IllustrationSEAT BELT ON DRIVERS SIDE STUCK IN RETRACTED POSITION WHILE PARKED IN LOCKED GARAGE
1984 Chevrolet Corvette
Owner reports · Recalls · Investigations
Limited comparison data
There is not enough comparable history to draw a useful model-year comparison.
About this comparison →How this year compares
Owner complaints by model year
Compare all Corvette years →Counts vary with age, sales and reporting. They are not failure rates.
What owners reported most
All reported categories
Tap a category to read its complaints. One report may name several components.
When problems were reported
Mileage at the reported incident
Limited mileage data: 4 of 14 reports include usable mileage. There isn’t enough coverage to show a useful chart.
NHTSA’s mileage field refers to the reported incident, not necessarily the filing date. This shows report counts, not the likelihood of a failure.
What to inspect
Issues worth paying extra attention to based on owner reports.
- Seat Belts. Review the 8 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
- Vehicle Speed Control. Review the 2 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
- Electrical System. Review the 1 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
NHTSA owner reports · September 18, 2026 snapshot.
1 crash reports0 fire reports0 injury reports
What owners actually said
14 reportsTL* THE CONTACT OWNS A 1984 CHEVROLET CORVETTE. THE CONTACT STATED THAT THE SEAT BELTS WERE STUCK IN THE MECHANISM. WHEN LOCKING THE SEAT BELTS INTO THE LATCH, THEY WOULD LOCK AND FAIL TO UNLOOSEN. THE VEHICLE WAS TAKEN TO DYER CHEVROLET (1000 US HIGHWAY 1, VERO BEACH, FL 32960, 772-208-9152), BUT WAS NOT DIAGNOSED OR REPAIRED. …
Read full complaint
TL* THE CONTACT OWNS A 1984 CHEVROLET CORVETTE. THE CONTACT STATED THAT THE SEAT BELTS WERE STUCK IN THE MECHANISM. WHEN LOCKING THE SEAT BELTS INTO THE LATCH, THEY WOULD LOCK AND FAIL TO UNLOOSEN. THE VEHICLE WAS TAKEN TO DYER CHEVROLET (1000 US HIGHWAY 1, VERO BEACH, FL 32960, 772-208-9152), BUT WAS NOT DIAGNOSED OR REPAIRED. THE MANUFACTURER WAS NOT NOTIFIED. THE FAILURE MILEAGE WAS 172,000. THE VIN WAS UNKNOWN.
AS I WAS DRIVING DOWN A CITY STREET, MY CAR DIED CAUSING THE POWER STEERING TO GO OUT & I ALMOST HIT A PARKED CARCAR WOULD NOT RESTART, HAD TO BE JUMPED OFF.
I HAVE A 1984 CHEVY CORVETTE THAT HAS THE PASSENGER SEAT BELT RETRACTOR JAMMED. I FOUND THE RECALL IN YOUR DATABASE (91V143 CAMPAIGN #91C26). I SPOKE WITH MY DEALER AND HE TOLD ME THAT THEY DON'T SERVICE RECALLS OVER 10 YEARS OLD AND CAN'T GET THE PART ANYWAY. I CALLED THE 1-800-222-1020 GM NUMBER AND WAS TOLD THAT THEY DON'…
Read full complaint
