2013 BRAMMO EMPULSE R. CONSUMER WRITES IN REGARDS TO A DEFECTIVE ISSUE REGARDING MOTORCYCLE. *SMD THE ISSUE INVOLVES A RECALL, WHERE THE REAR TAIL ASSEMBLY BRACKET NEAR ITS MOUNTING POINTS TO THE FRAME MAY FRACTURE OR BREAK OFF WHILE THE MOTORCYCLE IS IN MOTION. IT IS POSSIBLE THAT THE TAIL ASSEMBLY COULD THEN MAKE CONTACT WI…
Read full complaint
2013 BRAMMO EMPULSE R. CONSUMER WRITES IN REGARDS TO A DEFECTIVE ISSUE REGARDING MOTORCYCLE. *SMD THE ISSUE INVOLVES A RECALL, WHERE THE REAR TAIL ASSEMBLY BRACKET NEAR ITS MOUNTING POINTS TO THE FRAME MAY FRACTURE OR BREAK OFF WHILE THE MOTORCYCLE IS IN MOTION. IT IS POSSIBLE THAT THE TAIL ASSEMBLY COULD THEN MAKE CONTACT WITH THE REAR WHEEL, WHICH COULD CAUSE SHOCK AND VIBRATION OF THE MASS TAIL ASSEMBLY AND COULD CAUSE METAL FATIGUE NEAR THE MOUNTING POINTS. THE PROBLEM WAS FIRST REPORTED BY THE CONSUMER WHILE RIDING THE MOTORCYCLE.
Brammo, Inc. (Brammo) is recalling certain model year 2013-2014 Empulse and Empulse R motorcycles manufactured November 19, 2012, to July 8, 2014. Oil leaking from the transmission breather tube may blow onto the rear fender and tire.
Consequence & remedy
Consequence: If oil leaks and contacts the rear tire, a loss of control may occur, increasing the risk of crash.
Remedy: Brammo will notify owners, and dealers will install a new transmission breather baffle kit, free of charge. The recall began on February 11, 2015. Owners may contact Brammo customer service at 1-541-482-9555.
Brammo, Inc. (Brammo) is recalling certain model year 2013 Empulse motorcycles manufactured November 19, 2012, through June 18, 2013. The rear tail assembly bracket can fatigue and may allow the rear tail assembly to break off while riding.
Consequence & remedy
Consequence: If the rear tail assembly breaks off, it could contact the rear wheel, increasing the risk of a crash.
Remedy: Brammo will notify owners, and dealers will replace the rear tail section assembly with a new version not susceptible to failure, free of charge. The recall began on July 25, 2013. Owners may contact Brammo at 1-541-482-9555.
Brammo, Inc. is recalling certain model year 2013 Empulse electric motorcycles manufactured February 22, 2013, through March 29, 2013. Due to a high current cable being attached to the motor controller incorrectly, electrical shorting can occur.
Consequence & remedy
Consequence: An electrical short can cause a complete loss of power while riding the motorcycle or a fire, either of which can result in a vehicle crash or personal injury.
Remedy: Brammo will notify owners, and technicians will inspect the high current cable at the motor controller and correct its installation, if needed. The recall began on June 26, 2013. Customers may contact Brammo at 1-541-482-9555.
Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗
NHTSA investigations
0
No exact-year investigations in this snapshot.
2013 Brammo Empulse Problems, Complaints & Recalls | Skip That Year
Illustration