2017 Fccc Xcm

Exterior Lighting:turn Signal

Daimler Trucks North America LLC (DTNA) is recalling certain 2018 Freightliner Custom Chassis XBP, 2017-2020 XBR, 2017-2022 XBS, 2016-2019 XCL, 2016-2023 XCM, 2017-2021 XCP, 2016-2023 XCR, and 2017-2023 XCS recreational vehicle chassis. The rear mounted Power Distribution Module (PDM) may have internal damage, which could result in the rear marker lights, brake lights, or turn signals not functioning.

Consequence: Non-functioning brake lights, rear markers, or turn signals can reduce vehicle visibility to other drivers, increasing the risk of a crash.

Remedy: Dealer will install a secondary fused harness, free of charge. Owner notification letters were mailed March 18, 2022. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL917. This recall is an expansion of NHTSA recalls 20V-404 and 18V-502. Vehicles previously recalled will need to receive the new remedy repair once it is available.

Exterior Lighting:brake Lights

Daimler Trucks North America LLC (DTNA) is recalling certain 2018 Freightliner Custom Chassis XBP, 2017-2020 XBR, 2017-2022 XBS, 2016-2019 XCL, 2016-2023 XCM, 2017-2021 XCP, 2016-2023 XCR, and 2017-2023 XCS recreational vehicle chassis. The rear mounted Power Distribution Module (PDM) may have internal damage, which could result in the rear marker lights, brake lights, or turn signals not functioning.

Consequence: Non-functioning brake lights, rear markers, or turn signals can reduce vehicle visibility to other drivers, increasing the risk of a crash.

Remedy: Dealer will install a secondary fused harness, free of charge. Owner notification letters were mailed March 18, 2022. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL917. This recall is an expansion of NHTSA recalls 20V-404 and 18V-502. Vehicles previously recalled will need to receive the new remedy repair once it is available.

Electrical System

Daimler Trucks North America LLC (DTNA) is recalling certain 2018 Freightliner Custom Chassis XBP, 2017-2020 XBR, 2017-2022 XBS, 2016-2019 XCL, 2016-2023 XCM, 2017-2021 XCP, 2016-2023 XCR, and 2017-2023 XCS recreational vehicle chassis. The rear mounted Power Distribution Module (PDM) may have internal damage, which could result in the rear marker lights, brake lights, or turn signals not functioning.

Consequence: Non-functioning brake lights, rear markers, or turn signals can reduce vehicle visibility to other drivers, increasing the risk of a crash.

Remedy: Dealer will install a secondary fused harness, free of charge. Owner notification letters were mailed March 18, 2022. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL917. This recall is an expansion of NHTSA recalls 20V-404 and 18V-502. Vehicles previously recalled will need to receive the new remedy repair once it is available.

Exterior Lighting:turn Signal

Daimler Trucks North America LLC (DTNA) is recalling certain 2018 Freightliner Custom Chassis Corporation (FCCC) XBP, 2016-2019 XCM, 2017-2020 XCS, 2018-2019 XBR, 2017-2019 XBS, 2016-2019 XCL, 2017-2020 XCP and 2016-2020 XCR recreation vehicle chassis that received the 'inspection-only' remedy from recall 18V-582. The rear mounted Power Distribution Module (PDM) may have been damaged during manufacturing, possibly resulting in the rear marker lights, brake lights, or turn signals not functioning.

Consequence: Non-functioning exterior marker lights can increase the risk of a crash.

Remedy: DTNA will notify owners, and dealers will replace the PDM, free of charge. DTNA issued owners an interim notification September 4, 2020. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-856.

Exterior Lighting:brake Lights

Daimler Trucks North America LLC (DTNA) is recalling certain 2018 Freightliner Custom Chassis Corporation (FCCC) XBP, 2016-2019 XCM, 2017-2020 XCS, 2018-2019 XBR, 2017-2019 XBS, 2016-2019 XCL, 2017-2020 XCP and 2016-2020 XCR recreation vehicle chassis that received the 'inspection-only' remedy from recall 18V-582. The rear mounted Power Distribution Module (PDM) may have been damaged during manufacturing, possibly resulting in the rear marker lights, brake lights, or turn signals not functioning.

