Power Train. Review the 35 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
Back Over Prevention. Review the 20 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
Electrical System. Review the 14 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →

NHTSA owner reports · September 18, 2026 snapshot.

3 crash reports1 fire reports1 injury reports

Forward Collision Avoidance complaints

8 reports

Clear category filter

Mileage unknown · Jul 30, 2025

Forward Collision AvoidanceUnknown Or Other

Front crash assistance unavailable. Camera not working. No auto dimming available either.

NHTSA ODI #11677400

45,000 miles · Jul 8, 2025

Back Over PreventionElectrical SystemForward Collision Avoidance

Read full complaint

The contact owns a 2021 Ford Escape. The contact received notification of NHTSA Campaign Number: 25V315000 (Back Over Prevention); however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The contact stated that the infotainment center screen blacked out intermittently. A message indicating that a blocked cylinder was causing the cruise control to fail to engage was displayed on the infotainment center. The contact stated that the cruise control would disengage independently after approximately two minutes. Additionally, the contact stated that the Forward Collision Avoidance: Automatic Emergency Braking and other collision mitigation systems failed to function as needed while driving. The dealer was contacted and confirmed that the part to do the recall repair was not yet available. A second dealer was contacted, Chiefland Ford (916 N Young Blvd, Chiefland, FL 32626) and confirmed that parts were not yet available. The manufacturer was made aware of the issue. The failure mileage was approximately 45,000. VIN tool confirms parts not available.

NHTSA ODI #11671875

Mileage unknown · Feb 4, 2024

Electrical SystemForward Collision AvoidanceVehicle Speed Control

I took my car into the dealership because my crash sensor light kept coming on & my cruise control wouldn’t work. The dealer said that the crash sensor bracket was fractured & the dealer wouldn’t repair it under warranty. The bracket wasn’t repaired, they wanted $595.00 to repair it. This is the same complaint as NHTSA ID# 11506…

Read full complaint

NHTSA ODI #11569757

Mileage unknown · Jan 8, 2024

Forward Collision AvoidanceService BrakesCrash

Read full complaint

I was driving the Ford Edge and the roads were a little slick so I was driving very slow. I was about 2 blocks from my house when I needed to engage the brakes to come to a complete stop, which happened to be going downhill toward a stop sign that intersected with a freeway off ramp. Both the brakes and ABS failed to engage and I hit a guard rail across the intersection. This caused significant damage to my vehicle and was very lucky that no one was hurt. The "Check Brake System" only came up after I ran into the guard rail, which was also the only time I needed to fully engage the brake to come to a full stop. The shop confirmed that the accident would not have damaged the brakes.

NHTSA ODI #11564144

Mileage unknown · Sep 7, 2022

Forward Collision Avoidance

Read full complaint

FORD DID AN OVER THE AIR UPDATE CLAIMING TO FIX A REAR DISTORTION CAMERA… I TOOK TO DEALERSHIP (SARASOTA FORD TO FIX) THAT OVER THE AIR UPDATE CAUSE MY FRONT FORWARD CAMERA TO NO LONGER WORK.. MY VEHICLE IS NOW OVER A YEAR OLD AND I HAVE BEEN MAKING PAYMENTS… I HAVE 4 CASE NUMBERS, SPOKE WITH PLENTLY OF MOTHER FORD PEOPLE PLUS ITS LIVED AT THE DEALERSHIP … THEY HAVE NO FIX… AND THEY MAKE SURE THEY RELEASE MY CAR AT THE 5 DAY MARK, SO I CANNOT GET A BUY BACK…. I WAS DENIED A BUYBACK BC MY VEHICLE WASNT THERE “LONG ENOUGH” REALLY? THERE IS MANY MANY FOLKS WITH SAME ISSUE…. THIS IS A DANGER ISSUE WHEN U CANNOT SEE WHAT IS INFRONT OF THIS CAMERA BC IT STOPPED WORKING… I PURCHASED A 56K PLUS CAR AND NO ONE WILL HELP ME… PERHAPS A CLASS ACTION SUIT TO BUY BACK OR FIX THIS ISSUE?

