IllustrationAS I WAS DRIVING THE DRIVER SIDE SUN VISOR UNEXPECTEDLY AND SUDDENLY FELL INTO MY FIELD OF VISION AND WOULD NOT MAINTAIN AN UPRIGHT POSITION. *TR
2007 Toyota Camry Hybrid
Owner reports · Recalls · Investigations
Limited comparison data
There is not enough comparable history to draw a useful model-year comparison.
About this comparison →How this year compares
Owner complaints by model year
Compare all Camry Hybrid years →Counts vary with age, sales and reporting. They are not failure rates.
What owners reported most
All reported categories
Tap a category to read its complaints. One report may name several components.
When problems were reported
Mileage at the reported incident
350–25K
5325–50K
8650–75K
11975–100K
169100–150K
81150K+
543 reports with mileage · 59 unknown
NHTSA’s mileage field refers to the reported incident, not necessarily the filing date. This shows report counts, not the likelihood of a failure.
What to inspect
Issues worth paying extra attention to based on owner reports.
- Service Brakes. Review the 391 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
- Vehicle Speed Control. Review the 160 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
- Electronic Stability Control (esc). Review the 115 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
NHTSA owner reports · September 18, 2026 snapshot.
31 crash reports7 fire reports14 injury reports
What owners actually said
602 reportsMY DASHBOARD IS VERY STICKY, SHINY AND MELTING. IT IS SO SHINY THAT IT MAKES A GLARE UPON MY WINDSHIELD, IMPAIRING THE VISIBILITY. I HAVE ONLY USED A DAMP CLOTH TO CLEAN THE DASHBOARD. I GOOGLED THIS CONDITION AND FOUND MANY OTHER CAMRY OWNERS OF 07, 08, AND 09 YEAR CARS FROM HAWAII, US MAINLAND, AND AUSTRALIA THAT HAVE PROBLEMS…
Read full complaint
MY DASHBOARD IS VERY STICKY, SHINY AND MELTING. IT IS SO SHINY THAT IT MAKES A GLARE UPON MY WINDSHIELD, IMPAIRING THE VISIBILITY. I HAVE ONLY USED A DAMP CLOTH TO CLEAN THE DASHBOARD. I GOOGLED THIS CONDITION AND FOUND MANY OTHER CAMRY OWNERS OF 07, 08, AND 09 YEAR CARS FROM HAWAII, US MAINLAND, AND AUSTRALIA THAT HAVE PROBLEMS WITH THEIR DASHBOARD MELTING. IT IS SOFT AND STICKY AT NIGHTTIME AND IN THE SHADE ALSO. THIS IS CLEARLY DEFECTIVE MATERIAL USED FOR THE DASHBOARD. I AM CONCERNED ABUT FUMES FROM THE MELTING MATERIAL WHEN ENTERING THE CAR WHEN IT IS HOT. I BELIEVE TOYOTA SHOULD REPLACE THIS AS IT IS NOT COVERED UNDER WARRANTY, EVEN IF IT WAS STILL UNDER WARRANTY. *TR
WHEN BRAKES ARE APPLIED (AT A STOP OR COMING TO A STOP) THERE IS A PULSATION THAT CAN BE FELT BY THE DRIVER AND PASSENGERS. SINCE THE FIRST OCCURRENCE THIS HAPPENS 100% OF THE TIME. WHILE THIS PULSATION OF THE BRAKES HAS CONTINUED TO OCCUR, STARTING IN JULY, 2013, OCCASIONALLY, WHEN STARTING THE CAR THE FOLLOWING OCCURS: 1.…
Read full complaint
WHEN BRAKES ARE APPLIED (AT A STOP OR COMING TO A STOP) THERE IS A PULSATION THAT CAN BE FELT BY THE DRIVER AND PASSENGERS. SINCE THE FIRST OCCURRENCE THIS HAPPENS 100% OF THE TIME. WHILE THIS PULSATION OF THE BRAKES HAS CONTINUED TO OCCUR, STARTING IN JULY, 2013, OCCASIONALLY, WHEN STARTING THE CAR THE FOLLOWING OCCURS: 1. WITH THE BRAKE DEPRESSED TO START CAR, WHEN THE CAR IS PUT IN GEAR (WITH BRAKE STILL DEPRESSED) THE BRAKES DO NOT ENGAGE AND THE CAR SLOWLY ROLLS BACKWARDS (THIS HAPPENS WHETHER THE CAR IS IN DRIVE OR REVERSE). 2. AT THE SAME TIME THE BRAKE PEDAL FEELS "SOFT" AS IT IS NOT ENGAGING THE BRAKES. 3. AT THIS TIME THE FOLLOWING LIGHTS ON THE DASHBOARD ARE LIGHTED: RED BRAKE LIGHT (AND THE EMERGENCY BRAKE IS NOT ENGAGED), YELLOW (!) LIT, ABS LIT, READY LIGHT IS ALSO LIT. 4. ALL OF THIS WHILE THE BRAKES ARE "SOFT" AND NOT FUNCTIONING CORRECTLY. AFTER 5-8 SECONDS THE GAS ENGINE ENGAGES, THE LIGHTS GO OFF, AND THE BRAKE JERKS INTO ACTION. TO DATE, OUR DEALERSHIP HAS NO IDEA HOW TO FIX THIS PROBLEM. CONSIDERING THE NUMBER OF INCIDENTS REPORTED ON SAFERCAR.GOV AND THE NUMBER OF INTERNET REPORTINGS OF THIS AND RELATED PROBLEMS, IT WOULD SEEM THAT A SERVICE BULLETIN OR A RECALL WOULD BE APPROPRIATE. NOT ALL DEALERSHIPS ARE FAMILIAR WITH OR KNOW HOW TO DEAL WITH THE PROBLEM. *TR
