IllustrationWhen driving at lower speeds the car jerks/misses. A local Ford dealership confirmed it's the torque converter. Even purchased a warranty that is suppose to cover the issue and even they are being difficult about wanting to fix it!
2021 Ford Edge
Owner reports · Recalls · Investigations
Similar to other model years
Owner complaints for the 2021 Ford Edge do not stand out strongly from the model-year median of 724.
About this comparison →How this year compares
Owner complaints by model year
Compare all Edge years →Counts vary with age, sales and reporting. They are not failure rates.
What owners reported most
All reported categories
Tap a category to read its complaints. One report may name several components.
When problems were reported
Mileage at the reported incident
Limited mileage data: 24 of 110 reports include usable mileage. There isn’t enough coverage to show a useful chart.
NHTSA’s mileage field refers to the reported incident, not necessarily the filing date. This shows report counts, not the likelihood of a failure.
What to inspect
Issues worth paying extra attention to based on owner reports.
- Power Train. Review the 35 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
- Back Over Prevention. Review the 20 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
- Electrical System. Review the 14 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
NHTSA owner reports · September 18, 2026 snapshot.
3 crash reports1 fire reports1 injury reports
Engine complaints
11 reportsThere should be a recall on the sunvisors. Because it is a safety issue, because when the Sun is in your face and you can't see driving it can very well cause an accident or getting a ticket for not being able to see your speed that you're going, because you're so far up trying to get the Sun out of your face. You can't see any …
Read full complaint
There should be a recall on the sunvisors. Because it is a safety issue, because when the Sun is in your face and you can't see driving it can very well cause an accident or getting a ticket for not being able to see your speed that you're going, because you're so far up trying to get the Sun out of your face. You can't see any of the controls or your dashboard.. That is a safety hazard. My driver's side one is broken. I can't use it at all and I'm not paying $200 to get it fixed. That's insane on top of that.My passenger side is one is starting to break as well. Also, my car is very sluggish. When i'm driving, it is sluggish back and forth like it doesn't get good acceleration.There should be a recall for that.As well. I've also noticed when I'm stopped at a light, and I slowly let off the brake the car start to jump.
Torque converter needs a replacing
My vehicle was recalled by the manufacturer for possibly defective intake valves. The manufacturer did a destructive test on the valves, This test consisted of running the car at 4500 rpm (approximately 120 mph) for a period of approximately 50 minutes. Since this test my car has undergone 3 transmission repairs. Any of thes…
Read full complaint
My vehicle was recalled by the manufacturer for possibly defective intake valves. The manufacturer did a destructive test on the valves, This test consisted of running the car at 4500 rpm (approximately 120 mph) for a period of approximately 50 minutes. Since this test my car has undergone 3 transmission repairs. Any of these conditions could have resulted in being stranded on the road or possibly losing control of the vehicle, The test only makes the assumption that if the valves did not fail during the test they will continue to provide adequate and safe service. This is not necessarily true. The valves may fail on the highway causing loss of control, I believe that my vehicle was damaged by this test. My vehicle has a little over 30, 000 miles and had no damage before this test. The manufacturer should make this good on the intake valves by replacing them on the 90,000+ vehicles subject to this recall.
Transmission causing jerking, shuddering and take off issues. It was diagnosed as the torque converter messed up in the transmission. My safety is at risk of being reared in as the car hesitates to go in gear and to shift properly.
In April of 2025 I got my normal oil change and I mentioned to the technician that the car seems to be jerking more than usual when I start trying to accelerate. They mentioned that the car needed the coolant flushed out and that could be contributing to the issue. I had it done in June. It was not causing the issue but the jerk…
Read full complaint
In April of 2025 I got my normal oil change and I mentioned to the technician that the car seems to be jerking more than usual when I start trying to accelerate. They mentioned that the car needed the coolant flushed out and that could be contributing to the issue. I had it done in June. It was not causing the issue but the jerking got worse. So this month, August 2025, I took the care to Aamco Transmissions and Total Car Care. They did a full systems and diagnostic courtesy check and determined that I need my transmission replaced or rebuilt which is at least $7k. This is a 2021 Ford Edge. I am the only owner. I have 71k miles on the car and never thought that I would have to fully replace a transmission in 4 years.
The contact owns a 2021 Ford Edge. The contact stated that a week after the check engine warning light had illuminated, the vehicle was difficult to start after refueling at the gas station. The contact stated that the vehicle was able to start after several attempts. Additionally, the contact stated that upon starting, the vehi…
Read full complaint
The contact owns a 2021 Ford Edge. The contact stated that a week after the check engine warning light had illuminated, the vehicle was difficult to start after refueling at the gas station. The contact stated that the vehicle was able to start after several attempts. Additionally, the contact stated that upon starting, the vehicle emitted an abnormally strong odor. The vehicle was taken to Parkway Service Center and to O'Reilly Auto, where diagnostic trouble codes 4056 and 4096, indicating an EVAP purge valve failure were retrieved. The vehicle was not repaired. The dealer was not notified of the failure. The manufacturer was contacted and informed the contact that the VIN was not included in a recall. The manufacturer advised the contact to report the failure to the NHTSA Hotline. The failure mileage was approximately 124,000.
