← New search

2016 Fccc Xbr

Owner reports · Recalls · Investigations

Limited comparison data

There is not enough comparable history to draw a useful model-year comparison.

About this comparison →

How this year compares

Owner complaints by model year

Other model years Selected year
Compare all Xbr years →

Counts vary with age, sales and reporting. They are not failure rates.

What owners reported most

No component reports in this snapshot.

Tap a category to read its complaints. One report may name several components.

When problems were reported

Mileage at the reported incident

Limited mileage data: 0 of 0 reports include usable mileage. There isn’t enough coverage to show a useful chart.

NHTSA’s mileage field refers to the reported incident, not necessarily the filing date. This shows report counts, not the likelihood of a failure.

NHTSA owner reports · September 18, 2026 snapshot.

0 crash reports0 fire reports0 injury reports

What owners actually said

0 reports

No matching complaints in this snapshot.

Official recalls

5

18V582000 · Electrical System; Exterior Lighting:brake Lights; Exterior Lighting:turn Signal

Aug 31, 2018

Daimler Trucks North America LLC (DTNA) is recalling certain 2016-2019 Freightliner Custom Chassis Corporation (FCCC) XBR, XBS, XCR, XCM, XCL, and XCS recreation vehicle chassis. The rear mounted Power Distribution Module (PDM) may have been damaged during manufacturing, possibly resulting in the rear marker lights, brake lights, or turn signals not functioning.

Consequence & remedy

Consequence: Nonfunctioning lights can increase the risk of a crash.

Remedy: The remedy for this recall is still under development. DTNA issued owners an interim notification on October 24, 2018. The recall began May 29, 2019. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL788.

Additional source detail variants (3)

Exterior Lighting:turn Signal

Daimler Trucks North America LLC (DTNA) is recalling certain 2016-2019 Freightliner Custom Chassis Corporation (FCCC) XBR, XBS, XCR, XCM, XCL, and XCS recreation vehicle chassis. The rear mounted Power Distribution Module (PDM) may have been damaged during manufacturing, possibly resulting in the rear marker lights, brake lights, or turn signals not functioning.

Consequence: Nonfunctioning lights can increase the risk of a crash.

Remedy: The remedy for this recall is still under development. DTNA issued owners an interim notification on October 24, 2018. The recall began May 29, 2019. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL788.

Exterior Lighting:brake Lights

Daimler Trucks North America LLC (DTNA) is recalling certain 2016-2019 Freightliner Custom Chassis Corporation (FCCC) XBR, XBS, XCR, XCM, XCL, and XCS recreation vehicle chassis. The rear mounted Power Distribution Module (PDM) may have been damaged during manufacturing, possibly resulting in the rear marker lights, brake lights, or turn signals not functioning.

Consequence: Nonfunctioning lights can increase the risk of a crash.

Remedy: The remedy for this recall is still under development. DTNA issued owners an interim notification on October 24, 2018. The recall began May 29, 2019. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL788.

Electrical System

Daimler Trucks North America LLC (DTNA) is recalling certain 2016-2019 Freightliner Custom Chassis Corporation (FCCC) XBR, XBS, XCR, XCM, XCL, and XCS recreation vehicle chassis. The rear mounted Power Distribution Module (PDM) may have been damaged during manufacturing, possibly resulting in the rear marker lights, brake lights, or turn signals not functioning.

Consequence: Nonfunctioning lights can increase the risk of a crash.

Remedy: The remedy for this recall is still under development. DTNA issued owners an interim notification on October 24, 2018. The recall began May 29, 2019. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL788.

18V163000 · Steering:hydraulic Power Assist:hose, Piping, And Connections

Mar 12, 2018

Daimler Trucks North America, LLC (DTNA) is recalling certain model year 2011-2017 Freightliner Custom Chassis Corporation (FCCC) XBR, XCL, XCM, and XCR recreational vehicle chassis, equipped with Cummins ISL engines. The power steering hose on the affected vehicles may be routed incorrectly, and, as a result, the hose may rub against the power stud on the starter motor, possibly causing electrical arcing and a power steering fluid leak.

Consequence & remedy

Consequence: Electrical arcing in the presence of leaking power steering fluid can increase the risk of a fire.

Remedy: DTNA will notify owners, and dealers will reroute the power steering hose to provide proper clearance, free of charge. The recall is expected to begin on May 2018. Owners may contact DTNA customer service at 1-800-547-0712 . DTNA's number for this recall is FL-762. Note: This recall is an expansion of 16V-809.

