IllustrationWas driving normally going 65 mph on the highway when white smoke was emitting from inside the steering wheel. Between the dashboard and steering wheel. Engine was fine and no warning lights came on. Everything ran great except for the white smoke. I don’t know what it could be. Luckily it didn’t catch on fire
2010 Dodge Challenger
Owner reports · Recalls · Investigations
More warning signs than most Challenger years
Owner complaints for the 2010 Dodge Challenger are substantially higher than the model-year median of 45.
About this comparison →How this year compares
Owner complaints by model year
Compare all Challenger years →Counts vary with age, sales and reporting. They are not failure rates.
What owners reported most
All reported categories
Tap a category to read its complaints. One report may name several components.
When problems were reported
Mileage at the reported incident
880–25K
4325–50K
3850–75K
2075–100K
17100–150K
8150K+
214 reports with mileage · 85 unknown
NHTSA’s mileage field refers to the reported incident, not necessarily the filing date. This shows report counts, not the likelihood of a failure.
What to inspect
Issues worth paying extra attention to based on owner reports.
- Air Bags. Review the 75 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
- Engine. Review the 75 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
- Electrical System. Review the 68 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
NHTSA owner reports · September 18, 2026 snapshot.
10 crash reports4 fire reports8 injury reports
Steering complaints
33 reportsThe car has an intermittent issue where at highway speeds it will go into almost a limp mode. Basically the check engine light comes on and car loses power and won't go over 45 mph. I have to pull over and shut car off. It will restart and operate normally for a random period of time. Very dangerous when on the highway and have …
Read full complaint
The car has an intermittent issue where at highway speeds it will go into almost a limp mode. Basically the check engine light comes on and car loses power and won't go over 45 mph. I have to pull over and shut car off. It will restart and operate normally for a random period of time. Very dangerous when on the highway and have to pull over to the side of the road. From the forums I belong to, this is a very common problem. There are even members that have bought a brand new Challenger and had this happen to them after a few months. The code that usually appears from this is misfire on cylinder 1 and even the dealerships don't know what causes it and hard to diagnose since it happens randomly. Love the car but very annoyed that this keeps happening and no one can figure out the fix
DURING ITS MOST RECENT SCHEDULED OIL CHANGE ON MAY 25, 2018, THE DODGE SERVICE DEPARTMENT INDICATED THAT MY 2010 CHALLENGER SRT8 WITH 56,000 MILES HAS AN OIL LEAK THAT IS LEAKING FROM THE FRONT OF THE CRANKSHAFT AND THE DODGE CHALLENGER SERPENTINE/DRIVE BELT IS SPRAYING OIL ALL OVER THE PLACE UNDER THE HOOD, ON THE ENGINE AND DI…
Read full complaint
DURING ITS MOST RECENT SCHEDULED OIL CHANGE ON MAY 25, 2018, THE DODGE SERVICE DEPARTMENT INDICATED THAT MY 2010 CHALLENGER SRT8 WITH 56,000 MILES HAS AN OIL LEAK THAT IS LEAKING FROM THE FRONT OF THE CRANKSHAFT AND THE DODGE CHALLENGER SERPENTINE/DRIVE BELT IS SPRAYING OIL ALL OVER THE PLACE UNDER THE HOOD, ON THE ENGINE AND DIRECTLY INTO THE ALTERNATOR WHICH THE DODGE SERVICE DEPARTMENT INDICATED COULD CAUSE A FIRE! I CONTACTED FIAT CHRYSLER AUTOMOBILES CUSTOMER CARE (CASE NUMBER 34409843) AND PROVIDED DETAIL WITH AFTER 5 CUSTOMER CARE AGENTS ON 5 SEPARATE OCCASIONS PROMISING ME A CALLBACK (NEVER RECEIVED) WISHED ME GOOD LUCK WITH HAVING DODGE ADDRESS THE ENGINE OIL LEAK / FIRE HAZARD. I HAVE INQUIRED WITH TWO OTHER LOCAL DODGE DEALERSHIP SERVICE DEPARTMENTS AND BOTH INDICATED THAT THEY HAVE NEVER SEEN THIS TYPE OF ISSUE ON A 2010 DODGE CHALLENGER SRT8. ON JULY 3, 2018, I ONCE AGAIN CONTACTED FIAT CHRYSLER AUTOMOBILES CUSTOMER CARE AND WAS ADVISED THAT CASE NUMBER 34409843 WAS UNILATERALLY CLOSED BY A SUPERVISOR WITHOUT CONTACTING ME OR THE DODGE DEALERSHIP SERVICE DEPARTMENT THAT PERFORMS ALL MAINTENANCE ON MY 2010 DODGE CHALLENGER SRT8. ACCORDINGLY, I REQUESTED AND THE FIAT CHRYSLER AUTOMOBILES CUSTOMER CARE REPRESENTATIVE OPENED UP A NEW CASE (CASE NUMBER 34660813) CASE NUMBER 34409843 05/25/2018-GABRIEL EMPLOYEE ID GW373 06/13/2013-JAKE EMPLOYEE ID JR2692 06/20/2018-ROBERT EMPLOYEE ID RC2336 06/20/2018-LAUREN EMPLOYEE ID LUW551 07/03/2018-JANELLE (REFUSED TO PROVIDE EMPLOYEE ID) CASE NUMBER 34660813 07/03/2018-DOAA EMPLOYEE ID DH1013 SINCE THE SERVICE VISIT ON MAY 25, 2018, I HAVE NOT BEEN ABLE TO DRIVE MY VEHICLE FOR FEAR THAT IT WILL CATCH FIRE.
