NHTSA owner reports · September 18, 2026 snapshot.
Power Train complaints
28 reportsClear category filterMileage unknown · Apr 30, 2026
EngineFuel/propulsion SystemPower Train
Driving my 2012 dodge ram 3500, just as I was crossing one of the busiest intersections in my town my truck lost all power and dropped from 35mph to 5 mph. Barley made it acrossed and pulled over. As soon as I pulled over the engine light comes on, checked code, and U010C lost coms with turbo actuator comes up. Turned truck off …
Read full complaint
Driving my 2012 dodge ram 3500, just as I was crossing one of the busiest intersections in my town my truck lost all power and dropped from 35mph to 5 mph. Barley made it acrossed and pulled over. As soon as I pulled over the engine light comes on, checked code, and U010C lost coms with turbo actuator comes up. Turned truck off and rest code and everything back to normal. About a week later it happened again, luckily not as busy of a spot. Called dealer and soonest appointment was in April. Meanwhile I look up code and see hundreds of post for same issue, bad actuator replace. 28 years as a diesel mechanic for the military, so I found the part online and ordered. Replaced the actuator, drove about 50 miles, light comes back on. Finally get my appointment with dealer and they say my turbo is bad, they want $8k to fix. I ordered the turbo and replaced it myself along with another actuator, test drove. Light still comes on but have not lost power yet?? Dealer is not helping. This is a major issue that is all over the internet! The truck just goes to limp and your in the middle of traffic. If this has not caused an accident it’s only a matter of time before it does. The dealer ship just wants to replace big parts for lots of money. I’m already $2500 into this and still having an issue
NHTSA ODI #11734962
Mileage unknown · Feb 20, 2025
Electrical SystemEnginePower Train
The wireless ignition module loses connection internally and the truck will lose power while driving. It usually happens when hitting a small bump and the key in the ignition moves. Truck loses electrical power which shuts the engine off which means loss of power steering and brakes.
NHTSA ODI #11644035
215,000 miles · Feb 14, 2025
Power TrainSuspension
The contact owns a 2012 Ram 3500. The contact stated that while driving uphill at 55 MPH, the contact became aware that the vehicle was not exceeding 55 MPH. The contact stated that the check engine warning light was illuminated. The contact continued driving to the destination. The vehicle was parked; however, upon inspection, …
Read full complaint
The contact owns a 2012 Ram 3500. The contact stated that while driving uphill at 55 MPH, the contact became aware that the vehicle was not exceeding 55 MPH. The contact stated that the check engine warning light was illuminated. The contact continued driving to the destination. The vehicle was parked; however, upon inspection, the contact became aware that there were damages on top of the front driver’s side ball joint, the rear driver’s side axle leaf spring shackle, and the driver’s side overload spring. Additionally, there were metal fragments found in the engine oil, and a diagnostic scan retrieved DTC: P0087, P0471, U029D. The vehicle was taken to a local dealer where it was inspected; however, the vehicle was not diagnosed or repaired. The manufacturer was not notified of the failure. The approximate failure mileage was 215,000.
NHTSA ODI #11642736
Mileage unknown · May 21, 2024
Power Train
Valve body issue
NHTSA ODI #11589949
5,000 miles · Jan 14, 2021
Electrical SystemPower TrainService Brakes
THE INTEGRATED BRAKE CONTROLLER IS INTERMITTENT AT BEST. I PURCHASED A TRAILER AND IT HOOKED UP FINE. WORKED FINE TOWING UNTIL I DISCONNECTED THE TRAILER AND SEVEN PIN CONNECTOR. NOW THE CONTROLLER TELLS ME THERE IS NO TRAILER ON THE CONTROLLER AND THE DASH ALERTS. UPON PULLING THE TRAILER AGAIN THE CONTROLLER TELLS ME I'M NOT T…
Read full complaint
THE INTEGRATED BRAKE CONTROLLER IS INTERMITTENT AT BEST. I PURCHASED A TRAILER AND IT HOOKED UP FINE. WORKED FINE TOWING UNTIL I DISCONNECTED THE TRAILER AND SEVEN PIN CONNECTOR. NOW THE CONTROLLER TELLS ME THERE IS NO TRAILER ON THE CONTROLLER AND THE DASH ALERTS. UPON PULLING THE TRAILER AGAIN THE CONTROLLER TELLS ME I'M NOT TOWING WHEN I AM. ??
