I have the Graco Turn2Me car seat installed rear facing on the driver's side of the middle row (captain's chairs) of my vehicle. The car seat is installed with the seat belt due to my daughter's weight (36 pounds, so we were not able to use the latch). The car seat has been adjusted to the appropriate recline based on the instal…
Read full complaint
I have the Graco Turn2Me car seat installed rear facing on the driver's side of the middle row (captain's chairs) of my vehicle. The car seat is installed with the seat belt due to my daughter's weight (36 pounds, so we were not able to use the latch). The car seat has been adjusted to the appropriate recline based on the installation method and weight of my child. There is an appropriate amount of space between the back of the driver's seat and the car seat itself. The car seat was installed by a CPST, following all rules of installation as laid out by both my vehicle manual and the car seat installation guide (graco). The issue is that despite the perfect installation, over time (meaning a few trips), the base of the car seat becomes loose as the child gets in and out of the car seat. The car seat is then no longer securely installed in the car. This particular model rotates, so that the child can be easily loaded and harnessed into the car seat while facing outwards. While the seat is facing outwards, it also tips backwards, essentially lifting a majority of the base off of the base of the seat of the car. I have reinstalled this car seat several times following all guidelines, and despite an initially correct install, within a few trips the base becomes loose and the entire car seat is tilted. Based on a quick internet search, this is a very common problem with this make and model car seat, especially when installed using the seat belt, rear facing. I do not feel that it is at all safe for my child to be in this car seat and it should be recalled immediately by Graco. No parent should have to uninstall/reinstall a car seat in a car after a few trips because it is coming lose. Photos attached show how tilted the car seat has become in the car (despite initially being installed securely). For some reason I was unable to upload videos but can share those as well showing how loose the base has become despite a proper install.
Subaru of America, Inc. (Subaru) is recalling certain 2026 Crosstrek Hybrid, 2025-2026 Forester Hybrid, Forester, and 2019-2026 Ascent vehicles. These vehicles were manufactured with an incorrect Gross Axle Weight Rating (GAWR) on the certification label. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) 110, "Tire selection and rims."
Consequence & remedy
Consequence: An incorrect GAWR label may lead to an overloaded vehicle, increasing the risk of a crash.
Remedy: Subaru will mail a new certification label to owners, free of charge. Owners may also choose to have a dealer install the new label, free of charge. Letters informing owners of the safety risk were mailed August 27, 2026. Additional letters will be mailed once the remedy is available. Owners may contact Subaru customer service at 1-844-373-6614. Subaru's number for this recall is WRH-26.
Subaru of America, Inc. (Subaru) is recalling certain 2019-2022 Ascent vehicles. The ground bolt that secures the ground terminal of the Positive Temperature Coefficient (PTC) heater may have been improperly fastened, which could result in melting of the ground terminal and surrounding components.
Consequence & remedy
Consequence: A melting ground terminal increases the risk of a fire.
Remedy: Owners are advised to park their vehicle away from structures and to avoid leaving the vehicle unattended while the engine is running. An owner who notices or smells smoke coming from the dash or driver's footwell area should immediately stop operating the vehicle and turn the ignition switch to the "Off" position. Dealers will replace the PTC heater ground bolts and if necessary, replace the ground wire and the connector holder, free of charge. Owner notification letters are expected to be mailed February 6, 2023. Owners may contact Subaru's customer service at 1-844-373-6614. Subaru's number for this recall is WRL-22.
Subaru of America, Inc. (Subaru) is recalling certain 2020 Ascent vehicles. Due to an incorrect tapered hole in the housing, the front tie rod ends may not fit properly. The improper fit can result in the tie rods and housings being deformed during assembly and service replacement if excessive torque is applied.
Consequence & remedy
Consequence: The tie rods may separate from the housing, causing a loss of steering control and increasing the risk of a crash.
Remedy: Dealers will replace the left and right front tie rod ends and housings, free of charge. Owner notification letters were mailed February 7, 2022. Owners may contact Subaru customer service at 1-844-373-6614. Subaru's number for this recall is WRL-21.
Subaru of America, Inc. (Subaru) is recalling certain 2019-2020 Ascent, 2020 Legacy and Outback vehicles. A programming error in the Transmission Control Unit (TCU) may allow the clutch to engage before the drive chain is completely clamped.
Consequence & remedy
Consequence: An improperly secured drive chain may slip and break, causing a loss of drive power and increasing the risk of a crash.
Remedy: Dealers will reprogram the TCU, inspect TCU data for chain slip, and visually inspect the chain guide. If evidence of chain slippage or damage is found, the transmission will be replaced. Repairs will be performed free of charge. Owner notification letters were mailed August 19, 2022. This recall includes all vehicles previously recalled under 19V-855. Vehicles previously recalled under 19V-855 will need to have the new remedy performed for this recall once available. Owners may contact Subaru customer service at 1-844-373-6614. Subaru's number for this recall is WRK-21.
Additional source detail variants (2)
Power Train:driveline:chain/belt
Subaru of America, Inc. (Subaru) is recalling certain 2019-2020 Ascent, 2020 Legacy and Outback vehicles. A programming error in the Transmission Control Unit (TCU) may allow the clutch to engage before the drive chain is completely clamped.
Consequence: An improperly secured drive chain may slip and break, causing a loss of drive power and increasing the risk of a crash.
Remedy: Dealers will reprogram the TCU, inspect TCU data for chain slip, and visually inspect the chain guide. If evidence of chain slippage or damage is found, the transmission will be replaced. Repairs will be performed free of charge. Owner notification letters were mailed August 19, 2022. This recall includes all vehicles previously recalled under 19V-855. Vehicles previously recalled under 19V-855 will need to have the new remedy performed for this recall once available. Owners may contact Subaru customer service at 1-844-373-6614. Subaru's number for this recall is WRK-21.
Power Train:automatic Transmission:control Module (tcm/pcm/tecm)
Subaru of America, Inc. (Subaru) is recalling certain 2019-2020 Ascent, 2020 Legacy and Outback vehicles. A programming error in the Transmission Control Unit (TCU) may allow the clutch to engage before the drive chain is completely clamped.
Consequence: An improperly secured drive chain may slip and break, causing a loss of drive power and increasing the risk of a crash.
Remedy: Dealers will reprogram the TCU, inspect TCU data for chain slip, and visually inspect the chain guide. If evidence of chain slippage or damage is found, the transmission will be replaced. Repairs will be performed free of charge. Owner notification letters were mailed August 19, 2022. This recall includes all vehicles previously recalled under 19V-855. Vehicles previously recalled under 19V-855 will need to have the new remedy performed for this recall once available. Owners may contact Subaru customer service at 1-844-373-6614. Subaru's number for this recall is WRK-21.
Subaru of America, Inc. (Subaru) is recalling certain 2019-2020 Ascent, 2018 Forester, 2018-2020 Impreza, Legacy, Outback, 2018-2019 BRZ, WRX, and Toyota 86 vehicles. The low-pressure fuel pump inside the fuel tank may fail.
Consequence & remedy
Consequence: Fuel pump failure can cause an engine stall while driving, increasing the risk of a crash.
Remedy: Dealers will replace the low-pressure fuel pump, free of charge. Owner notification letters were mailed September 24, 2021. Subaru and Toyota owners may call customer service at 1-844-373-6614. Subaru's number for this recall is WRG-21.
Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗
NHTSA investigations
0
No exact-year investigations in this snapshot.
2020 Subaru Ascent Problems, Complaints & Recalls | Skip That Year
Illustration