Camshaft lobe warn down from, from faulty rocker arm roller (needle bearing) (there is no to very little compression in cylinder 5), apparently engine is lubricated "by splash oil design" and people smarter then me have diagnosed that it is a design flaw.(having to do with the well and the height of the bores that accept the roc…
Read full complaint
Camshaft lobe warn down from, from faulty rocker arm roller (needle bearing) (there is no to very little compression in cylinder 5), apparently engine is lubricated "by splash oil design" and people smarter then me have diagnosed that it is a design flaw.(having to do with the well and the height of the bores that accept the rocker arms) The engine only had 118,000 miles when the engine light came on, resulted in a severe knocking sound and misfiring. I expected a well taken care of motor with regular oil changes would last 200,000 miles. My choices are to rebuild the motor and or replace, both are costly. Thanks for taking the time to read my complaint. [XXX] INFORMATION Redacted PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6).
NHTSA ODI #11442759
Mileage unknown · Nov 28, 2021
Electrical SystemEngineFuel/propulsion System
TIPM is sending intermittent signal to fuel pump relay cause truck to stall at highway speeds.
NHTSA ODI #11441852
Mileage unknown · Aug 25, 2021
Electrical SystemEnginePower Train
THE TRUCK STALLED OUT ON THE HIGHWAY DOING 60 MILES PER HOUR ALMOST GOT IN SERIOUS ACCIDENT. NO STEERING OR BRAKES. (COULD BE DEADLY). THIS ALSO HAPPENED AGAIN MAKING A RIGHT TURN THRU AN INTERSECTION. WAS TOLD IT IS SOMETHING TO DO WITH FUSE BOX TIPM TOTAL INTEGRATED POWER MODULE
NHTSA ODI #11430497
Mileage unknown · Aug 18, 2021
EngineFuel/propulsion System
SEEMS LIKE THIS IS NOT NEW, OTHERS THAT OWN THE SAME 1500 MODEL HAVE ISSUES WITH LIFTS AND CAMSHAFT CAUSING A MISS FIRE, P030SOMETHING (MINES IS P0303). THE SPARK PLUS/ FUEL INJECTORS/ AND COIL PACKS HAVE BEEN CHANGED. OUT OF NOWHERE I GET A CODE WHILE DRIVING OUT OF TOWN. THE TRUCK HAS ALWAYS HAD A RUNNING TICK TO IT. I HAVE M…
Read full complaint
SEEMS LIKE THIS IS NOT NEW, OTHERS THAT OWN THE SAME 1500 MODEL HAVE ISSUES WITH LIFTS AND CAMSHAFT CAUSING A MISS FIRE, P030SOMETHING (MINES IS P0303). THE SPARK PLUS/ FUEL INJECTORS/ AND COIL PACKS HAVE BEEN CHANGED. OUT OF NOWHERE I GET A CODE WHILE DRIVING OUT OF TOWN. THE TRUCK HAS ALWAYS HAD A RUNNING TICK TO IT. I HAVE MY VECHILE SERVICED BY DODGE THEMSELVES. THEY NEVER STATED IT WAS AN ISSUE. THIS IS A BIG ISSUE IN HEMI 5.7 ENGINES MANUFACTURED AFTER THE REDESIGNED FROM THE MAGNUM PLATFORM.
NHTSA ODI #11429524
160,000 miles · May 2, 2021
Engine
2012 RAM 1500 HEMI TICK ISSUE. SUPPOSED TO BE A LIFTER. REPLACED ALL LIFTERS AND NOW MY TRUCK WONT START. TOOK IT TO A SHOP AND WAS TOLD I NEED A NEW ENGINE.
