2022 Volkswagen Golf

When shifting (6 speed manual) the shifter knob has come off the shaft multiple times and must be put back on when driving causing a safety issue. When shifting from 2-3 and 4-5 pressure on the shift knob causes it to sometimes turn counter clockwise and then the know pops of the shifting mechanism. I have to try and match up the knob with the shaft while driving and push it back and turn it clockwise. In the past, shifter knobs where screwed on and torqued tightly to keep them on. This one only requires a slight twist to come on and off the shaft.

The shift knob on the gear selector of my manual transmission vehicle broke off while attempting to merge into traffic while shifting into 2nd gear at roughly 10mph, leaving me unable to select a gear. This put my safety and that of others at risk by temporarily preventing me from moving my vehicle as I was merging with traffic. In addition, this is the second time a factory shift knob has broken in this car. The first one broke and was repaired by a dealer approximately 6 months ago. The shift knob is still in my car, but I will try to replace it soon. This one has not been inspected by a 3rd party yet. There were no warnings or signs of damage prior to the knob breaking off.

The shift knob for the manual transmission broke off the shift assembly while accelerating and merging onto the freeway. This is what happened the first time the knob broke off. It has happened 3 times due to the part being physically broken. My safety and the safety of others was at risk. When a car is moving at speed and no longer has the option to shift into a higher gear, you become stuck at a slower speed and this happens very suddenly. If you apply brake then the engine will loose RPM and stall out causing the car to loose control of acceleration suddenly and could result in lose of control. This is stated in the VW owners manual under how to drive a manual transmission. The issue has been confirmed by the local dealership and by VW corporate. The component has been inspected my VW dealership. The vehicle has zero warnings or ways to monitor this.

The shift knob pulls off the manual transmission shifter shaft under certain driving conditions, such as a fast shift. I believe that the shifter knob retainer clip is loose or broken. This is a safety problem. I first noticed it when I had to make a quick maneuver during a turn. Experiencing the shift knob pull off the shaft while I was downshifting was dangerous and distracting. I reported the issue to the service department at my local VW dealer. They were not aware of others having the same problem and asked me to bring in the car if I knew how to duplicate it. I can’t duplicate it in normal driving. The second time it happened I was braking for a traffic light while downshifting. I was able to push the knob back down without crashing, but it is very unnerving. No warning lights are triggered. I have not taken the car in to the dealer yet for an inspection. I don’t like the idea of trying to duplicate the problem like the dealer suggested. I want them to inspect the assembly and will probably give them an opportunity soon. I’m reporting this because I feel that VW should treat this issue with more urgency.

As I was merging onto a highway, the shift lever popped up and disconnected from the linkage as I was changing gears. This left me temporarily unable to accelerate on the on-ramp with vehicle traffic around me. I was able to push back down on the lever and reinstate shifting capabilities but the connection was still loose to the touch and could be pulled up again when I came to a rest after I finished driving. This particular part was eventually replaced under warranty as it had many cosmetic cracks and chips in it. Unknown if this is related to the loose linkage as that is a separate part of the shift boot. This vehicle is the manual transmission version.

Poor quality of the shifter knob component and installation from the factory for the 6-speed manual transmission variant of the 2022 VW GTI. The shifter knob can come loose and pop out of the metal shaft while shifting gears in the drive. The poor quality of the knob develops a crack in the corner of the component which can cause the knob to detach from the transmission over time and make the car undrivable. Since taking delivery of the car from the dealership, the shifter knob appears to not be installed properly as the component can feel loose and pop out of the metal shaft and get detached from the transmission. This incident of the shift knob popping out occurred a few times while driving. As changing gears with the shifter knob is a crucial aspect of driving the car, the current component poses a serious quality and safety issue for the car that was overlooked by the manufacturer.

The manual transmission shift knob has separated from the shift lever multiple times while driving. While shifting between gears, the knob lifts up with the boot off of the actual shift lever and I am unable to complete a shift until reconnecting the knob to the lever. The first time this happened, I was shocked and was nearly hit as I was on a highway entrance ramp and suddenly was not in gear and slowing down in a high traffic situation. Luckily I was able to get it sorted and make a shift with the knob loosely in place and then pull off the road. Firmly pressing the knob down onto the lever seemed to get it solidly attached, but unfortunately this has recurred more than once since then. I'm now aware and conscious to be very careful shifting but to any driver who this happens to the first time could easily be put into a situation of lost control of their vehicle speed or accidentally pull on the steering wheel when the shifter in their hand suddenly is not attached and the movement of their arm to shift results in a jerking of their body since. The shifter in the 2022 GTI (as well as Golf R) is a new design and it appears that multiple owners have experienced the plastic attachment cracking, breaking, or otherwise causing the shift knob to detach. Some owners report having a replacement knob installed and a repeat of the same problem. There seems to be either faulty design or manufacturing of the part, and this is a critical component to car control.

During regular operation I shifted the car from 1st to 2nd gear (manual transmission) and the shift knob came off of the metal rod that attaches it to the linkage and transmission. There was no loud crack to indicate something breaking at the time. thankfully it happened at low speeds and I was able to pull over and reattach the knob and drive it home but the plastic that attaches it to the car is very much broken