NHTSA ODI #11388248
73,000 miles · Sep 30, 2020
EnginePower Train
SOMETHING IN TRANSMISSION (68RFE) FAILED AND DUMPS FLUID OUT OF THE TRANSMISSION DIP STICK TUBE ONTO THE TURBO WHICH COULD CAUSE A FIRE. THIS HAPPENED WHILE DRIVING AND SMOKE STARTED COMING OUT OF ENGINE COMPARTMENT. I WAS DRIVING ON A CITY STREET IN THE TOWN I LIVED.
NHTSA ODI #11361986
161,000 miles · May 8, 2020
Electrical SystemPower TrainSteering
WHILE DRIVING DOWN THE HIGHWAY/ROADS EVERY SO OFTEN THE TRUCK WOULD SHUT DOWN COMPLETELY. BEEN DOING THIS A COUPLE OF TIMES. LUCKILY I NEVER GOT INTO A WRECK BECAUSE OF THIS ISSUE. NOW THE TRUCK WON?T START AND IT HAPPENED AT HOME. AFTER TROUBLESHOOTING THE PROBLEM I HAVE FOUND THE WIRELESS IGNITION NODE TO BE BAD. AFTER A LITT…
Read full complaint
WHILE DRIVING DOWN THE HIGHWAY/ROADS EVERY SO OFTEN THE TRUCK WOULD SHUT DOWN COMPLETELY. BEEN DOING THIS A COUPLE OF TIMES. LUCKILY I NEVER GOT INTO A WRECK BECAUSE OF THIS ISSUE. NOW THE TRUCK WON?T START AND IT HAPPENED AT HOME. AFTER TROUBLESHOOTING THE PROBLEM I HAVE FOUND THE WIRELESS IGNITION NODE TO BE BAD. AFTER A LITTLE RESEARCH ON THIS I CAME UP ON A RECALL FOR THE SAME PROBLEM AND THE SAME IGNITION SYSTEM ON OTHER DODGE?S AND WAS WONDERING WHY THE DODGE RAM WAS LEFT OUT. RECALL NUMBER R03/NHTSA 14V-373. *TR
NHTSA ODI #11323833
141,000 miles · Dec 30, 2019
Electrical SystemPower Train
WHILE DRIVING CHECK ENGINE LIGHT CAME ON, TOOK IT TO THE MECHANIC SHOWS MULTIPLE FAULT CODES. MECHANIC AND DEALER CANNOT FIND CAUSE OF CODES. REPLACED EVERY SENSOR AND COMPUTER 2 TIMES STILL HAS THE SAME CODES.
NHTSA ODI #11292153
94,000 miles · Oct 24, 2019
Power Train
TL* THE CONTACT OWNS A 2012 RAM 3500. WHILE DRIVING AT AN UNKNOWN SPEED, AN ABNORMAL NOISE OCCURRED, THE VEHICLE LOST POWER, AND BECAME UNCONTROLLABLE. THE CONTACT WAS ABLE TO COAST THE VEHICLE TO THE SIDE OF THE ROAD AND NOTICED THAT THE TRANSFER CASE SHATTERED AND WAS ON THE GROUND. ALSO, THE FRONT AND REAR DRIVESHAFTS WERE DE…
Read full complaint
TL* THE CONTACT OWNS A 2012 RAM 3500. WHILE DRIVING AT AN UNKNOWN SPEED, AN ABNORMAL NOISE OCCURRED, THE VEHICLE LOST POWER, AND BECAME UNCONTROLLABLE. THE CONTACT WAS ABLE TO COAST THE VEHICLE TO THE SIDE OF THE ROAD AND NOTICED THAT THE TRANSFER CASE SHATTERED AND WAS ON THE GROUND. ALSO, THE FRONT AND REAR DRIVESHAFTS WERE DETACHED. THE VEHICLE WAS TOWED TO A TRANSMISSION SHOP WHERE IT WAS DIAGNOSED THAT THE TRANSFER CASE NEEDED TO BE REPLACED. THE VEHICLE WAS IN THE PROCESS OF BEING REPAIRED. THE DEALER AND MANUFACTURER WERE NOT MADE AWARE OF THE FAILURE. THE FAILURE MILEAGE WAS APPROXIMATELY 94,000.
NHTSA ODI #11270677
54,000 miles · Feb 21, 2019
Power Train
DIFFERENTIAL OUT, 54,000 MILES, EITHER FAULTY WORKMANSHIP OR FAULTY PARTS.