MY 2010 DODGE CHALLENGER SRT8 COMPLETELY SHUTS DOWN WHILE DRIVING FOR NO APPARENT REASON. THE ENGINE TURNS OFF AND I LOSE POWER STEERING. IT DOES THIS REPEATEDLY WHILE DRIVING AT ALL SPEEDS. ALL ELECTRICAL COMPONENTS WORK WHEN THIS HAPPENS BUT THE POWER STEERING MAKES IT VERY HARD TO TURN THE VEHICLE WHICH MAKES IT VERY DANGEROU…
Read full complaint
MY 2010 DODGE CHALLENGER SRT8 COMPLETELY SHUTS DOWN WHILE DRIVING FOR NO APPARENT REASON. THE ENGINE TURNS OFF AND I LOSE POWER STEERING. IT DOES THIS REPEATEDLY WHILE DRIVING AT ALL SPEEDS. ALL ELECTRICAL COMPONENTS WORK WHEN THIS HAPPENS BUT THE POWER STEERING MAKES IT VERY HARD TO TURN THE VEHICLE WHICH MAKES IT VERY DANGEROUS IN TRAFFIC OR ON THE HIGHWAY. I HAVE TO PUT THE VEHICLE IN PARK PRESS MY IGNITION START BUTTON TO TURN THE CAR COMPLETELY TO THE OFF POSITION AND RESTART THE VEHICLE. THERE ARE NO CHECK ENGINE LIGHTS THAT ILLUMINATE AFTER THIS HAPPENS SO THE DODGE DEALER DOES NOT KNOW WHAT THE PROBLEM IS. THE LAST TIME THIS HAPPENED MY ABS AND TRACTION CONTROL LIGHT HAS ILLUMINATED AND MY ESP, TRACTION CONTROL AND ANTI LOCK BRAKE SYSTEM WAS DISABLED AND HASN'T BEEN ENABLED. AFTER STARTING THE CAR THE ESP, TC AND ABS LIGHT ILLUMINATE AND STAY ON. I HAVE TAKEN MY VEHICLE TO THE DODGE DEALER THREE TIMES AND THEY HAVE SAID THAT THEY ARE NOT ABLE TO FIND THE PROBLEM BECAUSE THERE ARE NO TROUBLE CODES OR A CHECK ENGINE LIGHT ON. I HAVE READ ONLINE THAT THIS IS A VERY COMMON ISSUE THAT THOUSANDS OF OWNERS OF DODGE CHALLENGERS ARE EXPERIENCING WITH THE SAME RESULT THAT THE DODGE SERVICE DEPARTMENTS CAN NOT FIND OR DUPLICATE THE PROBLEM. THIS RANDOM ENGINE SHUT OFF HAS HAPPENED AROUND 40 TIMES. IT'S HAPPENED ON THE HIGHWAY IN MOTION AT SPEEDS OF 75 MPH ON THE CITY STREET FROM 30-50 MPH AND WHEN LEAVING AN INTERSECTION AFTER THE STOP LIGHT TURNS GREEN LEAVING ME STOPPED IN THE MIDDLE OF THE INTERSECTION IN DANGER OF BIENG HIT BY ONCOMING TRAFFIC. IT HAS ALSO HAPPENED WHILE TURNING IN A INTERSECTION AND THE VEHICLE STOPPING WITH ONCOMING TRAFFIC HEADING TOWARDS MY VEHICLE. I HAVE NEARLY BEEN HIT NUMEROUS TIMES DUE TO THIS PROBLEM. I HAVE PROOF OF MY VEHICLE TAKEN TO THE DEALER TO RESOLVE THIS ISSUE WITH NO LUCK AS TO WHAT THE DANGEROUS PROBLEM IS.
