IllustrationThe vehicle hesitates when engaging accelerator;shifting roughly,stuttering ,mostly under 50 mph.
2021 Ford Edge
Owner reports · Recalls · Investigations
Similar to other model years
Owner complaints for the 2021 Ford Edge do not stand out strongly from the model-year median of 724.
About this comparison →How this year compares
Owner complaints by model year
Compare all Edge years →Counts vary with age, sales and reporting. They are not failure rates.
What owners reported most
All reported categories
Tap a category to read its complaints. One report may name several components.
When problems were reported
Mileage at the reported incident
Limited mileage data: 24 of 110 reports include usable mileage. There isn’t enough coverage to show a useful chart.
NHTSA’s mileage field refers to the reported incident, not necessarily the filing date. This shows report counts, not the likelihood of a failure.
What to inspect
Issues worth paying extra attention to based on owner reports.
- Power Train. Review the 35 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
- Back Over Prevention. Review the 20 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
- Electrical System. Review the 14 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
NHTSA owner reports · September 18, 2026 snapshot.
3 crash reports1 fire reports1 injury reports
What owners actually said
110 reportsI bought a CPO 2021 ford edge titanium from lasco ford of Fenton Mi. When purchasing the vehicle the salesperson repeatedly kept saying the car was clean with a clean car fax checked out by their mechanics but did NOT tell me the vehicle has an open safety recall which me and my wife weren’t told or seen on the car fax not to me…
Read full complaint
I bought a CPO 2021 ford edge titanium from lasco ford of Fenton Mi. When purchasing the vehicle the salesperson repeatedly kept saying the car was clean with a clean car fax checked out by their mechanics but did NOT tell me the vehicle has an open safety recall which me and my wife weren’t told or seen on the car fax not to mention the car broke down right away after we left the dealership at 9:30 at night after closing which in Michigan selling a CPO vehicle with an open safety recall and not telling us is illegal if they checked the vin prior to selling is the vehicle they would have known. I felt that they misled me on the car also doing everything they can to not let me test drive it
Reverse camera goes black with movement in the picture. Can not see to back up for a week or two at a time then it works for a week. Asked Ford dealership about an update for software and they require $175 to diagnose the camera then pay to have he said possibly a new camera installed. It does not alert to people or objects be…
Read full complaint
Reverse camera goes black with movement in the picture. Can not see to back up for a week or two at a time then it works for a week. Asked Ford dealership about an update for software and they require $175 to diagnose the camera then pay to have he said possibly a new camera installed. It does not alert to people or objects behind vehicle during the time the camera goes out.
Vehicle is jolting/jerking when switching gears, stalls out. When put into park mode it starts to reverse and says brake is on and does not release from brake resulting in not being able to turn vehicle off.
The contact owns a 2021 Ford Edge. The contact stated that the rearview camera intermittently went blank while the vehicle was shifted into reverse(R). The contact received notification of NHTSA Campaign Number: 25V315000 (Back Over Prevention); however, the part to do the recall repair was not yet available. The contact stated …
Read full complaint
The contact owns a 2021 Ford Edge. The contact stated that the rearview camera intermittently went blank while the vehicle was shifted into reverse(R). The contact received notification of NHTSA Campaign Number: 25V315000 (Back Over Prevention); however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The contact called the dealer to schedule an appointment for an oil change, and the contact inquired about the status of the recall, and the contact was informed that there was no longer a recall listed for the VIN. The contact stated that the vehicle was never serviced for the recall. The manufacturer was not notified of the failure. The failure mileage was unknown.
I bought the car in October of 2024 with 92,000 miles. Around 99,000 miles or so it started running kinda rough drove like it had less power and is shifting hard. It affected the drivability of the car. I took it to the ford dealership and they quoted me $5,200 for a torque converter. The car is out of warranty and I cannot affo…
Read full complaint
I bought the car in October of 2024 with 92,000 miles. Around 99,000 miles or so it started running kinda rough drove like it had less power and is shifting hard. It affected the drivability of the car. I took it to the ford dealership and they quoted me $5,200 for a torque converter. The car is out of warranty and I cannot afford to fix it and I still owe money on the car. If I knew this was going to be an issue I would not have bought the car. I currently have 107,000 miles on the car and the issue is only getting worse.