WHILE DRIVING HOME, FOUR LIGHTS LIT UP ON MY DASHBOARD AND THE CHECK VSC SYSTEM WARNING APPEARED AS WELL. THERE WAS NOTHING NOTICEABLE THAT HAPPENED SO I DROVE ON TO THE HOUSE. ONLY THING I NOTICED THE NEXT MORNING WAS THAT THE BRAKE PEDAL KICKED BACK TOWARDS ME WHEN I STARTED THE CAR. BRAKES APPEARED TO WORK FINE. TOOK THE CAR …
Read full complaint
WHILE DRIVING HOME, FOUR LIGHTS LIT UP ON MY DASHBOARD AND THE CHECK VSC SYSTEM WARNING APPEARED AS WELL. THERE WAS NOTHING NOTICEABLE THAT HAPPENED SO I DROVE ON TO THE HOUSE. ONLY THING I NOTICED THE NEXT MORNING WAS THAT THE BRAKE PEDAL KICKED BACK TOWARDS ME WHEN I STARTED THE CAR. BRAKES APPEARED TO WORK FINE. TOOK THE CAR INTO MY TOYOTA DEALER (WHERE I PURCHASED IT NEW IN NOVEMBER OF 2006). THEY CHECKED IT AND FOUND OUT THAT THE ABS ACTUATOR NEEDED TO BE REPLACED. PRICE FOR THE PART WAS $2500. LABOR WAS $118. CAR WAS FIXED IN TWO DAYS. FORTUNATELY I HAD AN EXTENDED WARRANTY THAT COVERED ALL BUT $100 SO I FELT VERY LUCKY. MY MAIN INTENTION ON SUBMITTING THIS IS TO FIND OUT WHY TOYOTA HASN'T ISSUED A RECALL ON THIS PART. I'VE READ (IN THE TOYOTANATION FORUM ONLINE) ABOUT MANY DRIVERS WHO HAVE HAD THIS PROBLEM AT LESS THAN 65,000 MILES; MINE OCCURRED AT 82,600 MILES. AND THE PRICE OF THE PART IS ASTONISHING. SO MY PERSONAL EXPERIENCE WAS FINE. I DIDN'T NOTICE ANY BRAKING ISSUES BUT WOULD LIKE TO SUBMIT THIS AS ANOTHER OWNER WHO EXPERIENCED THIS SAME ISSUE. EXPENSIVE FOR MANY, BUT I WAS LUCKY TO HAVE THE WARRANTY. ...UPDATED 08/16/13 *BF *TR
SUNVISOR DROPPED DOWN AND WILL NOT REMAIN IN THE STOWED (FLAT AGAINST THE CEILING) POSITION. *TR
TL* THE CONTACT OWNS A 2007 TOYOTA CAMRY HYBRID. THE CONTACT STATED THAT WHILE DRIVING AT VARIOUS SPEEDS, THE VEHICLE WOULD MAKE A LOUD THUMPING SOUND. THE VEHICLE WAS TAKEN TO THE DEALER. THE TECHNICIAN DIAGNOSED THAT THE ABS MODULE ACTUATOR ASSEMBLY WAS DEFECTIVE AND NEEDED TO BE REPLACED. THE MANUFACTURER WAS NOT MADE AWARE O…
Read full complaint
TL* THE CONTACT OWNS A 2007 TOYOTA CAMRY HYBRID. THE CONTACT STATED THAT WHILE DRIVING AT VARIOUS SPEEDS, THE VEHICLE WOULD MAKE A LOUD THUMPING SOUND. THE VEHICLE WAS TAKEN TO THE DEALER. THE TECHNICIAN DIAGNOSED THAT THE ABS MODULE ACTUATOR ASSEMBLY WAS DEFECTIVE AND NEEDED TO BE REPLACED. THE MANUFACTURER WAS NOT MADE AWARE OF THE FAILURE. THE VEHICLE WAS NOT REPAIRED. THE VIN WAS NOT REPAIRED. THE FAILURE MILEAGE WAS 108,000 AND THE CURRENT MILEAGE WAS 108,952.
THERE IS AN ELECTRICAL OR CHEMICAL BURNING SMELL THAT IS PRESENT. THE SMELL HAS BEEN PRESENT SINCE THE TIME I BOUGHT THE CAR. INITIALLY, I DID NOT THINK ANYTHING OF IT AND WAS TOLD BY THE DEALER THAT IT WAS DUE TO THE NEWNESS OF THE HYBRID ENGINE. HOWEVER, THE SMELL HAS NEVER DISSIPATED OVER THE YEARS. I HAVE BECOME TOLERANT…
Read full complaint
THERE IS AN ELECTRICAL OR CHEMICAL BURNING SMELL THAT IS PRESENT. THE SMELL HAS BEEN PRESENT SINCE THE TIME I BOUGHT THE CAR. INITIALLY, I DID NOT THINK ANYTHING OF IT AND WAS TOLD BY THE DEALER THAT IT WAS DUE TO THE NEWNESS OF THE HYBRID ENGINE. HOWEVER, THE SMELL HAS NEVER DISSIPATED OVER THE YEARS. I HAVE BECOME TOLERANT TO THE SMELL BUT PASSENGERS CONTINUE TO COMMENT ON THE SMELL, IT PERMEATES OUR CLOTHING, LUGGAGE (IN THE TRUCK), ETC. THE TOYOTA DEALER ACKNOWLEDGES THE PROBLEM BUT HAS NOT OFFERED ANY WAY TO REMEDY THIS SITUATION. I HAVE BECOME INCREASINGLY CONCERNS AT THE URGING OF OTHERS THAT THERE IS THE POTENTIAL FOR HARMFUL HEALTH CONSEQUENCES. THERE ARE A NUMBER OF HYBRID ONLINE FORUMS/DISCUSSION GROUPS DISCUSSING THE SAME SMELL IN THEIR TOYOTA HYBRID CARS, IT DOES NOT APPEAR TO BE LIMITED TO THE CAMRY MODEL. *TR
AS I WAS APPROACHING A PEDESTRIAN CROSSING, THE ABS LIGHT AND CHECK VSC LIGHT AND BRAKE LIGHT WENT ON IN MY CAMRY HYBRID. WHEN I TRIED TO APPLY BRAKES TO STOP, I REALIZED THAT THE BRAKES COMPLETELY FAILED. I DID A SHARP EVASIVE TURN AND HIT THE CURB HARD IN ATTEMPT NOT TO RUN OVER PEDESTRIANS IN THE CROSSING! THE LIGHTS SUBSEQUE…
Read full complaint