While driving under multiple circumstances, while rolling from a stop or in gear already, the transmission will unsafely move on its own power. It will stutter if I hit the gas. It will not go sometimes and other times it will be so delayed that after I left my foot off the gas, the transmission will then go.
The contact owns a 2021 Ford Edge. The contact stated that when the vehicle was started, there was an engine misfire. In addition, the contact stated that the vehicle was consuming an excessive amount of coolant. The contact who is an independent mechanic, diagnosed the vehicle and determined that there was coolant intrusion in …
Read full complaint
The contact owns a 2021 Ford Edge. The contact stated that when the vehicle was started, there was an engine misfire. In addition, the contact stated that the vehicle was consuming an excessive amount of coolant. The contact who is an independent mechanic, diagnosed the vehicle and determined that there was coolant intrusion in cylinder #3 and that the head gasket was leaking. The contact was informed that the engine needed to be replaced. The vehicle was not repaired. The contact researched and found an unknown recall; however, the VIN was not included in the recall. The manufacturer was made aware of the failure and a case was filed. The contact was advised to report the failure to the NHTSA Hotline. The failure mileage was unknown.
The contact owns a 2021 Ford Edge. The contact stated that while accelerating, the vehicle jerked and went into low-power mode. While at a stop, the contact depressed the accelerator pedal, and the vehicle surged forward. After using the phone charger, the phone charger overheated. The contact unplugged the phones. The contact s…
Read full complaint
The contact owns a 2021 Ford Edge. The contact stated that while accelerating, the vehicle jerked and went into low-power mode. While at a stop, the contact depressed the accelerator pedal, and the vehicle surged forward. After using the phone charger, the phone charger overheated. The contact unplugged the phones. The contact stated that the steering wheel was hot to the touch. There was an abnormal burning odor detected. The check engine warning light was illuminated. The vehicle was taken to an independent mechanic and the contact was informed that the failure was related to the turbo-eco boost and engine. The sensors, valves, brackets, and hoses were replaced, but the failure recurred. The local dealer was not contacted. The manufacturer was contacted, but no assistance was provided. The approximate failure mileage was 44,000.
Official recalls
726V124000 · Back Over Prevention:software
Mar 3, 2026
Ford Motor Company (Ford) is recalling certain 2021-2026 Ford Bronco and 2021-2024 Ford Edge vehicles. The Accessory Protocol Interface Module (APIM) may overheat and shutdown, which can prevent the rearview camera image from displaying as intended.
Consequence & remedy
Consequence: A rearview camera that fails to display an image can reduce the driver’s view behind the vehicle, increasing the risk of a crash.
Remedy: The APIM software will be updated by a dealer, or through an over-the-air (OTA) update, free of charge. Owner notification letters were mailed April 13, 2026. Owners may contact Ford Customer Service at 1-866-436-7332. Ford's number for this recall is 26S09. Vehicle Identification Numbers (VINs) involved in this recall became searchable on NHTSA.gov on March 5, 2026.
25V315000 · Back Over Prevention:software
May 9, 2025
Ford Motor Company (Ford) is recalling certain 2021-2024 Bronco, F-150, 2021-2024 Edge, 2022-2025 Escape, F-250, F-350, F-450, F-550, F-600, 2022-2024 Expedition, 2022-2025 Transit, 2021-2023 Mach-E, 2024 Ranger, Mustang, 2021-2023 Lincoln Nautilus, 2022-2024 Navigator, and 2023-2024 Corsair vehicles. A software error may cause the rearview camera image to delay, freeze, or not display when the vehicle is in reverse.
Consequence & remedy
Consequence: A frozen or missing rearview camera image can reduce the driver's view behind the vehicle, increasing the risk of a crash.
Remedy: The accessory protocol interface module (APIM) software will be updated by a dealer or through an over-the-air update, free of charge. This will be a phased campaign, with the remedy becoming available in different phases based on model and model years. Interim letters notifying owners of the safety risk were mailed on June 26, 2025. Additional letters will be mailed once the final remedy is available on each phase. Owner notification letters were sent on October 8, 2025. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 25S49.
25V160000 · Back Over Prevention:software
Mar 14, 2025
Ford Motor Company (Ford) is recalling certain 2021-2022 Edge vehicles previously repaired incorrectly under recall number 22V-151. A software error may cause the rearview camera to display a blank or distorted image when the vehicle is in reverse.