16V809000 · Steering:hydraulic Power Assist:hose, Piping, And Connections

Nov 7, 2016

Daimler Trucks North America, LLC (DTNA) is recalling certain model year 2016-2017 FCCC XBR, XCL, XCM, and XCR recreational vehicle chassis manufactured January 1, 2016, to October 12, 2016, equipped with Cummins ISL engines. The power steering hose on the affected vehicles may be routed incorrectly, and, as a result, the hose may rub against the power stud on the starter motor, possibly causing electrical arcing and a power steering fluid leak.

Consequence & remedy

Consequence: Electrical arcing in the presence of leaking power steering fluid can increase the risk of a fire.

Remedy: DTNA will notify owners, and dealers will reroute the power steering hose to provide proper clearance, free of charge. The recall began on December 27, 2016. Owners may contact DTNA customer service at 1-800-547-0712 . DTNA's number for this recall is FL-727.

16V366000 · Steering

May 26, 2016

Daimler Trucks North America LLC (DTNA) is recalling certain model year 2015-2016 FCCC XBP, XBR, XCM, XCR, XCL, and XCP trucks manufactured May 1, 2014, to June 16, 2015, equipped with certain ZF RL77 / 80EM independent front steering axles equipped with Bosch 8018 steering boxes. The boxes were manufactured using incorrect internal spacers that can cause premature wear in the connection between the steering wheel and the front axle.

Consequence & remedy

Consequence: The steering wheel's connection to the front axle could fail resulting in a sudden loss of steering ability, increasing the risk of a crash.

Remedy: DTNA will notify owners, and dealers will inspect and replace the steering box if necessary, free of charge. Owners are urged not to drive their vehicles until they have been inspected. The recall began on May 31, 2016. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-712.

16V204000 · Service Brakes, Electric

Apr 11, 2016

Daimler Trucks North America LLC (DTNA) is recalling certain model year 2013-2016 FCC XCS, XCM, XCR, XCL, XCP, XBS, XBR, and XBP trucks manufactured from January 7, 2013, through June 1, 2015. On certain motorhome chassis built with a heavier, adjustable, offset, foot pedal, the brake activation signal to certain towed devices may not deactivate when the motorhome service brakes are released.

Consequence & remedy

Consequence: If the brake activation signal to a towed device remains active when the motorhome chassis service brakes are released, the brakes on a towed device may remain engaged depending on brake configuration of the trailer. As a result, the brakes would drag and possibly overheat potentially resulting in a fire. Additionally, following drivers may be confused by the motorhome's actions, increasing the risk of a crash.

Remedy: DTNA will notify owners, and dealers will modify the affected brake assemblies, free of charge. The recall began on June 6, 2016. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's recall number for this campaign is FL-704.

Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗

NHTSA investigations

1

AQ18002 · Daimler Trucks North America Recalls

Opened Apr 23, 2018 · Closed Jul 11, 2024

Status: closed (inferred from source dates) · Exterior Lighting:brake Lights:switch; Steering:hydraulic Power Assist:hose, Piping, And Connections