AS I WAS APPROACHING A PEDESTRIAN CROSSING, THE ABS LIGHT AND CHECK VSC LIGHT AND BRAKE LIGHT WENT ON IN MY CAMRY HYBRID. WHEN I TRIED TO APPLY BRAKES TO STOP, I REALIZED THAT THE BRAKES COMPLETELY FAILED. I DID A SHARP EVASIVE TURN AND HIT THE CURB HARD IN ATTEMPT NOT TO RUN OVER PEDESTRIANS IN THE CROSSING! THE LIGHTS SUBSEQUENTLY DISAPPEARED AND BRAKES RESUMED THEIR NORMAL FUNCTION AFTER A FEW MINUTES. THE ISSUE OF BRAKES FAILING IS INTERMITTENT AND HAPPENED SUBSEQUENTLY SEVERAL TIMES AT VARIOUS SPEEDS. WHEN TAKEN TO THE DEALER AT FIRST I WAS TOLD THERE WERE NO CODES REGISTERED IN THE COMPUTER AND THE BRAKES OPERATE STANDARD. WHEN I INSISTED AFTER APPROXIMATELY 7 HOURS OF TESTING THE DEALER TOLD ME THE PROBLEM IS WITH THE BRAKE CONTROL UNIT (COMPUTER). AFTER RESEARCHING ONLINE I DISCOVERED ITS A WIDESPREAD PROBLEM!!! AND YET TOYOTA IS BEHAVING IMMORAL NOT RECALLING THE FAULTY PARTS THAT IN MANY CASES CAN NOT EVEN BE DIAGNOSED. MOREOVER THEY DO NOT EVEN ADMIT THAT THERE'S AN ISSUE! *TR UPDATED 8/22/13 *CN
I RECENTLY PURCHASED A '07 TOYOTA CAMRY FROM MY MOTHER. IT STILL HAS WARRANTY. I HAVEN'T TAKEN IT IN YET, BUT THE DASHBOARD IS MELTING. I WAS IN AN UNDERGROUND PARKING DECK AWAY FROM HOME. I WAS PUTTING AN ADDRESS INTO MY GPS WHILE RESTING ONE OF MY FINGERS ON THE DASHBOARD WHILE I TYPED. I WENT TO REMOVE MY FINGER AND REAL…
Read full complaint
I RECENTLY PURCHASED A '07 TOYOTA CAMRY FROM MY MOTHER. IT STILL HAS WARRANTY. I HAVEN'T TAKEN IT IN YET, BUT THE DASHBOARD IS MELTING. I WAS IN AN UNDERGROUND PARKING DECK AWAY FROM HOME. I WAS PUTTING AN ADDRESS INTO MY GPS WHILE RESTING ONE OF MY FINGERS ON THE DASHBOARD WHILE I TYPED. I WENT TO REMOVE MY FINGER AND REALIZED THAT MY FINGERNAIL WAS STUCK IN THE DASHBOARD. A COUPLE OF DAYS LATER I WAS LOADING SOME THIN BAMBOO STALKS (LESS THAN 1/4 INCH THICK) AND THEY GOUGED HOLES MY DASHBOARD. I AM VERY SAD. I WANTED TO SEE IF ANYONE ELSE HAD THIS PROBLEM.....APPARENTLY SO...AND SOME SOUND MUCH WORSE THAN MINE. I HOPE THEY WILL FIX THIS. *TR
AFTER HEARING LOTS OF NOISES FROM THE BRAKE ACCUMULATOR FOR MONTHS, THE BRAKES FAILED WHILE DRIVING. CHECK VSC WARNING, BRAKE LIGHTS, ABS WARNING, AND OTHER BRAKE RELATED WARNING LIGHTS CAME ON. DURING BRAKING THE BRAKES RELEASED, AND QUITE EXCESSIVE PRESSURE WAS REQUIRED TO STOP THE CAR AND AVOID A CRASH. TESTING THE SYSTE…
Read full complaint
AFTER HEARING LOTS OF NOISES FROM THE BRAKE ACCUMULATOR FOR MONTHS, THE BRAKES FAILED WHILE DRIVING. CHECK VSC WARNING, BRAKE LIGHTS, ABS WARNING, AND OTHER BRAKE RELATED WARNING LIGHTS CAME ON. DURING BRAKING THE BRAKES RELEASED, AND QUITE EXCESSIVE PRESSURE WAS REQUIRED TO STOP THE CAR AND AVOID A CRASH. TESTING THE SYSTEM SHOWED FAULT CODE C1391 (ABNORMAL LEAK OF ACCUMULATOR PRESSURE). I CLEARED THE FAULT, BUT THE NEXT DAY THE PROBLEM REAPPEARED. WE HAD THE SYSTEM BLED, BUT ONCE AGAIN THE PROBLEM REAPPEARED. BRAKING ACTION INTERMITTENT WITH BRAKES RELEASING AT TIMES, AND AT OTHER TIMES LOCKING UP. A VERY UNSAFE PROPOSITION. THE ENTIRE SYSTEM HAD TO BE REPLACED AT A COST IN EXCESS OF $3,000. THIS IS 10% OF THE COST OF THE CAR FOR A PROBLEM THAT IS OBVIOUSLY A WIDESPREAD SAFETY ISSUE FOR THIS VEHICLE BASED ON THE NUMBER OF COMPLAINTS FILED. I CANNOT IMAGINE THAT THIS HAS NOT OR WILL NOT LEAD TO FATAL ACCIDENTS. *TR
Official recalls
315V689000 · Visibility:power Window Devices And Controls
Oct 22, 2015
Toyota Motor Company (Toyota) is recalling certain model year 2009-2011 Tundra, Sequoia, Corolla, Corolla Matrix and Scion xB, 2008-2011 Highlander and Highlander Hybrid, 2007 Camry and Camry Hybrid, 2009 Camry and Camry Hybrid, 2006-2011 RAV4, 2006-2010 Yaris, and 2009-2010 Scion xD and Pontiac Vibe vehicles. During the manufacturing of the Power Window Master Switch (PWMS), grease lubricant may have been inconsistently applied to the sliding electrical contacts.
Consequence & remedy
Consequence: If the sliding electrical contacts are not protected by lubricant, debris and moisture that get into the switch may cause a short circuit and the switch assembly may overheat and melt, increasing the risk of a fire.
Remedy: Toyota will notify owners, and dealers will inspect the switch, applying a lubricant if no abnormality is found. If abnormality is found, the PWMS circuit board will be replaced, free of charge. The recall is expected to begin December 20, 2015. Owners may contact Toyota customer service at 1-800-331-4331. Toyota's number for this recall is C0M.
