Counts vary with age, sales and reporting. They are not failure rates.
What owners reported most
No component reports in this snapshot.
Tap a category to read its complaints. One report may name several components.
When problems were reported
Mileage at the reported incident
Limited mileage data: 0 of 0 reports include usable mileage. There isn’t enough coverage to show a useful chart.
NHTSA’s mileage field refers to the reported incident, not necessarily the filing date. This shows report counts, not the likelihood of a failure.
NHTSA owner reports · September 18, 2026 snapshot.
0 crash reports0 fire reports0 injury reports
What owners actually said
0 reports
No matching complaints in this snapshot.
Official recalls
0
No recalls in this snapshot.
Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗
NHTSA investigations
2
EA88006 · Steering Output Shaft
Opened Nov 3, 1987 · Closed Apr 1, 1988
Status: closed (inferred from source dates) · Steering
SUMMARY OF INFORMATION FROM MANUFACTURER:BOTH CHRYSLER AND MITSUBISHIINDEPENDENTLY CONCLUDED THAT THE FAILURES WERE DUE TO SEVERE IMPACT LOADINGTRANSMITTED TO THE SHAFT BY THE STEERING LINKAGE SYSTEM -- IN OTHER WORDSSHAFT FAILURE IS THE RESULT, NOT THE CAUSE, OF THE ALLEGED COLLISIONCIRCUMSTANCES.MITSUBISHI (VEHICLE PRODUCER) DID STRENGTHEN THE SHAFTDURING THE 1984 MODEL YEAR BY INCREASING THE SPLINE AND BEARING JOURNALDIAMETERS.ANALYSIS:FAILING COMPONENT IS THE STEERING BOX CROSS SHAFT (OUTPUT SHAFT)WHICH BREAKS BETWEEN THE BOTTOM BEARING IN THE STEERING BOX AND THE PITMANARM.KNOWN FAILURES INVOLVE 4 WHEEL DRIVE UNITS WHICH ARE EQUIPPED WITHPOWER STEERING.CROSS SHAFT AND PITMAN ARM SALES ARE CONSIDERABLY HIGHERON THE 4 WD UNITS THAN THE 2 WD UNITS.CHRYSLER REPORTS THE CROSS SHAFTDIAMETER WAS INCREASED IN APRIL, 1984, FOR INCREASED SHAFT STRENGTH TOIMPROVE ITS CAPABILITY TO WITHSTAND SEVERE IMPACT LOADS.PROPOSED ACTION:IR'S TO CHRYSLER AND MITSUBISHI SENT 11/16 - 17/87.AWAITING RESPONSES.===
PE87037 · Pitman Arm Failure
Opened Jul 1, 1987 · Closed Nov 3, 1987
Status: closed (inferred from source dates) · Steering
SUMMARY OF INFORMATION FROM MANUFACTURER:BOTH CHRYSLER AND MITSUBISHIINDEPENDENTLY CONCLUDED THAT THE FAILURES WERE DUE TO SEVERE IMPACT LOADINGTRANSMITTED TO THE SHAFT BY THE STEERING LINKAGE SYSTEM -- IN OTHER WORDSSHAFT FAILURE IS THE RESULT, NOT THE CAUSE, OF THE ALLEGED COLLISIONCIRCUMSTANCES.MITSUBISHI DID STRENGTHEN THE SHAFT DURING THE 1984 MODELYEAR BY INCREASING THE SPLINE AND BEARING JOURNAL DIAMETERS.ANALYSIS:FAILING COMPONENT IS THE STEERING BOX CROSS SHAFT (OUTPUT SHAFT)WHICH BREAKS BETWEEN THE BOTTOM BEARING IN THE STEERING BOX AND THE PITMANARM.KNOWN FAILURES INVOLVE 4 WHEEL DRIVE UNITS EQUIPPED WITH POWERSTEERING.CROSS SHAFT AND PITMAN ARM SALES ARE CONSIDERABLY HIGHER ON 4WHEEL DRIVE UNITS THAN 2 WHEEL DRIVE UNITS.CHRYSLER REPORTS THE CROSSSHAFT DIAMETER WAS INCREASED IN APRIL, 1984, FOR INCREASED SHAFT STRENGTHTO IMPROVE ITS CAPABILITY TO WITHSTAND SEVERE IMPACT LOADS.PROPOSED ACTION:UPGRADE THIS PE TO AN EA.CONTACT MITSUBISHI FORINFORMATION ON COMPARABLE VEHICLES.===
1982 Dodge RAM 50 Problems, Complaints & Recalls | Skip That Year
Illustration