The contact's father-in-law owns a 2025 Toyota Tundra. The contact stated that while her father-in-law was driving at an undisclosed speed, the brakes independently activated. No warning lights were illuminated. The contact stated that the vehicle stopped excessively hard. In addition, because of the hard vehicle stop, the conta…
Read full complaint
The contact's father-in-law owns a 2025 Toyota Tundra. The contact stated that while her father-in-law was driving at an undisclosed speed, the brakes independently activated. No warning lights were illuminated. The contact stated that the vehicle stopped excessively hard. In addition, because of the hard vehicle stop, the contact's father-in-law and mother-in-law were jerked forward very hard. The contact stated that her father-in-law and mother-in-law, who were seated in the front passenger's seat, stated that the impact felt like it could have caused whiplash. The contact stated that the two brake sensors were disabled prior to the drive. The contact referenced an unknown recall which had a similar failure description; however, the VIN was not associated. The dealer was made aware of the failure. The contact was informed that because the VIN was not associated with the recall, the dealer had declined to inspect or repair the vehicle. The vehicle was not diagnosed or repaired by an independent mechanic or dealer. The manufacturer was made aware of the failure but provided no assistance. The contact was advised to contact the NHTSA Hotline to report the failure. The failure mileage was approximately 2,000.
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2024 Toyota Tacoma Hybrid, 2025 Tundra Hybrid, Tundra, 2026 RAV4 Hybrid, 4Runner i-Force Max Hybrid, and 4Runner vehicles. The load carrying capacity modification label may display inaccurate added weight values. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 110, "Tire Selection and Rims."
Consequence & remedy
Consequence: A vehicle with an incorrect maximum capacity weight value may be overloaded, increasing the risk of a crash.
Remedy: Dealers will replace the load carrying capacity modification label, free of charge. Owner notification letters are expected to be mailed October 18, 2026. Owners may contact Toyota's customer service at 1-800-331-4331. Toyota's number for this recall is 26TA18.
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2024-2025 Toyota Tundra, Tacoma Hybrid, Tacoma, RAV4 Hybrid, Land Cruiser Hybrid, Lexus GX550, 2024-2026 Tundra Hybrid, 2025 Sequoia Hybrid, Crown Signia, Grand Highlander, Lexus TX500 Hybrid, Lexus NX350 Hybrid, 2025-2026 Grand Highlander Hybrid, and Lexus TX350 vehicles. The load carrying capacity modification label may display inaccurate added weight values. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 110, "Tire Selection and Rims."
Consequence & remedy
Consequence: A vehicle with an incorrect maximum capacity weight value may be overloaded, which can increase the risk of a crash.
Remedy: Dealers will replace the load carrying capacity modification label, free of charge. Owner letters were mailed May 26, 2026. Owners may contact Toyota's customer service at 1-800-331-4331. Toyota's numbers for this recall are 26LB04, 26LA04, 26TB07, and 26TA07.
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2024-2025 Toyota Tundra and Tundra Hybrid vehicles equipped with a Panoramic View Monitor (PVM) system. The rearview camera image may not display when the vehicle is placed in reverse. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 111, "Rear Visibility."
Consequence & remedy
Consequence: A rearview camera image that does not display reduces the driver's view behind the vehicle, increasing the risk of a crash.
Remedy: Dealers will update the parking assist ECU software, free of charge. Owner notification letters were mailed March 23, 2026. Owners may contact Toyota's customer service at 1-800-331-4331. Toyota's numbers for this recall are 26TB02 and 26TA02.
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2022-2025 Tundra, Tundra Hybrid, and 2023-2025 Sequoia Hybrid vehicles. A software error may cause the rearview image not to display when the vehicle is placed in reverse. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 111, "Rear Visibility."
Consequence & remedy
Consequence: A rearview image that does not display reduces the driver's view behind the vehicle, increasing the risk of a crash.
Remedy: Dealers will update the multimedia display software, free of charge. Owner notification letters were mailed November 19, 2025. Owners may contact Toyota's customer service at 1-800-331-4331. Toyota's numbers for this recall are 25TB10 and 25TA10.
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2022-2025 Toyota Tundra and Tundra Hybrid vehicles. Moisture may enter the reverse light assemblies and cause a light failure.
Consequence & remedy
Consequence: Reverse light failure may reduce visibility, and not alert pedestrians and other drivers that the vehicle is backing up, increasing the risk of a crash.
Remedy: Dealers will replace both reverse light assemblies and repair the wire harnesses as necessary, free of charge. Owner letters were mailed May 23, 2026. This is a phased recall. Owners may contact Toyota's customer service at 1-800-331-4331.Toyota's numbers for this recall are 24TB06 and 24TA06.
Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗
NHTSA investigations
0
No exact-year investigations in this snapshot.
2025 Toyota Tundra Problems, Complaints & Recalls | Skip That Year
Illustration