TL* THE CONTACT OWNS A 2010 DODGE CHALLENGER. WHILE DRIVING 15 MPH, THE VEHICLE STALLED WITHOUT WARNING. THE CONTACT LOST POWER STEERING AND THE BRAKES BECAME INOPERABLE. THE VEHICLE WAS TAKEN TO THE DEALER TO BE DIAGNOSED. THE TECHNICIAN WAS UNABLE TO DIAGNOSE THE CAUSE OF THE FAILURE. THE VEHICLE WAS NOT REPAIRED. THE MANUFACT…
Read full complaint
TL* THE CONTACT OWNS A 2010 DODGE CHALLENGER. WHILE DRIVING 15 MPH, THE VEHICLE STALLED WITHOUT WARNING. THE CONTACT LOST POWER STEERING AND THE BRAKES BECAME INOPERABLE. THE VEHICLE WAS TAKEN TO THE DEALER TO BE DIAGNOSED. THE TECHNICIAN WAS UNABLE TO DIAGNOSE THE CAUSE OF THE FAILURE. THE VEHICLE WAS NOT REPAIRED. THE MANUFACTURER WAS NOT NOTIFIED OF THE FAILURE. THE APPROXIMATE FAILURE MILEAGE WAS 48,000.
PURCHASED NEW IN 11/2010. 2 YEARS INTO OWNERSHIP, ON ABOUT 4 OCCURANCES, ENGINE WOULD SHUT OFF, LOOSE STEERING CONTROL AND BRAKES AT THE SAME TIME WHILE MAKING A SLOW RIGHT HAND TURN. PROBLEM DISAPPEARED AND THOUGHT IT WAS A FLUKE OF SOME KIND. NOW 3 YEARS LATER IT HAS STARTED DOING IT AGAIN EVERY TIME I DRIVE IT. WHEN THE ENGI…
Read full complaint
PURCHASED NEW IN 11/2010. 2 YEARS INTO OWNERSHIP, ON ABOUT 4 OCCURANCES, ENGINE WOULD SHUT OFF, LOOSE STEERING CONTROL AND BRAKES AT THE SAME TIME WHILE MAKING A SLOW RIGHT HAND TURN. PROBLEM DISAPPEARED AND THOUGHT IT WAS A FLUKE OF SOME KIND. NOW 3 YEARS LATER IT HAS STARTED DOING IT AGAIN EVERY TIME I DRIVE IT. WHEN THE ENGINE DIES YOU CAN BARELY STEER AND HAVE TO REALLY PULL HARD ON THE STEERING WHEEL TO KEEP FROM GOING INTO ONCOMING TRAFFIC. BRAKES DO NOT FUNCTION PROPERLY EITHER, YOU LOOSE ALL POWER BRAKING AND IT IS VERY DIFFICULT TO STOP. I HAVE SEARCHED THE INTERNET FOR THIS ISSUE EXTENSIVELY. WHAT I HAVE FOUND IS ABOUT A HUNDRED OTHER DIFFERENT INDIVIDUALS ON SEVERAL FORUM SITES DESCRIBING EXACTLY THE SAME PROBLEM. NOBODY HAD AN ANSWER TO THE PROBLEM AND FOUND JUST AS MANY DIFFERENT THINGS THAT PEOPLE SAID WERE WRONG RANGING FROM ECM FAILURE TO SEVERAL DIFFERENT MODULES AND LOOSE CONNECTIONS. WHEN IT FIRST STARTED IT WOULD ONLY OCCUR WHEN SLOWING DOWN AND MAKING A RIGHT HAND TURN. NOW IT DOES IT AT ANY TIME NO MATTER WHETHER SITTING IN A PARKING LOT OR DRIVING ON THE STREET. YOU HAVE TO TURN THE KEY ALL THE WAY OFF AND THEN TURN IT BACK ON TO START IT AND THERE IS ALWAYS A DELAY FROM THE TIME YOU DO THAT TILL THE TIME IT RESPONDS. THIS IS A VERY DANGEROUS SAFETY ISSUE AND A RECALL SHOULD BE DONE AS SO MANY PEOPLE HAVE HAD THE SAME ISSUE WITHOUT IT EVER BEING CLEARLY UNDERSTOOD WHAT WAS CAUSING THE PROBLEM.
