Battery fails repeatedly even after several battery replacements and dealer fixing the software at a hefty cost, presumable to make sure the battery is charging. My insurance company (State Farm) dropped my roadside assistance coverage after repeated requests to get help to start the car. I continuously dread and fear that the c…
Read full complaint
Battery fails repeatedly even after several battery replacements and dealer fixing the software at a hefty cost, presumable to make sure the battery is charging. My insurance company (State Farm) dropped my roadside assistance coverage after repeated requests to get help to start the car. I continuously dread and fear that the car will not start after a drive to the grocery store. I dear not think about using the car to take a trip away from home. I bought jump starters and now take one with me every time I consider driving this car. God forbid it drains outs before I get back to the house to recharge it, which has happened and ended up bigging a stranger to jump start my car. It is a shame that this reputable company can sell a car that has this problem, that could be easily fixed which seems to be not a problem for other manufacturers.
NHTSA ODI #11635415
Mileage unknown · Dec 29, 2024
Electrical SystemSteering
The clock spring that controls the steering wheel, horn and other electrical accessories doesn’t work. This put my life and family’s lives at risk. This is a known issue for Subarus 2015-2019. There’s multiple videos online, I have spoken to multiple owners personally that have encountered the same issue. I spoke to the Subaru d…
Read full complaint
The clock spring that controls the steering wheel, horn and other electrical accessories doesn’t work. This put my life and family’s lives at risk. This is a known issue for Subarus 2015-2019. There’s multiple videos online, I have spoken to multiple owners personally that have encountered the same issue. I spoke to the Subaru dealer and they said due to no recall has been issued for the vin number of my vehicle they can’t replace it and it cost about $1,000 dls. We need the NHTSA to step in and ask Subaru to issue a recall to start replacing the defective units at no cost to the owner.
NHTSA ODI #11632999
Mileage unknown · Oct 31, 2024
Electrical System
Horn became intermittent with failure related to steering wheel position, then failed altogether. No horn is a safety issue. We replaced the 'SRC SET 83196AJO4', AKA 'clockspring', the wiring assembly that connects the AIRBAG as well as the HORN, and all steering wheel controls.
NHTSA ODI #11622856
Mileage unknown · Sep 2, 2024
Electrical System
Been having issues with my Subaru Outback dying for years now. I’ve gone through 5 battery’s the last 6 years. No amount of driving seems to fix the issue, the replacement batteries only work for so long until it gets cold or I don’t drive my car for a week and suddenly it dies. I believe there is a parasitic drain somewhere, I …
Read full complaint
Been having issues with my Subaru Outback dying for years now. I’ve gone through 5 battery’s the last 6 years. No amount of driving seems to fix the issue, the replacement batteries only work for so long until it gets cold or I don’t drive my car for a week and suddenly it dies. I believe there is a parasitic drain somewhere, I can’t figure out what. I have nothing obstructing the hatch locking mechanism, I turn all my lights off and air system off before turn turning the car off. It’s becoming a serious issue, I have to jump my car almost everyday or every other day and am driving for over 40 minutes a day. Subaru has been unhelpful and I’m now not trusting of their help.
NHTSA ODI #11612124
Mileage unknown · Apr 5, 2024
Electrical System
Ignition inhibitor switch causing car to stay in neutral, fried the starter and battery 8 months after getting a brand new transmission under subaru warrenty
NHTSA ODI #11581331
Mileage unknown · Aug 17, 2023
Electrical SystemEngine
#1. I replaced the battery in June of 2022 after all the dash warning lights came on. My eyesight safety feature was rendered in operative. After the battery was replaced, all the warning lights eventually went out. In July of 2023 the same scenario happened again. I returned to Advance Auto retailer and the store manager c…
Read full complaint
#1. I replaced the battery in June of 2022 after all the dash warning lights came on. My eyesight safety feature was rendered in operative. After the battery was replaced, all the warning lights eventually went out. In July of 2023 the same scenario happened again. I returned to Advance Auto retailer and the store manager checked the battery. She replaced the battery with a new one of greater cold cranking amps. she was most knowledgeable and extraordinarily gracious. I asked her to check the alternator for proper function and was told it was functioning as it should. #2. On June 07, 2023, I took the automobile in for service: oil and filter change and brake pads and rotors on all four wheels. My Subaru had 68,482 miles on this date. The technician (who previously was employed by a local Subaru dealership) noticed that the engine was leaking oil and diagnosed the timing cover gasket was leaking oil. Oil leaking would contribute to the bad smells entering the passenger compartment. The gasket and three seals were replaced at a cost of $1329.94 plus 8% tax. Online research reveals that Subaru"s boxer engine suffers chronic oil consumption and seal problems. Subaru of America relies on the consumer to eat any repairs rather than fix the problem that has been going on for years.