I HAVE A 1984 CHEVY CORVETTE THAT HAS THE PASSENGER SEAT BELT RETRACTOR JAMMED. I FOUND THE RECALL IN YOUR DATABASE (91V143 CAMPAIGN #91C26). I SPOKE WITH MY DEALER AND HE TOLD ME THAT THEY DON'T SERVICE RECALLS OVER 10 YEARS OLD AND CAN'T GET THE PART ANYWAY. I CALLED THE 1-800-222-1020 GM NUMBER AND WAS TOLD THAT THEY DON'T HAVE INFO FOR CARS OVER 10 YEARS OLD, SO THEY HAVE NO WAY TO VERIFY IF THIS IS OPEN FOR ME. MY VIN NUMBER IS CLEARLY WITHIN THE BREAKPOINTS AND I AM HAVING THIS ISSUE. I THOUGHT THAT GM HAD TO HONOR SAFETY RECALLS AND THEY DIDN'T EXPIRE EVER. NOW MY PASSENGER HAS NO WORKING SEATBELT. *TR
DRIVER'S SIDE SEAT BELT WAS LOCKED. RECALL 91V143000, THIS VEHICLE WAS NOT INCLUDED IN THE REC ALL DUE TO VIN. *AK AS A RESULT THE CONSUMER WAS UNABLE TO PULL THE SEATBELT OUT AND USE IT WHILE DRIVING. THE CONSUMER HAD THE SEAT BELT REPLACED AND THEN THE RECALL CAME OUT. *TC
DRIVER'S SHOULDER/LAP BELT LOCKED UP FOR ABOUT THIRTY MINUTES WITH CAUSE UNKNOWN. THE OWNER FOUND A TECHNICAL SERVICE BULLETIN FOR THE SHOULDER BELT AND CONTACTED THE MANUFACTURER. THEY HAVE DECLINED ANY RESPONSIBILITY DUE TO THE AGE OF THE VEHICLE. PLEASE DESCRIBE DETAILS. MR
DRIVER'S SEAT BELT RETRACTOR STUCK, MAKING IT IMPOSSIBLE TO USE SEAT BELT. DEALER HAS SEEN VEHICLE. *AK
GM REFUSES TO PERFORM FACTORY SAFETY RECALL 85V029 ON OF THE CRUISE CONTROL VACUUM SOLENOID VALVES BECAUSE THEY ONLY MAINTAIN A COMPUTER BASE FOR FACTORY RECALLS TO 1988. NLM
NO SUMMARY LISTED FOR ABOVE VEHICLE. *AK
THIS IS REGARDING A RECALL ISSUED BY CHEVROLET - 91C25 AND 91C26 - FOR THE FAILURE OF THE SEAT BELT/RETRACTOR MECHANISM. THE RECALL WAS ISSUED IN 1991, AND I HAVE BEEN TRYING TO GET MY CAR FIXED SINCE THE DATE OF FAILURE WHICH WAS IN 92 OR 93. THE RECALL IS IN YOUR ARCHIVES AS NHTSA CAMPAIGN 91V143000. EACH TIME I TRY TO HAVE TH…
Read full complaint
THIS IS REGARDING A RECALL ISSUED BY CHEVROLET - 91C25 AND 91C26 - FOR THE FAILURE OF THE SEAT BELT/RETRACTOR MECHANISM. THE RECALL WAS ISSUED IN 1991, AND I HAVE BEEN TRYING TO GET MY CAR FIXED SINCE THE DATE OF FAILURE WHICH WAS IN 92 OR 93. THE RECALL IS IN YOUR ARCHIVES AS NHTSA CAMPAIGN 91V143000. EACH TIME I TRY TO HAVE THIS CORRECTED BY A CHEVROLET DEALER, I AM TOLD THEY WILL HAVE TO ORDER THE PARTS AND WILL CONTACT ME WHEN THEY ARRIVE, THEN I NEVER HEAR FROM THEM AGAIN. UPON THE MOST RECENT OCCURANCE OF THIS CYCLE, I CALLED CHEVROLET CUSTOMER ASSISTANCE. I WAS EVENTUALLY TOLD BY A SUPERVISOR THAT CHEVROLET WOULD NOT CORRECT THIS PROBLEM, EVEN THOUGH THE RECALL NOTICE SAYS "IF EITHER SAFETY BELT IN YOUR CORVETTE IS CURRENTLY LOCKED-UP - OR EVER LOCKS-UP IN THE FUTURE - WE WILL REPLACE THE SAFETY BELTS AT NO CHARGE". THIS IS RECORDED BY CHEVROLET CUSTOMER ASSISTANCE AS CASE NUMBER 990326932. I AM ASTONISHED THAT CHEVROLET CAN CLAIM THAT THEY DO NOT HAVE TO REPAIR A KNOWN SAFETY DEFECT WHEN THEIR RECALL NOTICE STATES THAT THEY WILL "CURRENTLY ... OR EVER ... IN THE FUTURE". *AK
Official recalls
591V143000 · Seat Belts:front:anchorage
Sep 4, 1991
UNDER CERTAIN VEHICLE OPERATIONS AND OCCUPANT USAGE CONDITIONS, THE SAFETY BELTS CAN LOCKUP OR JAM IN THE SAFETY BELT RETRACTOR.
