2005 Toyota Tacoma

TOOK VEHICLE IN FOR INSPECTION, NOTIFIED THAT THE FRAME HAS EXCESSIVE CORROSION (RUST) ON THE ENTIRE FRAME WITH SIGNS OF METAL SEPARATION. A CRACK WAS ALSO NOTED ON THE PASSENGER SIDE WHERE THE FRONT AND BACK PARTS OF THE C-FRAME ARE WELDED TOGETHER. WHEN THE SURFACE RUST WAS GROUND AWAY, THE CRACK WAS 5" LONG AND THE BOTTOM OF THE C-FRAME HAD TWO LARGE PERFORATIONS. WITH THIS CONDITION, THE VEHICLE WILL NOT PASS THE INSPECTION. THE DEALER CONTACTED REGIONAL REP AND OWNER CONTACTED TOYOTA CUSTOMER SERVICE - BOTH ADVISED NO ASSISTANCE AND THE FRAMES WERE OF A DIFFERENT PRODUCTION LOT THEN THE PRIOR RECALL (2ND GEN VS 1ST GEN). ALSO CITED AGE AND MILEAGE BEING A FACTOR. OTHER THAN THE FRAME, THE VEHICLE IS IN VERY GOOD CONDITION. 2005 TACOMA WITH 131000 MILES SHOULD STILL BE A PASSABLE VEHICLE. *TR

AFTER HAVING MY TRUCK INSPECTED, I WAS INFORMED BY MY MECHANIC THAT THE FRAME OF MY TRUCK WAS RUSTING AND IN THE FUTURE IT WILL NOT PASS INSPECTION. TO ME THIS IS RIDICULOUS SINCE I ONLY HAVE 36000 MILES ON MY VEHICLE.TOYOTA RECALLED THE TACOMA TRUCKS BETWEEN 2000 AND 2004. EVIDENTLY SOME 2005 TACOMA'S SHOULD ALSO BE INCLUDED IN THIS RECALL. I HAVE READ ONLINE OF OTHER NUMEROUS PEOPLE HAVING THE SAME PROBLEM. WE SHOULD NOT HAVE TO PAY TO HAVE A DEALERSHIP CHECK OUT THE PROBLEM AND THEN PAY FOR FIXING THIS PROBLEM IF AT ALL POSSIBLE. TOYOTA HAS JUST MADE A NON BUYER OF ME OF THEIR VEHICLES IN THE FUTURE. *TR

THE FRAME IS ROTTING THROUGH ON THE DRIVERS SIDE INSIDE FRAME RAIL. THE PRESSED C CHANNEL FRAME IS ALSO ROTTING AND SEPARATING. I TAKE VERY GOOD CARE OF MY TRUCK. PEOPLE ARE CONSTANTLY TELLING ME. HOW GOOD IT LOOKS FOR THE YEAR. IT IS RIDICULOUS AND TOYOTA MOTOR COMPANY IS NOT DOING ANYTHING. THE DEALER HAS CONTACTED CORPORATE AND THEY DO NOT INTEND TO DO ANYTHING ABOUT THE 2005 AND UP TACOMA FRAME RUSTING/ROT PROBLEM. *TR

TL* THE CONTACT OWNS A 2005 TOYOTA TACOMA. THE CONTACT STATED THAT THE VEHICLE WAS INVOLVED IN A SLIGHT CRASH. THE CONTACT WAS NOT INJURED AND A POLICE REPORT WAS NOT FILED. THE VEHICLE WAS DEEMED AS DESTROYED BECAUSE THE FRAME WAS COMPLETELY RUSTED AND THE CONTACT WAS ADVISED THAT ALTHOUGH THE VEHICLE COULD BE REPAIRED, IT WOULD NOT PASS A STATE INSPECTION. THE CONTACT SPOKE WITH THE MANUFACTURER BUT NO ASSISTANCE WAS PROVIDED. THE FAILURE AND CURRENT MILEAGES WERE 54,000.

I HAVE A HOLE ON THE INSIDE OF BOX FRAME NEXT TO THE CAT. CONVERTER ON DRIVER SIDE. THIS WAS DISCOVERED BACK IN JANUARY OF 2013, AND WAS IMMEDIATELY REPORTED TO THE TOYOTA REP OVER THE DEALERSHIP. I'VE INQUIRED ABOUT THE SITUATION 3 TIMES SINCE THEN AND HAVE JUST GOTTEN THE ANSWER THAT ITS UNDER INVESTIGATION. THIS HOLE WHICH I CAN ALMOST STICK MY FIST THROUGH LOOKS TO BE LOCATED IN THE CRUMBLE ZONE, AND IS IN A HIGH STRESSED PART OF THE FRAME. I KNOW TOYOTA HAS RECALLED FIRST GENERATION TRUCKS FOR FRAME ROT, BUT WHY HAVEN'T THEY RECALLED ANY OF THE SECOND GENERATION TRUCKS FOR THE SAME ISSUES. YOU CAN SEARCH THE WEB AND FIND THAT I'M NOT ALONE WHEN IT COMES TO FRAME ROT ON THE SECOND GENERATION TACOMA TRUCKS. TOYOTA NEEDS TO BUCK UP AND FIX THESE ISSUES BEFORE SOMEONE GETS SEVERELY INJURED OR KILLED DUE TO THE DEFECTIVE FRAMES. PEOPLE SPEND THE EXTRA MONEY ON TOYOTA VEHICLES FOR QUALITY DURABILITY AND LONGEVITY. I WORK FOR A TOYOTA PRODUCTION PLANT AND I CAN'T IMAGINE THAT THEY ARE AVOIDING SUCH A DANGEROUS ISSUE THAT NEEDS TO BE RESOLVED ASAP. I HOPE THAT THE NATIONAL HIGHWAY TRANSPORTATION LOOKS INTO THIS AND FORCES A RECALL BEFORE LIVES ARE LOST! *TR

