PE25011 · Rivian Edv Seat Belt Anchor Detachment
Opened Sep 22, 2025 · Closed Feb 25, 2026
Status: closed (inferred from source dates) · Seat Belts; Seat Belts:front:anchorage
On September 22, 2025, the Office of Defects Investigation (ODI) opened Preliminary Evaluation (PE) 25011 to investigate and assess allegations of seat belt performance concerns in certain Model Year (MY) 2022-2023 Rivian Electric Delivery Van (EDV). ODI has received fourteen (14) Vehicle Owner Questionnaires (VOQ) reporting potential failures of the driver’s front outboard seat belt anchorage system. The anchorage utilizes a steel-braided cable linked to the seat frame, which supports the seat belt webbing that secures the occupant in the event of a crash. The VOQ describe instances in which the steel-braided cable frayed, unraveled, or completely severed, potentially leaving the occupant inadequately restrained during vehicle operation. A partial or complete separation of the seat belt pretensioner anchor cable can significantly degrade occupant restraint performance in a crash. A damaged cable may also prevent the pretensioner from removing belt slack at the onset of a vehicle crash impact, which could reduce airbag effectiveness and increase the risk of injury. ODI’s investigation sought to determine whether the seat belt assembly’s integrity, design, durability, mounting position, installation method, or manufacturing deficiencies could have contributed to the reported condition. Following the opening of the investigation, Rivian Automotive, LLC (Rivian) determined that the seat belt pretensioner anchor cable contained a safety defect in the subject vehicle population and filed a Part 573 Defect Information Report. Recall 25V-816 is intended to address MY 2022-2025 Rivian EDV vehicles. Rivian has released an over-the-air (OTA) software update and will inspect and replace the driver’s seat belt pretensioner assembly as necessary, free of charge. Owner notification letters are expected to be mailed on January 19, 2026. This recall action seems to resolve the concerns reported by customers. The recall scope includes MY 2024-2025 vehicles in addition to MY 2022-2023 vehicles identified in this investigation. Accordingly, ODI is closing Investigation PE25011. The agency will continue to monitor field performance, complaint trends, and recall completion rates to assess the adequacy of the remedy. ODI reserves the right to take additional action if warranted by future developments. To review the ODI reports cited in this Closing Resume, go to NHTSA.gov and search the associated ODI Report Identification Numbers.
Additional source detail variants (2)
Seat Belts:front:anchorage
On September 22, 2025, the Office of Defects Investigation (ODI) opened Preliminary Evaluation (PE) 25011 to investigate and assess allegations of seat belt performance concerns in certain Model Year (MY) 2022-2023 Rivian Electric Delivery Van (EDV). ODI has received fourteen (14) Vehicle Owner Questionnaires (VOQ) reporting potential failures of the driver’s front outboard seat belt anchorage system. The anchorage utilizes a steel-braided cable linked to the seat frame, which supports the seat belt webbing that secures the occupant in the event of a crash. The VOQ describe instances in which the steel-braided cable frayed, unraveled, or completely severed, potentially leaving the occupant inadequately restrained during vehicle operation. A partial or complete separation of the seat belt pretensioner anchor cable can significantly degrade occupant restraint performance in a crash. A damaged cable may also prevent the pretensioner from removing belt slack at the onset of a vehicle crash impact, which could reduce airbag effectiveness and increase the risk of injury. ODI’s investigation sought to determine whether the seat belt assembly’s integrity, design, durability, mounting position, installation method, or manufacturing deficiencies could have contributed to the reported condition. Following the opening of the investigation, Rivian Automotive, LLC (Rivian) determined that the seat belt pretensioner anchor cable contained a safety defect in the subject vehicle population and filed a Part 573 Defect Information Report. Recall 25V-816 is intended to address MY 2022-2025 Rivian EDV vehicles. Rivian has released an over-the-air (OTA) software update and will inspect and replace the driver’s seat belt pretensioner assembly as necessary, free of charge. Owner notification letters are expected to be mailed on January 19, 2026. This recall action seems to resolve the concerns reported by customers. The recall scope includes MY 2024-2025 vehicles in addition to MY 2022-2023 vehicles identified in this investigation. Accordingly, ODI is closing Investigation PE25011. The agency will continue to monitor field performance, complaint trends, and recall completion rates to assess the adequacy of the remedy. ODI reserves the right to take additional action if warranted by future developments. To review the ODI reports cited in this Closing Resume, go to NHTSA.gov and search the associated ODI Report Identification Numbers.
