When in gentle right turns, the steering "sticks" at about 1:00 and I have to apply force to remove the steering wheel from that position. It results in oversteering, particularly at higher speeds.
2019 Chrysler Pacifica
Owner reports · Recalls · Investigations
Similar to other model years
Owner complaints for the 2019 Chrysler Pacifica do not stand out strongly from the model-year median of 189.
About this comparison →How this year compares
Owner complaints by model year
Compare all Pacifica years →Counts vary with age, sales and reporting. They are not failure rates.
What owners reported most
All reported categories
Tap a category to read its complaints. One report may name several components.
When problems were reported
Mileage at the reported incident
80 reports with mileage · 230 unknown
NHTSA’s mileage field refers to the reported incident, not necessarily the filing date. This shows report counts, not the likelihood of a failure.
What to inspect
Issues worth paying extra attention to based on owner reports.
- Electrical System. Review the 94 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
- Engine. Review the 81 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
- Power Train. Review the 72 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
NHTSA owner reports · September 18, 2026 snapshot.
Steering complaints
42 reportsThe van has a consistent steering catch when traveling most pronounced at 11 and 1. The steering hangs and then releases which causes the van to travel unexpectedly into the other lane of traffic. There are no faults or other indicators visible with the vehicle to warn the driver of an issue. The issue is more noticeable when th…
Read full complaint
The van has a consistent steering catch when traveling most pronounced at 11 and 1. The steering hangs and then releases which causes the van to travel unexpectedly into the other lane of traffic. There are no faults or other indicators visible with the vehicle to warn the driver of an issue. The issue is more noticeable when the outside air temperature is above 85 deg F and the van has been drive 15 or so miles. Additionally, a visual inspection of all mechanical components of the van related to steering does not show any abnormal wear and tear. The van has 126K miles on it.
The steering sticks normally when slightly turned especially going highway speeds around bends. You have to “yank” the wheel from it being stuck and risk over steering off the road or into other lane. Huge safety risk.
Power steering sticks at highway speed around curves. This problem is worsening and is dangerous. The car has been inspected with repair estimates around $5,000.
I am experiencing an intermittent steering problem with my 2019 Chrysler Pacifica Limited. While driving, particularly when making slight turns or small steering corrections, the steering wheel sometimes feels as though it sticks or binds in the turned position instead of smoothly returning toward center. When this occurs, I ha…
Read full complaint
I am experiencing an intermittent steering problem with my 2019 Chrysler Pacifica Limited. While driving, particularly when making slight turns or small steering corrections, the steering wheel sometimes feels as though it sticks or binds in the turned position instead of smoothly returning toward center. When this occurs, I have to apply additional force to the steering wheel to correct the vehicle’s direction. Once enough force is applied, the steering releases and moves, which can cause the vehicle to correct more abruptly than intended. This occurs at both lower and higher driving speeds and is especially noticeable during gradual turns and small steering corrections near the center position. The problem creates a safety concern because the vehicle can continue traveling in the direction of the slight turn until I deliberately apply additional steering force. This makes maintaining the intended direction of travel less predictable. There are currently no power-steering or other steering-related warning lights displayed on the dashboard. When the vehicle is stationary with the engine running, the steering wheel turns smoothly and I have not been able to reproduce the sticking sensation. The problem occurs while the vehicle is being driven. I took the vehicle to an authorized Chrysler dealership and reported the steering concern. The dealership test-drove the vehicle but stated that they could not reproduce the problem and considered the steering behavior normal. However, the problem continues to occur during normal driving. I have also been able to record video demonstrating the steering behavior. The vehicle remains available for further inspection. The exact component causing the problem is UNKNOWN. I am reporting the issue because the intermittent resistance in the steering and the additional force required to correct the vehicle’s direction could create a loss-of-control risk if the condition worsens or occurs unexpectedly during a turn.
The steering "sticks" on either right or left hand curves (more left than right) under normal driving circumstances on paved roads. This causes a "jerk" when returning the wheel to center, after or as the vehicle is coming out of the curve. Definitely concerning. Noticed shortly after we purchased the van with 100,000 miles on t…
Read full complaint
The steering "sticks" on either right or left hand curves (more left than right) under normal driving circumstances on paved roads. This causes a "jerk" when returning the wheel to center, after or as the vehicle is coming out of the curve. Definitely concerning. Noticed shortly after we purchased the van with 100,000 miles on the odometer.