12V491000 · Visibility:power Window Devices And Controls
Oct 10, 2012
Toyota is recalling certain model year 2007-2009 Camry, Camry Hybrid, RAV4, Corolla, Corolla Matrix, Tundra, Sequoia, Highlander, Highlander Hybrid, Yaris, Scion xB, Scion xD and Pontiac Vibe vehicles. The power window master switch assemblies in some of these vehicles were built using a less precise process for lubricating the internal components of the switch assemblies. Irregularities in this lubrication process may cause the power window master switch assemblies to malfunction and overheat.
Consequence & remedy
Consequence: If the switch overheats, it may melt, possibly resulting in a fire.
Remedy: Toyota will notify its owners, and dealers will inspect the switch and apply a special grease that inhibits heat build up or replace any switch damaged by the defect, free of charge. Toyota owners that experience a problem with a switch should not attempt to make repairs, but should contact their Toyota dealer or the Toyota Customer Experience Center at 1-800-331-4331. General Motors will contact the Pontiac Vibe owners affected by this recall and GM dealers will inspect and repair switches as necessary. Those owners may contact Pontiac Customer Care at 1-800-762-2737.
09V388000 · Vehicle Speed Control:accelerator Pedal
Oct 5, 2009
TOYOTA IS RECALLING CERTAIN MODEL YEAR 2004-2010 PASSENGER VEHICLES. THE ACCELERATOR PEDAL CAN GET STUCK IN THE WIDE OPEN POSITION DUE TO ITS BEING TRAPPED BY AN UNSECURED OR INCOMPATIBLE DRIVER'S FLOOR MAT.
Consequence & remedy
Consequence: A STUCK OPEN ACCELERATOR PEDAL MAY RESULT IN VERY HIGH VEHICLE SPEEDS AND MAKE IT DIFFICULT TO STOP THE VEHICLE, WHICH COULD CAUSE A CRASH, SERIOUS INJURY OR DEATH.
Remedy: TOYOTA FILED AN AMENDED DEFECT REPORT ON NOVEMBER 25, 2009, STATING THAT DEALERS WILL MODIFY THE ACCELERATOR PEDAL AND, ON CERTAIN VEHICLES, ALTER THE SHAPE OF THE FLOOR SURFACE UNDER THE PEDAL. THESE CHANGES ADDRESS THE RISK OF PEDAL ENTRAPMENT DUE TO INTERFERENCE WITH THE FLOOR MAT. REDESIGNED ACCELERATOR PEDALS WILL BECOME AVAILABLE BEGINNING IN APRIL 2010 AND DEALERS WILL REPLACE ANY MODIFIED PEDAL WITH THE NEW PEDAL IF DESIRED. ALSO, DEALERS WILL REPLACE ANY GENUINE TOYOTA OR LEXUS ALL-WEATHER FLOOR MATS WITH REDESIGNED ALL-WEATHER MATS, OR REPURCHASE THE PREVIOUS MATS FROM OWNERS WHO DO NOT WANT THE NEW ONES. ADDITIONALLY, SOFTWARE MODIFICATIONS WILL BE INSTALLED ON CAMRY, AVALON AND LEXUS ES 350, IS 350 AND IS 250 MODELS THAT WILL ENSURE THAT THE BRAKE OVERRIDES THE ACCELERATOR IN THE EVENT BOTH BRAKE AND ACCELERATOR PEDALS ARE APPLIED. TOYOTA WILL BEGIN MAILING LETTERS TO OWNERS ON DECEMBER 31, 2009. OWNERS MAY CONTACT TOYOTA AT 1-800-331-4331, LEXUS AT 1-800-255-3987.
Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗
NHTSA investigations
4DP22005 · Pedestrian Alert Sounds
Opened Jan 27, 2023 · Closed Aug 7, 2023
Status: closed (inferred from source dates) · Electrical System:propulsion System
NHTSA received a petition on or about July 18, 2022, requesting that Federal Motor Vehicle Safety Standard (FMVSS) 141 be applied to all electric and hybrid vehicles operating in the United States. The petition can be reviewed at NHTSA.gov under ODI Number 11486072. FMVSS 141 establishes performance requirements for pedestrian alert sounds for motor vehicles. The standard applies to hybrid and electric vehicles that have a gross vehicle weight rating of 4,536 KG or less or are defined as low-speed vehicles. The standard became fully applicable to all such vehicles manufactured on or after March 1, 2021.On January 27, 2023, NHTSA opened Defect Petition (DP) 22-005 to evaluate the subject matter described in the petition. On June 24, 2023 and as supplemented on June 25, 2023, the petitioner notified NHTSA he was withdrawing his petition. The petitioner indicated that, based on his review of data, there is no justification for asserting potential benefits that could be derived from actions sought by my petition. Based on the petitioner's withdrawal, DP22-005 is closed. Closure of this DP does not represent a determination by NHTSA regarding the subject matter of the petition.
PE14001 · Brake Actuator Malfunction
Opened Jan 23, 2014 · Closed Aug 22, 2014
Status: closed (inferred from source dates) · Service Brakes; Service Brakes, Air:supply:reservoir/tank; Service Brakes, Electric; Service Brakes, Hydraulic:power Assist
On June 25, 2014, Toyota initiated a Warranty Enhancement Program (ZE1) to extend warranty coverage for the brake actuator assembly and skid control ECU/brake pedal stroke sensor in certain MY 2007 to 2011 Toyota Camry hybrid vehicles. Toyota's program covers repairs related to two conditions:internal malfunctions of the Brake Actuator assembly; and overly sensitive monitoring logic for the Brake Pedal Stroke Sensor.Primary coverage provides warranty enhancement until November 30, 2015, with no mileage limitation.After the primary coverage period ends, secondary coverage is provided for 10 years or 150,000 miles from the date of first use, whichever occurs first.In addition, on July 10, 2014, Toyota initiated Limited Service Campaign E0U to replace the Brake Reservoir Tank in MY 2007 through 2011 Toyota Camry hybrid vehicles.The LSC will be available until June 30, 2017, and will only be available at an authorized Toyota dealer.ODI's analysis of failure data determined that the majority of records were related to the Brake Actuator condition, which appeared to be the causal component in 734 complaints/field reports and 864 warranty claims.The Brake Pedal Stroke Sensor (80 reports/189 claims) and Brake Reservoir Tank (91 reports/44 claims) conditions were identified in far fewer records.Analysis of the failure data indicate that each condition provides warning prior to any reduction in power assisted braking, with less than 10 percent of all reports and claims involving diagnostic codes or complaint narratives indicating increased braking effort or reduced brake effectiveness.In addition, most of the incidents in which reduced braking assist appears to have occurred involved operation in a reduced assist mode and not a sudden, complete loss of power assisted braking.ODI assessed reduced assist mode in a subjective driving evaluation which indicated that the brake system provided normal and harddeceleration capability with reasonable increases in pedal effort.Less than one percent of reports and claims analyzed by ODI included evidence indicating a complete loss of power assisted braking occurred and this mode requires operation for a significant period of time with multiple audible and visual warnings.Repair expense was cited in many of the complaints reviewed by ODI, especially those related to the Brake Actuator, which had repair costs exceeding $3,000 according to some complaints.High repair cost appears to have been a factor in the only crash identified by ODI for the fault conditions identified by Toyota, which involved a Brake Actuator failure that was diagnosed but the owner declined repair approximately eight months prior to the reported crash incident.This preliminary evaluation is closed.The closing of this investigation does not constitute a finding that a safety-related defect does not exist.For additional information regarding this investigation, including analysis of the Brake Actuator, Brake Pedal Stroke Sensor, and Brake Reservoir Tank fault conditions and failure experience, see Attachment A to this closing resume.