NHTSA ODI #11414787
129,000 miles · Mar 23, 2021
Engine
TL* THE CONTACT OWNS A 2012 RAM 1500. THE CONTACT STATED THAT THE VEHICLE FAILED TO ACCELERATE FORWARD DRIVING AT VARIOUS SPEEDS. THE CHECK ENGINE WARNING LIGHT ILLUMINATED AND THE VEHICLE BEGAN TO MISFIRE AND SHUDDER. THE VEHICLE WAS TAKEN TO AN INDEPENDENT MECHANIC WHERE IT WAS DIAGNOSED THAT THE ENGINE COILS NEEDED TO BE REPL…
Read full complaint
TL* THE CONTACT OWNS A 2012 RAM 1500. THE CONTACT STATED THAT THE VEHICLE FAILED TO ACCELERATE FORWARD DRIVING AT VARIOUS SPEEDS. THE CHECK ENGINE WARNING LIGHT ILLUMINATED AND THE VEHICLE BEGAN TO MISFIRE AND SHUDDER. THE VEHICLE WAS TAKEN TO AN INDEPENDENT MECHANIC WHERE IT WAS DIAGNOSED THAT THE ENGINE COILS NEEDED TO BE REPLACED. THE VEHICLE WAS REPAIRED HOWEVER, THE FAILURE RECURRED. NO DEALER WAS CONTACTED. THE MANUFACTURER WAS NOTIFIED OF THE FAILURE AND INFORMED THE CONTACT THAT THE VIN WAS NOT UNDER RECALL. THE FAILURE MILEAGE WAS APPROXIMATELY 129,000.
NHTSA ODI #11404553
110,000 miles · Mar 22, 2021
Engine
ALONG WITH MANY OTHER PEOPLE WHO OWN THE SAME MODEL OF TRUCK I HAVE EVERYONE HAS SEEMED TO COME ACROSS THE SAME PROBLEM WITH THE CAMSHAFT AND LIFTERS CAUSING EVERY CAR PLACE IN MY STATE TO BE OUT OF THE PARTS TO FIX IT. I NOTICED THE TRUCK WAS HAVING A HARD TIME SHIFTING AND ACTING WEIRD SO I BROUGHT IT IN TO GET CODED AND WHEN …
Read full complaint
ALONG WITH MANY OTHER PEOPLE WHO OWN THE SAME MODEL OF TRUCK I HAVE EVERYONE HAS SEEMED TO COME ACROSS THE SAME PROBLEM WITH THE CAMSHAFT AND LIFTERS CAUSING EVERY CAR PLACE IN MY STATE TO BE OUT OF THE PARTS TO FIX IT. I NOTICED THE TRUCK WAS HAVING A HARD TIME SHIFTING AND ACTING WEIRD SO I BROUGHT IT IN TO GET CODED AND WHEN IT WAS GETTING CODED I WAS TOLD BY THE TECH THAT THE 7TH CYLINDER WAS OUT ALONG WITH ISSUES WITH THE CAMSHAFT AND HE HAS SEEN IT IN AN ALARMING AMOUNT OF TRUCKS. SO MUCH THAT THEY COULDN'T GET HANDS ON THE PARTS TO CORRECT THIS ISSUE. UPON LOOKING ONLINE THIS IS INDEED A HUGE ISSUE IN HEMI 5.7 ENGINES MANUFACTURED AFTER 2010.
NHTSA ODI #11404162
59,000 miles · Feb 23, 2021
Electrical SystemEngine
WHEN THE VEHICLE IS RUNNING AND AT SPEED ON THE HIGHWAY, INTERSTATE, OR STREET OCCASIONALLY THE VEHICLE WILL SHUT OFF CAUSING NO LIGHTS IF OPERATING AT NIGHT TIME AND NO POWER STEERING AND GAUGE CLUSTER IS ALSO OFF. AFTER PULLING OVER AS SAFE AS POSSIBLE AND JIGGLING THE IGNITION KEY AND TURNING IGNITION KEY TO START THE VEHICLE…
Read full complaint
WHEN THE VEHICLE IS RUNNING AND AT SPEED ON THE HIGHWAY, INTERSTATE, OR STREET OCCASIONALLY THE VEHICLE WILL SHUT OFF CAUSING NO LIGHTS IF OPERATING AT NIGHT TIME AND NO POWER STEERING AND GAUGE CLUSTER IS ALSO OFF. AFTER PULLING OVER AS SAFE AS POSSIBLE AND JIGGLING THE IGNITION KEY AND TURNING IGNITION KEY TO START THE VEHICLE THEN IT WILL START AND RUN NORMALLY UNTIL THE NEXT INCIDENT ACCRUES. I HAVE FOUND THAT THE IGNITION ON THESE PARTICULAR VEHICLES GO BAD FOR WHATEVER REASON AND LOSE CONTACT WHICH TURNS THE VEHICLE OFF WHILE DRIVING AT ANYTIME. ON MY VEHICLE IT DOESN'T ACCRUE ALL THE TIME BUT ENOUGH TO MAKE IT VERY UNSAFE. MY VEHICLE JUST TURNED 59,000 MILES AND HAVEN'T HAD ANY ISSUES UNTIL NOW.