NHTSA ODI #11483326

Mileage unknown · Sep 7, 2022

Electrical SystemForward Collision AvoidanceVehicle Speed Control

Read full complaint

IN feb 2022 my dash produced a pre-collision assist not avaible and also a adaptive cruise not available sensor blocked see manual. when i tried to tap the button for cruise control it would show set speed , but wouldn't let me . i called ricart ford in ohio and took it to them . they said it was the cruise control manual bracket had been damaged by outside force( a rock) and ford wouldn't fix it. Mind you I have never hit anything with this vehicle. Ricart refused todo anything so i contacted ford and they said take it to a different dealership . Took it to donley inohio they said a bird. Now the screen gltiches, the front camera doesn't work , the hatch will open and shut multiple times and when shutting the moon roof it will stop and go back . Then it made a sound and sounded like the gearbox, also car alarm went off , while running in park , nothing touching keys. Also the all wheel drive light will come on and say dissabled.

NHTSA ODI #11483247

Mileage unknown · Jul 10, 2022

Forward Collision AvoidanceVisibility/wiper

Ford recently responded to a recall concerning the back up camera, and updated the software package. Since that time, the forward camera no longer works. The camera is used daily for parking purposes.

NHTSA ODI #11473216

Mileage unknown · May 27, 2022

Forward Collision Avoidance

Read full complaint

On April 26, 2022 the dealer performed the recall (Ford 22S!4) a software fix to correct a rear camera problem, I was NOT experiencing on my 2021 Ford Edge ST. It took the entire day to do the procedure, and after getting the car back, I experienced what seemed to be some temporary problems, but the main problem being the front camera not operating as designed. I brought the vehicle back to the dealer on May 3 2022, and as of the date of this communication, May 27, 2022 they have not been able to correct the problem I will be without use of the vehicle for one month as of May 31, 2022. Consumer stated her 2021 Ford Edge ST front camera, not working after the recall for the rear camera was done.

NHTSA ODI #11466360

Official recalls

26V124000 · Back Over Prevention:software

Mar 3, 2026

Ford Motor Company (Ford) is recalling certain 2021-2026 Ford Bronco and 2021-2024 Ford Edge vehicles. The Accessory Protocol Interface Module (APIM) may overheat and shutdown, which can prevent the rearview camera image from displaying as intended.

Consequence & remedy

Consequence: A rearview camera that fails to display an image can reduce the driver’s view behind the vehicle, increasing the risk of a crash.

Remedy: The APIM software will be updated by a dealer, or through an over-the-air (OTA) update, free of charge. Owner notification letters were mailed April 13, 2026. Owners may contact Ford Customer Service at 1-866-436-7332. Ford's number for this recall is 26S09. Vehicle Identification Numbers (VINs) involved in this recall became searchable on NHTSA.gov on March 5, 2026.

25V315000 · Back Over Prevention:software

May 9, 2025

Ford Motor Company (Ford) is recalling certain 2021-2024 Bronco, F-150, 2021-2024 Edge, 2022-2025 Escape, F-250, F-350, F-450, F-550, F-600, 2022-2024 Expedition, 2022-2025 Transit, 2021-2023 Mach-E, 2024 Ranger, Mustang, 2021-2023 Lincoln Nautilus, 2022-2024 Navigator, and 2023-2024 Corsair vehicles. A software error may cause the rearview camera image to delay, freeze, or not display when the vehicle is in reverse.

Consequence & remedy

Consequence: A frozen or missing rearview camera image can reduce the driver's view behind the vehicle, increasing the risk of a crash.

Remedy: The accessory protocol interface module (APIM) software will be updated by a dealer or through an over-the-air update, free of charge. This will be a phased campaign, with the remedy becoming available in different phases based on model and model years. Interim letters notifying owners of the safety risk were mailed on June 26, 2025. Additional letters will be mailed once the final remedy is available on each phase. Owner notification letters were sent on October 8, 2025. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 25S49.

25V160000 · Back Over Prevention:software

Mar 14, 2025

Ford Motor Company (Ford) is recalling certain 2021-2022 Edge vehicles previously repaired incorrectly under recall number 22V-151. A software error may cause the rearview camera to display a blank or distorted image when the vehicle is in reverse.

Consequence & remedy

Consequence: A rearview camera that displays a blank or distorted image can reduce the driver's view of what is behind the vehicle, increasing the risk of a crash.

Remedy: Dealers will update the rearview camera software, free of charge. Owner notification letters were mailed April 25, 2025. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 25S28.