CAR SHUT DOWN/POWERED OFF/TURNED OFF ON IT'S OWN, WHILE DRIVING. RAPID AUTOMATIC DOWN SHIFT OF GEARS BRAKING FROM ABOUT 65 TO TURN/WHILE TURNING LEFT ONTO SIDE STREET ON ROAD. CAR DIED AFTER STEERING WHEEL BEGAN TURNING TO LEFT AND CAR WAS TURNING. LOST POWER STEERING AND POWER BRAKES. NEARLY SLAMMED INTO EMBANKMENT AND BLOCKED …
Read full complaint
CAR SHUT DOWN/POWERED OFF/TURNED OFF ON IT'S OWN, WHILE DRIVING. RAPID AUTOMATIC DOWN SHIFT OF GEARS BRAKING FROM ABOUT 65 TO TURN/WHILE TURNING LEFT ONTO SIDE STREET ON ROAD. CAR DIED AFTER STEERING WHEEL BEGAN TURNING TO LEFT AND CAR WAS TURNING. LOST POWER STEERING AND POWER BRAKES. NEARLY SLAMMED INTO EMBANKMENT AND BLOCKED INTERSECTION AREA. VERY DIFFICULT TO CONTROL/HARD TO SAFE VEHICLE: HARD TO TURN, STOP, AND RESTART. CHECK ENGINE LIGHT DID NOT COME ON/NO ODB CODES STORED. THIS WAS SPECIFICALLY SCARY AS PEOPLE DRIVE THROUGH HERE FAST AND VISIBILITY IS VERY SHORT. AFTER THIS EVENT AND THE EVENT IN JULY, I BECAME AFRAID I COULD DIE IN THIS CAR. I TOOK IT TO THE DEALERSHIP. THEY SAID A FEW ERROR CODES WERE SAVED IN OUTER CAR SYSTEMS THAT SHOWED COMMUNICATION WITH PCM HAD BEEN LOST. THEY WERE REPLACING THE PCM. HOWEVER, REPLACING THE PCM DID NOT CORRECT THE PROBLEM. IT HAS DIED 3 TIMES SINCE I STARTED DRIVING IT IN THE SPRING THIS YEAR. THIS IS DANGEROUS!!! THE DEALERSHIP REFUSES TO INVESTIGATE FURTHER. PLEASE HELP.
CAR SHUT DOWN/POWERED OFF/TURNED OFF ON IT'S OWN, WHILE DRIVING ABOUT 50 MPH ON A STATE HIGHWAY. CAR DIED WHILE DRIVING STRAIGHT THROUGH AN INTERSECTION AT RUSH HOUR. LOST POWER STEERING AND POWER BRAKES. VERY DIFFICULT TO CONTROL/HARD TO SAFE VEHICLE: HARD TO TURN, STOP, AND RESTART. CHECK ENGINE LIGHT DID NOT COME ON/NO ODB CO…
Read full complaint
CAR SHUT DOWN/POWERED OFF/TURNED OFF ON IT'S OWN, WHILE DRIVING ABOUT 50 MPH ON A STATE HIGHWAY. CAR DIED WHILE DRIVING STRAIGHT THROUGH AN INTERSECTION AT RUSH HOUR. LOST POWER STEERING AND POWER BRAKES. VERY DIFFICULT TO CONTROL/HARD TO SAFE VEHICLE: HARD TO TURN, STOP, AND RESTART. CHECK ENGINE LIGHT DID NOT COME ON/NO ODB CODES STORED. SCARY DANGEROUS. THIS NEARLY CAUSED A MULTI CAR ACCIDENT. THE RISK ASSOCIATED WITH THESE SHUT DOWN EVENTS WAS INCREASING DRASTICALLY.
