2019 Chevrolet Equinox

The contact owns a 2019 Chevrolet Equinox. The contact stated that while driving at an undisclosed speed, the vehicle inadvertently lost motive power. The contact was able to pull over to the shoulder of the roadway, where the failure persisted. The check engine warning light was illuminated. The vehicle was towed to the dealer, who diagnosed a failure with the camshaft, resulting in damage to the engine. The contact was informed that the engine needed to be replaced. The vehicle was not repaired. The manufacturer was notified of the failure, a case was opened, and the contact was referred to the NHTSA Hotline for assistance. The failure mileage was 72,000.

I had an issue starting the vehicle. Once it started the check engine light was lit. I stopped at the nearest Autozone for a diagnostic check and the code P00C6 registered for Fuel Pump. I had the vehicle checked by a mechanic and he explained to me this vehicle has (2) fuel pumps. One in the fuel tank and one on the engine, which is considered a high pressure fuel pump. That is where the failure is and the pump requires special tools to install. It is something they can not do and recommend the vehicle go to the dealer. Thank you for taking time to read this & be well.

The contact owns a 2019 Chevrolet Equinox. The contact stated that while depressing the brake pedal, there was an abnormal grinding sound coming from the rear brakes. There was no warning light illuminated. The contact had taken the vehicle to an independent mechanic who diagnosed the vehicle and determined that the rear brake pads and rotors needed to be replaced. The contact completed the work himself. The contact recently took the vehicle the vehicle in for service at a dealer and was informed that the rear brakes and calipers would need to be replaced soon. The contact stated that the pads and rotors had been replaced approximately one year ago, and the vehicle was not driven daily. The vehicle was not repaired. The contact researched online and related the failure to NHTSA Campaign Number: 18V576000 (Service Brakes, Hydraulic); however, the VIN was not included in the recall. The manufacturer was not informed of the failure. The failure mileage was approximately 50,000.

The contact owns a 2019 Chevrolet Equinox. The contact stated that while driving at an undisclosed speed, the contact noticed an abnormally loud sound. The accelerator pedal was depressed; however, the vehicle failed to accelerate as intended. The contact stated that the vehicle failed to exceed 12 MPH. No warning light was illuminated. The vehicle was taken to the nearest mechanic, which was a Toyota dealer. The vehicle was diagnosed with a failed throttle body and a failed air cooler outlet tube. The contact was informed that the throttle body and the air outlet tube needed to be replaced. The vehicle was repaired. The manufacturer was made aware of the failure but provided no assistance. The failure mileage was approximately 52,827.

The contact owns a 2019 Chevrolet Equinox. The contact stated that while driving at a slow speed, the brake pedal was depressed, and the brake pedal was extremely hard and tight. No warning lights were illuminated. The contact was able to stop the vehicle because the vehicle was not being driven at a high speed. The vehicle was taken to the dealer where the failure was diagnosed as CAM shaft failure, timing chain, and vacuum pump failure. The contact was informed that the CAM shaft, timing chain, and vacuum pump needed to be replaced. The vehicle was repaired. In addition, the contact, who was an independent mechanic, stated that it was very important that the braking system operated independently. The manufacturer was made aware of the failure, and a case was filed. The contact was informed that the repair was not covered under recall. The failure mileage was approximately 75,400.

Problem persists since 4/3/2025. While parked, the Driver’s Seat was leaned back. About 1 hour later, I couldn’t let it back up. Drove home slowly after 11p. Took to a Repair Shop next day to have the Driver’s Seat fixed. I paid for a Diagnostic & was told that the seat could not be repaired because GMC was no longer manufacturing the seat motor needed. The shop spoke to GMC & a Dealership. I called GMC the next day to complain & verify because car was only 2019 - parts are to be manufactured & made available for minimum of 10yrs! Over next 3 -6 months I spoke to numerous Customer Service employees & Supervisors. I was referred to a Certified Chevrolet Dealer, Dave Gil Chevrolet. I had to use a Large Wedge Pillow & Bed Pillow since the seat was flat back. My car was UNSAFE, difficult to drive & caused concern on whether the seat belts & Air Bags would work properly in the event of an accident or collision. The certified Dealership said that of the 3 motors in the seat, they could get the front one in 2weeks to 3months but not the motor for the rest of the seat. These are the part #’s unsure which is which: 1352-6511 & 1352-5388. I emailed & sent Certified Letter to GMC’s CEO. No response to my email but someone acknowledged my letter. All I ever wanted was my 2019 Equinox repaired properly. Note: Car payment, Insurance, Registration were still expected to be paid & they were by me. I was given a Customer Loyalty Certificate smaller than what I was quoted but not for a new Equinox, for a 2025 Trax which is much smaller! I was told my Equinox couldn’t be repaired, sizable bal due ( I had only purchased 2 yrs prior.) In June 2025 I was mailed a copy of the “California Repurchase Agreement” that GMC was adopting. ( see attached). I sent Certified Letters to that Dept but got no responses. I then escalated to the OH Attorney General’s Consumer Fraud Department & someone called me back. I shared the part #’s but several days have passed - no response. Con’tl