Consequence: Non-functioning exterior marker lights can increase the risk of a crash.

Remedy: DTNA will notify owners, and dealers will replace the PDM, free of charge. DTNA issued owners an interim notification September 4, 2020. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-856.

Electrical System

Daimler Trucks North America LLC (DTNA) is recalling certain 2018 Freightliner Custom Chassis Corporation (FCCC) XBP, 2016-2019 XCM, 2017-2020 XCS, 2018-2019 XBR, 2017-2019 XBS, 2016-2019 XCL, 2017-2020 XCP and 2016-2020 XCR recreation vehicle chassis that received the 'inspection-only' remedy from recall 18V-582. The rear mounted Power Distribution Module (PDM) may have been damaged during manufacturing, possibly resulting in the rear marker lights, brake lights, or turn signals not functioning.

Consequence: Non-functioning exterior marker lights can increase the risk of a crash.

Remedy: DTNA will notify owners, and dealers will replace the PDM, free of charge. DTNA issued owners an interim notification September 4, 2020. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-856.

Suspension:front:control Arm

Daimler Trucks North America LLC (DTNA) is recalling certain 2017-2019 Freightliner 114SD, 122SD, 108SD, Cascadia and Business class M2 trucks, Freightliner Custom Chassis XBS, XCL, XCM, MT45, MT55, S2G, S2RV, XCR and XCS custom chassis and Western Star 4700, 4900 and 5700 trucks equipped with Detroit Axle axles. The affected vehicles may have loose steering and tie rod arm bolts.

Consequence: Loose tie rod arm bolts may lead to separation of the tie rod arm, resulting in a loss of vehicle control, increasing the risk of a crash.

Remedy: DTNA has notified owners, and dealers will inspect the steering arm and tie rod arm bolts for to make sure that they are properly tightened, installing new fasteners as necessary, free of charge. The recall began February 9, 2019. Owners may contact Daimler Trucks at 1-800-547-0712. DTNA's number for this recall is FL-802.

Steering:linkages:tie Rod Assembly

Daimler Trucks North America LLC (DTNA) is recalling certain 2017-2019 Freightliner 114SD, 122SD, 108SD, Cascadia and Business class M2 trucks, Freightliner Custom Chassis XBS, XCL, XCM, MT45, MT55, S2G, S2RV, XCR and XCS custom chassis and Western Star 4700, 4900 and 5700 trucks equipped with Detroit Axle axles. The affected vehicles may have loose steering and tie rod arm bolts.

Consequence: Loose tie rod arm bolts may lead to separation of the tie rod arm, resulting in a loss of vehicle control, increasing the risk of a crash.

Remedy: DTNA has notified owners, and dealers will inspect the steering arm and tie rod arm bolts for to make sure that they are properly tightened, installing new fasteners as necessary, free of charge. The recall began February 9, 2019. Owners may contact Daimler Trucks at 1-800-547-0712. DTNA's number for this recall is FL-802.

Steering

Daimler Trucks North America LLC (DTNA) is recalling certain 2017-2019 Freightliner 114SD, 122SD, 108SD, Cascadia and Business class M2 trucks, Freightliner Custom Chassis XBS, XCL, XCM, MT45, MT55, S2G, S2RV, XCR and XCS custom chassis and Western Star 4700, 4900 and 5700 trucks equipped with Detroit Axle axles. The affected vehicles may have loose steering and tie rod arm bolts.

Consequence: Loose tie rod arm bolts may lead to separation of the tie rod arm, resulting in a loss of vehicle control, increasing the risk of a crash.

Remedy: DTNA has notified owners, and dealers will inspect the steering arm and tie rod arm bolts for to make sure that they are properly tightened, installing new fasteners as necessary, free of charge. The recall began February 9, 2019. Owners may contact Daimler Trucks at 1-800-547-0712. DTNA's number for this recall is FL-802.

Exterior Lighting:turn Signal

Daimler Trucks North America LLC (DTNA) is recalling certain 2016-2019 Freightliner Custom Chassis Corporation (FCCC) XBR, XBS, XCR, XCM, XCL, and XCS recreation vehicle chassis. The rear mounted Power Distribution Module (PDM) may have been damaged during manufacturing, possibly resulting in the rear marker lights, brake lights, or turn signals not functioning.