Additional source detail variants (4)
Service Brakes, Air:supply:reservoir/tank
On June 25, 2014, Toyota initiated a Warranty Enhancement Program (ZE1) to extend warranty coverage for the brake actuator assembly and skid control ECU/brake pedal stroke sensor in certain MY 2007 to 2011 Toyota Camry hybrid vehicles. Toyota's program covers repairs related to two conditions:internal malfunctions of the Brake Actuator assembly; and overly sensitive monitoring logic for the Brake Pedal Stroke Sensor.Primary coverage provides warranty enhancement until November 30, 2015, with no mileage limitation.After the primary coverage period ends, secondary coverage is provided for 10 years or 150,000 miles from the date of first use, whichever occurs first.In addition, on July 10, 2014, Toyota initiated Limited Service Campaign E0U to replace the Brake Reservoir Tank in MY 2007 through 2011 Toyota Camry hybrid vehicles.The LSC will be available until June 30, 2017, and will only be available at an authorized Toyota dealer.ODI's analysis of failure data determined that the majority of records were related to the Brake Actuator condition, which appeared to be the causal component in 734 complaints/field reports and 864 warranty claims.The Brake Pedal Stroke Sensor (80 reports/189 claims) and Brake Reservoir Tank (91 reports/44 claims) conditions were identified in far fewer records.Analysis of the failure data indicate that each condition provides warning prior to any reduction in power assisted braking, with less than 10 percent of all reports and claims involving diagnostic codes or complaint narratives indicating increased braking effort or reduced brake effectiveness.In addition, most of the incidents in which reduced braking assist appears to have occurred involved operation in a reduced assist mode and not a sudden, complete loss of power assisted braking.ODI assessed reduced assist mode in a subjective driving evaluation which indicated that the brake system provided normal and harddeceleration capability with reasonable increases in pedal effort.Less than one percent of reports and claims analyzed by ODI included evidence indicating a complete loss of power assisted braking occurred and this mode requires operation for a significant period of time with multiple audible and visual warnings.Repair expense was cited in many of the complaints reviewed by ODI, especially those related to the Brake Actuator, which had repair costs exceeding $3,000 according to some complaints.High repair cost appears to have been a factor in the only crash identified by ODI for the fault conditions identified by Toyota, which involved a Brake Actuator failure that was diagnosed but the owner declined repair approximately eight months prior to the reported crash incident.This preliminary evaluation is closed.The closing of this investigation does not constitute a finding that a safety-related defect does not exist.For additional information regarding this investigation, including analysis of the Brake Actuator, Brake Pedal Stroke Sensor, and Brake Reservoir Tank fault conditions and failure experience, see Attachment A to this closing resume.
Service Brakes, Electric
On June 25, 2014, Toyota initiated a Warranty Enhancement Program (ZE1) to extend warranty coverage for the brake actuator assembly and skid control ECU/brake pedal stroke sensor in certain MY 2007 to 2011 Toyota Camry hybrid vehicles. Toyota's program covers repairs related to two conditions:internal malfunctions of the Brake Actuator assembly; and overly sensitive monitoring logic for the Brake Pedal Stroke Sensor.Primary coverage provides warranty enhancement until November 30, 2015, with no mileage limitation.After the primary coverage period ends, secondary coverage is provided for 10 years or 150,000 miles from the date of first use, whichever occurs first.In addition, on July 10, 2014, Toyota initiated Limited Service Campaign E0U to replace the Brake Reservoir Tank in MY 2007 through 2011 Toyota Camry hybrid vehicles.The LSC will be available until June 30, 2017, and will only be available at an authorized Toyota dealer.ODI's analysis of failure data determined that the majority of records were related to the Brake Actuator condition, which appeared to be the causal component in 734 complaints/field reports and 864 warranty claims.The Brake Pedal Stroke Sensor (80 reports/189 claims) and Brake Reservoir Tank (91 reports/44 claims) conditions were identified in far fewer records.Analysis of the failure data indicate that each condition provides warning prior to any reduction in power assisted braking, with less than 10 percent of all reports and claims involving diagnostic codes or complaint narratives indicating increased braking effort or reduced brake effectiveness.In addition, most of the incidents in which reduced braking assist appears to have occurred involved operation in a reduced assist mode and not a sudden, complete loss of power assisted braking.ODI assessed reduced assist mode in a subjective driving evaluation which indicated that the brake system provided normal and harddeceleration capability with reasonable increases in pedal effort.Less than one percent of reports and claims analyzed by ODI included evidence indicating a complete loss of power assisted braking occurred and this mode requires operation for a significant period of time with multiple audible and visual warnings.Repair expense was cited in many of the complaints reviewed by ODI, especially those related to the Brake Actuator, which had repair costs exceeding $3,000 according to some complaints.High repair cost appears to have been a factor in the only crash identified by ODI for the fault conditions identified by Toyota, which involved a Brake Actuator failure that was diagnosed but the owner declined repair approximately eight months prior to the reported crash incident.This preliminary evaluation is closed.The closing of this investigation does not constitute a finding that a safety-related defect does not exist.For additional information regarding this investigation, including analysis of the Brake Actuator, Brake Pedal Stroke Sensor, and Brake Reservoir Tank fault conditions and failure experience, see Attachment A to this closing resume.