I'm am the original owner of my 2021 Edge ST and have kept up with all my scheduled maintenance. Earlier this year, I had my transmission fluid replaced per the 40k maintenance schedule. Since then (and even a little prior to) I can feel the transmission, for lack of a better term, "jutting" and making a very slight "whine" when…
Read full complaint
I'm am the original owner of my 2021 Edge ST and have kept up with all my scheduled maintenance. Earlier this year, I had my transmission fluid replaced per the 40k maintenance schedule. Since then (and even a little prior to) I can feel the transmission, for lack of a better term, "jutting" and making a very slight "whine" when I've decelerated but then gone to reapply acceleration. It mainly seems to be a problem with second gear. I have also had the fuel neck replaced twice now under warranty. The first time was shortly after purchasing the vehicle, it kept tripping the gas pump at every station and I would have to manually trickle the gas in. Then again a year or two ago it started tripping again and they replaced it. I've also had various rattling noises that start out of no where and persist. My moon roof even came from the factory missing pieces that had to get installed only a month after I had the vehicle. The roof is starting to rattle again this year. I have identified that by rolling the sun shade open and closed and finding with the shade opened and rolled up, the rattling stops.
In April of 2025 I got my normal oil change and I mentioned to the technician that the car seems to be jerking more than usual when I start trying to accelerate. They mentioned that the car needed the coolant flushed out and that could be contributing to the issue. I had it done in June. It was not causing the issue but the jerk…
Read full complaint
In April of 2025 I got my normal oil change and I mentioned to the technician that the car seems to be jerking more than usual when I start trying to accelerate. They mentioned that the car needed the coolant flushed out and that could be contributing to the issue. I had it done in June. It was not causing the issue but the jerking got worse. So this month, August 2025, I took the care to Aamco Transmissions and Total Car Care. They did a full systems and diagnostic courtesy check and determined that I need my transmission replaced or rebuilt which is at least $7k. This is a 2021 Ford Edge. I am the only owner. I have 71k miles on the car and never thought that I would have to fully replace a transmission in 4 years.
Front crash assistance unavailable. Camera not working. No auto dimming available either.
The contact owns a 2021 Ford Edge. The contact stated that while driving at speeds above 30 MPH, the vehicle hesitated while accelerating and shuddered abnormally. The vehicle was taken to the local mechanic who replaced the spark plugs; however, the failure persisted. The vehicle was later taken to the local dealer who diagnos…
Read full complaint
The contact owns a 2021 Ford Edge. The contact stated that while driving at speeds above 30 MPH, the vehicle hesitated while accelerating and shuddered abnormally. The vehicle was taken to the local mechanic who replaced the spark plugs; however, the failure persisted. The vehicle was later taken to the local dealer who diagnosed the vehicle and determined that the torque converter was faulty and needed to be replaced. The vehicle was not yet repaired. The manufacturer was notified of the failure and informed the contact that the vehicle was not covered under an Extended Warranty coverage related to the failure. The failure mileage was 70,000.
Official recalls
726V124000 · Back Over Prevention:software
Mar 3, 2026
Ford Motor Company (Ford) is recalling certain 2021-2026 Ford Bronco and 2021-2024 Ford Edge vehicles. The Accessory Protocol Interface Module (APIM) may overheat and shutdown, which can prevent the rearview camera image from displaying as intended.
Consequence & remedy
Consequence: A rearview camera that fails to display an image can reduce the driver’s view behind the vehicle, increasing the risk of a crash.
Remedy: The APIM software will be updated by a dealer, or through an over-the-air (OTA) update, free of charge. Owner notification letters were mailed April 13, 2026. Owners may contact Ford Customer Service at 1-866-436-7332. Ford's number for this recall is 26S09. Vehicle Identification Numbers (VINs) involved in this recall became searchable on NHTSA.gov on March 5, 2026.
25V315000 · Back Over Prevention:software
May 9, 2025
Ford Motor Company (Ford) is recalling certain 2021-2024 Bronco, F-150, 2021-2024 Edge, 2022-2025 Escape, F-250, F-350, F-450, F-550, F-600, 2022-2024 Expedition, 2022-2025 Transit, 2021-2023 Mach-E, 2024 Ranger, Mustang, 2021-2023 Lincoln Nautilus, 2022-2024 Navigator, and 2023-2024 Corsair vehicles. A software error may cause the rearview camera image to delay, freeze, or not display when the vehicle is in reverse.
Consequence & remedy
Consequence: A frozen or missing rearview camera image can reduce the driver's view behind the vehicle, increasing the risk of a crash.
Remedy: The accessory protocol interface module (APIM) software will be updated by a dealer or through an over-the-air update, free of charge. This will be a phased campaign, with the remedy becoming available in different phases based on model and model years. Interim letters notifying owners of the safety risk were mailed on June 26, 2025. Additional letters will be mailed once the final remedy is available on each phase. Owner notification letters were sent on October 8, 2025. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 25S49.
25V160000 · Back Over Prevention:software
Mar 14, 2025
Ford Motor Company (Ford) is recalling certain 2021-2022 Edge vehicles previously repaired incorrectly under recall number 22V-151. A software error may cause the rearview camera to display a blank or distorted image when the vehicle is in reverse.
