IllustrationENGINE SEIZED AFTER AN ACCELERATION EVENT ON THE FREEWAY. *TR
2012 BMW S 1000 Rr
Owner reports · Recalls · Investigations
Limited comparison data
There is not enough comparable history to draw a useful model-year comparison.
About this comparison →How this year compares
Owner complaints by model year
Compare all S 1000 Rr years →Counts vary with age, sales and reporting. They are not failure rates.
What owners reported most
Tap a category to read its complaints. One report may name several components.
When problems were reported
Mileage at the reported incident
Limited mileage data: 6 of 6 reports include usable mileage. There isn’t enough coverage to show a useful chart.
NHTSA’s mileage field refers to the reported incident, not necessarily the filing date. This shows report counts, not the likelihood of a failure.
What to inspect
Issues worth paying extra attention to based on owner reports.
- Engine. Review the 3 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
- Fuel/propulsion System. Review the 2 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
- Electrical System. Review the 1 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
NHTSA owner reports · September 18, 2026 snapshot.
0 crash reports0 fire reports0 injury reports
Engine complaints
3 reportsTL* THE CONTACT OWNS A 2012 BMW S100 RR MOTORCYCLE. THE CONTACT STATED THAT THE VEHICLE WAS INCLUDED IN NHTSA CAMPAIGN ID NUMBER:12V177000 (ENGINE AND ENGINE COOLING: ENGINE) AND WAS SERVICED UNDER THE RECALL. AFTER THE REPAIRS, THE VEHICLE STALLED WITHOUT WARNING. THE VEHICLE WAS NOT TAKEN TO THE DEALER FOR INSPECTION OR REPAIR…
Read full complaint
TL* THE CONTACT OWNS A 2012 BMW S100 RR MOTORCYCLE. THE CONTACT STATED THAT THE VEHICLE WAS INCLUDED IN NHTSA CAMPAIGN ID NUMBER:12V177000 (ENGINE AND ENGINE COOLING: ENGINE) AND WAS SERVICED UNDER THE RECALL. AFTER THE REPAIRS, THE VEHICLE STALLED WITHOUT WARNING. THE VEHICLE WAS NOT TAKEN TO THE DEALER FOR INSPECTION OR REPAIR. THE MANUFACTURER WAS NOT CONTACTED. THE FAILURE AND THE CURRENT MILEAGE WAS 2,100.
TL* THE CONTACT OWNS A 2012 BMW S1000RR MOTORCYCLE. THE CONTACT STATED THAT WHILE RIDING 55 MPH, THE CONNECTING ROD PUNCHED A HOLE THROUGH THE ENGINE BLOCK CAUSING OIL AND ANTIFREEZE TO LEAK ALL OVER THE CONTACT AND THE ROAD. IN ADDITION, THE OIL LEAKED ON THE REAR TIRES CAUSING THEM TO SEIZE AND THE CONTACT ALMOST LOST CONTROL …
Read full complaint
TL* THE CONTACT OWNS A 2012 BMW S1000RR MOTORCYCLE. THE CONTACT STATED THAT WHILE RIDING 55 MPH, THE CONNECTING ROD PUNCHED A HOLE THROUGH THE ENGINE BLOCK CAUSING OIL AND ANTIFREEZE TO LEAK ALL OVER THE CONTACT AND THE ROAD. IN ADDITION, THE OIL LEAKED ON THE REAR TIRES CAUSING THEM TO SEIZE AND THE CONTACT ALMOST LOST CONTROL OF THE VEHICLE. THE CONTACT MERGED THE VEHICLE OFF THE HIGHWAY WHERE IT WAS TOWED TO THE DEALER. THE CONTACT SUSTAINED INJURIES TO THE NECK AND BACK AS A RESULT OF THE FAILURE. THE MANUFACTURER WAS NOTIFIED WHO STATED THAT THEY WOULD CONTACT HIM WITHIN THE NEXT SEVEN DAYS. THE CONTACT WAS AWAITING A RETURN CALL FROM THE DEALER. THE FAILURE MILEAGE WAS 800.
Official recalls
212V585000 · Structure:motorcycle:kickstand/center Stand
Dec 14, 2012
BMW is recalling certain model year 2012-2013 S 1000 RR motorcycles manufactured September 2011, through December 2012. Due to a manufacturing fault, the side-stand attachment bolts could start to loosen. The loosening of the side-stand bolts could cause the stand to separate from the frame of the motorcycle.
Consequence & remedy
Consequence: A separation of the side-stand could cause the motorcycle to fall, causing a risk of injury.
Remedy: BMW will notify owners, and dealers will clean the sidestand mounting plate threads and replace the side-stand mounting plate bolts, free of charge. The recall began on January 29, 2013. Owners may call BMW at 1-800-525-7417 or email BMW at CustomerRelations@bmwusa.com.
12V177000 · Engine And Engine Cooling:engine
Apr 20, 2012
BMW IS RECALLING CERTAIN MODEL YEAR 2012 S1000RR MOTORCYCLES, MANUFACTURED FROM SEPTEMBER 1, 2011, THROUGH APRIL 10, 2012. DUE TO A MANUFACTURING PROCESS ERROR, THE CONNECTING ROD BOLTS MAY BECOME LOOSE DURING HIGH ENGINE TEMPERATURES AND/OR HIGH ENGINE OPERATING SPEEDS WHICH COULD RESULT IN CATASTROPHIC ENGINE DAMAGE.
Consequence & remedy
Consequence: IN THE EVENT OF ENGINE DAMAGE, ESCAPING OIL COULD CAUSE HANDLING ISSUES, INCREASING THE RISK OF A CRASH.
Remedy: BMW WILL NOTIFY OWNERS, AND DEALERS WILL REPLACE THE CONNECTING ROD BOLTS FREE OF CHARGE. THE SAFETY RECALL BEGAN ON JUNE 8, 2012. OWNERS MAY CONTACT BMW CUSTOMER RELATIONS AND SERVICES AT 1-800-525-7417.
Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗
NHTSA investigations
0No exact-year investigations in this snapshot.