Consequence: Nonfunctioning lights can increase the risk of a crash.

Remedy: The remedy for this recall is still under development. DTNA issued owners an interim notification on October 24, 2018. The recall began May 29, 2019. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL788.

Exterior Lighting:brake Lights

Daimler Trucks North America LLC (DTNA) is recalling certain 2016-2019 Freightliner Custom Chassis Corporation (FCCC) XBR, XBS, XCR, XCM, XCL, and XCS recreation vehicle chassis. The rear mounted Power Distribution Module (PDM) may have been damaged during manufacturing, possibly resulting in the rear marker lights, brake lights, or turn signals not functioning.

Consequence: Nonfunctioning lights can increase the risk of a crash.

Remedy: The remedy for this recall is still under development. DTNA issued owners an interim notification on October 24, 2018. The recall began May 29, 2019. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL788.

Electrical System

Daimler Trucks North America LLC (DTNA) is recalling certain 2016-2019 Freightliner Custom Chassis Corporation (FCCC) XBR, XBS, XCR, XCM, XCL, and XCS recreation vehicle chassis. The rear mounted Power Distribution Module (PDM) may have been damaged during manufacturing, possibly resulting in the rear marker lights, brake lights, or turn signals not functioning.

Consequence: Nonfunctioning lights can increase the risk of a crash.

Remedy: The remedy for this recall is still under development. DTNA issued owners an interim notification on October 24, 2018. The recall began May 29, 2019. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL788.

Exterior Lighting:brake Lights:switch

On April 23, 2018, the National Highway Traffic Safety Administration (“NHTSA”) opened Audit Query (AQ18002) to assess the timeliness and scope of four recalls filed by Daimler Trucks North America, LLC (“DTNA”). NHTSA subsequently expanded AQ18002 to examine the timeliness and scope of three additional DTNA recalls and compliance with early warning reporting and manufacturer communications reporting requirements. NHTSA and DTNA entered into a Consent Order on December 29, 2020, to resolve NHTSA’s assertions that certain recalls within the scope of AQ18002 were untimely, DTNA failed to timely submit certain manufacturer communications to NHTSA, and DTNA failed to submit field reports to NHTSA as required. As part of the Consent Order, DTNA agreed to a total civil penalty of thirty million dollars ($30,000,000), of which ten million dollars ($10,000,000) was paid on January 12, 2021. Also, of that total civil penalty, DTNA agreed to spend five million dollars ($5,000,000) on the specific performance obligations to develop advanced data analytics capabilities to enhance its ability to detect and study emerging safety-related defect trends on its vehicles (“Safety Data Analytics infrastructure”) and an advanced data analytics and reporting platform that integrates data on emerging safety-related defect trends on its vehicles and recall lessons learned (“Safety Communications Platform”). The Consent Order also held fifteen million dollars ($15,000,000) of the civil penalty in abeyance pending DTNA’s satisfactory completion of the requirements of the Consent Order, and its compliance with the Safety Act, and regulations thereunder. NHTSA and DTNA agreed to a two-year term for the Consent Order—with an option for NHTSA to extend the Consent Order for an additional year, if warranted. In the Consent Order, DTNA agreed to numerous performance obligations, including monthly meetings with NHTSA to discuss potential safety issues, recent manufacturer communications, and recall decision-making, among other things; quarterly meetings with NHTSA to discuss DTNA’s progress on the performance obligations under the Consent Order, including the Safety Data Analytics infrastructure and Safety Communications Platform, and any issues related to compliance with the Consent Order, Safety Act, or regulations; development of written procedures and employee training materials to help DTNA comply with its legal obligations to timely identify and report safety defects and noncompliances, submit complete and accurate recall filings, and timely submit manufacturer communications and field reports to NHTSA; and identifying and reporting previously unreported manufacturer communications and field reports. Also, via the Consent Order, DTNA acknowledged that the failure or inability to identify a specific root cause, develop an adequate remedy or repair, or confirm the affected population of vehicles are not bases for delaying filing a recall with NHTSA. On December 22, 2022, NHTSA extended the Consent Order for a term of one year due to concerns about DTNA’s compliance with its recall-related obligations. Specifically, NHTSA expressed concerns about the completeness of DTNA’s recall reports and issues identified with owner notification letters during the term of the Consent Order, as well as the length of time that DTNA took to consider a straightforward noncompliance issue before filing a recall and DTNA’s interactions with NHTSA during the term of the Consent Order. NHTSA addressed these concerns with DTNA during the third year of the Consent Order. The extended term of the Consent Order expired on December 28, 2023. Based on the Consent Order, this investigation, AQ18002, is closed. Closure of this AQ has no bearing on the terms of the Consent Order or DTNA’s ongoing legal obligations, and it does not represent a determination by NHTSA as to DTNA’s performance under the Consent Order.