Service Brakes, Hydraulic:power Assist
On June 25, 2014, Toyota initiated a Warranty Enhancement Program (ZE1) to extend warranty coverage for the brake actuator assembly and skid control ECU/brake pedal stroke sensor in certain MY 2007 to 2011 Toyota Camry hybrid vehicles. Toyota's program covers repairs related to two conditions:internal malfunctions of the Brake Actuator assembly; and overly sensitive monitoring logic for the Brake Pedal Stroke Sensor.Primary coverage provides warranty enhancement until November 30, 2015, with no mileage limitation.After the primary coverage period ends, secondary coverage is provided for 10 years or 150,000 miles from the date of first use, whichever occurs first.In addition, on July 10, 2014, Toyota initiated Limited Service Campaign E0U to replace the Brake Reservoir Tank in MY 2007 through 2011 Toyota Camry hybrid vehicles.The LSC will be available until June 30, 2017, and will only be available at an authorized Toyota dealer.ODI's analysis of failure data determined that the majority of records were related to the Brake Actuator condition, which appeared to be the causal component in 734 complaints/field reports and 864 warranty claims.The Brake Pedal Stroke Sensor (80 reports/189 claims) and Brake Reservoir Tank (91 reports/44 claims) conditions were identified in far fewer records.Analysis of the failure data indicate that each condition provides warning prior to any reduction in power assisted braking, with less than 10 percent of all reports and claims involving diagnostic codes or complaint narratives indicating increased braking effort or reduced brake effectiveness.In addition, most of the incidents in which reduced braking assist appears to have occurred involved operation in a reduced assist mode and not a sudden, complete loss of power assisted braking.ODI assessed reduced assist mode in a subjective driving evaluation which indicated that the brake system provided normal and harddeceleration capability with reasonable increases in pedal effort.Less than one percent of reports and claims analyzed by ODI included evidence indicating a complete loss of power assisted braking occurred and this mode requires operation for a significant period of time with multiple audible and visual warnings.Repair expense was cited in many of the complaints reviewed by ODI, especially those related to the Brake Actuator, which had repair costs exceeding $3,000 according to some complaints.High repair cost appears to have been a factor in the only crash identified by ODI for the fault conditions identified by Toyota, which involved a Brake Actuator failure that was diagnosed but the owner declined repair approximately eight months prior to the reported crash incident.This preliminary evaluation is closed.The closing of this investigation does not constitute a finding that a safety-related defect does not exist.For additional information regarding this investigation, including analysis of the Brake Actuator, Brake Pedal Stroke Sensor, and Brake Reservoir Tank fault conditions and failure experience, see Attachment A to this closing resume.
Service Brakes
On June 25, 2014, Toyota initiated a Warranty Enhancement Program (ZE1) to extend warranty coverage for the brake actuator assembly and skid control ECU/brake pedal stroke sensor in certain MY 2007 to 2011 Toyota Camry hybrid vehicles. Toyota's program covers repairs related to two conditions:internal malfunctions of the Brake Actuator assembly; and overly sensitive monitoring logic for the Brake Pedal Stroke Sensor.Primary coverage provides warranty enhancement until November 30, 2015, with no mileage limitation.After the primary coverage period ends, secondary coverage is provided for 10 years or 150,000 miles from the date of first use, whichever occurs first.In addition, on July 10, 2014, Toyota initiated Limited Service Campaign E0U to replace the Brake Reservoir Tank in MY 2007 through 2011 Toyota Camry hybrid vehicles.The LSC will be available until June 30, 2017, and will only be available at an authorized Toyota dealer.ODI's analysis of failure data determined that the majority of records were related to the Brake Actuator condition, which appeared to be the causal component in 734 complaints/field reports and 864 warranty claims.The Brake Pedal Stroke Sensor (80 reports/189 claims) and Brake Reservoir Tank (91 reports/44 claims) conditions were identified in far fewer records.Analysis of the failure data indicate that each condition provides warning prior to any reduction in power assisted braking, with less than 10 percent of all reports and claims involving diagnostic codes or complaint narratives indicating increased braking effort or reduced brake effectiveness.In addition, most of the incidents in which reduced braking assist appears to have occurred involved operation in a reduced assist mode and not a sudden, complete loss of power assisted braking.ODI assessed reduced assist mode in a subjective driving evaluation which indicated that the brake system provided normal and harddeceleration capability with reasonable increases in pedal effort.Less than one percent of reports and claims analyzed by ODI included evidence indicating a complete loss of power assisted braking occurred and this mode requires operation for a significant period of time with multiple audible and visual warnings.Repair expense was cited in many of the complaints reviewed by ODI, especially those related to the Brake Actuator, which had repair costs exceeding $3,000 according to some complaints.High repair cost appears to have been a factor in the only crash identified by ODI for the fault conditions identified by Toyota, which involved a Brake Actuator failure that was diagnosed but the owner declined repair approximately eight months prior to the reported crash incident.This preliminary evaluation is closed.The closing of this investigation does not constitute a finding that a safety-related defect does not exist.For additional information regarding this investigation, including analysis of the Brake Actuator, Brake Pedal Stroke Sensor, and Brake Reservoir Tank fault conditions and failure experience, see Attachment A to this closing resume.
