2019 Chevrolet Blazer

Electronically controlled thermostat and sensor fail or get stuck at a much lower coolant temperature causing the dash to display the “steering assist is reduced drive with care.” It isn’t just a message, the steering is much harder to use potentially causing an accident. The ac completely doesn’t work causing potential for sensitive, elderly, or young children and pets to overheat inside, it’s significant risk of injury or death from the hot summer temperatures. The engine coolant temperature gauge is all the way down on C position which isn’t registering how hot/cold the engine gets potentially causing damage to the vehicle and a total loss of the vehicle entirely due to damage from the engine overheating. GM sent out letters to 2021 blazer owners which included a special coverage number N252508350 applying to people with this year having this problem and they have until 2036 or 150,009 mi to get the repairs made free of charge, they just bring the document with the special repair codes to the dealer and they fix it free of charge. After doing research online, this problem is affecting all years of the 2019+ blazers with the 3.6L V6 engine AND other known problems with other models and years of their other lineup of cars, it’s very widespread across their platforms. So what are people supposed to do when it isn’t the 2021 year? Pay an $800+ repair bill to GM when they KNOW it’s more widespread than just this year/make? This is a scam. I can’t even do the repair myself because I’m having trouble finding the correct parts online and not only that the repair is extensive, the whole top half of the engine needs to be taken apart just to get to the thermostat, we’re talking the airbox and intake manifold, all the plastic parts and shrouds and sensors covering engine, the fuel rail and injectors, pipes and clamps, engine coolant needs drained and refilled. It’s a major fix. I’m reporting this complaint to raise awareness and hopefully GM will do the right thing.

Shift to Park issue: Known issue where the car fails to recognize it is in Park, preventing it from shutting off. Electronics: Potential blanked-out display screens, USB port issues, and malfunctioning cameras. Steering Assist: Restricted, temperature gauge goes to cold and radiator fan blows hard. I have to unplug negative cable to battery and reconnect and everything goes back to normal.

2019 Chevy Blazer. Car would not turn off the electrical components when parked. Put car in park and walked away and there is a warning note that says, "Shift to Park." But the car was in park. Called Chevy and they know about the issue on the 2019-2023 vehicles. They sent me the Technical Service Bulletin. Back in 2020, the car had the shifting harness and button replaced and we just had to have it replaced again because it is a consistent issue with the vehicle. Except this time, the dealer charged us $668.40 to fix it! It is a known issue by the company and THEY sent me the service bulletin to get it fixed. It should have been covered by Chevy, or, at least a recall should be instituted. The power to the car wouldn't shut off. We were able to jump the car to get it started again.

The shift-to-park sensor in my 2019 Chevy Blazer RS is malfunctioning. After shifting into park, the vehicle does not detect that it is in park and displays a “Shift to Park” message. The issue is/has been ongoing and now it is almost impossible to bypass with wiggling the shifter. Safety Risk: The vehicle cannot be fully shut off or locked, increasing the risk of battery drain or unintended movement. This poses a safety risk if the vehicle is left in public or on an incline. Inspection History: The vehicle was taken in to the dealership in November/December 2025 due to MULTIPLE Warning Lights: “Shift to Park”, "Steering Assist", "Stabilink" and the usb-C charging port under the radio screen will stop working all together when this happens as well. This started around September 2025 and has occurred regularly since.

I keep getting this message that pops up, "Steering Assist reduced Drive with Care". At the same time this happens the temp gauge stays on cold, the ac quits working, the engine fan is on high, and most of the time I get code PO128. We have had it in to the dealer and they said the its the thermostat or the temp sensor. From what I am reading it could be a factory issue with the EMI issue from sensitive ECT circuitry. This has been an ongoing issue for us for over a year.