2019 CAN-AM Ryker

When making a left hand turn, at any speed over 35mph, the rear of the bike wobbles, and the front tires, at least one if not both begin to automatically brake. I’ve looked into it, it appears to be related to a SAS/VSS issue with the suspension and stability having too much play. I’ve researched and found that so many people reported it to NHTSA that you have an article, 137209. They will not fix this issue under recall because they claim it’s not an issue being reported enough. I can’t afford to have this issue that came from factory fixed because they don’t want to fix their issue. This is a major concern, at highway speed on an overpass I experience this issue daily and I’m afraid it’s going to cause an accident, because when it occurs the bike automatically slows 10-15 mph without me hitting the brakes, and I am worried I’m going to get hit by someone because of a defect in their product.

When making a left hand turn, at any speed over 35mph, the rear of the bike wobbles, and the front tires, at least one if not both begin to automatically brake. I’ve looked into it, it appears to be related to a SAS/VSS issue with the suspension and stability having too much play. I’ve researched and found that so many people reported it to NHTSA that you have an article, 137209. They will not fix this issue under recall because they claim it’s not an issue being reported enough. I can’t afford to have this issue that came from factory fixed because they don’t want to fix their issue. This is a major concern, at highway speed on an overpass I experience this issue daily and I’m afraid it’s going to cause an accident, because when it occurs the bike automatically slows 10-15 mph without me hitting the brakes, and I am worried I’m going to get hit by someone because of a defect in their product.

While driving at speeds around or above 20 mph when turning left the ABS or braking system begins activating causing a very serious hazard. This does not happen at any speeds when turning right. This has been reported by numerous Ryker owners. I have brought it into the shop and they are not able to locate or resolve the issue. This is an extremely dangerous situation as the biker will lose control at high speeds and potential force the driver off road or into another lane. This happens all the time and is constantly happening.

On 06/28, while operating my vehicle at around 20 miles an hour I received a "Brake Failure" warning (indicated by a message on the vehicle display) and my brakes began to fail to fully engage. I was able to stop the vehicle after pressing the brake multiple times. I shut down the vehicle and the brakes returned to normal operation, however after riding just a few miles the issue began again. The issue persists and the requirement to "pump the brake peddle to achieve a stop remain consistent. I have taken the vehicle to a shop to have the vehicle inspected and repaired. The vehicle has 10,800 miles on it and recently had the recommended 12k mile maintenance performed on it (May of 2022) by a certified technician, at a certified dealer (Ridenow Powersports in Goodyear Arizona). No issues were reported at the time during that inspection. The vehicle has not been used in a highly spirited way and the brakes applied in normal, dry, conditions. No constant brake compression while riding or any other abnormal operation conditions. I contacted Can Am and they provided no insight, suggestion or direction other that "see an authorized dealer".

My Ryker started giving me problems going into sharp curves to the left. I have taken it to the dealership back in November and they couldn’t find anything wrong with it. The problem continues. The same curves I used to take at 55-60, now I can’t take over 40-45 without the front end feeling like it is going to slid me off the road! The bike I used to love riding and always wanted to take curvy roads with scares me now. It’s not safe! I am either going to take the curves at speed limit and chance getting slug off into a ditch or I am going to slow down 10-15 mph and have someone run into the back of me. I posted my problem on a Ryker Facebook page and had over 60 comments. I am by far not the only one with this same problem! If something doesn’t get done about it, someone is going to get seriously hurt or killed! Please make this a recall! We want to enjoy our bikes like we used to and feel safe doing it!

The contact owns a 2019 CAN-AM Ryker. The contact stated while driving 12 MPH and making a turn, the vehicle started jerking and began to lose motive power. There was no warning light illuminated. The contact stated upon making half the turn and slightly depressing the accelerator pedal, the vehicle independently accelerated. The contact depressed the brake pedal and continued to drive. The vehicle was taken to the dealer where the pitman arm was replaced; however, the failure reoccurred while driving and making a turn. The vehicle was taken to the dealer where it was diagnosed that the traction control was malfunctioning and would engage while making turns. The dealer reported the failure to the manufacturer. The manufacturer informed the dealer that the vehicle was operating as intended and that there was no failure with the traction control system. The vehicle was not repaired. The failure mileage was approximately 16,000.

I have been dealing with an issue since December 2021 where the wheels lock up on tight left turns which has been pretty dangerous. Trike gives off vss code c0063 and c006c. I have taken it to the dealer on 3 occasions each time being told it was fixed only to have to situation reoccur a few days later. I have been unable to ride the vehicle since December.