EA12006 · Power Window Master Switch Fire
Opened Jun 14, 2012 · Closed Feb 12, 2013
Status: closed (inferred from source dates) · Electrical System; Structure:body; Unknown Or Other
On October 10, 2012, Toyota initiated a safety recall of approximately 2.5 million U.S. vehicles involving the following models and model years:2007-2009 Camry and Camry Hybrid, 2009 Corolla and Corolla Matrix, 2008 Highlander and Highlander Hybrid, 2007-2009 RAV4, 2008-2009 Scion xB and xD, 2008-2009 Sequoia, 2007-2008 Tundra, 2007-2008 Yaris, and 2009 Pontiac Vibe.See NHTSA recall number 12V-491 for more details, including the affected vehicle manufacture dates for each vehicle model.Note that only early-production 2009 model year vehicles are included in the recall.Toyota and GM dealers will inspect the power window master switch (PWMS) assemblies and apply a specialized grease that inhibits heat build-up.The circuit board in the PWMS may be replaced with a new one if notchy or sticking feeling is observed during the inspection.The failure report summary above shows counts for the vehicles identified at the start of this Engineering Analysis, specifically the approximately 1.4 million vehicles that share an identical PWMS assembly design including, model year 2007-2009 Camry, Camry Hybrid, RAV4, and Yaris built from September 2006 through August 2008, as well as all 2008 Highlander Hybrid.Toyota subsequently identified approximately one million additional vehicles that have a slightly different PWMS design but contain the same defect condition.Note that the totals for complaints and fires shown above may include duplicative reports (between ODI and manufacturer reports).This Engineering Analysis is closed.See attached report for additional information.The ODI reports cited above can be viewed at www-odi.nhtsa.dot.gov/owners/SearchNHTSAID under the following identification numbers: 10323848, 10360414, 10392622, 10394453, 10411328, 10429983, 10436663, 10446699, 10447416, 10447417, 10447419, 10447444, 10447515, 10447845, 10447947, 10449270, 10450133, 10450568, 10450606, 10450641, 10451821, 10455540, 10455614, 10456353, 10456438, 10457854, 10457955, 10459730, 10460166, 10460691, 10461220, 10462140, 10462200, 10462247, 10462404, 10462705, 10462761, 10464451, 10464769, 10465421, 10466279, 10466667, 10468126, 10468265, 10475230, 10470313, 10470684, 10471551, 10471824, 10472336, 10472910, 10473753, 10473967, 10473969, 10476921, 10477469, 10478563 and 10478657.
Additional source detail variants (3)
Electrical System
On October 10, 2012, Toyota initiated a safety recall of approximately 2.5 million U.S. vehicles involving the following models and model years:2007-2009 Camry and Camry Hybrid, 2009 Corolla and Corolla Matrix, 2008 Highlander and Highlander Hybrid, 2007-2009 RAV4, 2008-2009 Scion xB and xD, 2008-2009 Sequoia, 2007-2008 Tundra, 2007-2008 Yaris, and 2009 Pontiac Vibe.See NHTSA recall number 12V-491 for more details, including the affected vehicle manufacture dates for each vehicle model.Note that only early-production 2009 model year vehicles are included in the recall.Toyota and GM dealers will inspect the power window master switch (PWMS) assemblies and apply a specialized grease that inhibits heat build-up.The circuit board in the PWMS may be replaced with a new one if notchy or sticking feeling is observed during the inspection.The failure report summary above shows counts for the vehicles identified at the start of this Engineering Analysis, specifically the approximately 1.4 million vehicles that share an identical PWMS assembly design including, model year 2007-2009 Camry, Camry Hybrid, RAV4, and Yaris built from September 2006 through August 2008, as well as all 2008 Highlander Hybrid.Toyota subsequently identified approximately one million additional vehicles that have a slightly different PWMS design but contain the same defect condition.Note that the totals for complaints and fires shown above may include duplicative reports (between ODI and manufacturer reports).This Engineering Analysis is closed.See attached report for additional information.The ODI reports cited above can be viewed at www-odi.nhtsa.dot.gov/owners/SearchNHTSAID under the following identification numbers: 10323848, 10360414, 10392622, 10394453, 10411328, 10429983, 10436663, 10446699, 10447416, 10447417, 10447419, 10447444, 10447515, 10447845, 10447947, 10449270, 10450133, 10450568, 10450606, 10450641, 10451821, 10455540, 10455614, 10456353, 10456438, 10457854, 10457955, 10459730, 10460166, 10460691, 10461220, 10462140, 10462200, 10462247, 10462404, 10462705, 10462761, 10464451, 10464769, 10465421, 10466279, 10466667, 10468126, 10468265, 10475230, 10470313, 10470684, 10471551, 10471824, 10472336, 10472910, 10473753, 10473967, 10473969, 10476921, 10477469, 10478563 and 10478657.
Structure:body
On October 10, 2012, Toyota initiated a safety recall of approximately 2.5 million U.S. vehicles involving the following models and model years:2007-2009 Camry and Camry Hybrid, 2009 Corolla and Corolla Matrix, 2008 Highlander and Highlander Hybrid, 2007-2009 RAV4, 2008-2009 Scion xB and xD, 2008-2009 Sequoia, 2007-2008 Tundra, 2007-2008 Yaris, and 2009 Pontiac Vibe.See NHTSA recall number 12V-491 for more details, including the affected vehicle manufacture dates for each vehicle model.Note that only early-production 2009 model year vehicles are included in the recall.Toyota and GM dealers will inspect the power window master switch (PWMS) assemblies and apply a specialized grease that inhibits heat build-up.The circuit board in the PWMS may be replaced with a new one if notchy or sticking feeling is observed during the inspection.The failure report summary above shows counts for the vehicles identified at the start of this Engineering Analysis, specifically the approximately 1.4 million vehicles that share an identical PWMS assembly design including, model year 2007-2009 Camry, Camry Hybrid, RAV4, and Yaris built from September 2006 through August 2008, as well as all 2008 Highlander Hybrid.Toyota subsequently identified approximately one million additional vehicles that have a slightly different PWMS design but contain the same defect condition.Note that the totals for complaints and fires shown above may include duplicative reports (between ODI and manufacturer reports).This Engineering Analysis is closed.See attached report for additional information.The ODI reports cited above can be viewed at www-odi.nhtsa.dot.gov/owners/SearchNHTSAID under the following identification numbers: 10323848, 10360414, 10392622, 10394453, 10411328, 10429983, 10436663, 10446699, 10447416, 10447417, 10447419, 10447444, 10447515, 10447845, 10447947, 10449270, 10450133, 10450568, 10450606, 10450641, 10451821, 10455540, 10455614, 10456353, 10456438, 10457854, 10457955, 10459730, 10460166, 10460691, 10461220, 10462140, 10462200, 10462247, 10462404, 10462705, 10462761, 10464451, 10464769, 10465421, 10466279, 10466667, 10468126, 10468265, 10475230, 10470313, 10470684, 10471551, 10471824, 10472336, 10472910, 10473753, 10473967, 10473969, 10476921, 10477469, 10478563 and 10478657.
