IllustrationRECALL 94V029000, FUEL SYSTEM. MANUFACTURER STATES THAT THEY ARE NOT AWARE OF THE RECALL OR THE WORK WAS ALREADY DONE. DEALER. ALSO INDICATES THAT THE PROBLEM WAS TAKEN CARE. SOMEONE DID THE WORK AND DID NOT REPORT IT. DEALER CANNOT DUPLICATE THE PROBLEM, AND IS CHARGING THE CONSUMER TO REMEDY THE PROBLEM. *AK
1993 Saab 9000
Owner reports · Recalls · Investigations
Limited comparison data
There is not enough comparable history to draw a useful model-year comparison.
About this comparison →How this year compares
Owner complaints by model year
Compare all 9000 years →Counts vary with age, sales and reporting. They are not failure rates.
What owners reported most
All reported categories
Tap a category to read its complaints. One report may name several components.
When problems were reported
Mileage at the reported incident
Limited mileage data: 2 of 29 reports include usable mileage. There isn’t enough coverage to show a useful chart.
NHTSA’s mileage field refers to the reported incident, not necessarily the filing date. This shows report counts, not the likelihood of a failure.
What to inspect
Issues worth paying extra attention to based on owner reports.
- Power Train. Review the 9 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
- Engine And Engine Cooling. Review the 4 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
- Fuel System, Gasoline. Review the 4 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
NHTSA owner reports · September 18, 2026 snapshot.
1 crash reports1 fire reports1 injury reports
What owners actually said
29 reportsENGINE FIRE.
CHECK VALVE FROM FUEL PUMP IS CRACKING, CAUSING FUEL TO LEAK UNDER PRESSURE ABOVE THE FUEL TANK. *AK
DRIVER'S SIDE SEATBACK: THE DRIVER'S SIDE SEAT WILL NOT STAY IN PLACE .SEAT CONSTANTLY FALLS BACKWARD. WHEN SEAT FALLS BACKWARDS THE KNOB ON THE SIDE OF THE SEAT SPINS. HAD DEALER LOOK AT IT, BUT THEY COULDN'T FIND THE PROBLEM. *AK
ELECTRICAL SYSTEM SHUT DOWN VEHICLE COMPLETELY.ALL POWER WAS LOST. *AK
WHILE DRIVING, CLUTCH PEDAL STUCK/DID NOT DISENGAGE; VEHICLE KEPT GOING FORWARD, KILLED ENGINE BY APPLYING EMERGENCY BRAKES/FOOT BRAKE; NO WARNING, NEARLY CAUSED ACCIDENT, ALSO REPLACED WORN/CRACKED ENGINE BELT. *AK
ONE OF THE GEARS BROKE IN THE DIFFERENTIAL, CAUSING LEFT FRONT WHEEL TO LOCK AND STEERING TO BECAME UNSTABLE. OWNER HAS DEFECTIVE PARTS. *AK
THE TRACTION CONTROL SYSTEM FAILS AND CAUSES THE VEHICLE TO SHUT DOWN AT 30 TO 40MPH. PLEASE DESCRIBE. *AK
AIR GOT INTO THE BRAKE LINE WHICH CAUSED THE BRAKES NOT TO OPERATE. PLEASE DESCRIBE. TT
Official recalls
599V109000 · Air Bags:frontal:sensor/control MODULE-INACTIVE
May 6, 1999
VEHICLE DESCRIPTION: PASSENGER VEHICLES. MOISTURE CAN ENTER THE AIR BAG INFLATABLE RESTRAINT ELECTRONIC CONTROL MODULE (ECM) AND CAUSE CORROSION ON PORTIONS OF THE ECM PRINTER CIRCUIT BOARDS.
Consequence & remedy
Consequence: THIS CORROSION CAN POSSIBLY CREATE OPEN CONNECTIONS IN CIRCUITS WHICH CONTROL THE RESTRAINT DEPLOYMENT, POSSIBLY CAUSING INADVERTENT AIR BAG DEPLOYMENT.
Remedy: DEALERS WILL INSPECT THE EXTERIOR OF THE ECM. IF THERE IS NO INDICATION OF MOISTURE, A COVER WILL BE INSTALLED OVER THE ECM. IF THERE IS INDICATION OF MOISTURE, THE DEALER WILL REPLACE THE ECM AND INSTALL A COVER OVER THE NEW ECM.
95V067000 · Service Brakes, Hydraulic:antilock/traction Control/electronic Limited Slip:control Unit/module
Mar 29, 1995
MOISTURE CAN FOLLOW THE ELECTRICAL HARNESS AND ENTER THE PRESSURE SWITCH CONNECTOR CAUSING CORROSION AND MALFUNCTION OF THE SWITCH.