Consequence & remedy
Consequence: A rearview camera that displays a blank or distorted image can reduce the driver's view of what is behind the vehicle, increasing the risk of a crash.
Remedy: Dealers will update the rearview camera software, free of charge. Owner notification letters were mailed April 25, 2025. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 25S28.
24V635000 · Engine And Engine Cooling:engine:hard Parts Internal/mechanical
Aug 23, 2024
Ford Motor Company (Ford) is recalling certain 2021-2022 Bronco, F-150, Edge, Explorer, Lincoln Nautilus, and Lincoln Aviator vehicles equipped with either a 2.7L or 3.0L Nano EcoBoost engine. The engine intake valves may break while driving, which can result in engine failure and a loss of drive power.
Consequence & remedy
Consequence: A loss of drive power increases the risk of a crash.
Remedy: Dealers will perform an engine cycle test and replace the engine as necessary, free of charge. Owner notification letters were mailed July 3, 2025. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 24S55.
22V151000 · Back Over Prevention:display Function; Back Over Prevention:software
Mar 11, 2022
Ford Motor Company (Ford) is recalling certain 2021-2022 Edge vehicles. A software error may cause the rearview camera to display a blank or distorted image when the vehicle is in reverse.
Consequence & remedy
Consequence: A rearview camera that displays a blank or distorted image can reduce the driver's view of what is behind the vehicle, increasing the risk of a crash.
Remedy: The rearview camera software will be updated by a dealer, or through an over-the-air (OTA) update, free of charge. Owner notification letters were mailed on April 29, 2022. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 22S14.
Additional source detail variants (2)
Back Over Prevention:display Function
Ford Motor Company (Ford) is recalling certain 2021-2022 Edge vehicles. A software error may cause the rearview camera to display a blank or distorted image when the vehicle is in reverse.
Consequence: A rearview camera that displays a blank or distorted image can reduce the driver's view of what is behind the vehicle, increasing the risk of a crash.
Remedy: The rearview camera software will be updated by a dealer, or through an over-the-air (OTA) update, free of charge. Owner notification letters were mailed on April 29, 2022. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 22S14.
Back Over Prevention:software
Ford Motor Company (Ford) is recalling certain 2021-2022 Edge vehicles. A software error may cause the rearview camera to display a blank or distorted image when the vehicle is in reverse.
Consequence: A rearview camera that displays a blank or distorted image can reduce the driver's view of what is behind the vehicle, increasing the risk of a crash.
Remedy: The rearview camera software will be updated by a dealer, or through an over-the-air (OTA) update, free of charge. Owner notification letters were mailed on April 29, 2022. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 22S14.
21V377000 · Seat Belts:front:retractor; Seat Belts:pretensioner
May 24, 2021
Ford Motor Company (Ford) is recalling certain 2021 Edge vehicles. The driver's seat belt retractor pretensioner assembly may not function correctly when activated during a crash. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 208, "Occupant Crash Protection."
Consequence & remedy
Consequence: A seatbelt assembly that does not function as intended can increase the risk of injury during a crash.
Remedy: Dealers will replace the driver's seat belt retractor pretensioner assembly, free of charge. Owner notification letters were mailed on June 15, 2021. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 21C13.
Additional source detail variants (2)
Seat Belts:pretensioner
Ford Motor Company (Ford) is recalling certain 2021 Edge vehicles. The driver's seat belt retractor pretensioner assembly may not function correctly when activated during a crash. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 208, "Occupant Crash Protection."
Consequence: A seatbelt assembly that does not function as intended can increase the risk of injury during a crash.
Remedy: Dealers will replace the driver's seat belt retractor pretensioner assembly, free of charge. Owner notification letters were mailed on June 15, 2021. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 21C13.
Seat Belts:front:retractor
Ford Motor Company (Ford) is recalling certain 2021 Edge vehicles. The driver's seat belt retractor pretensioner assembly may not function correctly when activated during a crash. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 208, "Occupant Crash Protection."
Consequence: A seatbelt assembly that does not function as intended can increase the risk of injury during a crash.
Remedy: Dealers will replace the driver's seat belt retractor pretensioner assembly, free of charge. Owner notification letters were mailed on June 15, 2021. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 21C13.
21V011000 · Power Train:driveline:driveshaft
Jan 15, 2021
Ford Motor Company (Ford) is recalling certain 2020-2021 Edge, 2020 Lincoln Nautilus and Ford Escape and 2021 Lincoln Corsair and Ford Bronco Sport vehicles. An inadequate amount of lubricant in the rear drive unit may cause seizure of the rear drive axle.
Consequence & remedy
Consequence: If the rear drive unit seizes, there may be a loss of drive and/or a loss of vehicle control, increasing the risk of a crash.