CAR SHUT DOWN/POWERED OFF/TURNED OFF ON IT'S OWN, WHILE DRIVING AT ABOUT 40 MPH IN RESIDENTIAL AREA. THIS IS ABOUT THE 5TH SPECIFIC TIME I REMEMBER. LOST POWER STEERING AND POWER BRAKES. VERY DIFFICULT TO CONTROL/HARD TO SAFE VEHICLE: HARD TO TURN, STOP, AND RESTART. CHECK ENGINE LIGHT DID NOT COME ON/NO ODB CODES STORED. DEALER…
Read full complaint
CAR SHUT DOWN/POWERED OFF/TURNED OFF ON IT'S OWN, WHILE DRIVING AT ABOUT 40 MPH IN RESIDENTIAL AREA. THIS IS ABOUT THE 5TH SPECIFIC TIME I REMEMBER. LOST POWER STEERING AND POWER BRAKES. VERY DIFFICULT TO CONTROL/HARD TO SAFE VEHICLE: HARD TO TURN, STOP, AND RESTART. CHECK ENGINE LIGHT DID NOT COME ON/NO ODB CODES STORED. DEALERSHIP COULDN'T FIND ANYTHING PROBLEM WITH CAR AFTER JULY 7, 2012 EVENT. THEY COULDN'T FIND PROBLEM THIS TIME EITHER AND SENT ME AWAY WITH A PHONE #. THEY TOLD ME TO FILE A CASE WITH CHRYSLER. CASE #23728724 FILED I BELIEVE AFTER JULY 7, 2012 EVENT.
CAR SHUT DOWN/POWERED OFF/TURNED OFF ON IT'S OWN, WHILE DRIVING THROUGH PARKING LOT AT ABOUT 25 MPH. LOST POWER STEERING AND POWER BRAKES. DIFFICULT TO CONTROL/HARD TO SAFE VEHICLE: HARD TO TURN, STOP, AND RESTART. CHECK ENGINE LIGHT DID NOT COME ON/NO ODB CODES STORED.
Official recalls
719V018000 · Air Bags:frontal:passenger Side:inflator Module
Jan 15, 2019
Chrysler (FCA US LLC) is recalling certain 2010 Dodge Ram 3500, Ram 4500/5500, 2010-2011 Dodge Dakota, 2010-2014 Dodge Challenger, 2010-2015 Dodge Challenger, Chrysler 300, and 2010-2016 Jeep Wrangler vehicles. Upon deployment of the driver's frontal air bag, excessive internal pressure may cause the inflator to explode.
Consequence & remedy
Consequence: In the event of a crash necessitating deployment of the passenger's frontal air bag, the inflator could explode with metal fragments striking the vehicle occupants potentially resulting in serious injury or death.
Remedy: Owners are advised not to drive their vehicle until the recall repair is complete. Chrysler will notify owners, and dealers will replace the passenger frontal air bag inflator, free of charge. The recall began February 4, 2019. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is V01.
18V021000 · Air Bags:frontal:passenger Side:inflator Module
Jan 9, 2018
Chrysler (FCA US LLC) is recalling certain 2009-2013 Jeep Wrangler, Chrysler 300, Dodge Challenger and Dodge Charger vehicles, and 2009-2011 Dodge Dakota vehicles sold, or ever registered, in the states of Alabama, California, Florida, Georgia, Hawaii, Louisiana, Mississippi, South Carolina, Texas, Puerto Rico, American Samoa, Guam, the Northern Mariana Islands (Saipan), and the U.S. Virgin Islands or "Zone A." Additionally, Chrysler is recalling certain 2009-2010 RAM 4500 Cab Chassis, RAM 5500 Cab Chassis, RAM 3500 Cab Chassis, Jeep Wrangler, Chrysler 300, Dodge Dakota, Dodge Challenger, and Dodge Charger vehicles ever registered in the states of Arizona, Arkansas, Delaware, District of Columbia, Illinois, Indiana, Kansas, Kentucky, Maryland, Missouri, Nebraska, Nevada, New Jersey, New Mexico, North Carolina, Ohio, Oklahoma, Pennsylvania, Tennessee, Virginia, and West Virginia or "Zone B." Chrysler is also recalling certain 2009 RAM 3500, RAM 2500, RAM 4500 Cab Chassis, RAM 5500 Cab Chassis, Dodge Durango, Chrysler Aspen, RAM 3500 Cab Chassis, Jeep Wrangler, Chrysler 300, Dodge Dakota, Dodge Challenger, and Dodge Charger vehicles ever registered in the states of Alaska, Colorado, Connecticut, Idaho, Iowa, Maine, Massachusetts, Michigan, Minnesota, Montana, New Hampshire, New York, North Dakota, Oregon, Rhode Island, South Dakota, Utah, Vermont, Washington, Wisconsin, and Wyoming. In the event of a crash necessitating deployment of the passenger frontal air bag, these passenger air bag inflator may explode due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling.