AS I WAS LEAVING WORK I SLOWLY DROVE OVER A SPEED BUMP. THE REAR END OF MY TRUCK BEGAN TO BOUNCE LIKE A BOAT IN CHOPPY WATER. I GOT OUT AND LOOKED TO SEE IF I HAD A LOW TIRE. ALL FOUR TIRES WERE FINE SO I KEPT LOOKING. UPON CLOSER INSPECTION TO THE LEFT REAR WHEEL WELL, I NOTICED THAT THE SHOCK ROD HAD BROKEN OFF AT THE THEADED END AND SHOT STRAIGHT THROUGH THE BED OF MY TRUCK. I IMMEDIATELY TOOK THE TRUCK TO GLENN TOYOTA FOR INSPECTION. INITIALLY THEY TOOK GREAT INTEREST UNTIL AFTER THEY LEARNED THAT TOYOTA MANUFACTURING WOULD NOT COVER THE CATASTROPHIC FAILURE. NOW THE TRUCK RIDES LIKE A BOAT IN CHOPPY WATER AND EVEN THE SLIGHTEST BUMP IN THE ROAD CAUSES AN EXAGGERATED RESPONSE IN THE SUSPENSION MAKING IT DANGEROUS TO DRIVE. THERE IS NO PREVIOUS HISTORY OF DAMAGE TO THE VEHICLE NOR HAS IT BEEN MISTREATED. *TR

THE TOYOTA DEALERSHIP WHERE I PURCHASED MY NEW 2005 TACOMA 7 YRS AGO, INFORMED ME MY TRUCK WILL NOT PASS STATE INSPECTION DUE TO HOLES RUSTED THROUGH THE FRAME. THE LARGEST OF THE HOLES WAS LOCATED UNDER THE DRIVER'S SIDE ON THE INSIDE OF THE MAIN BOX FRAME COMPONENT. THERE ARE SIMILAR HOLES ALONG OTHER BOX STYLE FRAME PARTS. THESE RUST HOLES ORIGINATED FROM THE INSIDE OF THE BOX FRAME AND NOT FROM WHERE ANY RUST PREVENTATIVE COULD BE APPLIED BY THE OWNER. ANY POST PRODUCTION APPLICATION OF UNDERCOATING OR UNDERBODY OIL BY THE OWNER TO THE INTERIOR OF THESE BOXED AREAS IS NOT POSSIBLE SINCE THEY ARE INACCESSIBLE. THE DEALERSHIP INFORMED ME THAT THERE WAS NOTHING THEY CAN DO WITHOUT TOYOTA HEADQUARTERS APPROVAL. I CALLED THE TOYOTA CUSTOMER RELATIONS LINE AT 1-800-331-4331 AND AFTER A LONG CONVERSATION WITH THE REPRESENTATIVE I WAS TOLD THAT MY TRUCK MODEL WAS NOT COVERED BY EITHER A VEHICLE WARRANTY OR A REMEDIAL ACTION BY TOYOTA. RESEARCHING THIS ISSUE ON THE INTERNET REVEALS THAT TOYOTA TACOMA MODELS HAVE HAD FRAME RUSTING PROBLEMS CONSISTENTLY SINCE THE MID 90'S. MY OPTIONS FROM TOYOTA, ALL AT MY OWN EXPENSE, ARE TO: 1. FIND A FRAME SHOP THAT CAN PATCH THESE HOLES BUT MOST LIKELY THE PATCH WILL ONLY LAST A YEAR. 2. HAVE THE FRAME REPLACED WHICH THE DEALERSHIP ROUGHLY ESTIMATED IT TO BE CLOSE TO $12,000. 3. JUNK THE TRUCK AND GET A NEW VEHICLE. I BOUGHT THIS TRUCK EXPECTING TO GET AT LEAST 300-400K MILES. THE TRUCK LOOKS NEW, THE BODY HAS NO RUST, IT HAS NO MECHANICAL PROBLEMS AND RUNS GREAT. I HAVE RELIGIOUSLY FOLLOWED THE RECOMMENDED SERVICE SCHEDULE. *TR