Powertrain: harsh, jerky shifting, violent, lurching gear changes, pause before engaging and high revving and lack of acceleration, mostly noticed at 50-60mph Steering PE25009 - catching or sticking when making minor or gradual turns in either direction when the steering wheel is positioned near the 11 o'clock or 1 o'clock posi…
Read full complaint
Powertrain: harsh, jerky shifting, violent, lurching gear changes, pause before engaging and high revving and lack of acceleration, mostly noticed at 50-60mph Steering PE25009 - catching or sticking when making minor or gradual turns in either direction when the steering wheel is positioned near the 11 o'clock or 1 o'clock positions. It requires extra force to break free and jerks the steering
When driving around curves the electric steering is malfunctioning. Making it unsafe to drive almost like it is sticking then when you correct it, it frees up and over corrects. This has been going on for some time now and keeps getting worse and worse. After a little research it seems a lot of other people are having this probl…
Read full complaint
When driving around curves the electric steering is malfunctioning. Making it unsafe to drive almost like it is sticking then when you correct it, it frees up and over corrects. This has been going on for some time now and keeps getting worse and worse. After a little research it seems a lot of other people are having this problem
2019 Chrysler Pacifica. The vehicle has ongoing steering, electrical, and power steering/EPS failures. The steering wheel intermittently jerks/pulls while driving, the vehicle has experienced random loss of steering assist, and the electrical system cuts out or malfunctions during normal use. The steering wheel lights and backup…
Read full complaint
2019 Chrysler Pacifica. The vehicle has ongoing steering, electrical, and power steering/EPS failures. The steering wheel intermittently jerks/pulls while driving, the vehicle has experienced random loss of steering assist, and the electrical system cuts out or malfunctions during normal use. The steering wheel lights and backup camera guidelines also disappear during driving sessions and only return after fully restarting the vehicle. The exact root cause is UNKNOWN, but the affected systems appear to include the EPS/power steering system, steering/suspension components, battery/electrical system, and possibly related control modules. My safety and others’ safety were put at risk because the vehicle has lost steering assist and had electrical failure while being driven, including a prior failure in an intersection. When the steering assist drops or the wheel jerks, the vehicle becomes difficult to control. This is especially dangerous because I transport my family in this vehicle. The issue has been reported repeatedly since purchase. The vehicle was inspected/repaired through Carvana/SilverRock’s repair process at Brockman Automotive, including rack and pinion/steering-related work. After that repair, the vehicle continued to drift and handle improperly. A later independent inspection at Davidson Automotive identified a loose/not properly secured tie rod, alignment problems, and a failed auxiliary battery. The shop could not complete deeper diagnostics until those prerequisite issues were corrected. The vehicle has also suffered abnormal front tire wear after the steering/alignment problems. Warning/symptoms before or during failures include steering wheel jerking/pulling, clunking/clanking/grinding/groaning noises, vehicle drift, service start/stop warning, electrical malfunctions, intermittent steering wheel control/light issues, loss of backup camera guidelines, and loss of steering assist. The vehicle/component is available for inspection upon request.
The steering is tight/sticking when I back out of my driveway or drive slowly around turns. It does seem stiff on highway speeds as well. Also my auto stop start check light is on about 2 months after replacing both batteries and I did have the recall somewhat associated with this completed
Official recalls
726V327000 · Back Over Prevention: Sensing System: Camera
May 21, 2026
Chrysler (FCA US, LLC) is recalling certain 2019 and 2023 Chrysler Pacifica, 2024 Ram 1500, Ram 2500, and 2024-2025 Jeep Wrangler vehicles. Contamination in the central vision processing module or improper programming may cause the rearview camera image not to display. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 111, "Rear Visibility."
Consequence & remedy
Consequence: A rearview image that does not display reduces the driver's view behind the vehicle, increasing the risk of a crash.
Remedy: Dealers will update the central vision processing module software or replace the module, as necessary, free of charge. Owner notification letters are expected to be mailed beginning July 16, 2026. Owners may contact Chrysler customer service at 800-853-1403. Chrysler's number for this recall is 46D. Vehicle Identification Numbers (VINs) involved in this recall will be searchable on NHTSA.gov on May 28, 2026.