Consequence & remedy
Consequence: A rearview camera that displays a blank or distorted image can reduce the driver's view of what is behind the vehicle, increasing the risk of a crash.
Remedy: Dealers will update the rearview camera software, free of charge. Owner notification letters were mailed April 25, 2025. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 25S28.
24V635000 · Engine And Engine Cooling:engine:hard Parts Internal/mechanical
Aug 23, 2024
Ford Motor Company (Ford) is recalling certain 2021-2022 Bronco, F-150, Edge, Explorer, Lincoln Nautilus, and Lincoln Aviator vehicles equipped with either a 2.7L or 3.0L Nano EcoBoost engine. The engine intake valves may break while driving, which can result in engine failure and a loss of drive power.
Consequence & remedy
Consequence: A loss of drive power increases the risk of a crash.
Remedy: Dealers will perform an engine cycle test and replace the engine as necessary, free of charge. Owner notification letters were mailed July 3, 2025. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 24S55.
22V151000 · Back Over Prevention:display Function; Back Over Prevention:software
Mar 11, 2022
Ford Motor Company (Ford) is recalling certain 2021-2022 Edge vehicles. A software error may cause the rearview camera to display a blank or distorted image when the vehicle is in reverse.
Consequence & remedy
Consequence: A rearview camera that displays a blank or distorted image can reduce the driver's view of what is behind the vehicle, increasing the risk of a crash.
Remedy: The rearview camera software will be updated by a dealer, or through an over-the-air (OTA) update, free of charge. Owner notification letters were mailed on April 29, 2022. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 22S14.
Additional source detail variants (2)
Back Over Prevention:display Function
Ford Motor Company (Ford) is recalling certain 2021-2022 Edge vehicles. A software error may cause the rearview camera to display a blank or distorted image when the vehicle is in reverse.
Consequence: A rearview camera that displays a blank or distorted image can reduce the driver's view of what is behind the vehicle, increasing the risk of a crash.
Remedy: The rearview camera software will be updated by a dealer, or through an over-the-air (OTA) update, free of charge. Owner notification letters were mailed on April 29, 2022. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 22S14.
Back Over Prevention:software
Ford Motor Company (Ford) is recalling certain 2021-2022 Edge vehicles. A software error may cause the rearview camera to display a blank or distorted image when the vehicle is in reverse.
Consequence: A rearview camera that displays a blank or distorted image can reduce the driver's view of what is behind the vehicle, increasing the risk of a crash.
Remedy: The rearview camera software will be updated by a dealer, or through an over-the-air (OTA) update, free of charge. Owner notification letters were mailed on April 29, 2022. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 22S14.
21V377000 · Seat Belts:front:retractor; Seat Belts:pretensioner
May 24, 2021
Ford Motor Company (Ford) is recalling certain 2021 Edge vehicles. The driver's seat belt retractor pretensioner assembly may not function correctly when activated during a crash. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 208, "Occupant Crash Protection."
Consequence & remedy
Consequence: A seatbelt assembly that does not function as intended can increase the risk of injury during a crash.
Remedy: Dealers will replace the driver's seat belt retractor pretensioner assembly, free of charge. Owner notification letters were mailed on June 15, 2021. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 21C13.
Additional source detail variants (2)
Seat Belts:pretensioner
Ford Motor Company (Ford) is recalling certain 2021 Edge vehicles. The driver's seat belt retractor pretensioner assembly may not function correctly when activated during a crash. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 208, "Occupant Crash Protection."
Consequence: A seatbelt assembly that does not function as intended can increase the risk of injury during a crash.
Remedy: Dealers will replace the driver's seat belt retractor pretensioner assembly, free of charge. Owner notification letters were mailed on June 15, 2021. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 21C13.
Seat Belts:front:retractor
Ford Motor Company (Ford) is recalling certain 2021 Edge vehicles. The driver's seat belt retractor pretensioner assembly may not function correctly when activated during a crash. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 208, "Occupant Crash Protection."
Consequence: A seatbelt assembly that does not function as intended can increase the risk of injury during a crash.
Remedy: Dealers will replace the driver's seat belt retractor pretensioner assembly, free of charge. Owner notification letters were mailed on June 15, 2021. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 21C13.
21V011000 · Power Train:driveline:driveshaft
Jan 15, 2021
Ford Motor Company (Ford) is recalling certain 2020-2021 Edge, 2020 Lincoln Nautilus and Ford Escape and 2021 Lincoln Corsair and Ford Bronco Sport vehicles. An inadequate amount of lubricant in the rear drive unit may cause seizure of the rear drive axle.
Consequence & remedy
Consequence: If the rear drive unit seizes, there may be a loss of drive and/or a loss of vehicle control, increasing the risk of a crash.