NHTSA ODI #11539168
Mileage unknown · Jun 26, 2023
Air BagsElectrical System
There's a problem in a part called (clock spring/roll connector) that is responsible for the horn on steering wheel. It affects almost all Subaru models, like Outback, Forester, Legacy... I've verified it in a mechanic shop, and after all the tests of fuses, horn, and everything. They say the problem is the clock spring, a part …
Read full complaint
There's a problem in a part called (clock spring/roll connector) that is responsible for the horn on steering wheel. It affects almost all Subaru models, like Outback, Forester, Legacy... I've verified it in a mechanic shop, and after all the tests of fuses, horn, and everything. They say the problem is the clock spring, a part that goes after the air bag and costs around $130 plus service ($150 minimum) to change. Then I research on internet and found out it's a very common problem with a lot of videos on YouTube of people having the same issue and a lot of comments there of more people complaining about it that it should have a recall cause it's a security part. I couldn't use my horn when another driver almost hit me, that's how I figured out that my horn died. Those are just some of the videos with this related problem. There's a lot more on YouTube and a lot of posts on Internet forums as well: https://youtu.be/E73ao9zRCUM https://youtu.be/vDxvafmQ6Qg https://youtu.be/plbtVX2WZWw https://youtu.be/YIwl5AmhfQ0 https://youtu.be/ZR5Qq3zufRc
NHTSA ODI #11529015
Mileage unknown · Apr 8, 2023
Electrical System
The battery has been in need of replacement at least every year if not twice a year since purchase. This has led to issues with the rear hatch and other fuses being blown.
NHTSA ODI #11516097
Mileage unknown · Mar 21, 2023
Electrical SystemEngine
Oil consumption issues. The oil is burning more then it should. Oil light would come after 2 to 3 more after an oil change. The dealership has been notified and is working on ordering new parts for the engine. Replacing the small block of the engine. Had less the 100k miles when this problem accured. Electrical issues. The …
Read full complaint
Oil consumption issues. The oil is burning more then it should. Oil light would come after 2 to 3 more after an oil change. The dealership has been notified and is working on ordering new parts for the engine. Replacing the small block of the engine. Had less the 100k miles when this problem accured. Electrical issues. The battery is being drained after the car is turned off. Car would not start in the morning and need to be jumped. Additionally, battery eventually dies and needs to be replaced. Dealership has been notified.
NHTSA ODI #11512993
Mileage unknown · Feb 26, 2023
Electrical System
The horn in my car quit working about a month ago. I have checked the fuses and relay involved in the horn fiction. I have also tested the horns themselves and they are working. All signs point to the clock spring in the steering column being bad.
Subaru of America, Inc. (Subaru) is recalling certain model year 2016-2017 Legacy and Outback vehicles manufactured February 29, 2016, to May 6, 2016. The steering column on the affected vehicles may have been improperly machined, and as a result, turning the steering wheel may have no effect on the direction of the wheels.
Consequence & remedy
Consequence: The loss of steering ability would increase the risk of a crash.
Remedy: Subaru will notify owners, and dealers will inspect the lot number on the steering column, replacing the steering column, as necessary, free of charge. The recall began May 13, 2016. Owners may contact Subaru customer service at 1-800-782-2783 or by visiting http://www.wtd65.service-campaign.com. Subaru's number for this recall is WTD-65. Note: Until the vehicles have been inspected, owners are advised not to drive their vehicles.
Subaru of America, Inc. (Subaru) is recalling certain model year 2015 Legacy and Outback vehicles manufactured on July 20, 2015. The brake fluid used in these vehicles may contain excess moisture which may adversely affect the performance of the electronic stability control system. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 126, "Electronic Stability Control Systems."
Consequence & remedy
Consequence: Poor performance of the electronic stability control system when it is activated may result in a loss of vehicle control, increasing the risk of a crash.
Remedy: Subaru will notify owners, and dealers will perform an ABS activation, then flush and replace the brake fluid, free of charge. The recall began on May 20, 2016. Owners may contact Subaru customer service at 1-800-782-2783. Subaru's number for this recall is WTC-64.
Subaru of America, Inc. (Subaru) is recalling certain 2015 and 2016 model year Subaru Legacy 4-Door and Outback vehicles manufactured July 3, 2015, to July 27, 2015. Transmission oil may leak from a deformed seal cap on the propeller shaft yoke.
Consequence & remedy
Consequence: If the transmission oil leaks onto the exhaust pipe, there is a possible risk of fire.
Remedy: Subaru will notify owners, and dealers will replace the propeller shaft, free of charge. The recall began on August 28, 2015. Owners may contact 1-800-782-2783. Subaru's number for this recall is WQU-56.
Additional source detail variants (2)
Power Train:driveline:driveshaft
Subaru of America, Inc. (Subaru) is recalling certain 2015 and 2016 model year Subaru Legacy 4-Door and Outback vehicles manufactured July 3, 2015, to July 27, 2015. Transmission oil may leak from a deformed seal cap on the propeller shaft yoke.
Consequence: If the transmission oil leaks onto the exhaust pipe, there is a possible risk of fire.