25V876000 · Equipment Adaptive/mobility:wheelchair Restraints/securement:latch/anchor:
Dec 17, 2025
Rollx Vans (Rollx) is recalling certain GMC Yukon, Sierra, Chevrolet Express 2500, Ford Transit, E-250, Toyota Sienna, Sienna Hybrid, Honda Odyssey, Chrysler Town and Country, Voyager, Pacifica, Dodge Grand Caravan, and Ram Promaster vehicles equipped with QRT-Deluxe and QRT-Max wheelchair restraints. Please refer to Rollx's recall report for specific model year information. The retractors may not lock, preventing the wheelchair from being properly secured.
Consequence & remedy
Consequence: An unsecured wheelchair can move during transit, increasing the risk of injury.
Remedy: Rollx will work with Q'Straint to inspect and replace the retractors as necessary, free of charge. Owner notification letters were mailed February 5, 2026. Owners may contact Rollx's customer service at 1-800-956-6668.
23V010000 · Electrical System:wiring:connectors/plugs/receptacles; Hybrid Propulsion System: Inverter
Jan 17, 2023
Chrysler (FCA US, LLC) is recalling certain 2017-2023 Pacifica Plug-In Hybrid Electric vehicles (PHEVs). An internal transmission wiring connector may short circuit, resulting in an unexpected engine shutdown.
Consequence & remedy
Consequence: An unexpected engine shutdown can cause a loss of drive power, increasing the risk of a crash.
Remedy: Dealers will update the Power Inverter Module (PIM) software and, if necessary, update the instrument panel cluster (IPC) and the electronic control module (ECM) software, free of charge. FCA US will notify dealers and begin notifying owners on or about: 03/21/2023 for 2021 model year vehicles, 05/02/2023 for 2019-2020 model year vehicles, and 06/15/2023 for 2017-2018 model year vehicles. FCA began notifying owners on February 23, 2023. Owners may contact FCA US, LLC customer service at 1-800-853-1403. FCA US, LLC's number for this recall is 03A.
Additional source detail variants (2)
Electrical System:wiring:connectors/plugs/receptacles
Chrysler (FCA US, LLC) is recalling certain 2017-2023 Pacifica Plug-In Hybrid Electric vehicles (PHEVs). An internal transmission wiring connector may short circuit, resulting in an unexpected engine shutdown.
Consequence: An unexpected engine shutdown can cause a loss of drive power, increasing the risk of a crash.
Remedy: Dealers will update the Power Inverter Module (PIM) software and, if necessary, update the instrument panel cluster (IPC) and the electronic control module (ECM) software, free of charge. FCA US will notify dealers and begin notifying owners on or about: 03/21/2023 for 2021 model year vehicles, 05/02/2023 for 2019-2020 model year vehicles, and 06/15/2023 for 2017-2018 model year vehicles. FCA began notifying owners on February 23, 2023. Owners may contact FCA US, LLC customer service at 1-800-853-1403. FCA US, LLC's number for this recall is 03A.
Hybrid Propulsion System: Inverter
Chrysler (FCA US, LLC) is recalling certain 2017-2023 Pacifica Plug-In Hybrid Electric vehicles (PHEVs). An internal transmission wiring connector may short circuit, resulting in an unexpected engine shutdown.
Consequence: An unexpected engine shutdown can cause a loss of drive power, increasing the risk of a crash.
Remedy: Dealers will update the Power Inverter Module (PIM) software and, if necessary, update the instrument panel cluster (IPC) and the electronic control module (ECM) software, free of charge. FCA US will notify dealers and begin notifying owners on or about: 03/21/2023 for 2021 model year vehicles, 05/02/2023 for 2019-2020 model year vehicles, and 06/15/2023 for 2017-2018 model year vehicles. FCA began notifying owners on February 23, 2023. Owners may contact FCA US, LLC customer service at 1-800-853-1403. FCA US, LLC's number for this recall is 03A.