NHTSA ODI #11181617
Official recalls
8May 27, 2021
Chrysler (FCA US, LLC) is recalling certain 2012-2021 RAM 3500, 3500 Cab Chassis, 4500 Cab Chassis, and 5500 Cab Chassis vehicles. Incorrect information in the Service and Owner's Manuals may cause the flanged lug nuts to be over-tightened, which could result in a broken wheel stud and possible wheel separation.
Consequence & remedy
Consequence: Wheel separation can cause a vehicle crash.
Remedy: Dealers will update the torque specification in the owner's manual and other published service documents. Dealers will also inspect the vehicle's wheel studs, replacing them if necessary, free of charge. Owner notification letters were mailed on November 30, 2021. Campaign Y36 owner notification letters were mailed on November 30, 2021. Campaign Y26 owner notification letters were mailed on December 1, 2021. Owners may contact FCA US customer service at 1-800-853-1403. FCA US's numbers for this recall are Y26 and Y36.
Dec 21, 2017
Chrysler (FCA US LLC) is recalling various Dodge, Chrysler, and RAM vehicles equipped with Kidde Plastic-Handle or Push Button 'Pindicator' Fire Extinguishers. A list of the affected trailer models is available at: https://static.nhtsa.gov/odi/rcl/2017/RMISC-17V824-0103.pdf. These extinguishers may become clogged, preventing the extinguisher from discharging as expected or requiring excessive force to activate the extinguisher. Additionally, in certain models, the nozzle may detach from the valve assembly with enough force that it could cause injury and also render the product inoperable. For a full list of the affected fire extinguisher models visit: https://static.nhtsa.gov/odi/rcl/2017/RMISC-17E062-5427.pdf
Consequence & remedy
Consequence: If the fire extinguisher does not function properly, it can increase the risk of injury in the event of a fire.
Remedy: Chrysler will notify owners instructing them to contact Kidde for a replacement fire extinguisher, free of charge. The recall began February 14, 2018. Owners may contact Chrysler customer service at 1-800-853-1403 or Kidde customer service service toll-free at 1-855-262-3540, or online at www.kidde.com and click on "Product Safety Recall" for more information. Chrysler's number for this recall is T82.
Dec 20, 2017
Chrysler (FCA US LLC) is recalling certain 2016-2017 Ram 3500 Cab Chassis with a Gross Vehicle Weight Rating (GVWR) of less than 10,000 lbs, 2011-2017 Ram 3500, 4500 and 5500 Cab Chassis vehicles, 2009-2017 Ram 1500 and 2010-2017 Ram 2500 and 3500 pickup trucks, all equipped with a column shifter. Pushing the brake pedal for prolonged periods when the vehicle is running and in PARK may cause the Brake Transmission Shift Interlock (BTSI) pin to stick in the open position. With the pin in the open position, the transmission can be shifted out of PARK into any gear without pushing the brake pedal or having the key in the ignition.
Consequence & remedy
Consequence: Being able to shift the transmission without pushing the brake pedal and/or without a key in the ignition can increase the risk of an unintended vehicle rollaway that may result in personal injury or a crash.
Remedy: Chrysler will notify owners, and dealers will update the vehicle software, inspect the BTSI, and, as necessary, replace it, free of charge. The recall began February 26, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is T79.
Oct 13, 2016
Chrysler (FCA US LLC) is recalling certain model year 2011-2014 Dodge Charger Police vehicles, 2007-2013 RAM 3500 Cab Chassis, 2008-2013 RAM 4500 and 5500 Cab Chassis, and 2013 RAM 2500 and 3500 vehicles. The affected vehicles have a 220 amp alternator that may suddenly fail.
Consequence & remedy
Consequence: If the alternator fails, the vehicle may stall without warning, increasing the risk of a crash. There is also the possibility that the alternator may short circuit, increasing the risk of a fire.
Remedy: Chrysler will notify owners, and dealers will replace the alternator with a revised alternator, free of charge. The recall began on December 23, 2016. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is S68.
Jul 22, 2015
Chrysler (FCA US LLC) is recalling certain model year 2012-2014 Ram 1500, 2500, 3500, 4500, and 5500 trucks manufactured January 18, 2011, to October 7, 2014, and equipped with the Electronic Vehicle Information Center option. The affected vehicles have a steering wheel wiring harness that may rub against the driver air bag module retainer spring.
Consequence & remedy
Consequence: This abrasion may result in an electrical short that could cause driver's frontal air bag to unexpectedly deploy. Inadvertent deployment of the air bag may increase the risk of injury and the possibility of a vehicle crash.