Unknown Or Other
On October 10, 2012, Toyota initiated a safety recall of approximately 2.5 million U.S. vehicles involving the following models and model years:2007-2009 Camry and Camry Hybrid, 2009 Corolla and Corolla Matrix, 2008 Highlander and Highlander Hybrid, 2007-2009 RAV4, 2008-2009 Scion xB and xD, 2008-2009 Sequoia, 2007-2008 Tundra, 2007-2008 Yaris, and 2009 Pontiac Vibe.See NHTSA recall number 12V-491 for more details, including the affected vehicle manufacture dates for each vehicle model.Note that only early-production 2009 model year vehicles are included in the recall.Toyota and GM dealers will inspect the power window master switch (PWMS) assemblies and apply a specialized grease that inhibits heat build-up.The circuit board in the PWMS may be replaced with a new one if notchy or sticking feeling is observed during the inspection.The failure report summary above shows counts for the vehicles identified at the start of this Engineering Analysis, specifically the approximately 1.4 million vehicles that share an identical PWMS assembly design including, model year 2007-2009 Camry, Camry Hybrid, RAV4, and Yaris built from September 2006 through August 2008, as well as all 2008 Highlander Hybrid.Toyota subsequently identified approximately one million additional vehicles that have a slightly different PWMS design but contain the same defect condition.Note that the totals for complaints and fires shown above may include duplicative reports (between ODI and manufacturer reports).This Engineering Analysis is closed.See attached report for additional information.The ODI reports cited above can be viewed at www-odi.nhtsa.dot.gov/owners/SearchNHTSAID under the following identification numbers: 10323848, 10360414, 10392622, 10394453, 10411328, 10429983, 10436663, 10446699, 10447416, 10447417, 10447419, 10447444, 10447515, 10447845, 10447947, 10449270, 10450133, 10450568, 10450606, 10450641, 10451821, 10455540, 10455614, 10456353, 10456438, 10457854, 10457955, 10459730, 10460166, 10460691, 10461220, 10462140, 10462200, 10462247, 10462404, 10462705, 10462761, 10464451, 10464769, 10465421, 10466279, 10466667, 10468126, 10468265, 10475230, 10470313, 10470684, 10471551, 10471824, 10472336, 10472910, 10473753, 10473967, 10473969, 10476921, 10477469, 10478563 and 10478657.
PE12002 · Power Window Master Switch Fire
Opened Feb 6, 2012 · Closed Jun 14, 2012
Status: closed (inferred from source dates) · Electrical System; Structure:body; Unknown Or Other
ODI has identified certain Toyota vehicles experiencing a higher rate of fire and thermal event incidents among all Toyota vehicles that use the same power window master switch design.They include a total of approximately 1.4 million model year (MY) 2007 through 2009 Camry, Camry Hybrid, RAV4 and Yaris vehicles built from approximately September 2006 through August 2008, as well as all MY 2008 Highlander Hybrid vehicles.This Preliminary Evaluation has been upgraded to an Engineering Analysis (EA12-006) to further study the alleged defect and its consequences.The ODI reports cited above can be viewed at www-odi.nhtsa.dot.gov/owners/SearchNHTSAID under the following identification numbers: 10461220, 10460691, 10460166, 10459730, 10457955, 10457854, 10456438, 10456353, 10455614, 10455540, 10451821, 10450641, 10450606, 10450568, 10450133, 10449270, 10447947, 10447845, 10447515, 10447444, 10447419, 10447417, 10447416, 10446699, 10436663, 10429983, 10411328, 10407290, 10394453, 10392622, 10360414, 10323848.
Additional source detail variants (3)
Electrical System
ODI has identified certain Toyota vehicles experiencing a higher rate of fire and thermal event incidents among all Toyota vehicles that use the same power window master switch design.They include a total of approximately 1.4 million model year (MY) 2007 through 2009 Camry, Camry Hybrid, RAV4 and Yaris vehicles built from approximately September 2006 through August 2008, as well as all MY 2008 Highlander Hybrid vehicles.This Preliminary Evaluation has been upgraded to an Engineering Analysis (EA12-006) to further study the alleged defect and its consequences.The ODI reports cited above can be viewed at www-odi.nhtsa.dot.gov/owners/SearchNHTSAID under the following identification numbers: 10461220, 10460691, 10460166, 10459730, 10457955, 10457854, 10456438, 10456353, 10455614, 10455540, 10451821, 10450641, 10450606, 10450568, 10450133, 10449270, 10447947, 10447845, 10447515, 10447444, 10447419, 10447417, 10447416, 10446699, 10436663, 10429983, 10411328, 10407290, 10394453, 10392622, 10360414, 10323848.
Structure:body
ODI has identified certain Toyota vehicles experiencing a higher rate of fire and thermal event incidents among all Toyota vehicles that use the same power window master switch design.They include a total of approximately 1.4 million model year (MY) 2007 through 2009 Camry, Camry Hybrid, RAV4 and Yaris vehicles built from approximately September 2006 through August 2008, as well as all MY 2008 Highlander Hybrid vehicles.This Preliminary Evaluation has been upgraded to an Engineering Analysis (EA12-006) to further study the alleged defect and its consequences.The ODI reports cited above can be viewed at www-odi.nhtsa.dot.gov/owners/SearchNHTSAID under the following identification numbers: 10461220, 10460691, 10460166, 10459730, 10457955, 10457854, 10456438, 10456353, 10455614, 10455540, 10451821, 10450641, 10450606, 10450568, 10450133, 10449270, 10447947, 10447845, 10447515, 10447444, 10447419, 10447417, 10447416, 10446699, 10436663, 10429983, 10411328, 10407290, 10394453, 10392622, 10360414, 10323848.
Unknown Or Other
ODI has identified certain Toyota vehicles experiencing a higher rate of fire and thermal event incidents among all Toyota vehicles that use the same power window master switch design.They include a total of approximately 1.4 million model year (MY) 2007 through 2009 Camry, Camry Hybrid, RAV4 and Yaris vehicles built from approximately September 2006 through August 2008, as well as all MY 2008 Highlander Hybrid vehicles.This Preliminary Evaluation has been upgraded to an Engineering Analysis (EA12-006) to further study the alleged defect and its consequences.The ODI reports cited above can be viewed at www-odi.nhtsa.dot.gov/owners/SearchNHTSAID under the following identification numbers: 10461220, 10460691, 10460166, 10459730, 10457955, 10457854, 10456438, 10456353, 10455614, 10455540, 10451821, 10450641, 10450606, 10450568, 10450133, 10449270, 10447947, 10447845, 10447515, 10447444, 10447419, 10447417, 10447416, 10446699, 10436663, 10429983, 10411328, 10407290, 10394453, 10392622, 10360414, 10323848.