2011 BMW 550I

SINCE JAN 2014 THE FUEL INJECTORS FAILED AND REPLACED 2 TIMES AND THE VEH IS CURRENTLY AT THE POSITION OF CRTIZ BMW DEALERSHIP IN GA SINCE FEB 12/2015 TO REPLACE THE FUEL INJECTORS FOR THE 3RD TIME AND ALSO TO REPAIR THE SEAT BELT MALF ON THE FRONT PASSENGER SIDE THAT WERE FAILED TO WORK SINCE FEB OF 2014. ON FEB OF 2014 I HAVE REACHED OUT TO CRITZ BMW SERVICE DEPARTMENT AND EXPLAINED THE ISSUE TO [XXX] AND ALSO CONTACTED BMW IN JUNE OF 2014 TO CUST CARE INDIVIDUALS AND [XXX], [XXX]THE CUSTOMER RELATION MGR MANY TIMES FROM OVER 6 MONTHS ABOUT THE SEAT BELT MALF SAFETY ISSUE SINCE THEN TO HAVE THIS ISSUE FIXED BUT I WAS TOLD THAT BMW COULDN'T DUPLICATE OR REPAIR THE SEAT BELT. 3 PASSENGERS INCLUDING MY WIFE WERE AT RISK AND SAW THE LIGHT FOR SEAT BELT MALF WARNING LIGHT TURNED ON IN THIS VEH WHILE SETTING ON THE FRONT PASSENGER SEAT AND I ALSO HAVE PHOTOS DATED SINCE FEB 2014. THE WARNING INDICATED THAT THE AIR BAG WON'T DEPLOY IN CASE OF ANY ACCIDENT AND I HAD TO STOP THE VEH WHILE DRIVING ON THE HIGHWAY FOR THE PASSENGER'S SAFETY AND I ALSO CONTACTED BMW EMERGENCY ASSISTANCE AND I WAS TOLD TO TAKE THE VEHICLE TO THE DEALERSHIP FOR INSPECTIONS. [XXX] AT CRITZ BMW MENTIONED THAT THE SERVICE DEPT AND BMW ARE AWARE OF THE ISSUE WITH THE SEAT BELT AND THAT THEY ARE IN CONTACT TO REPLACE THE SEAT MAT ON THE PASSENGER SIDE AND THAT THERE IS AN ISSUE WITH THE SENSOR. I WAS OFFERED BY BMW TO TRADE THIS VEHICLE AND I TOLD [XXX] THAT I WILL NOT TRADE THIS VEHICLE UNTIL ITS FIXED SINCE I DON'T WANT TO PUT SOMEONE'S LIFE IN DANGER DUE TO THE SEAT BELT ISSUE THAT BMW COULDN'T FIX AND I TOLD THEM THAT THEY CAN SIMPLY REPURCHASE, REPLACE OR REPAIR THIS VEHICLE. ON MARCH 12/2015 [XXX] TOLD ME OVER THE PHONE THAT THE BMW COULDN'T DUPLICATE OR REPAIR THE SEAT BELT MALFUNCTION ON THE PASSENGER SIDE SEAT. I TOLD [XXX] OVER THE PHONE THAT I WILL NOT RISK THE LIFE OF MY WIFE OR ANY OTHER PERSON DRIVING THIS VEHICLE. BMW SIMPLY TOLD ME THAT THEY COULDN'T DO ANYTHING ELSE ABOUT IT AND THAT THEY WILL BE CLOSING MY CASE. I WAS TOLD BY BMW

I WAS DRIVING ON A RESIDENTIAL STREET AND SHIFTED INTO 3RD GEAR. THE CAR BEGAN TO BUCK VIOLENTLY. I PUSHED IN THE CLUTCH TO STOP THE BUCKING. I WAS APPROACHING AN INTERSECTION. I ATTEMPTED TO ACCELERATE AND THE GAS PEDAL WAS NON-RESPONSIVE. THE VEHICLE THEN INDICATED THAT IT HAD A DRIVETRAIN MALFUNCTION. I WAS ABLE TO PULL OVER, TURN THE CAR OFF AND BACK ON AND DRIVE 0.5 MILES TO MY DESTINATION. WHILE PARKED, THE PARKING BRAKE ALSO MALFUNCTIONED AND I WAS UNABLE TO TURN IT OFF. THE CAR WAS TOWED TO THE DEALERSHIP. THERE IS A SIGNIFICANT DESIGN DEFICIENCY WITH THIS VEHICLE. THE PROBLEM WITH MY CAR HAD TO DO WITH A BROKEN PLASTIC PART ON THE WATER CHANNEL THAT LEADS AROUND THE TRUNK. THE PLASTIC COVER IS SUPPOSED TO SNAP INTO A GROMMET THAT IS IN A HOLE, THUS SEALING THE HOLE FROM WATER. IN MY SITUATION, THE GROMMET WAS MISSING. GIVEN THE DESIGN OF THE PLASTIC PART, THERE IS NO WAY TO KNOW THAT THERE IS AN ISSUE WITHOUT REMOVING THE PLASTIC PART. THE HOLE THAT THE PLASTIC PIECE SNAPS INTO LEADS DIRECTLY INTO THE TRUNK. IN THE BOTTOM OF THE TRUNK ARE SENSITIVE ELECTRONIC MODULES THAT CONTROL THE FUEL MANAGEMENT SYSTEM AND THE PARKING BRAKE. THERE IS NO DRAIN IN THE TRUNK THAT WOULD ALLOW WATER TO LEAVE THE VEHICLE. MY VEHICLE WAS PARKED IN A PARKING LOT DURING A RAIN STORM. AS A RESULT OF THE DESIGN, I GOT WATER IN THE TRUNK, WHICH RUINED THESE TWO MODULES, RESULTING IN THE VEHICLE BECOMING DISABLED WHILE DRIVING. I BELIEVE THAT THIS IS A SIGNIFICANT SAFETY ISSUE FOR THE FOLLOWING REASONS: I) AS A CONSUMER, I HAD NO IDEA THAT THE ELECTRONICS THAT ENABLE THE VEHICLE TO MANAGE FUEL WERE LOCATED IN THE TRUNK; II) THE DESIGN OF THE WATER CHANNEL AROUND THE TRUNK SEEMS INADEQUATE GIVEN THAT ANY FAILURE OF THE PLASTIC SHIELD / GROMMET COMBINATION WOULD LEAD TO WATER IN THE TRUNK AND EXPOSE THESE CRITICAL COMPONENTS. *TR