Remedy: Chrysler will notify owners, and dealers will inspect, repair as necessary, and secure the steering wheel wiring harness. Additionally, protective caps will be added to the air bag retainer spring ends. These repairs will be done free of charge. The recall began on September 18, 2015. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is R36.
Oct 8, 2014
Chrysler Group LLC (Chrysler) is recalling certain model year 2010-2014 Ram 2500, 3500, 4500, and 5500 trucks manufactured March 27, 2009, to September 5, 2013. In the affected vehicles, the electrical connectors of the diesel fuel heater may overheat.
Consequence & remedy
Consequence: If the connectors overheat, the fuel heater may leak fuel, increasing the risk of a fire.
Remedy: Chrysler will notify owners, and dealers will replace the harness side connector with a silver plated beryllium copper terminal service kit, and inspect the fuel heater for leaks, replacing it as necessary, free of charge. Chrysler issued interim notification to owners on December 8, 2014. The recall began on April 27, 2015. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is P65.
Additional source detail variants (2)
Fuel System, Diesel
Chrysler Group LLC (Chrysler) is recalling certain model year 2010-2014 Ram 2500, 3500, 4500, and 5500 trucks manufactured March 27, 2009, to September 5, 2013. In the affected vehicles, the electrical connectors of the diesel fuel heater may overheat.
Consequence: If the connectors overheat, the fuel heater may leak fuel, increasing the risk of a fire.
Remedy: Chrysler will notify owners, and dealers will replace the harness side connector with a silver plated beryllium copper terminal service kit, and inspect the fuel heater for leaks, replacing it as necessary, free of charge. Chrysler issued interim notification to owners on December 8, 2014. The recall began on April 27, 2015. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is P65.
Engine And Engine Cooling:engine:diesel
Chrysler Group LLC (Chrysler) is recalling certain model year 2010-2014 Ram 2500, 3500, 4500, and 5500 trucks manufactured March 27, 2009, to September 5, 2013. In the affected vehicles, the electrical connectors of the diesel fuel heater may overheat.
Consequence: If the connectors overheat, the fuel heater may leak fuel, increasing the risk of a fire.
Remedy: Chrysler will notify owners, and dealers will replace the harness side connector with a silver plated beryllium copper terminal service kit, and inspect the fuel heater for leaks, replacing it as necessary, free of charge. Chrysler issued interim notification to owners on December 8, 2014. The recall began on April 27, 2015. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is P65.
Nov 6, 2013
Chrysler Group LLC (Chrysler) is recalling certain model year 2008-2012 RAM 2500 4X4 and 3500 4X4 trucks, 2008-2012 Dodge RAM 3500 4x2 Cab Chassis, and model year 2008 Dodge RAM 1500 Mega Cab 4x4. The left tie rod assembly may break.
Consequence & remedy
Consequence: A failure of the tie rod assembly may result in a loss of steering control, increasing the risk of a crash.
Remedy: Chrysler notified owners on January 16, 2014 that dealers would inspect vehicles and replace the steering linkage assembly, if necessary. On or about February 27, 2014, Chrysler ceased its recall remedy program due to parts quality concerns, and then re-initiated it on or about April 14, 2014. In July 2015, and under a consent order with NHTSA, the company agreed to offer owners three options for remedying their vehicles: perform the original remedy, offer to repurchase the vehicle at the fair market value plus 10%, or offer an additional incentive offer towards the purchase of a new Dodge, Jeep, Chrysler, or Fiat vehicle. Chrysler will notify owners of the new recall options in a letter expected to be mailed on August 31, 2015. Owners may contact Chrysler at 1-800-247-9753. Chrysler's recall campaign number is N49.
Aug 6, 2013
Chrysler Group LLC (Chrysler) is recalling certain model year 2012 RAM 3500 trucks manufactured May 4, 2012, through August 7, 2012; and model year 2012 RAM 4500 and 5500 trucks manufactured May 3, 2012, through August 7, 2012. Due to a loose snap ring inside the transmission, there may be a loss of power transfer through the transmission to the wheels.
Consequence & remedy
Consequence: An unexpected loss of power transfer may increase the risk of a crash.
Remedy: Chrysler will notify owners, and dealers will replace the transmission assembly free of charge. The recall began on October 17, 2013. Owners may contact Chrysler at 1-800-247-9753. Chrysler's recall campaign number is N50.
Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗
NHTSA investigations
1EA19001 · Electrical Overstress
Opened Apr 19, 2019 · Closed Sep 19, 2024
Status: closed (inferred from source dates) · Air Bags: Air Bag/restraint Control Module
The Office of Defects Investigation (ODI) opened this investigation to determine if the failure of airbags to deploy during severe crashes, in certain vehicles, was the result of a safety related defect. During the investigation a complex failure was studied that can result in non-deployment of subject vehicle air bags and other restraint system devices in severe crash events. The subject vehicles may be equipped with an airbag control unit (ACU) for the supplemental restraint system (SRS) Electronic Control Unit (ECU) manufactured by ZF-TRW. The ECU receives signals from crash sensors mounted in the vehicle and deploys the vehicle air bags and seat belt pretensioners in accordance with manufacturer design specifications. The ECU in the subject vehicles contains a model DS84 application-specific integrated circuit (ASIC) which controls the communication of the crash sensor signal, firing commands (i.e., when to deploy the airbag(s) and/or pretensioners), and fault information (e.g., diagnostic trouble codes). In September 2016, FCA announced recall 16V-668 for certain model year (MY) 2010 to 2014 Chrysler, Dodge and Jeep products manufactured with the subject ZF-TRW ACU. In this recall, FCA discussed an EOS condition that resulted in a failure of the subject DS84 ASIC, which caused air bag non-deployment. FCA noted that the defect condition had only been observed in vehicles equipped with sensor harnessing routed across the front of the vehicle. Other FCA vehicles that also used the subject ACU, but were not equipped with cross-car harnessing, had not experienced EOS failures, despite similar time in service. During the course of this investigation, ODI sent two separate Information Request (IR) letters to six vehicle manufactures (including FCA, Hyundai, Honda, Kia, Mitsubishi, and Toyota) and one IR letter to ZF-TRW. These IR letters resulted in ODI receiving comprehensive data from these manufacturers and suppliers. Studies of this data found that the DS84 ASIC does not have sufficient protection against negative electrical transients or electrical overstress (“EOS”) that can be generated in certain severe crashes. An electrical transient occurs when the electrical power supplied to a circuit changes momentarily over a short duration of time. In these severe crash cases, the crash sensors and other powered wiring can be damaged and short circuited so as to create a negative electrical transient of sufficient intensity and duration (that are outside the vehicle manufacturer's specification) to damage the ASIC before the restraint device deployment signal is received by the SRS ECU. This damaged signal can lead to incomplete or nondeployment of the air bags and/or pretensioners. Airbag non-deployment and/or lack of pretensioner operation can increase the risk or severity of injury in a crash.A total of 8 fatalities and 14 injuries were associated with known EOS events. The common element in all investigated manufacturers vehicles is the SRS ECU containing a DS84 ASIC manufactured by ZF-TRW. The risk associated with the ASIC is equally shared among all OEMS involved in the investigation. The actual real-world risk can be mitigated by other factors which were assessed by ODI during this investigation. The first mitigating factor involves protections built into the ACU design which protect the DS84 ASIC from damage. There are multiple strategies and levels of protection employed by different OEMs that provide effective EOS mitigation. The two most common strategies at the ACU level are circuit protection diodes on the remote senor signal lines, and current limiting resistors that protect critical components. The second mitigating factor is found at the vehicle level and involves the location and routing of the wires leading from the crash sensors to the SRS ECU. If the wires are well protected in a crash and are not routed with other power wires carrying large currents, the risk for an EOS event is significantly reduced or eliminated. These design specific factors combine to produce a spectrum of risk for the vehicles equipped with ACUs using the DS84 ASIC. Given the many of years of field exposure, it is possible to divide the subject population into two groups; vehicles which have experienced EOS events, and vehicles which have not experienced EOS field events. Four of the six OEMs involved in this investigation have experienced EOS field events on at least one of their models equipped with a DS84 ASIC. All vehicle models (including the Toyota models identified in the Failure Report Summary of the opening resume for this investigation) with field events have been recalled. In an abundance of caution, ODI kept this investigation open five years to monitor field performance and did not identify any field events on vehicles not included in existing safety recalls. Given the spectrum of risk identified in this investigation and that all vehicles with a demonstrated unreasonable risk have been recalled, ODI is closing this investigation. ODI is closing this investigation with the following manufacturer safety recalls: 16V-668, 18E-043, 18V-137, 18V-363, and 20V-024. With the recall actions taken by the subject vehicle and equipment manufacturers, this investigation is closed. The closing of this investigation does not constitute a finding by NHTSA that a safety-related defect does not exists on other model or model year vehicles outside of the recall scopes. The agency reserves the right to take further action if warranted by the circumstances.
Illustration