20V191000 · Back Over Prevention: Sensing System: Camera
Sep 10, 2020
Chrysler (FCA US LLC) is recalling certain 2020 Jeep Gladiator and Jeep Cherokee, 2019-2020 Ram 1500 Pickup, Ram 2500 Pickup, Ram 3500 Pickup, Chrysler Pacifica, Dodge Durango, Jeep Grand Cherokee, Jeep Wrangler, and Jeep Renegade and 2019 Dodge Challenger vehicles equipped with 8.4" or 12" radio displays. A software error can cause the rearview camera image to remain displayed after the vehicle has been shifted out of reverse. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 111, "Rearview Mirrors."
Consequence & remedy
Consequence: The lingering rearview image can distract the driver, increasing the risk of a crash.
Remedy: Chrysler has notified owners, and dealers will update the radio display software, free of charge. Optionally, owners can choose to remotely update their software via an Over-The-Air (OTA) update available as of May 1, 2020. The recall began April 27, 2020. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is W30-W37.
19V886000 · Back Over Prevention: Sensing System: Camera; Equipment:electrical:radio/tape Deck/cd Etc.
Dec 12, 2019
Chrysler (FCA US LLC) is recalling certain 2018-2019 Pacifica vehicles equipped with an 8.4 inch radio display, 360 degree surround view camera system, and seat back video screens. A software error can cause the rearview camera image to remain displayed on the radio after the vehicle has been shifted out of reverse. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 111, "Rearview Mirrors."
Consequence & remedy
Consequence: The lingering rearview image can distract the driver, increasing the risk of a crash.
Remedy: Chrysler will notify owners, and dealers will update the radio software, free of charge. The recall began January 9, 2020. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is VE2.
Additional source detail variants (2)
Back Over Prevention: Sensing System: Camera
Chrysler (FCA US LLC) is recalling certain 2018-2019 Pacifica vehicles equipped with an 8.4 inch radio display, 360 degree surround view camera system, and seat back video screens. A software error can cause the rearview camera image to remain displayed on the radio after the vehicle has been shifted out of reverse. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 111, "Rearview Mirrors."
Consequence: The lingering rearview image can distract the driver, increasing the risk of a crash.
Remedy: Chrysler will notify owners, and dealers will update the radio software, free of charge. The recall began January 9, 2020. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is VE2.
Equipment:electrical:radio/tape Deck/cd Etc.
Chrysler (FCA US LLC) is recalling certain 2018-2019 Pacifica vehicles equipped with an 8.4 inch radio display, 360 degree surround view camera system, and seat back video screens. A software error can cause the rearview camera image to remain displayed on the radio after the vehicle has been shifted out of reverse. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 111, "Rearview Mirrors."
Consequence: The lingering rearview image can distract the driver, increasing the risk of a crash.
Remedy: Chrysler will notify owners, and dealers will update the radio software, free of charge. The recall began January 9, 2020. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is VE2.
19V348000 · Electrical SYSTEM:12V/24V/48V Battery
May 9, 2019
Chrysler (FCA US LLC) is recalling certain 2017-2019 Pacifica vehicles equipped with engine stop/start systems. A loose battery ground connection may result in an intermittent loss of power steering assist and/or a stall.
Consequence & remedy
Consequence: A loss of power steering assist or a stall can increase the risk of crash.
Remedy: Chrysler will notify owners, and dealers will inspect the battery ground surfaces, clean the contact surfaces as needed, and properly reassemble the ground connection, free of charge. The recall began May 24, 2019. Owners may contact Chrysler customer service at 1-800-853-1403. FCA US' number for this recall is V53.
18V524000 · Electrical System:wiring:front Underhood
Aug 9, 2018
Chrysler (FCA US LLC) is recalling certain 2018 Jeep Renegade, Compass and Grand Cherokee, RAM 1500 and Promaster, Fiat 500x, Dodge Journey, Challenger, Charger and Durango and Chrysler 300x vehicles, 2017-2018 Jeep Wrangler, Dodge Grand Caravan and Chrysler Town and Country vehicles and 2018-2019 Jeep Cherokee and 2018 Chrysler Pacifica and Pacifica Hybrid vehicles. The powertrain control module may be equipped with a voltage regulator chip in the circuit board that may fail, causing a stall or a no start condition.
Consequence & remedy
Consequence: A vehicle stall can increase the risk of a crash.
Remedy: Chrysler will notify owners, and dealers will replace the powertrain control module, free of charge. The recall began October 2, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is U87.
Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗
NHTSA investigations
2RQ24004 · Loss Of Motive Power Due To An Internal Wiring Connector Short.
Opened Feb 27, 2024 · No close date supplied
Status: open (inferred from source dates) · Electrical System:wiring
On July 22, 2022, the Office of Defects Investigation (ODI) opened investigation PE22-008 regarding complaints alleging a loss of motive power condition potentially due to a transmission malfunction in Model Years 2019-2021 Chrysler Pacifica Plug-In Hybrid Electric Vehicles (PHEV). On January 17, 2023, Fiat Chrysler Automobiles (FCA) issued safety recall (NHTSA Recall 23V-010) involving 2017-2023 Model Years (MY) Pacifica Plug-In Hybrid Electric Vehicles (PHEV) produced between August 12, 2016, through January 9, 2023. The recall states that the loss of motive power condition in these vehicles is caused by an internal transmission wiring connector that may short circuit, resulting in an unexpected engine shutdown. An unexpected engine shutdown can cause a loss of drive power, increasing the risk of a crash. In discussions with FCA on Recall 23V-010, ODI confirmed the recall was related to investigation PE22-008. The remedy for 23V-010 is to update the Power Inverter module (PIM) and/or Instrument Panel Cluster (IPC) software to provide drivers a message stating “Stop Safely - Vehicle Will Shut Off Soon” followed by a chime and MIL, PRNDL blinking (on cluster and shifter knob), low SOC (State of Charge) warning and reduced power mode. The recall remedy does not replace the defective hardware that was described in Recall 23V-010, and the wiring connector short still exists on these vehicles. To date, ODI has received 132 reports for the population of vehicles subject to recall 23V-010. These reports allege a loss of motive power condition that reduces the vehicles speed, followed by dashboard warning lamps displaying messages associated with recall 23V-010. The presence of these warning lamps and messages indicates the vehicle likely had the recall remedy applied. Follow up discussions with FCA confirm their remedy does not prevent a loss of motive power, but instead limits torque to the engine and after an unspecified number of miles or period of time, the engine will shut down. When this occurs, FCA relies on the owner to transport the vehicle to a dealership after they experience a loss of motive power condition, at which time the defective hardware is replaced. Furthermore, the dashboard messages introduced in the recall remedy may cause the driver to pull over in an unsafe location. Pulling over in an unsafe location may expose the occupants to undue harm. The Office of Defects Investigation is opening this Recall Query (RQ) to assess the adequacy, frequency, and safety consequence of the remedy for recall 23V-010. To review the ODI reports cited in the opening resume ODI report identification number document, go to NHTSA.gov.
PE22008 · Transmission Fault Leading To Loss Of Motive Power
Opened Jul 22, 2022 · Closed Mar 27, 2024
Status: closed (inferred from source dates) · Power Train
On July 22, 2022, the Office of Defects Investigation (ODI) opened PE22008 to investigate allegation of loss of motive power, potentially due to transmission malfunction, in certain Chrysler Pacifica vehicles. In a January 17, 2023 letter to NHTSA, Fiat Chrysler Automobiles (FCA) submitted recall notice 23V-010 involving a transmission motor wiring defect in 67,118 model year (MY) 2017-2023 Chrysler Pacifica plug-in hybrid electric vehicles (PHEVs) manufactured from August 12, 2016 through January 9, 2023. FCA determined that an internal transmission connector short could result in an unexpected engine shutdown under certain conditions. Follow up correspondence with FCA confirmed this defect results in an electric motor position trouble code that was the basis for opening PE22008, therefore NHTSA is closing this investigation. The 23V-010 recall remedy is a software update to address the hardware failure associated with PE22008. When a hardware failure is detected, the vehicle limits motive power while instructing the driver to pull over to a safe location. NHTSA is concerned that drivers will pull over to an unsafe location when the warning message associated with the recall remedy displays on the dashboard. Due to the nature of the recall remedy and related reports, NHTSA has opened Recall Query RQ24004 to assess the recall remedy. The reports and failure report summary values included with this closing action are related to allegations of Recall 23V-010 remedy inadequacy. The Agency reserves the right to take additional action if warranted by future circumstances. To review the ODI reports cited in the Closing Resume ODI Report Identification Number document, go to NHTSA.gov.
Illustration