Remedy: Subaru will notify owners, and dealers will replace the propeller shaft, free of charge. The recall began on August 28, 2015. Owners may contact 1-800-782-2783. Subaru's number for this recall is WQU-56.
Power Train:automatic Transmission
Subaru of America, Inc. (Subaru) is recalling certain 2015 and 2016 model year Subaru Legacy 4-Door and Outback vehicles manufactured July 3, 2015, to July 27, 2015. Transmission oil may leak from a deformed seal cap on the propeller shaft yoke.
Consequence: If the transmission oil leaks onto the exhaust pipe, there is a possible risk of fire.
Remedy: Subaru will notify owners, and dealers will replace the propeller shaft, free of charge. The recall began on August 28, 2015. Owners may contact 1-800-782-2783. Subaru's number for this recall is WQU-56.
Subaru of America, Inc. (Subaru) is recalling certain model year 2015 Legacy vehicles manufactured March 10, 2014, to April 16, 2015, Outback vehicles manufactured February 24, 2014, to April 16, 2015, Impreza vehicles manufactured September 9, 2014, to April 14, 2015, XV Crosstrek vehicles manufactured October 16, 2014, to April 15, 2015, and 2016 WRX vehicles manufactured March 23, 2015, and equipped with the Eyesight Driver Assist System. If the switch that activates the brake lights fails, the automatic pre-collision braking component of the driver assist system will not function.
Consequence & remedy
Consequence: If the automatic pre-collision braking system does not function as intended, the vehicle will not react to an obstacle in its path, increasing the risk of a crash.
Remedy: Subaru will notify owners, and dealers will reprogram the driver assist system, free of charge. The recall began on July 20, 2015. Owners may contact Subaru customer service at 1-800-782-2783. Subaru's number for this recall is WQS-54.
Subaru of America, Inc. (Subaru) is recalling certain model year 2015 Legacy vehicles manufactured March 10, 2014, to April 16, 2015, Outback vehicles manufactured February 24, 2014, to April 16, 2015, Impreza vehicles manufactured September 9, 2014, to April 14, 2015, XV Crosstrek vehicles manufactured October 16, 2014, to April 15, 2015, and 2016 WRX vehicles manufactured March 23, 2015, and equipped with the Eyesight Driver Assist System. If the switch that activates the brake lights fails, the automatic pre-collision braking component of the driver assist system will not function.
Consequence: If the automatic pre-collision braking system does not function as intended, the vehicle will not react to an obstacle in its path, increasing the risk of a crash.
Remedy: Subaru will notify owners, and dealers will reprogram the driver assist system, free of charge. The recall began on July 20, 2015. Owners may contact Subaru customer service at 1-800-782-2783. Subaru's number for this recall is WQS-54.
Exterior Lighting:brake Lights:switch
Subaru of America, Inc. (Subaru) is recalling certain model year 2015 Legacy vehicles manufactured March 10, 2014, to April 16, 2015, Outback vehicles manufactured February 24, 2014, to April 16, 2015, Impreza vehicles manufactured September 9, 2014, to April 14, 2015, XV Crosstrek vehicles manufactured October 16, 2014, to April 15, 2015, and 2016 WRX vehicles manufactured March 23, 2015, and equipped with the Eyesight Driver Assist System. If the switch that activates the brake lights fails, the automatic pre-collision braking component of the driver assist system will not function.
Consequence: If the automatic pre-collision braking system does not function as intended, the vehicle will not react to an obstacle in its path, increasing the risk of a crash.
Remedy: Subaru will notify owners, and dealers will reprogram the driver assist system, free of charge. The recall began on July 20, 2015. Owners may contact Subaru customer service at 1-800-782-2783. Subaru's number for this recall is WQS-54.
Subaru of America, Inc. (Subaru) is recalling certain model year 2015 Outback vehicles manufactured January 22, 2014, to August 18, 2014, and equipped with a Subaru accessory trailer hitch assembly. During installation, the trailer hitch mounting nuts may have been overtightened, potentially resulting in failure of the trailer hitch mounting studs.
Consequence & remedy
Consequence: The mounting nut(s) may not provide sufficient force to remain attached to the studs or the studs themselves might break. If this were to happen while a trailer is being towed, the driver might not be able to operate the vehicle as desired or the trailer may detach from the vehicle. Either situation could increase the risk of a crash.
Remedy: Subaru will notify owners, and dealers will replace all eight mounting nuts for the trailer hitch assembly, and will inspect all eight mounting studs for damage, free of charge. The recall began on October 7, 2014. Owners may contact Subaru customer service at 1-800-782-2783. Subaru's number for this recall is WQN-50.
Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗
NHTSA investigations
1
EA21002 · Desiccated Air Bag Inflator Rupture
Opened Sep 17, 2021 · No close date supplied
Status: open (inferred from source dates) · Air Bags:frontal:driver Side:inflator Module; Air Bags:frontal:passenger Side:inflator Module
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.
Additional source detail variants (2)
Air Bags:frontal:driver Side:inflator Module
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.
Air Bags:frontal:passenger Side:inflator Module
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.
Illustration