Consequence & remedy
Consequence: An inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.
Remedy: Owners are advised not to drive their vehicle until the recall repair is complete. Chrysler will notify owners, and dealers will replace the passenger frontal air bag inflator, free of charge. The recall began February 28, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is U03.
16V352000 · Air Bags:frontal:passenger Side:inflator Module
May 24, 2016
Chrysler (FCA US LLC) expanded the affected population to include 73,712 2005-2009 RAM 2500 trucks produced at the St. Louis North Assembly Plant. With this change, Chrysler is recalling certain model year 2004-2008 RAM 1500, 2005-2009 RAM 2500, 2006-2009 RAM 3500, 2007-2010 RAM 3500 Cab Chassis, 2008-2010 RAM 4500 and 5500 Cab Chassis, 2004-2009 Dodge Durango, 2007-2009 Chrysler Aspen, 2007-2012 Jeep Wrangler, 2008-2012 Dodge Challenger, 2005-2008 Dodge Magnum, 2005-2012 Chrysler 300, 2006-2012 Dodge Charger, 2005-2011 Dodge Dakota, and 2006-2009 Mitsubishi Raider vehicles originally sold, or ever registered, in AL, CA, FL, GA, HI, LA, MS, SC, TX, Puerto Rico, American Samoa, Guam, the Northern Mariana Islands (Saipan), and the U.S. Virgin Islands, or "Zone A." Additionally, unless included in "Zone A" above, Chrysler is also recalling 2004-2008 RAM 1500, 2005-2009 RAM 2500, 2006-2009 RAM 3500, 2007-2009 RAM 3500 Cab Chassis, 2008-2009 RAM 4500 and 5500 Cab Chassis, 2004-2009 Dodge Durango, 2007-2009 Chrysler Aspen, 2007-2009 Jeep Wrangler, 2008-2009 Dodge Challenger, 2005-2008 Dodge Magnum, 2005-2009 Chrysler 300, 2006-2009 Dodge Charger, 2005-2009 Dodge Dakota and 2006-2009 Mitsubishi Raider vehicles originally sold, or ever registered, in AZ, AR, DE, Washington D.C., IL, IN, KS, KY, MD, MO, NE, NV, NJ, NM, NC, OH, OK, PA, TN, VA, and WV, or "Zone B." Lastly, unless included in "Zone A" or "Zone B" above, Chrysler is recalling certain 2005-2008 RAM 2500, 2006-2008 RAM 3500, 2007-2008 RAM 3500 Cab Chassis, 2008 RAM 4500 and 5500 Cab Chassis, 2004-2008 Dodge Durango, 2007-2008 Chrysler Aspen, 2007-2008 Jeep Wrangler, 2008 Dodge Challenger, 2005-2008 Dodge Magnum, 2005-2008 Chrysler 300, 2006-2008 Dodge Charger, 2005-2008 Dodge Dakota, and 2006-2008 Mitsubishi Raider vehicles originally sold, or registered, in AK, CO, CT, ID, IA, ME, MA, MI, MN, MT, NH, NY, ND, OR, RI, SD, UT, VT, WA, WI, and WY.
Consequence & remedy
Consequence: These vehicles are equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules, and used as original equipment or replacement equipment. These inflators may rupture due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling. An inflator rupture may result in metal fragments striking the vehicle occupants resulting in serious injury or death.
Remedy: Owners are advised not to drive their vehicle until the recall repair is complete. Chrysler will notify the Chrysler, Dodge, Jeep and RAM owners. Mitsubishi owners will be notified by their company. Dealers will replace the passenger frontal air bag inflator, free of charge. The recall began on March 27, 2017. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is S43. Note: This recall supersedes recall 14V-7700.
15V444000 · Air Bags:frontal:driver Side:inflator Module
Jul 10, 2015
Chrysler (FCA US LLC) is recalling certain model year 2008-2010 Dodge Challenger vehicles manufactured September 19, 2007, to October 29, 2010. The affected vehicles are equipped with a dual-stage driver frontal air bag that may be susceptible to moisture intrusion which, over time, could cause the inflator to rupture.