Steering:hydraulic Power Assist:hose, Piping, And Connections

On April 23, 2018, the National Highway Traffic Safety Administration (“NHTSA”) opened Audit Query (AQ18002) to assess the timeliness and scope of four recalls filed by Daimler Trucks North America, LLC (“DTNA”). NHTSA subsequently expanded AQ18002 to examine the timeliness and scope of three additional DTNA recalls and compliance with early warning reporting and manufacturer communications reporting requirements. NHTSA and DTNA entered into a Consent Order on December 29, 2020, to resolve NHTSA’s assertions that certain recalls within the scope of AQ18002 were untimely, DTNA failed to timely submit certain manufacturer communications to NHTSA, and DTNA failed to submit field reports to NHTSA as required. As part of the Consent Order, DTNA agreed to a total civil penalty of thirty million dollars ($30,000,000), of which ten million dollars ($10,000,000) was paid on January 12, 2021. Also, of that total civil penalty, DTNA agreed to spend five million dollars ($5,000,000) on the specific performance obligations to develop advanced data analytics capabilities to enhance its ability to detect and study emerging safety-related defect trends on its vehicles (“Safety Data Analytics infrastructure”) and an advanced data analytics and reporting platform that integrates data on emerging safety-related defect trends on its vehicles and recall lessons learned (“Safety Communications Platform”). The Consent Order also held fifteen million dollars ($15,000,000) of the civil penalty in abeyance pending DTNA’s satisfactory completion of the requirements of the Consent Order, and its compliance with the Safety Act, and regulations thereunder. NHTSA and DTNA agreed to a two-year term for the Consent Order—with an option for NHTSA to extend the Consent Order for an additional year, if warranted. In the Consent Order, DTNA agreed to numerous performance obligations, including monthly meetings with NHTSA to discuss potential safety issues, recent manufacturer communications, and recall decision-making, among other things; quarterly meetings with NHTSA to discuss DTNA’s progress on the performance obligations under the Consent Order, including the Safety Data Analytics infrastructure and Safety Communications Platform, and any issues related to compliance with the Consent Order, Safety Act, or regulations; development of written procedures and employee training materials to help DTNA comply with its legal obligations to timely identify and report safety defects and noncompliances, submit complete and accurate recall filings, and timely submit manufacturer communications and field reports to NHTSA; and identifying and reporting previously unreported manufacturer communications and field reports. Also, via the Consent Order, DTNA acknowledged that the failure or inability to identify a specific root cause, develop an adequate remedy or repair, or confirm the affected population of vehicles are not bases for delaying filing a recall with NHTSA. On December 22, 2022, NHTSA extended the Consent Order for a term of one year due to concerns about DTNA’s compliance with its recall-related obligations. Specifically, NHTSA expressed concerns about the completeness of DTNA’s recall reports and issues identified with owner notification letters during the term of the Consent Order, as well as the length of time that DTNA took to consider a straightforward noncompliance issue before filing a recall and DTNA’s interactions with NHTSA during the term of the Consent Order. NHTSA addressed these concerns with DTNA during the third year of the Consent Order. The extended term of the Consent Order expired on December 28, 2023. Based on the Consent Order, this investigation, AQ18002, is closed. Closure of this AQ has no bearing on the terms of the Consent Order or DTNA’s ongoing legal obligations, and it does not represent a determination by NHTSA as to DTNA’s performance under the Consent Order.