24V635000 · Engine And Engine Cooling:engine:hard Parts Internal/mechanical

Aug 23, 2024

Ford Motor Company (Ford) is recalling certain 2021-2022 Bronco, F-150, Edge, Explorer, Lincoln Nautilus, and Lincoln Aviator vehicles equipped with either a 2.7L or 3.0L Nano EcoBoost engine. The engine intake valves may break while driving, which can result in engine failure and a loss of drive power.

Consequence & remedy

Consequence: A loss of drive power increases the risk of a crash.

Remedy: Dealers will perform an engine cycle test and replace the engine as necessary, free of charge. Owner notification letters were mailed July 3, 2025. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 24S55.

22V151000 · Back Over Prevention:display Function; Back Over Prevention:software

Mar 11, 2022

Ford Motor Company (Ford) is recalling certain 2021-2022 Edge vehicles. A software error may cause the rearview camera to display a blank or distorted image when the vehicle is in reverse.

Consequence & remedy

Consequence: A rearview camera that displays a blank or distorted image can reduce the driver's view of what is behind the vehicle, increasing the risk of a crash.

Remedy: The rearview camera software will be updated by a dealer, or through an over-the-air (OTA) update, free of charge. Owner notification letters were mailed on April 29, 2022. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 22S14.

Additional source detail variants (2)

Back Over Prevention:display Function

Ford Motor Company (Ford) is recalling certain 2021-2022 Edge vehicles. A software error may cause the rearview camera to display a blank or distorted image when the vehicle is in reverse.

Consequence: A rearview camera that displays a blank or distorted image can reduce the driver's view of what is behind the vehicle, increasing the risk of a crash.

Remedy: The rearview camera software will be updated by a dealer, or through an over-the-air (OTA) update, free of charge. Owner notification letters were mailed on April 29, 2022. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 22S14.

Back Over Prevention:software

Ford Motor Company (Ford) is recalling certain 2021-2022 Edge vehicles. A software error may cause the rearview camera to display a blank or distorted image when the vehicle is in reverse.

Consequence: A rearview camera that displays a blank or distorted image can reduce the driver's view of what is behind the vehicle, increasing the risk of a crash.

21V377000 · Seat Belts:front:retractor; Seat Belts:pretensioner

May 24, 2021

Ford Motor Company (Ford) is recalling certain 2021 Edge vehicles. The driver's seat belt retractor pretensioner assembly may not function correctly when activated during a crash. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 208, "Occupant Crash Protection."

Consequence & remedy

Consequence: A seatbelt assembly that does not function as intended can increase the risk of injury during a crash.

Remedy: Dealers will replace the driver's seat belt retractor pretensioner assembly, free of charge. Owner notification letters were mailed on June 15, 2021. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 21C13.

Additional source detail variants (2)

Seat Belts:pretensioner

Consequence: A seatbelt assembly that does not function as intended can increase the risk of injury during a crash.

Remedy: Dealers will replace the driver's seat belt retractor pretensioner assembly, free of charge. Owner notification letters were mailed on June 15, 2021. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 21C13.

Seat Belts:front:retractor

Consequence: A seatbelt assembly that does not function as intended can increase the risk of injury during a crash.

21V011000 · Power Train:driveline:driveshaft

Jan 15, 2021

Ford Motor Company (Ford) is recalling certain 2020-2021 Edge, 2020 Lincoln Nautilus and Ford Escape and 2021 Lincoln Corsair and Ford Bronco Sport vehicles. An inadequate amount of lubricant in the rear drive unit may cause seizure of the rear drive axle.

Consequence & remedy

Consequence: If the rear drive unit seizes, there may be a loss of drive and/or a loss of vehicle control, increasing the risk of a crash.

Remedy: Ford will notify owners, and dealers will check the rear drive unit lubricant level. Axles found to have lubricant at the minimum level will be filled to the full level. Axles found to be below the minimum lubricant fill level will be replaced, free of charge. This recall began March 12, 2021. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 21S02.

Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗

NHTSA investigations

EA23002 · Loss Of Motive Power

Opened Sep 29, 2023 · Closed Oct 31, 2024

Status: closed (inferred from source dates) · Engine

On July 22, 2022, the Office of Defects Investigation (ODI) granted a Defect Petition (DP22001) and opened a Preliminary Evaluation (PE22007) to investigate allegations of loss of motive power in model year (MY) 2021 Ford Bronco vehicles equipped with 2.7L EcoBoost engines. Complainants were reporting sudden engine failure while driving resulting in a loss of motive power, often without the ability to restart. During PE22007, the cause of engine failure and loss of motive power in the subject vehicles was determined to be intake valve fracture, and the full scope of vehicles affected by the subject defect was identified as all MY 2021-2022 Ford and Lincoln models equipped with either the 2.7L or 3.0L EcoBoost engines, referred to as the “Nano” engine family. If an intake valve fractures in the subject engines, it may drop into the cylinder and contact the piston, often resulting in catastrophic engine damage. On September 29, 2023, PE22007 was upgraded to an Engineering Analysis (EA23002) to further investigate the subject defect across the full scope of affected vehicles. During EA23002, ODI visited Ford facilities to review technical information related to intake valve fracture in “Nano” engines, coordinated with NHTSA’s Vehicle Research and Testing Center (VRTC), and analyzed updated field data relating the subject defect. Forensic analysis of fractured intake valves demonstrated that the defective components exhibited “grinding burn” or out of specification hardness in the area of the keeper grooves. The presence of grinding burn is evidence that during the groove grinding phase of production, the temperature of the valve became sufficiently high to alter the microstructure of the material and is indicative that the valve supplier’s manufacturing processes were not within control specifications. Grinding burn results in a hard, brittle microstructure and high residual stresses toward the surface of the valve. Through normal engine loading, a valve with grinding burn will likely fracture at the area of highest vulnerability, which is the third keeper groove. In its response to the EA23002 Information Request (IR) letter, Ford provided evidence of 396 customer complaints (including field reports), 825 warranty claims, and 936 engine exchanges. When considering both ODI and manufacturer failure report data, there have been reports representing 1066 unique vehicles within the subject vehicle population. Analysis of the failure report data demonstrates that vehicles equipped with potentially defective intake valves were built within a production “spike period” of May 2021 – October 2021. The beginning of the spike period corresponds to a ramp up in production at the valve supplier manufacturing facility, and the end of the spike period aligns with the implementation of several mid-production process improvements and the decision to change the metal alloy used to produce intake valves from “Silchrome Lite” to “Silchrome 1”. Ford began investigating the subject defect in July 2021, determined the root cause, and took corrective measures for the new production vehicles. Analysis of the failure report data demonstrates that these corrective actions were successful in eliminating the risk of intake valve fracture for subject vehicles produced after October 2021. However, Ford did not take any field action to address vehicles produced during the spike period, and in the several months following the implementation of the production changes, a significant number of field failures continued to occur. It is Ford’s assessment that not all valves produced during the spike period are defective, and that failures associated with the subject defect occur at low time in service. Analysis of the failure report data demonstrates that the vast majority of failures have occurred before 20,000 miles with over half of all reported failures occurring before 5,000 miles. The rate of reported failures related to the subject defect has steadily decreased since November 2021. ODI coordinated with NHTSA’s National Center for Statistics and Analysis (NCSA) to conduct statistical analysis and predict the number of future failures associated with the subject defect. The results of this analysis, and the trends identified through the failure report data are generally consistent with Ford’s assessment that defective intake valves will likely fail at a low time in service and indicate that the majority of subject vehicles equipped with defective valves have already experienced a failure. On August 23, 2024, Ford submitted recall 24V635 for subject vehicles equipped with “Nano” engines and built within the production spike period identified above (total population 90,736 vehicles). The remedy includes an inspection at a Ford/Lincoln dealership where the lifetime engine cycles of the vehicle will be determined. If a vehicle does not meet a threshold for lifetime engine cycles, the dealership will conduct a high RPM engine cycle accumulation procedure, which aims to identify if the vehicle is equipped with defective intake valves. Any vehicle that fails the accumulation procedure will receive an engine replacement under the recall. In addition to recall 24V635, Ford has stated that it will launch customer satisfaction campaign 24N12, which will provide extended warranty coverage to the subject vehicles through the earlier of 10 years or 150,000 miles. In view of the recall action being taken by Ford, ODI is closing this Engineering Analysis. To review the reports cited in the Closing Resume ODI Report Identification Number document, go to NHTSA.gov.