Seat Belts
On September 22, 2025, the Office of Defects Investigation (ODI) opened Preliminary Evaluation (PE) 25011 to investigate and assess allegations of seat belt performance concerns in certain Model Year (MY) 2022-2023 Rivian Electric Delivery Van (EDV). ODI has received fourteen (14) Vehicle Owner Questionnaires (VOQ) reporting potential failures of the driver’s front outboard seat belt anchorage system. The anchorage utilizes a steel-braided cable linked to the seat frame, which supports the seat belt webbing that secures the occupant in the event of a crash. The VOQ describe instances in which the steel-braided cable frayed, unraveled, or completely severed, potentially leaving the occupant inadequately restrained during vehicle operation. A partial or complete separation of the seat belt pretensioner anchor cable can significantly degrade occupant restraint performance in a crash. A damaged cable may also prevent the pretensioner from removing belt slack at the onset of a vehicle crash impact, which could reduce airbag effectiveness and increase the risk of injury. ODI’s investigation sought to determine whether the seat belt assembly’s integrity, design, durability, mounting position, installation method, or manufacturing deficiencies could have contributed to the reported condition. Following the opening of the investigation, Rivian Automotive, LLC (Rivian) determined that the seat belt pretensioner anchor cable contained a safety defect in the subject vehicle population and filed a Part 573 Defect Information Report. Recall 25V-816 is intended to address MY 2022-2025 Rivian EDV vehicles. Rivian has released an over-the-air (OTA) software update and will inspect and replace the driver’s seat belt pretensioner assembly as necessary, free of charge. Owner notification letters are expected to be mailed on January 19, 2026. This recall action seems to resolve the concerns reported by customers. The recall scope includes MY 2024-2025 vehicles in addition to MY 2022-2023 vehicles identified in this investigation. Accordingly, ODI is closing Investigation PE25011. The agency will continue to monitor field performance, complaint trends, and recall completion rates to assess the adequacy of the remedy. ODI reserves the right to take additional action if warranted by future developments. To review the ODI reports cited in this Closing Resume, go to NHTSA.gov and search the associated ODI Report Identification Numbers.
DP22005 · Pedestrian Alert Sounds
Opened Jan 27, 2023 · Closed Aug 7, 2023
Status: closed (inferred from source dates) · Electrical System:propulsion System
NHTSA received a petition on or about July 18, 2022, requesting that Federal Motor Vehicle Safety Standard (FMVSS) 141 be applied to all electric and hybrid vehicles operating in the United States. The petition can be reviewed at NHTSA.gov under ODI Number 11486072. FMVSS 141 establishes performance requirements for pedestrian alert sounds for motor vehicles. The standard applies to hybrid and electric vehicles that have a gross vehicle weight rating of 4,536 KG or less or are defined as low-speed vehicles. The standard became fully applicable to all such vehicles manufactured on or after March 1, 2021.On January 27, 2023, NHTSA opened Defect Petition (DP) 22-005 to evaluate the subject matter described in the petition. On June 24, 2023 and as supplemented on June 25, 2023, the petitioner notified NHTSA he was withdrawing his petition. The petitioner indicated that, based on his review of data, there is no justification for asserting potential benefits that could be derived from actions sought by my petition. Based on the petitioner's withdrawal, DP22-005 is closed. Closure of this DP does not represent a determination by NHTSA regarding the subject matter of the petition.
Illustration