Remedy: Ford will notify owners, and dealers will check the rear drive unit lubricant level. Axles found to have lubricant at the minimum level will be filled to the full level. Axles found to be below the minimum lubricant fill level will be replaced, free of charge. This recall began March 12, 2021. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 21S02.
Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗
NHTSA investigations
1EA23002 · Loss Of Motive Power
Opened Sep 29, 2023 · Closed Oct 31, 2024
Status: closed (inferred from source dates) · Engine
On July 22, 2022, the Office of Defects Investigation (ODI) granted a Defect Petition (DP22001) and opened a Preliminary Evaluation (PE22007) to investigate allegations of loss of motive power in model year (MY) 2021 Ford Bronco vehicles equipped with 2.7L EcoBoost engines. Complainants were reporting sudden engine failure while driving resulting in a loss of motive power, often without the ability to restart. During PE22007, the cause of engine failure and loss of motive power in the subject vehicles was determined to be intake valve fracture, and the full scope of vehicles affected by the subject defect was identified as all MY 2021-2022 Ford and Lincoln models equipped with either the 2.7L or 3.0L EcoBoost engines, referred to as the “Nano” engine family. If an intake valve fractures in the subject engines, it may drop into the cylinder and contact the piston, often resulting in catastrophic engine damage. On September 29, 2023, PE22007 was upgraded to an Engineering Analysis (EA23002) to further investigate the subject defect across the full scope of affected vehicles. During EA23002, ODI visited Ford facilities to review technical information related to intake valve fracture in “Nano” engines, coordinated with NHTSA’s Vehicle Research and Testing Center (VRTC), and analyzed updated field data relating the subject defect. Forensic analysis of fractured intake valves demonstrated that the defective components exhibited “grinding burn” or out of specification hardness in the area of the keeper grooves. The presence of grinding burn is evidence that during the groove grinding phase of production, the temperature of the valve became sufficiently high to alter the microstructure of the material and is indicative that the valve supplier’s manufacturing processes were not within control specifications. Grinding burn results in a hard, brittle microstructure and high residual stresses toward the surface of the valve. Through normal engine loading, a valve with grinding burn will likely fracture at the area of highest vulnerability, which is the third keeper groove. In its response to the EA23002 Information Request (IR) letter, Ford provided evidence of 396 customer complaints (including field reports), 825 warranty claims, and 936 engine exchanges. When considering both ODI and manufacturer failure report data, there have been reports representing 1066 unique vehicles within the subject vehicle population. Analysis of the failure report data demonstrates that vehicles equipped with potentially defective intake valves were built within a production “spike period” of May 2021 – October 2021. The beginning of the spike period corresponds to a ramp up in production at the valve supplier manufacturing facility, and the end of the spike period aligns with the implementation of several mid-production process improvements and the decision to change the metal alloy used to produce intake valves from “Silchrome Lite” to “Silchrome 1”. Ford began investigating the subject defect in July 2021, determined the root cause, and took corrective measures for the new production vehicles. Analysis of the failure report data demonstrates that these corrective actions were successful in eliminating the risk of intake valve fracture for subject vehicles produced after October 2021. However, Ford did not take any field action to address vehicles produced during the spike period, and in the several months following the implementation of the production changes, a significant number of field failures continued to occur. It is Ford’s assessment that not all valves produced during the spike period are defective, and that failures associated with the subject defect occur at low time in service. Analysis of the failure report data demonstrates that the vast majority of failures have occurred before 20,000 miles with over half of all reported failures occurring before 5,000 miles. The rate of reported failures related to the subject defect has steadily decreased since November 2021. ODI coordinated with NHTSA’s National Center for Statistics and Analysis (NCSA) to conduct statistical analysis and predict the number of future failures associated with the subject defect. The results of this analysis, and the trends identified through the failure report data are generally consistent with Ford’s assessment that defective intake valves will likely fail at a low time in service and indicate that the majority of subject vehicles equipped with defective valves have already experienced a failure. On August 23, 2024, Ford submitted recall 24V635 for subject vehicles equipped with “Nano” engines and built within the production spike period identified above (total population 90,736 vehicles). The remedy includes an inspection at a Ford/Lincoln dealership where the lifetime engine cycles of the vehicle will be determined. If a vehicle does not meet a threshold for lifetime engine cycles, the dealership will conduct a high RPM engine cycle accumulation procedure, which aims to identify if the vehicle is equipped with defective intake valves. Any vehicle that fails the accumulation procedure will receive an engine replacement under the recall. In addition to recall 24V635, Ford has stated that it will launch customer satisfaction campaign 24N12, which will provide extended warranty coverage to the subject vehicles through the earlier of 10 years or 150,000 miles. In view of the recall action being taken by Ford, ODI is closing this Engineering Analysis. To review the reports cited in the Closing Resume ODI Report Identification Number document, go to NHTSA.gov.