Consequence & remedy
Consequence: IF LOCKUP OCCURS, IT IS IMPOSSIBLE TO PULL BELT OUT OFTHE RETRACTOR. THE OCCUPANT OF A SEAT WITH AN UNUSABLE SAFETY BELT ISSUBJECT TO INCREASED RISK OF INJURY OR DEATH IN THE EVENT OF A SUDDEN STOP ORACCIDENT.
Remedy: REPLACE THE SAFETY BELTS IF THE LOCKUP OCCURS.
85V118000 · Power Train:driveline:differential Unit
Oct 1, 1985
CARS MAY LOSE THE WIRE SNAP RINGS THAT HOLD THE DIFFERENTIAL CROSS SHAFT IN POSITION IN THE REAR AXLE DIFFERENTIAL CASE ASSEMBLY, ALLOWING THE SHAFT TO MOVE. CONSEQUENCE OF DEFECT: THE CROSS SHAFT MOVEMENT COULD CAUSE THE SHAFT TO CONTACT THE CARRIER OR PINION TEETH, POSSIBLY LOCKING UP THE REAR WHEELS AND RESULT IN A CRASH WITHOUT PRIOR WARNING.
Consequence & remedy
Consequence: Not supplied
Remedy: INSTALL A REAR AXLE DIFFERENTIAL CROSS SHAFT RETAINING KIT.
85V029000 · Vehicle Speed Control
Mar 19, 1985
THE CRUISE CONTROL VACUUM SOLENOID VALVES MAY MALFUNCTION AT ANY TIME THE ENGINE IS RUNNING AND THE CRUISE CONTROL IS ENGAGED AND CAUSE UNEXPECTED ENGINE ACCELERATION. CONSEQUENCE OF DEFECT: LOSS OF ACCELERATOR CONTROL COULD RESULT IN A VEHICLE CRASH WITHOUT PRIOR WARNING.
Consequence & remedy
Consequence: Not supplied
Remedy: INSTALL AND RELOCATE A NEW CRUISE CONTROL SERVO ASSEMBLY.
83V081000 · Electrical SYSTEM:12V/24V/48V Battery:cables
Aug 25, 1983
THE INSULATION OF THE BATTERY CABLE, BECAUSE OF ITS POSITION, RUBS AGAINST SOME OF THE ENGINE WIRING COMPONENTS. ONCE THE INSULATION IS WORN THROUGH, THE BATTERY COULD RAPIDLY DISCHARGE.
Consequence & remedy
Consequence: Not supplied
Remedy: DEALER WILL INSTALL A NEW ENGINE HARNESS RETAINER BRACKET, PROTECTIVE CONDUIT, CABLE CLIPS, A CABLE TIE STRAP AND WILL REPOSITION THE TERMINALS ON THE GROUND STUD ON ALL INVOLVED VEHICLES.
83V064000 · Service Brakes, Hydraulic:foundation Components:disc:caliper
Jul 7, 1983
ATTACHING BOLTS WERE MISTAKENLY COATED WITH A SLIPPERY MATERIAL DURING PRODUCTION. THIS MATERIAL WILL ACT AS A LUBRICANT AND BOLTS MAY LOOSEN AND EVENTUALLY FALL OFF.
Consequence & remedy
Consequence: Not supplied
Remedy: DEALER WILL INSTALL NEW CALIPER BRACKET BOLTS FREE OF CHARGE.
Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗
NHTSA investigations
2DP96006 · Brake Pull
Opened May 14, 1996 · Closed Oct 18, 1996
Status: closed (inferred from source dates) · Service Brakes, Hydraulic
THE PETITIONS STATED THAT:WE REPRESENT THE OWNER OF A 1990 CHEVROLET CORVETTE WHICH, WHEN THE BRAKES WERE APPLIED, SUDDENTLY, VIOLENTLY, AND UNEXPECTEDLY PULLS TO THE LEFT.THIS IS A INTERMITTENT DEFECT WHICH DOES NOT OCCUR WITH AN REGULARITY.
PE90032 · Tie Rod Socket Failure
Opened Jan 12, 1990 · Closed Mar 22, 1990
Status: closed (inferred from source dates) · Suspension
There is no summary currently available