← New search

2025 Altec Am Series Aerial Device

Owner reports · Recalls · Investigations

Limited comparison data

There is not enough comparable history to draw a useful model-year comparison.

About this comparison →

How this year compares

Owner complaints by model year

Other model years Selected year
Compare all Am Series Aerial Device years →

Counts vary with age, sales and reporting. They are not failure rates.

What owners reported most

No component reports in this snapshot.

Tap a category to read its complaints. One report may name several components.

When problems were reported

Mileage at the reported incident

Limited mileage data: 0 of 0 reports include usable mileage. There isn’t enough coverage to show a useful chart.

NHTSA’s mileage field refers to the reported incident, not necessarily the filing date. This shows report counts, not the likelihood of a failure.

NHTSA owner reports · September 18, 2026 snapshot.

0 crash reports0 fire reports0 injury reports

What owners actually said

0 reports

No matching complaints in this snapshot.

Official recalls

5

26V541000 · Forward Collision Avoidance: Automatic Emergency Braking

Aug 21, 2026

Altec Industries, Inc. (Altec) is recalling certain 2019-2026 AN Series, 2023 AA Series, 2022-2026 Digger Derrick, and 2025 AM Series vehicles. The Bendix automatic braking system was not recalibrated after relocating the front radar box.

Consequence & remedy

Consequence: An improperly calibrated system may have a delayed braking response, increasing the risk of a crash.

Remedy: Altec will update the collision mitigation system with the revised the parameters, recalibrate, and test the system, free of charge. Owner notification letters are expected to be mailed October 16, 2026. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN-3356.

26V310000 · Equipment:mechanical:boom/crane/ladder:controls/control Wiring

May 15, 2026

Altec Industries, Inc. (Altec) is recalling certain 2022-2025 AT Series, 2021-2025 AN Series Aerial Device, 2020-2026 TA Series Aerial Device, 2021 L Series Aerial Device, 2021 LR Series Aerial Device, 2023-2025 AM Series Aerial Device, and 2024-2025 AA Series Aerial Device vehicles. The ground level emergency stop (E-stop) may not stop hydraulic functions of the machine when the machine is in ePTO mode.

Consequence & remedy

Consequence: Hydraulic functions that do not immediately stop when the ground level E-stop is pressed, increase the risk of injury.

Remedy: Altec will inspect the units and test to verify the E-stop function. If the wiring is found to be incorrect, it will be updated, free of charge. Letters informing owners of the safety risk were mailed on July 8, 2026. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN-3322.

26V243000 · Equipment:mechanical:boom/crane/ladder:controls/control Wiring; Equipment:mechanical:boom/crane/ladder:turntable

Apr 16, 2026

Altec Industries, Inc. (Altec) is recalling certain 2025-2026 AM Series Aerial Device vehicles. The emergency stop switch located at the turntable is inoperative when the upper controls interlock is active and allows the upper and lower controls to remain powered when the emergency stop is depressed.

Consequence & remedy

Consequence: An inoperative emergency stop switch increases the risk of injury.

Remedy: Altec will notify owners to inspect for the presence of an adapter harness. If installed, the owner will be instructed to notify Altec, and no further action is needed. If the harness is not installed, Altec will provide a kit to complete the repair, free of charge. Owner notification letters were mailed June 9, 2026. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN-3307.

Additional source detail variants (2)

Equipment:mechanical:boom/crane/ladder:controls/control Wiring

Altec Industries, Inc. (Altec) is recalling certain 2025-2026 AM Series Aerial Device vehicles. The emergency stop switch located at the turntable is inoperative when the upper controls interlock is active and allows the upper and lower controls to remain powered when the emergency stop is depressed.

Consequence: An inoperative emergency stop switch increases the risk of injury.

Remedy: Altec will notify owners to inspect for the presence of an adapter harness. If installed, the owner will be instructed to notify Altec, and no further action is needed. If the harness is not installed, Altec will provide a kit to complete the repair, free of charge. Owner notification letters were mailed June 9, 2026. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN-3307.

Equipment:mechanical:boom/crane/ladder:turntable

Altec Industries, Inc. (Altec) is recalling certain 2025-2026 AM Series Aerial Device vehicles. The emergency stop switch located at the turntable is inoperative when the upper controls interlock is active and allows the upper and lower controls to remain powered when the emergency stop is depressed.

Consequence: An inoperative emergency stop switch increases the risk of injury.

Remedy: Altec will notify owners to inspect for the presence of an adapter harness. If installed, the owner will be instructed to notify Altec, and no further action is needed. If the harness is not installed, Altec will provide a kit to complete the repair, free of charge. Owner notification letters were mailed June 9, 2026. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN-3307.

26V071000 · Electrical System:wiring:power Distribution Module/ipdm

Feb 6, 2026

Altec Industries, Inc. (Altec) is recalling certain 2021-2025 Digger Derrick and 2021-2025 AM Series Aerial Device vehicles. The chassis engine may start unintentionally due to a missing diode in the Altec power distribution module.

Consequence & remedy

Consequence: An engine that starts unexpectedly increases the risk of injury to anyone near the engine compartment during maintenance operations.

Remedy: Altec will provide instructions to inspect the power distribution module for a diode, and provide a repair kit as necessary, free of charge. Owner notification letters were mailed March 27, 2026. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN-3281.

25V650000 · Engine And Engine Cooling:exhaust System:manifold/header/muffler/tail Pipe; Structure:critical Fasteners

Sep 25, 2025

Altec Industries, Inc. (Altec) is recalling certain 2021-2025 AA Series, 2024-2025 AM Series, and 2025 AN Series aerial devices. The outrigger pad holder may have been installed too close to the exhaust outlet.

Consequence & remedy

Consequence: The exhaust may overheat the outrigger pad, increasing the risk of a fire.

Remedy: Altec will instruct owners to inspect the outrigger pad holder placement. A kit to relocate the outrigger pad holder or exhaust outlet will be provided as necessary, free of charge. Owner notification letters were mailed November 21, 2025. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN-3252.

Additional source detail variants (2)

Structure:critical Fasteners

Altec Industries, Inc. (Altec) is recalling certain 2021-2025 AA Series, 2024-2025 AM Series, and 2025 AN Series aerial devices. The outrigger pad holder may have been installed too close to the exhaust outlet.

Consequence: The exhaust may overheat the outrigger pad, increasing the risk of a fire.

Remedy: Altec will instruct owners to inspect the outrigger pad holder placement. A kit to relocate the outrigger pad holder or exhaust outlet will be provided as necessary, free of charge. Owner notification letters were mailed November 21, 2025. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN-3252.

Engine And Engine Cooling:exhaust System:manifold/header/muffler/tail Pipe

Altec Industries, Inc. (Altec) is recalling certain 2021-2025 AA Series, 2024-2025 AM Series, and 2025 AN Series aerial devices. The outrigger pad holder may have been installed too close to the exhaust outlet.

Consequence: The exhaust may overheat the outrigger pad, increasing the risk of a fire.

Remedy: Altec will instruct owners to inspect the outrigger pad holder placement. A kit to relocate the outrigger pad holder or exhaust outlet will be provided as necessary, free of charge. Owner notification letters were mailed November 21, 2025. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN-3252.

Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗

NHTSA investigations

0

No exact-year investigations in this snapshot.