On April 23, 2018, the National Highway Traffic Safety Administration (“NHTSA”) opened Audit Query (AQ18002) to assess the timeliness and scope of four recalls filed by Daimler Trucks North America, LLC (“DTNA”). NHTSA subsequently expanded AQ18002 to examine the timeliness and scope of three additional DTNA recalls and compliance with early warning reporting and manufacturer communications reporting requirements. NHTSA and DTNA entered into a Consent Order on December 29, 2020, to resolve NHTSA’s assertions that certain recalls within the scope of AQ18002 were untimely, DTNA failed to timely submit certain manufacturer communications to NHTSA, and DTNA failed to submit field reports to NHTSA as required. As part of the Consent Order, DTNA agreed to a total civil penalty of thirty million dollars ($30,000,000), of which ten million dollars ($10,000,000) was paid on January 12, 2021. Also, of that total civil penalty, DTNA agreed to spend five million dollars ($5,000,000) on the specific performance obligations to develop advanced data analytics capabilities to enhance its ability to detect and study emerging safety-related defect trends on its vehicles (“Safety Data Analytics infrastructure”) and an advanced data analytics and reporting platform that integrates data on emerging safety-related defect trends on its vehicles and recall lessons learned (“Safety Communications Platform”). The Consent Order also held fifteen million dollars ($15,000,000) of the civil penalty in abeyance pending DTNA’s satisfactory completion of the requirements of the Consent Order, and its compliance with the Safety Act, and regulations thereunder. NHTSA and DTNA agreed to a two-year term for the Consent Order—with an option for NHTSA to extend the Consent Order for an additional year, if warranted. In the Consent Order, DTNA agreed to numerous performance obligations, including monthly meetings with NHTSA to discuss potential safety issues, recent manufacturer communications, and recall decision-making, among other things; quarterly meetings with NHTSA to discuss DTNA’s progress on the performance obligations under the Consent Order, including the Safety Data Analytics infrastructure and Safety Communications Platform, and any issues related to compliance with the Consent Order, Safety Act, or regulations; development of written procedures and employee training materials to help DTNA comply with its legal obligations to timely identify and report safety defects and noncompliances, submit complete and accurate recall filings, and timely submit manufacturer communications and field reports to NHTSA; and identifying and reporting previously unreported manufacturer communications and field reports. Also, via the Consent Order, DTNA acknowledged that the failure or inability to identify a specific root cause, develop an adequate remedy or repair, or confirm the affected population of vehicles are not bases for delaying filing a recall with NHTSA. On December 22, 2022, NHTSA extended the Consent Order for a term of one year due to concerns about DTNA’s compliance with its recall-related obligations. Specifically, NHTSA expressed concerns about the completeness of DTNA’s recall reports and issues identified with owner notification letters during the term of the Consent Order, as well as the length of time that DTNA took to consider a straightforward noncompliance issue before filing a recall and DTNA’s interactions with NHTSA during the term of the Consent Order. NHTSA addressed these concerns with DTNA during the third year of the Consent Order. The extended term of the Consent Order expired on December 28, 2023. Based on the Consent Order, this investigation, AQ18002, is closed. Closure of this AQ has no bearing on the terms of the Consent Order or DTNA’s ongoing legal obligations, and it does not represent a determination by NHTSA as to DTNA’s performance under the Consent Order.

Additional source detail variants (2)

Exterior Lighting:brake Lights:switch

On April 23, 2018, the National Highway Traffic Safety Administration (“NHTSA”) opened Audit Query (AQ18002) to assess the timeliness and scope of four recalls filed by Daimler Trucks North America, LLC (“DTNA”). NHTSA subsequently expanded AQ18002 to examine the timeliness and scope of three additional DTNA recalls and compliance with early warning reporting and manufacturer communications reporting requirements. NHTSA and DTNA entered into a Consent Order on December 29, 2020, to resolve NHTSA’s assertions that certain recalls within the scope of AQ18002 were untimely, DTNA failed to timely submit certain manufacturer communications to NHTSA, and DTNA failed to submit field reports to NHTSA as required. As part of the Consent Order, DTNA agreed to a total civil penalty of thirty million dollars ($30,000,000), of which ten million dollars ($10,000,000) was paid on January 12, 2021. Also, of that total civil penalty, DTNA agreed to spend five million dollars ($5,000,000) on the specific performance obligations to develop advanced data analytics capabilities to enhance its ability to detect and study emerging safety-related defect trends on its vehicles (“Safety Data Analytics infrastructure”) and an advanced data analytics and reporting platform that integrates data on emerging safety-related defect trends on its vehicles and recall lessons learned (“Safety Communications Platform”). The Consent Order also held fifteen million dollars ($15,000,000) of the civil penalty in abeyance pending DTNA’s satisfactory completion of the requirements of the Consent Order, and its compliance with the Safety Act, and regulations thereunder. NHTSA and DTNA agreed to a two-year term for the Consent Order—with an option for NHTSA to extend the Consent Order for an additional year, if warranted. In the Consent Order, DTNA agreed to numerous performance obligations, including monthly meetings with NHTSA to discuss potential safety issues, recent manufacturer communications, and recall decision-making, among other things; quarterly meetings with NHTSA to discuss DTNA’s progress on the performance obligations under the Consent Order, including the Safety Data Analytics infrastructure and Safety Communications Platform, and any issues related to compliance with the Consent Order, Safety Act, or regulations; development of written procedures and employee training materials to help DTNA comply with its legal obligations to timely identify and report safety defects and noncompliances, submit complete and accurate recall filings, and timely submit manufacturer communications and field reports to NHTSA; and identifying and reporting previously unreported manufacturer communications and field reports. Also, via the Consent Order, DTNA acknowledged that the failure or inability to identify a specific root cause, develop an adequate remedy or repair, or confirm the affected population of vehicles are not bases for delaying filing a recall with NHTSA. On December 22, 2022, NHTSA extended the Consent Order for a term of one year due to concerns about DTNA’s compliance with its recall-related obligations. Specifically, NHTSA expressed concerns about the completeness of DTNA’s recall reports and issues identified with owner notification letters during the term of the Consent Order, as well as the length of time that DTNA took to consider a straightforward noncompliance issue before filing a recall and DTNA’s interactions with NHTSA during the term of the Consent Order. NHTSA addressed these concerns with DTNA during the third year of the Consent Order. The extended term of the Consent Order expired on December 28, 2023. Based on the Consent Order, this investigation, AQ18002, is closed. Closure of this AQ has no bearing on the terms of the Consent Order or DTNA’s ongoing legal obligations, and it does not represent a determination by NHTSA as to DTNA’s performance under the Consent Order.