POWER WINDOWS WORKED WEN THEY WANTED TO . WHILE DRIVING ALL WARNING LIGHTS WOULD FLASH ON IN THE CLUSTER LIKE I TURNED THE KEY OFF THEN ON . TRUCK KEPT RUNNING . STARTED GETTING HARD TO START . ONCE LOST POWER WHILE DRIVING LIKE IT WAS RUNNING OUT OF GAS . NOW IT DOESN'T START AT ALL . HAD IT TOWED TO DEALER THEY TOLD ME IT WAS …
Read full complaint
POWER WINDOWS WORKED WEN THEY WANTED TO . WHILE DRIVING ALL WARNING LIGHTS WOULD FLASH ON IN THE CLUSTER LIKE I TURNED THE KEY OFF THEN ON . TRUCK KEPT RUNNING . STARTED GETTING HARD TO START . ONCE LOST POWER WHILE DRIVING LIKE IT WAS RUNNING OUT OF GAS . NOW IT DOESN'T START AT ALL . HAD IT TOWED TO DEALER THEY TOLD ME IT WAS THE TIPM . I UNDERSTAND THIS IS A COMMON PROBLEM WITH THE RAM TRUCKS .
Chrysler (FCA US LLC) is recalling certain 2009-2012 Dodge Ram 1500 trucks currently, or ever registered, in Connecticut, Delaware, Illinois, Indiana, Iowa, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, West Virginia, Wisconsin and the District of Columbia. Exposure to environmental conditions such as water mixed with road salt may cause the front fuel tank strap frame "T-Slot" bracket to corrode, possibly causing the fuel tank to drop and make contact with the ground.
Consequence & remedy
Consequence: If the fuel tank were to drop and contact the ground, a fuel leak may result. Additionally, in the event of a crash, the fuel tank may not remain secured to the vehicle, possibly causing a fuel leak. A fuel leak in the presence in an ignition source, can increase the risk of a fire.
Remedy: Chrysler will notify owners and dealers will bolt a bracket reinforcement to the frame, free of charge. The recall began May 2, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is U04.
Chrysler (FCA US LLC) is recalling various Dodge, Chrysler, and RAM vehicles equipped with Kidde Plastic-Handle or Push Button 'Pindicator' Fire Extinguishers. A list of the affected trailer models is available at: https://static.nhtsa.gov/odi/rcl/2017/RMISC-17V824-0103.pdf. These extinguishers may become clogged, preventing the extinguisher from discharging as expected or requiring excessive force to activate the extinguisher. Additionally, in certain models, the nozzle may detach from the valve assembly with enough force that it could cause injury and also render the product inoperable. For a full list of the affected fire extinguisher models visit: https://static.nhtsa.gov/odi/rcl/2017/RMISC-17E062-5427.pdf
Consequence & remedy
Consequence: If the fire extinguisher does not function properly, it can increase the risk of injury in the event of a fire.
Remedy: Chrysler will notify owners instructing them to contact Kidde for a replacement fire extinguisher, free of charge. The recall began February 14, 2018. Owners may contact Chrysler customer service at 1-800-853-1403 or Kidde customer service service toll-free at 1-855-262-3540, or online at www.kidde.com and click on "Product Safety Recall" for more information. Chrysler's number for this recall is T82.
Chrysler (FCA US LLC) is recalling certain 2016-2017 Ram 3500 Cab Chassis with a Gross Vehicle Weight Rating (GVWR) of less than 10,000 lbs, 2011-2017 Ram 3500, 4500 and 5500 Cab Chassis vehicles, 2009-2017 Ram 1500 and 2010-2017 Ram 2500 and 3500 pickup trucks, all equipped with a column shifter. Pushing the brake pedal for prolonged periods when the vehicle is running and in PARK may cause the Brake Transmission Shift Interlock (BTSI) pin to stick in the open position. With the pin in the open position, the transmission can be shifted out of PARK into any gear without pushing the brake pedal or having the key in the ignition.
