2020 Chevrolet Equinox

I bought the 2020 equinox May the 9th 2026 the dealership concealed a lot of things going on this vehicle and I complain to them two days after purchase he told me I was stuck with it in the meanwhile as I drive the vehicle I have had repairs done but it's something going on with the acceleration it accelerates on its own sometimes and slow to pick up speed. The steering seems to get away from me at times that makes me feel like I'm going to lose control when driving. I have almost had a couple of accidents since then so what really worries me is the steering problems which I just had a little alignment done today July 15th 2026 and the accelerating from time to time went backing up or pulling off. I do feel like the safety of others can be at risk for should I say my safety is that risk at times so I am extremely cautious when I'm driving. No I have not had really anyone to look at I have been having a car looked at for many issues but that issue I am still trying to get in to see a mechanic that I'm used to dealing with but he's been backed up. No there are no lights of any such but when I purchased it the sensors in the tires and I've had that replaced and I've noticed this situation with the acceleration when I bought the vehicle and the slow speed pick up when driving.

The sunroof opens and closes without driver input. It initially occurred at startup but now also while driving (safety/security risk) . The sunroof switch has currently been unresponsive since 2025 . The issue is intermittent and has occurred multiple times. I have a pending diagnostic appointment and an open chevrolet customer assistance case. **My 2020 Equinox has approximately 55,000 - 60,000 miles on it and I'm also not certain if I have any warranty left that will cover the cost for this issue. Thank you in advance for your assistance with this matter.

The vehicle was taken to College Chevrolet for body work. . When the vehicle was at the body shop, the shop informed me that a turbo light was on but I am unsure when it appeared because it wasn't on when I took it to the dealer. The brake assist light was on; I noticed this about May 20, 2026. I parked the vehicle. The vehicle was driven to the body shop on June 1. The body work was completed on June 9 and the vehicle was at my residence. My Ex-husband and son were coming to pick me up at the car rental. The car caught on fire. My son & Ex-husband could have died in that car. The vehicle is available for inspection. The vehicle hasn't been examined by anyone at this time. An insurance claim in in process.

My engine started running rough and, as a result of a repeating PO301 code, the car was towed to Lester Glenn of Toms River. Their diagnostic scan report (codes DTC PO301 & DTC PO303) found the engine assembly has scored cylinder walls due to failed piston rings. The entire engine had to be replaced. The odometer reading was 19,000 miles. Piston rings are designed to last 150,000 plus miles. For them to be worn enough to score a cylinder wall at 19,000 miles is a textbook definition of a manufacturing defect. Piston failure represents a serious safety defect as it could have caused a total loss of power at highway speeds. This was a safety-related manufacturing flaw, and not a maintenance issue. GM refused to pay for the repair bill in full.

I was driving to work, when I got off the exit I stopped at Sheetz. When I got back in the car my brake pedal was stiff as a rock, and there was oil on the ground. A friend of mine does mechanic work so I called him and he said it sounds like the vacuum pump. I had the car towed to his garage, the tow costed me $400 which was very cheap considering where I was located. When I got it to the garage he confirmed that it was the vacuum pump and we removed several pieces of metal from inside the engine. I now have my car at the Chevy dealership in Chippewa PA. They told me to be $180 a diagnose it, well they just called me a little bit ago and said it's going to be another $900 to take everything apart and to truly diagnose it. I'm finding out now that GM has known about the failing vacuum pumps and they kept producing them anyways. I see there's a class action lawsuit taking place, and I am not very happy. My life was put at risk. And now I'm expected to be stuck paying this huge bill?

I would like to formally file a safety complaint regarding my Chevrolet vehicle and to express concern over Chevrolet’s handling of a known defect. On January 22, while driving to work in cold weather conditions, my vehicle experienced a sudden and dangerous malfunction. The engine unexpectedly revved to approximately 4,500 RPM, the check engine light illuminated, and the dashboard displayed an “Engine Power Reduced” message. Despite removing my foot from the accelerator, the vehicle did not slow down as expected. I was able to pull over to the side of the road and bring the vehicle to a stop. I immediately contacted my local Chevrolet service department and was advised to bring the vehicle in six days later, the following Friday. Due to the safety risk, we did not use the vehicle during this time out of concern for a potential accident. When the vehicle was inspected by the Chevrolet dealership, we were informed that Chevrolet had identified this issue as being related to cold weather operation and that a custom shield had been designed to address the problem. We were also told that Chevrolet vehicles were not adequately designed for cold weather conditions, which led to this failure. Despite this acknowledgment and the fact that Chevrolet has engineered a corrective part, we were informed that the repair—costing approximately $1,600—is not covered under our extended warranty, as the shield was not installed on the vehicle at the time of purchase. The vehicle remains unsafe to drive. When accelerating, engine RPMs surge from approximately 2,500 to 4,000 RPM, and the vehicle can suddenly decelerate, creating a serious risk of rear-end collisions if a following driver is forced to brake abruptly. This issue represents a significant safety hazard. Chevrolet has acknowledged the defect by creating a corrective part, yet is declining to cover the repair cost, leaving the responsibility with the customer for a known design issue. Please let me know my next step