Steering:hydraulic Power Assist:hose, Piping, And Connections

On April 23, 2018, the National Highway Traffic Safety Administration (“NHTSA”) opened Audit Query (AQ18002) to assess the timeliness and scope of four recalls filed by Daimler Trucks North America, LLC (“DTNA”). NHTSA subsequently expanded AQ18002 to examine the timeliness and scope of three additional DTNA recalls and compliance with early warning reporting and manufacturer communications reporting requirements. NHTSA and DTNA entered into a Consent Order on December 29, 2020, to resolve NHTSA’s assertions that certain recalls within the scope of AQ18002 were untimely, DTNA failed to timely submit certain manufacturer communications to NHTSA, and DTNA failed to submit field reports to NHTSA as required. As part of the Consent Order, DTNA agreed to a total civil penalty of thirty million dollars ($30,000,000), of which ten million dollars ($10,000,000) was paid on January 12, 2021. Also, of that total civil penalty, DTNA agreed to spend five million dollars ($5,000,000) on the specific performance obligations to develop advanced data analytics capabilities to enhance its ability to detect and study emerging safety-related defect trends on its vehicles (“Safety Data Analytics infrastructure”) and an advanced data analytics and reporting platform that integrates data on emerging safety-related defect trends on its vehicles and recall lessons learned (“Safety Communications Platform”). The Consent Order also held fifteen million dollars ($15,000,000) of the civil penalty in abeyance pending DTNA’s satisfactory completion of the requirements of the Consent Order, and its compliance with the Safety Act, and regulations thereunder. NHTSA and DTNA agreed to a two-year term for the Consent Order—with an option for NHTSA to extend the Consent Order for an additional year, if warranted. In the Consent Order, DTNA agreed to numerous performance obligations, including monthly meetings with NHTSA to discuss potential safety issues, recent manufacturer communications, and recall decision-making, among other things; quarterly meetings with NHTSA to discuss DTNA’s progress on the performance obligations under the Consent Order, including the Safety Data Analytics infrastructure and Safety Communications Platform, and any issues related to compliance with the Consent Order, Safety Act, or regulations; development of written procedures and employee training materials to help DTNA comply with its legal obligations to timely identify and report safety defects and noncompliances, submit complete and accurate recall filings, and timely submit manufacturer communications and field reports to NHTSA; and identifying and reporting previously unreported manufacturer communications and field reports. Also, via the Consent Order, DTNA acknowledged that the failure or inability to identify a specific root cause, develop an adequate remedy or repair, or confirm the affected population of vehicles are not bases for delaying filing a recall with NHTSA. On December 22, 2022, NHTSA extended the Consent Order for a term of one year due to concerns about DTNA’s compliance with its recall-related obligations. Specifically, NHTSA expressed concerns about the completeness of DTNA’s recall reports and issues identified with owner notification letters during the term of the Consent Order, as well as the length of time that DTNA took to consider a straightforward noncompliance issue before filing a recall and DTNA’s interactions with NHTSA during the term of the Consent Order. NHTSA addressed these concerns with DTNA during the third year of the Consent Order. The extended term of the Consent Order expired on December 28, 2023. Based on the Consent Order, this investigation, AQ18002, is closed. Closure of this AQ has no bearing on the terms of the Consent Order or DTNA’s ongoing legal obligations, and it does not represent a determination by NHTSA as to DTNA’s performance under the Consent Order.