Consequence & remedy
Consequence: Being able to shift the transmission without pushing the brake pedal and/or without a key in the ignition can increase the risk of an unintended vehicle rollaway that may result in personal injury or a crash.
Remedy: Chrysler will notify owners, and dealers will update the vehicle software, inspect the BTSI, and, as necessary, replace it, free of charge. The recall began February 26, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is T79.
Chrysler (FCA US LLC) is recalling certain model year 2012-2014 Ram 1500, 2500, 3500, 4500, and 5500 trucks manufactured January 18, 2011, to October 7, 2014, and equipped with the Electronic Vehicle Information Center option. The affected vehicles have a steering wheel wiring harness that may rub against the driver air bag module retainer spring.
Consequence & remedy
Consequence: This abrasion may result in an electrical short that could cause driver's frontal air bag to unexpectedly deploy. Inadvertent deployment of the air bag may increase the risk of injury and the possibility of a vehicle crash.
Remedy: Chrysler will notify owners, and dealers will inspect, repair as necessary, and secure the steering wheel wiring harness. Additionally, protective caps will be added to the air bag retainer spring ends. These repairs will be done free of charge. The recall began on September 18, 2015. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is R36.
Chrysler is recalling certain model year 2009-2012 Ram 1500 trucks manufactured from February 27, 2008, through June 30, 2009, and from December 1, 2009, through October 20, 2011; model year 2009-2011 Dodge Dakota trucks manufactured from February 27, 2007, through June 30, 2009, and from December 1, 2009, through September 30, 2011; model year 2009 Chrysler Aspen trucks manufactured from January 3, 2008, through December 18, 2008; and model year 2009 Dodge Durango trucks manufactured from January 3, 2008, through December 18, 2008. The rear axle pinion nut may loosen due to an undersized pinion spline that can allow relative motion between the nut and companion flange.
Consequence & remedy
Consequence: If the rear axle pinion nut loosens, the axle can lock up and cause a loss of vehicle control and/or a vehicle crash with little warning.
Remedy: On November 7, 2013 Chrysler notified owners that dealers would install a pinion nut retainer, free of charge. In July 2015, and under a consent order with NHTSA, the company agreed to offer owners three options for remedying their vehicles: perform the original remedy, offer to repurchase the vehicle at the fair market value plus 10%, or offer an additional incentive offer towards the purchase of a new Dodge, Jeep, Chrysler, or Fiat vehicle. Chrysler will notify owners of the new recall options in a letter expected to be mailed on August 31, 2015. Owners may contact Chrysler at 1-800-247-9753. Chrysler's recall campaign number is N08.
CHRYSLER IS RECALLING CERTAIN MODEL YEAR 2012 RAM 1500 TRUCKS, MANUFACTURED FROM JANUARY 5, 2012 THROUGH JANUARY 6, 2012. THE AFFECTED VEHICLES HAVE A SPARE TIRE THAT DOES NOT MATCH THE SPECIFICATIONS LISTED ON THE TIRE PLACARD. THUS, THESE VEHICLES FAIL TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 110, TIRE SELECTION AND RIMS.
Consequence & remedy
Consequence: IF INSTALLED, THE INCORRECTLY SIZED SPARE TIRE MAY UNEXPECTEDLY ACTIVATE THE ELECTRONIC STABILITY CONTROL (ESC) SYSTEM, ALTERING THE EFFECTIVENESS OF THE ESC SYSTEM, INCREASING THE RISK OF A CRASH.
Remedy: CHRYSLER WILL NOTIFY OWNERS, AND DEALERS WILL INSPECT AND REPAIR VEHICLES AS NECCESSARY FREE OF CHARGE. THE SAFETY RECALL BEGAN ON MAY 21, 2012. OWNERS SHOULD CONTACT CHRYSLER AT 1-800-853-1403.
Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗
NHTSA investigations
1
EA19001 · Electrical Overstress
Opened Apr 19, 2019 · Closed Sep 19, 2024
Status: closed (inferred from source dates) · Air Bags: Air Bag/restraint Control Module
The Office of Defects Investigation (ODI) opened this investigation to determine if the failure of airbags to deploy during severe crashes, in certain vehicles, was the result of a safety related defect. During the investigation a complex failure was studied that can result in non-deployment of subject vehicle air bags and other restraint system devices in severe crash events. The subject vehicles may be equipped with an airbag control unit (ACU) for the supplemental restraint system (SRS) Electronic Control Unit (ECU) manufactured by ZF-TRW. The ECU receives signals from crash sensors mounted in the vehicle and deploys the vehicle air bags and seat belt pretensioners in accordance with manufacturer design specifications. The ECU in the subject vehicles contains a model DS84 application-specific integrated circuit (ASIC) which controls the communication of the crash sensor signal, firing commands (i.e., when to deploy the airbag(s) and/or pretensioners), and fault information (e.g., diagnostic trouble codes). In September 2016, FCA announced recall 16V-668 for certain model year (MY) 2010 to 2014 Chrysler, Dodge and Jeep products manufactured with the subject ZF-TRW ACU. In this recall, FCA discussed an EOS condition that resulted in a failure of the subject DS84 ASIC, which caused air bag non-deployment. FCA noted that the defect condition had only been observed in vehicles equipped with sensor harnessing routed across the front of the vehicle. Other FCA vehicles that also used the subject ACU, but were not equipped with cross-car harnessing, had not experienced EOS failures, despite similar time in service. During the course of this investigation, ODI sent two separate Information Request (IR) letters to six vehicle manufactures (including FCA, Hyundai, Honda, Kia, Mitsubishi, and Toyota) and one IR letter to ZF-TRW. These IR letters resulted in ODI receiving comprehensive data from these manufacturers and suppliers. Studies of this data found that the DS84 ASIC does not have sufficient protection against negative electrical transients or electrical overstress (“EOS”) that can be generated in certain severe crashes. An electrical transient occurs when the electrical power supplied to a circuit changes momentarily over a short duration of time. In these severe crash cases, the crash sensors and other powered wiring can be damaged and short circuited so as to create a negative electrical transient of sufficient intensity and duration (that are outside the vehicle manufacturer's specification) to damage the ASIC before the restraint device deployment signal is received by the SRS ECU. This damaged signal can lead to incomplete or nondeployment of the air bags and/or pretensioners. Airbag non-deployment and/or lack of pretensioner operation can increase the risk or severity of injury in a crash.A total of 8 fatalities and 14 injuries were associated with known EOS events. The common element in all investigated manufacturers vehicles is the SRS ECU containing a DS84 ASIC manufactured by ZF-TRW. The risk associated with the ASIC is equally shared among all OEMS involved in the investigation. The actual real-world risk can be mitigated by other factors which were assessed by ODI during this investigation. The first mitigating factor involves protections built into the ACU design which protect the DS84 ASIC from damage. There are multiple strategies and levels of protection employed by different OEMs that provide effective EOS mitigation. The two most common strategies at the ACU level are circuit protection diodes on the remote senor signal lines, and current limiting resistors that protect critical components. The second mitigating factor is found at the vehicle level and involves the location and routing of the wires leading from the crash sensors to the SRS ECU. If the wires are well protected in a crash and are not routed with other power wires carrying large currents, the risk for an EOS event is significantly reduced or eliminated. These design specific factors combine to produce a spectrum of risk for the vehicles equipped with ACUs using the DS84 ASIC. Given the many of years of field exposure, it is possible to divide the subject population into two groups; vehicles which have experienced EOS events, and vehicles which have not experienced EOS field events. Four of the six OEMs involved in this investigation have experienced EOS field events on at least one of their models equipped with a DS84 ASIC. All vehicle models (including the Toyota models identified in the Failure Report Summary of the opening resume for this investigation) with field events have been recalled. In an abundance of caution, ODI kept this investigation open five years to monitor field performance and did not identify any field events on vehicles not included in existing safety recalls. Given the spectrum of risk identified in this investigation and that all vehicles with a demonstrated unreasonable risk have been recalled, ODI is closing this investigation. ODI is closing this investigation with the following manufacturer safety recalls: 16V-668, 18E-043, 18V-137, 18V-363, and 20V-024. With the recall actions taken by the subject vehicle and equipment manufacturers, this investigation is closed. The closing of this investigation does not constitute a finding by NHTSA that a safety-related defect does not exists on other model or model year vehicles outside of the recall scopes. The agency reserves the right to take further action if warranted by the circumstances.
2012 Dodge RAM 1500 Problems, Complaints & Recalls | Skip That Year
Illustration