observed an increased door closing resistance, however, was unable to reproduce an inadvertent open while parked or driving, or a failure to latch or open condition. Testing also verified this failure did not affect the door ajar warning system. This system provides an audible and visual warning in the event a door did not achieve primary latch position. Ford has provided details on a one-time-repair customer satisfaction program (23B56), stating that they will provide customers with a letter, currently targeted for March 2024, to bring their vehicle to a Ford dealership for a proactive repair. Dealers will inspect the door check arm welds for damage and will either provide a rivet plate to reinforce the existing door check arm or will provide a replacement door, depending on the level of damage present. Customers will be eligible for reimbursement if they previously paid to repair this issue. In view of the high detectability of failure, low potential hazard to drivers, and Ford’s customer satisfaction program to provide a proactive repair, this Preliminary Evaluation (PE) is closed. The closing of this investigation does not constitute a finding by NHTSA that a safety-related defect does not exist. The Agency reserves the right to take additional action if warranted by future circumstances. To review the ODI reports cited in the Closing Resume ODI Report Identification Number document, go to NHTSA.gov.
Structure:body:door:hinge And Attachments
On July 7, 2023, the Office of Defects Investigation (ODI) opened PE23-013 to investigate instances of check arm bracket failure in the front doors in model year (MY) 2020-2021 Ford Escape vehicles. At the time of opening, ODI received 118 Vehicle Owner Questionnaires (VOQs) alleging this failure. To date, ODI has received 593 VOQs alleging this failure, with a variety of reported failure conditions. The most common reported failure condition was reduced door functionality (e.g. door was more difficult to open or close) and the least common was inadvertent door opening. Other reported failure conditions include inability to latch and inability to open. Three VOQs reported injuries, one of which requiring medical attention. ODI conducted a consumer survey which yielded an additional 44 injuries (although the VOQs did not indicate any injury), none of which requiring medical attention. All these injuries were bumps/bruises from the door closing on occupants’ arms and legs while entering and exiting the vehicle. The function of the check arm system is to provide hold-open assist at specific angles and to assist with door closing energy. It does not provide vertical support of the door and is independent of the latching mechanism. This failure is progressive and detectable by vehicle occupants. Consumers commonly report hearing a popping or snapping noise when opening and closing the door. This noise is caused by some of the welds between the bracket and door structure failing and detaching. There may also be visible damage present to the welds in the door structure. Continued use of the door may result in all welds separating and the bracket fully detaching from the door structure, which could lead to increased resistance in closing and opening the door, restrained window operation, and the door freely rotating when open. ODI inspected 3 consumer vehicles in the field, and 2 test vehicles at Ford’s testing facility. The test vehicles were retrofitted with the failed component. ODI observed an increased door closing resistance, however, was unable to reproduce an inadvertent open while parked or driving, or a failure to latch or open condition. Testing also verified this failure did not affect the door ajar warning system. This system provides an audible and visual warning in the event a door did not achieve primary latch position. Ford has provided details on a one-time-repair customer satisfaction program (23B56), stating that they will provide customers with a letter, currently targeted for March 2024, to bring their vehicle to a Ford dealership for a proactive repair. Dealers will inspect the door check arm welds for damage and will either provide a rivet plate to reinforce the existing door check arm or will provide a replacement door, depending on the level of damage present. Customers will be eligible for reimbursement if they previously paid to repair this issue. In view of the high detectability of failure, low potential hazard to drivers, and Ford’s customer satisfaction program to provide a proactive repair, this Preliminary Evaluation (PE) is closed. The closing of this investigation does not constitute a finding by NHTSA that a safety-related defect does not exist. The Agency reserves the right to take additional action if warranted by future circumstances. To review the ODI reports cited in the Closing Resume ODI Report Identification Number document, go to NHTSA.gov.
DP22005 · Pedestrian Alert Sounds
Opened Jan 27, 2023 · Closed Aug 7, 2023
Status: closed (inferred from source dates) · Electrical System:propulsion System
NHTSA received a petition on or about July 18, 2022, requesting that Federal Motor Vehicle Safety Standard (FMVSS) 141 be applied to all electric and hybrid vehicles operating in the United States. The petition can be reviewed at NHTSA.gov under ODI Number 11486072. FMVSS 141 establishes performance requirements for pedestrian alert sounds for motor vehicles. The standard applies to hybrid and electric vehicles that have a gross vehicle weight rating of 4,536 KG or less or are defined as low-speed vehicles. The standard became fully applicable to all such vehicles manufactured on or after March 1, 2021.On January 27, 2023, NHTSA opened Defect Petition (DP) 22-005 to evaluate the subject matter described in the petition. On June 24, 2023 and as supplemented on June 25, 2023, the petitioner notified NHTSA he was withdrawing his petition. The petitioner indicated that, based on his review of data, there is no justification for asserting potential benefits that could be derived from actions sought by my petition. Based on the petitioner's withdrawal, DP22-005 is closed. Closure of this DP does not represent a determination by NHTSA regarding the subject matter of the petition.