Consequence & remedy
Consequence: In the event of a crash necessitating deployment of the driver's frontal air bag, the inflator could rupture with metal fragments striking the driver or other occupants resulting in serious injury or death.
Remedy: Owners are advised not to drive their vehicle until the recall repair is complete. Chrysler will notify owners, and dealers will replace the driver's frontal air bag inflator, free of charge. The recall began on November 17, 2015. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is R37.
10V475000 · Steering:electric Power Assist System
Oct 7, 2010
CHRYSLER IS RECALLING CERTAIN MODEL YEAR 2010 CHRYSLER SEBRING, 300, CHARGER (LX) AND DODGE CHALLENGER (LC), AVENGER (JS), AND JOURNEY (JC), AS WELL AS MODEL YEAR 2011 DODGE RAM LIGHT DUTY PICKUP (DS) VEHICLES. SOME OF THESE VEHICLES MAY EXPERIENCE A SEPARATION AT THE CRIMPED END OF THE POWER STEERING PRESSURE HOSE ASSEMBLY.
Consequence & remedy
Consequence: LEAKED POWER STEERING FLUID ONTO HOT ENGINE COMPONENTS COULD CAUSE A FIRE.
Remedy: DEALERS WILL INSPECT AND REPLACE AS NECESSARY THE POWER STEERING PRESSURE HOSES FREE OF CHARGE. THE SAFETY RECALL BEGAN ON DECEMBER 20, 2010. OWNERS MAY CONTACT CHRYSLER AT 1-800-853-1403.
10V200000 · Electrical System:ignition:module
May 11, 2010
CHRYSLER IS RECALLING CERTAIN MODEL YEAR 2010 CHRYSLER 300, DODGE CHALLENGER, CHARGER, JEEP COMMANDER, GRAND CHEROKEE AND DODGE RAM VEHICLES. THESE VEHICLES MAY HAVE BEEN BUILT WITH A WIRELESS IGNITION NODE (WIN) MODULE EXHIBITING A BINDING CONDITION OF THE SOLENOID LATCH.
Consequence & remedy
Consequence: THE RESULT OF THE DEFECT COULD LEAD TO A CONDITION WHERE THE KEY MAY BE REMOVED FROM THE IGNITION SWITCH (WIN MODULE) PRIOR TO PLACING THE SHIFTER IN PARK. THIS COULD RESULT IN THE POTENTIAL FOR UNINTENDED VEHICLE MOVEMENT AND COULD INCREASE THE RISK OF A CRASH.
Remedy: DEALERS WILL INSPECT AND REPLACE THE WIN MODULE FREE OF CHARGE. THE SAFETY RECALL IS EXPECTED TO BEGIN ON OR BEFORE AUGUST 23, 2010. OWNERS MAY CONTACT CHRYSLER AT 1-800-853-1403.
09V420000 · Wheels:lugs/nuts/bolts/studs
Oct 29, 2009
CHRYSLER IS RECALLING CERTAIN MODEL YEAR 2009 THROUGH 2010 PASSENGER VEHICLES EQUIPPED WITH REAR WHEEL DRIVE. THESE VEHICLES MAY HAVE BEEN BUILT WITHOUT A FRONT WHEEL SPINDLE NUT.
Consequence & remedy
Consequence: WHILE DRIVING, A TIRE AND WHEEL SEPARATION COULD OCCUR INCREASING THE RISK OF A CRASH.
Remedy: DEALERS WILL INSPECT THE TIRE AND WHEEL ASSEMBLY AND IF FOUND WITHOUT A SPINDLE NUT IT WILL BE REPAIRED FREE OF CHARGE. THE RECALL BEGAN ON NOVEMBER 2, 2009. OWNERS MAY CONTACT CHRYSLER AT 1-800-835-1403.
Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗
NHTSA investigations
1EA21002 · Desiccated Air Bag Inflator Rupture
Opened Sep 17, 2021 · No close date supplied
Status: open (inferred from source dates) · Air Bags:frontal:driver Side:inflator Module; Air Bags:frontal:passenger Side:inflator Module
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.
Additional source detail variants (2)
Air Bags:frontal:driver Side:inflator Module
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.
Air Bags:frontal:passenger Side:inflator Module
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.