Remedy: Ford will notify owners, and dealers will check the rear drive unit lubricant level. Axles found to have lubricant at the minimum level will be filled to the full level. Axles found to be below the minimum lubricant fill level will be replaced, free of charge. This recall began March 12, 2021. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 21S02.
Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗
NHTSA investigations
1EA23002 · Loss Of Motive Power
Opened Sep 29, 2023 · Closed Oct 31, 2024
Status: closed (inferred from source dates) · Engine
On July 22, 2022, the Office of Defects Investigation (ODI) granted a Defect Petition (DP22001) and opened a Preliminary Evaluation (PE22007) to investigate allegations of loss of motive power in model year (MY) 2021 Ford Bronco vehicles equipped with 2.7L EcoBoost engines. Complainants were reporting sudden engine failure while driving resulting in a loss of motive power, often without the ability to restart. During PE22007, the cause of engine failure and loss of motive power in the subject vehicles was determined to be intake valve fracture, and the full scope of vehicles affected by the subject defect was identified as all MY 2021-2022 Ford and Lincoln models equipped with either the 2.7L or 3.0L EcoBoost engines, referred to as the “Nano” engine family. If an intake valve fractures in the subject engines, it may drop into the cylinder and contact the piston, often resulting in catastrophic engine damage. On September 29, 2023, PE22007 was upgraded to an Engineering Analysis (EA23002) to further investigate the subject defect across the full scope of affected vehicles. During EA23002, ODI visited Ford facilities to review technical information related to intake valve fracture in “Nano” engines, coordinated with NHTSA’s Vehicle Research and Testing Center (VRTC), and analyzed updated field data relating the subject defect. Forensic analysis of fractured intake valves demonstrated that the defective components exhibited “grinding burn” or out of specification hardness in the area of the keeper grooves. The presence of grinding burn is evidence that during the groove grinding phase of production, the temperature of the valve became sufficiently high to alter the microstructure of the material and is indicative that the valve supplier’s manufacturing processes were not within control specifications. Grinding burn results in a hard, brittle microstructure and high residual stresses toward the surface of the valve. Through normal engine loading, a valve with grinding burn will likely fracture at the area of highest vulnerability, which is the third keeper groove. In its response to the EA23002 Information Request (IR) letter, Ford provided evidence of 396 customer complaints (including field reports), 825 warranty claims, and 936 engine exchanges. When considering both ODI and manufacturer failure report data, there have been reports representing 1066 unique vehicles within the subject vehicle population. Analysis of the failure report data demonstrates that vehicles equipped with potentially defective intake valves were built within a production “spike period” of May 2021 – October 2021. The beginning of the spike period corresponds to a ramp up in production at the valve supplier manufacturing facility, and the end of the spike period aligns with the implementation of several mid-production process improvements and the decision to change the metal alloy used to produce intake valves from “Silchrome Lite” to “Silchrome 1”. Ford began investigating the subject defect in July 2021, determined the root cause, and took corrective measures for the new production vehicles. Analysis of the failure report data demonstrates that these corrective actions were successful in eliminating the risk of intake valve fracture for subject vehicles produced after October 2021. However, Ford did not take any field action to address vehicles produced during the spike period, and in the several months following the implementation of the production changes, a significant number of field failures continued to occur. It is Ford’s assessment that not all valves produced during the spike period are defective, and that failures associated with the subject defect occur at low time in service. Analysis of the failure report data demonstrates that the vast majority of failures have occurred before 20,000 miles with over half of all reported failures occurring before 5,000 miles. The rate of reported failures related to the subject defect has steadily decreased since November 2021. ODI coordinated with NHTSA’s National Center for Statistics and Analysis (NCSA) to conduct statistical analysis and predict the number of future failures associated with the subject defect. The results of this analysis, and the trends identified through the failure report data are generally consistent with Ford’s assessment that defective intake valves will likely fail at a low time in service and indicate that the majority of subject vehicles equipped with defective valves have already experienced a failure. On August 23, 2024, Ford submitted recall 24V635 for subject vehicles equipped with “Nano” engines and built within the production spike period identified above (total population 90,736 vehicles). The remedy includes an inspection at a Ford/Lincoln dealership where the lifetime engine cycles of the vehicle will be determined. If a vehicle does not meet a threshold for lifetime engine cycles, the dealership will conduct a high RPM engine cycle accumulation procedure, which aims to identify if the vehicle is equipped with defective intake valves. Any vehicle that fails the accumulation procedure will receive an engine replacement under the recall. In addition to recall 24V635, Ford has stated that it will launch customer satisfaction campaign 24N12, which will provide extended warranty coverage to the subject vehicles through the earlier of 10 years or 150,000 miles. In view of the recall action being taken by Ford, ODI is closing this Engineering Analysis. To review the reports cited in the Closing Resume ODI Report Identification Number document, go to NHTSA.gov.