Consequence & remedy
Consequence: THE CORROSION CAUSES A DETERIORATION OF THE ELECTRICALSWITCH CONNECTION AND CAN RESULT IN FALSE ILLUMINATION OF ABS AND/OR THE BRAKE WARNING LIGHTS AND/OR THE LOSS OF POWER ASSISTANCE BECAUSE OF NO HYDRAULIC PUMPOPERATION. LOSS OF POWER ASSIST INCREASES THE DRIVER'S BRAKE PEDAL EFFORT REQUIRED FOR STOPPING WHICH CAN RESULT IN EXTENDED BRAKING DISTANCES.
Remedy: DEALERS WILL INSPECT THE ELECTRICAL CONNECTIONS TO THE ABS PRESSURE SWITCH TERMINALS FOR CORROSION AND INSTALL A SHRINK HOSE TO THE WIRING HARNESS TO AVOID MOISTURE ENTERING THE CONNECTION. PRESSURE SWITCHES WITH CORRODED CONNECTORS WILL BE REPLACED.
94V126000 · Engine And Engine Cooling:cooling System
Jul 8, 1994
DURING LOW ENERGY FRONTAL IMPACT COLLISIONS, THE FRONT CROSSMEMBER CAN CONTACT THE METAL TUBING PORTION OF THE COOLER HOSE ASSEMBLY; AND/OR THE HOSE ASSEMBLY CAN BREAK AND LEAK OIL ONTO THE HOT EXHAUST MANIFOLD OR THE TURBOCHARGER.
Consequence & remedy
Consequence: OIL LEAKING ON THESE HOT ENGINE SURFACES CAN IGNITE AND CAUSE A VEHICULAR FIRE.
Remedy: DEALERS WILL INSTALL A PROTECTIVE COVER WHICH WILL PROTECT THE COOLER AND HOSES FROM OTHER STRUCTURAL COMPONENTS IN LOW ENERGY FRONT IMPACTS.
94V108000 · Exterior Lighting:brake Lights:switch
Jun 9, 1994
A NUMBER OF BRAKE LIGHT SWITCHES HAVE AN OVAL-SHAPED PISTON WHICH CAN GET STUCK UNDER CERTAIN CONDITIONS. OTHER SWITCHES WERE MOUNTED SO THAT BOTH LOCKING TABS ARE NOT COMPLETELY ENGAGED IN THE MOUNTING BRACKET. IF ONE SIDE IS NOT ENGAGED, THE SWITCH IS MISALIGNED WITH THE PEDAL MECHANISM AND CAN BIND THE PISTON MOVEMENT, WHICH CAN CAUSE THE BRAKE LIGHT SWITCH TO STICK IN THE "OFF" OR "ON" POSITION.
Consequence & remedy
Consequence: THIS RESULTS IN EITHER THE BRAKE LIGHTS REMAINING ON CONSTANTLY OR THE BRAKE LIGHTS NOT ILLUMINATING WHEN THE BRAKES ARE APPLIED. THIS RESULTS IN INACCURATE SIGNALS OF BRAKE OPERATION TO OTHER VEHICLE OPERATORS, AND COULD RESULT IN AN ACCIDENT.
Remedy: DEALERS WILL INSPECT BRAKE LIGHT SWITCHES. FOR VEHICLES WITH THE OVAL-SHAPED PISTON AND FOR VEHICLES WITH MISALIGNED BRAKE LIGHT SWITCHES, THE BRAKE LIGHT SWITCH WILL BE REPLACED.
94V029000 · Fuel System, Gasoline
Feb 3, 1994
THE FUEL FILLER AND TANK VENTILATION HOSES MAY DEVELOP CRACKS UNDER THE SECURING HOSE CLAMPS, RESULTING IN FUEL LEAKAGE.
Consequence & remedy
Consequence: FUEL LEAKS MAY RESULT IN A FIRE IF AN IGNITION SOURCEIS PRESENT.
Remedy: THE FUEL FILLER AND FUEL VENTILATION HOSES WILL BE REPLACED WITH NEW HOSES. THE FIVE SECURING HOSE CLAMPS WILL BE REPLACED BY A NEW TYPE WITH A SHIELD THAT PREVENTS DAMAGE TO THE HOSE WHEN TIGHTENED.
Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗
NHTSA investigations
1SQ98006 · Audio System Fires
Opened Apr 22, 1998 · Closed May 8, 1998
Status: closed (inferred from source dates) · Electrical System
SEE RESUME FOR DETAILS.